Automatic merge from submit-queue
Improved code coverage for pkg/kubelet/util.
The test coverage for pkg/kubelet/util.go increased from 45.1%
to 84.3%.
**What this PR does / why we need it**:
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
```
Automatic merge from submit-queue (batch tested with PRs 45685, 45572, 45624, 45723, 45733)
Remove unused fields from Kubelet struct
Just a small attempt to clean up some unused fields in the kubelet struct. This doesn't make any actual code changes.
/assign @mtaufen
Automatic merge from submit-queue (batch tested with PRs 41994, 41969, 41997, 40952, 40576)
Guaranteed admission for Critical Pods
This is the first step in implementing node-level preemption for critical pods.
It defines the AdmissionFailureHandler interface, which allows callers, like the kubelet, to define how failed predicates are handled, and take steps to correct failures if necessary.
In the kubelet's implementation, it triggers preemption if the pod being admitted is critical, and if the only failed predicates are InsufficientResourceErrors, then it prempts (not yet implemented) other other pods to allow admission of the critical pod.
cc: @vishh
Automatic merge from submit-queue (batch tested with PRs 41714, 41510, 42052, 41918, 31515)
Switch scheduler to use generated listers/informers
Where possible, switch the scheduler to use generated listers and
informers. There are still some places where it probably makes more
sense to use one-off reflectors/informers (listing/watching just a
single node, listing/watching scheduled & unscheduled pods using a field
selector).
I think this can wait until master is open for 1.7 pulls, given that we're close to the 1.6 freeze.
After this and #41482 go in, the only code left that references legacylisters will be federation, and 1 bit in a stateful set unit test (which I'll clean up in a follow-up).
@resouer I imagine this will conflict with your equivalence class work, so one of us will be doing some rebasing 😄
cc @wojtek-t @gmarek @timothysc @jayunit100 @smarterclayton @deads2k @liggitt @sttts @derekwaynecarr @kubernetes/sig-scheduling-pr-reviews @kubernetes/sig-scalability-pr-reviews
Where possible, switch the scheduler to use generated listers and
informers. There are still some places where it probably makes more
sense to use one-off reflectors/informers (listing/watching just a
single node, listing/watching scheduled & unscheduled pods using a field
selector).
Automatic merge from submit-queue
Optional configmaps and secrets
Allow configmaps and secrets for environment variables and volume sources to be optional
Implements approved proposal c9f881b7bb
Release note:
```release-note
Volumes and environment variables populated from ConfigMap and Secret objects can now tolerate the named source object or specific keys being missing, by adding `optional: true` to the volume or environment variable source specifications.
```
Automatic merge from submit-queue (batch tested with PRs 37228, 40146, 40075, 38789, 40189)
Cleanup temp dirs
So funny story my /tmp ran out of space running the unit tests so I am cleaning up all the temp dirs we create.
Automatic merge from submit-queue
kubelet bootstrap: start hostNetwork pods before we have PodCIDR
Network readiness was checked in the pod admission phase, but pods that
fail admission are not retried. Move the check to the pod start phase.
Issue #35409
Issue #35521
Automatic merge from submit-queue
Use strongly-typed types.NodeName for a node name
We had another bug where we confused the hostname with the NodeName.
Also, if we want to use different values for the Node.Name (which is
an important step for making installation easier), we need to keep
better control over this.
A tedious but mechanical commit therefore, to change all uses of the
node name to use types.NodeName
We had another bug where we confused the hostname with the NodeName.
To avoid this happening again, and to make the code more
self-documenting, we use types.NodeName (a typedef alias for string)
whenever we are referring to the Node.Name.
A tedious but mechanical commit therefore, to change all uses of the
node name to use types.NodeName
Also clean up some of the (many) places where the NodeName is referred
to as a hostname (not true on AWS), or an instanceID (not true on GCE),
etc.
Automatic merge from submit-queue
Fixed TODO: move predicate check into a pod admitter
refractoring AdmitPod func to move predicate check into a pod admitter
Switch most of the tests in this file to using the assert/require library
(in `github.com/stretchr/testify`) in the tests for better readability and
less code in general.
Automatic merge from submit-queue
Kubelet code move: volume / util
Addresses some odds and ends that I apparently missed earlier. Preparation for kubelet code-move ENDGAME.
cc @kubernetes/sig-node
MTU selection is difficult, and if there is a transport such as IPSEC in
use may be impossible. So we allow specification of the MTU with the
network-plugin-mtu flag, and we pass this down into the network
provider.
Currently implemented by kubenet.
The serviceAccountName is occasionally useful for clients running on
Kube that need to know who they are when talking to other components.
The nodeName is useful for PetSet or DaemonSet pods that need to make
calls back to the API to fetch info about their node.
Both fields are immutable, and cannot easily be retrieved in another
way.
Automatic merge from submit-queue
Always return command output for exec probes and kubelet RunInContainer
Always return command output for exec probes and kubelet RunInContainer, even if the command invocation returns nonzero.
When #24921 replaced RunInContainer with ExecInContainer, it introduced a change where an exec probe that failed no longer included the stdout/stderr from the probe in the event. For example, when running at log level 4, you see:
```
I0816 15:01:36.259826 29713 exec.go:38] Exec probe response: "Failed to access the status endpoint : HTTP Error 404: Not Found.\nHawkular metrics has only been running for 7\n seconds not aborting yet.\n"
```
But the event looks like this:
```
54s 22s 5 hawkular-metrics-hjme4 Pod spec.containers{hawkular-metrics} Warning Unhealthy {kubelet corbeau} Readiness probe failed:
```
Note the absence of the exec probe response after "Readiness probe failed". This PR restores the previous behavior.
cc @kubernetes/rh-cluster-infra @mwringe
xref https://github.com/openshift/origin/issues/10424
Automatic merge from submit-queue
Add volume reconstruct/cleanup logic in kubelet volume manager
Currently kubelet volume management works on the concept of desired
and actual world of states. The volume manager periodically compares the
two worlds and perform volume mount/unmount and/or attach/detach
operations. When kubelet restarts, the cache of those two worlds are
gone. Although desired world can be recovered through apiserver, actual
world can not be recovered which may cause some volumes cannot be cleaned
up if their information is deleted by apiserver. This change adds the
reconstruction of the actual world by reading the pod directories from
disk. The reconstructed volume information is added to both desired
world and actual world if it cannot be found in either world. The rest
logic would be as same as before, desired world populator may clean up
the volume entry if it is no longer in apiserver, and then volume
manager should invoke unmount to clean it up.
Fixes https://github.com/kubernetes/kubernetes/issues/27653
Currently kubelet volume management works on the concept of desired
and actual world of states. The volume manager periodically compares the
two worlds and perform volume mount/unmount and/or attach/detach
operations. When kubelet restarts, the cache of those two worlds are
gone. Although desired world can be recovered through apiserver, actual
world can not be recovered which may cause some volumes cannot be cleaned
up if their information is deleted by apiserver. This change adds the
reconstruction of the actual world by reading the pod directories from
disk. The reconstructed volume information is added to both desired
world and actual world if it cannot be found in either world. The rest
logic would be as same as before, desired world populator may clean up
the volume entry if it is no longer in apiserver, and then volume
manager should invoke unmount to clean it up.
Automatic merge from submit-queue
Support terminal resizing for exec/attach/run
```release-note
Add support for terminal resizing for exec, attach, and run. Note that for Docker, exec sessions
inherit the environment from the primary process, so if the container was created with tty=false,
that means the exec session's TERM variable will default to "dumb". Users can override this by
setting TERM=xterm (or whatever is appropriate) to get the correct "smart" terminal behavior.
```
Fixes#13585
Add support for terminal resizing for exec, attach, and run. Note that for Docker, exec sessions
inherit the environment from the primary process, so if the container was created with tty=false,
that means the exec session's TERM variable will default to "dumb". Users can override this by
setting TERM=xterm (or whatever is appropriate) to get the correct "smart" terminal behavior.
Automatic merge from submit-queue
Reorganize volume controllers and manager
* Move both PV and attach/detach volume controllers to `controllers/volume` (closes#26222)
* Rename `kubelet/volume` to `kubelet/volumemanager`
* Add/update OWNER files
Chao Xu