github
/
k3s
mirror of https://github.com/k3s-io/k3s
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
3,348 Commits
32 Branches
867 Tags
626 MiB
Commit Graph

192 Commits (a809749edc51467860d05b633c40c64f5aafcc61)

Author SHA1 Message Date
Brad Davidson ffe72eecc4 Address issues with etcd snapshots 
* Increase the default snapshot timeout. The timeout is not currently
  configurable from Rancher, and larger clusters are frequently seeing
  uploads fail at 30 seconds.
* Enable compression for scheduled snapshots if enabled on the
  command-line. The CLI flag was not being passed into the etcd config.
* Only set the S3 content-type to application/zip if the file is zipped.
* Don't run more than one snapshot at once, to prevent misconfigured
  etcd snapshot cron schedules from stacking up.

Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
 2022-07-12 14:41:38 -07:00
Derek Nola a9b5a1933f
Delay service readiness until after startuphooks have finished (#5649) 
* Move startup hooks wg into a runtime pointer, check before notifying systemd
* Switch default systemd notification to server
* Add 1 sec delay to allow etcd to write to disk
Signed-off-by: Derek Nola <derek.nola@suse.com>
 2022-06-15 09:00:52 -07:00
Darren Shepherd e6009b1edf Introduce servicelb-namespace parameter 
This parameter controls which namespace the klipper-lb pods will be create.
It defaults to kube-system so that k3s does not by default create a new
namespace. It can be changed if users wish to isolate the pods and apply
some policy to them.

Signed-off-by: Darren Shepherd <darren@acorn.io>
 2022-06-14 15:48:58 -07:00
Igor 2999289e68
add support for pprof server (#5527) 
Signed-off-by: igor <igor@igor.io>
 2022-06-13 22:06:55 -07:00
Brad Davidson 9d7230496d Add support for configuring the EgressSelector mode 
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
 2022-05-18 13:26:10 -07:00
Michal Rostecki 5f2a4d4209 server: Allow to enable network policies with IPv6-only 
After previous changes, network policies are working on IPv6-only
installations.

Signed-off-by: Michal Rostecki <vadorovsky@gmail.com>
 2022-04-29 10:51:38 -07:00
Brad Davidson 418c3fa858
Fix issue with datastore corruption on cluster-reset (#5515) 
* Bump etcd to v3.5.4-k3s1
* Fix issue with datastore corruption on cluster-reset
* Disable unnecessary components during cluster reset

Disable control-plane components and the tunnel setup during
cluster-reset, even when not doing a restore. This reduces the amount of
log clutter during cluster reset/restore, making any errors encountered
more obvious.

Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
 2022-04-27 13:44:15 -07:00
Manuel Buil 6a8de31a92
Fix default ipv6 cidr (#5467) 
Signed-off-by: Manuel Buil <mbuil@suse.com>
 2022-04-20 08:41:41 -07:00
Brad Davidson b12cd62935 Move IPv4/v6 selection into helpers 
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
 2022-04-15 01:02:42 -07:00
Michal Rostecki c707948adf netpol: Add dual-stack support 
This change allows to define two cluster CIDRs for compatibility with
Kubernetes dual-stuck, with an assumption that two CIDRs are usually
IPv4 and IPv6.

It does that by levearaging changes in out kube-router fork, with the
following downstream release:

https://github.com/k3s-io/kube-router/releases/tag/v1.3.2%2Bk3s

Signed-off-by: Michal Rostecki <vadorovsky@gmail.com>
 2022-04-06 14:43:09 +02:00
Roberto Bonafiglia 4afeb9c5c7
Merge pull request #5325 from rbrtbnfgl/fix-etcd-ipv6-url 
Fixed etcd URL in case of IPv6 address
 2022-04-05 09:55:42 +02:00
Roberto Bonafiglia e29771b9ff Fixed client URL 
Signed-off-by: Roberto Bonafiglia <roberto.bonafiglia@suse.com>
 2022-03-30 10:59:39 +02:00
Roberto Bonafiglia dda409b041 Updated localhost address on IPv6 only setup 
Signed-off-by: Roberto Bonafiglia <roberto.bonafiglia@suse.com>
 2022-03-29 09:35:54 +02:00
Brad Davidson e811689df9 Fix etcd-only secrets encryption rotation 
Improve feedback when running secrets-encrypt commands on etcd-only nodes, and
allow etcd-only nodes to properly restart when effecting rotation.

Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
 2022-03-25 10:40:58 -07:00
Roberto Bonafiglia 073f155fc4 Added ipv6 only support with flannel 
Signed-off-by: Roberto Bonafiglia <roberto.bonafiglia@suse.com>
 2022-03-09 09:35:01 +01:00
Roberto Bonafiglia 3fabc0703b
Merge pull request #4450 from olljanat/support-ipv6-only 
Add partial support for IPv6 only mode
 2022-03-08 11:38:52 +01:00
Luther Monson 9a849b1bb7
[master] changing package to k3s-io (#4846) 
* changing package to k3s-io

Signed-off-by: Luther Monson <luther.monson@gmail.com>

Co-authored-by: Derek Nola <derek.nola@suse.com>
 2022-03-02 15:47:27 -08:00
Brad Davidson f090bf2d5e Bootstrap the executor even when the agent is disabled 
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
 2022-03-02 02:47:54 -08:00
Brad Davidson 5014c9e0e8 Fix adding etcd-only node to existing cluster 
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
 2022-02-28 19:56:08 -08:00
Olli Janatuinen 966f4d6a01 Add support for IPv6 only mode 
Automatically switch to IPv6 only mode if first node-ip is IPv6 address

Signed-off-by: Olli Janatuinen <olli.janatuinen@gmail.com>
 2022-02-10 20:34:59 +02:00
Roberto Bonafiglia bb856c67dc
Merge pull request #4952 from rbrtbnfgl/ipv6-nat 
Add IPv6 NAT
 2022-01-19 08:44:57 +01:00
Brad Davidson b1e0f4c8fc Skip CGroup v2 evac when agent is disabled 
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
 2022-01-14 13:24:44 -08:00
Roberto Bonafiglia 111c1669fc Added flannel-ipv6-masq flag to enable IPv6 nat 
Signed-off-by: Roberto Bonafiglia <roberto.bonafiglia@gmail.com>
 2022-01-14 18:35:37 +01:00
Brad Davidson a0cadcd343 Move ClusterResetRestore handling ControlConfig setup 
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
 2022-01-12 10:46:10 -08:00
Lordran 31f1a00b6f
Fix a typo: advertise-up -> advertise-ip (#4827) 
Signed-off-by: 胥朝阳 <xuzhaoyang@91cyt.com>
 2022-01-06 08:52:07 -08:00
Hussein Galal 2e91913f54
Close agentReady channel only in k3s (#4792) 
* Close agentReady channel only in k3s

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* codespell check

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>
 2021-12-21 00:22:49 +02:00
Hussein Galal d71b335871
Fix snapshot restoration on fresh nodes (#4737) 
Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>
 2021-12-14 02:04:39 +02:00
Hussein Galal 03485632ea
Fix regression with cluster reset (#4521) 
* Fix regression with cluster reset

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* typo

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>
 2021-11-17 23:22:18 +02:00
Chris Kim f18b3252c0
[master] Add etcd extra args support for K3s (#4463) 
* Add etcd extra args support for K3s

Signed-off-by: Chris Kim <oats87g@gmail.com>

* Add etcd custom argument integration test

Signed-off-by: Chris Kim <oats87g@gmail.com>

* go generate

Signed-off-by: Chris Kim <oats87g@gmail.com>
 2021-11-11 21:03:15 -08:00
Manuel Buil 5d168a1d59 Allow svclb pod to enable ipv6 forwarding 
Signed-off-by: Manuel Buil <mbuil@suse.com>
 2021-11-10 18:20:03 +01:00
Luther Monson 36c6634cce
[master] updating to new signals package in wrangler (#4399) 
* updating to new signals package in wrangler

Signed-off-by: Luther Monson <luther.monson@gmail.com>
 2021-11-08 08:32:43 -07:00
Brian Downs 0452f017c1
Add etcd s3 timeout (#4207) 2021-10-15 10:24:14 -07:00
Brad Davidson 5a923ab8dc Add containerd ready channel to delay etcd node join 
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
 2021-10-14 14:03:52 -07:00
Brad Davidson dc18ef2e51 Refactor log and reaper exec to omit MAINPID 
Using MAINPID breaks systemd's exit detection, as it stops watching the
original pid, but is unable to watch the new pid as it is not a child
of systemd itself. The best we can do is just notify when execing the child
process.

We also need to consolidate forking into a sigle place so that we don't
end up with multiple levels of child processes if both redirecting log
output and reaping child processes.

Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
 2021-10-12 13:35:10 -07:00
Brian Downs ac7a8d89c6
Add ability to reconcile bootstrap data between datastore and disk (#3398) 2021-10-07 12:47:00 -07:00
Brad Davidson a16105b348 Properly handle operation as init process 
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
 2021-09-28 11:05:34 -07:00
Hussein Galal 7826407a2e
Make sure there are no duplicates in etcd member list (#4025) 
* Make sure there are no duplicates in etcd member list

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* fix node names with hyphens

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* use full server name for etcd node name

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>
 2021-09-18 00:51:18 +02:00
Manuel Buil 9fcd79baae Add tests to the dual-stack PR and enable dual-stack with flannel backend 
Signed-off-by: Manuel Buil <mbuil@suse.com>
 2021-09-15 14:11:54 +02:00
Devin Buhl a1ec43e0b7
feat: add option to disable s3 over https 
Signed-off-by: Devin Buhl <devin.kray@gmail.com>
 2021-09-05 12:03:49 -04:00
Brad Davidson cf12a13175 Add missing node name entry to apiserver SAN list 
Also honor node-ip when adding the node address to the SAN list, instead
of hardcoding the autodetected IP address.

Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
 2021-09-01 13:22:32 -07:00
Brad Davidson b8add39b07 Bump kine for metrics/tls changes 
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
 2021-09-01 01:51:30 -07:00
Hussein Galal e322924781
Reset load balancer state during restoraion (#3877) 
* Reset load balancer state during restoraion

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* Reset load balancer state during restoraion

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>
 2021-08-18 01:02:30 +02:00
Hussein Galal 2069cdf4ee
Fix initial start of etcd only nodes (#3748) 
* Fix initial start of etcd only nodes

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* more fixes

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* more fixes

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>
 2021-08-03 19:53:21 +02:00
Brad Davidson 869b98bc4c Sync DisableKubeProxy into control struct 
Sync DisableKubeProxy from cfg into control before sending control to clients,
as it may have been modified by a startup hook.

Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
 2021-07-30 12:26:50 -07:00
Hussein Galal b1b5f72dc3
Notify systemd for etcd only node (#3732) 
Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>
 2021-07-29 23:42:19 +02:00
Brian Downs 238dc2086e
prevent snapshot save when snapshots are disabled (#3475) 
* prevent snapshot save when snapshots are disabled
 2021-07-09 10:22:49 -07:00
Joe Kralicky a84c75af62 Adds a command-line flag '--disable-helm-controller' that will disable 
the server's built-in helm controller.

Problem:
Testing installation and uninstallation of the Helm Controller on k3s is
not possible if the Helm Controller is baked into the k3s server.

Solution:
The Helm Controller can optionally be disabled, which will allow users
to manage its installation manually.

Signed-off-by: Joe Kralicky <joe.kralicky@suse.com>
 2021-06-25 14:54:36 -04:00
Hussein Galal 136dddca11
Fix storing bootstrap data with empty token string (#3422) 
* Fix storing bootstrap data with empty token string

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* delete node password secret after restoration

fixes to bootstrap key

vendor update

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* fix comment

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* fix typo

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* more fixes

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* fixes

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* fixes

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* typos

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* Removing dynamic listener file after restoration

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* go mod tidy

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>
 2021-06-22 22:42:34 +02:00
Brian Downs 88f95ec409
Send systemd notifications for both server and agent (#3430) 
* update agent to sent systemd notify after everything starts
 2021-06-15 04:20:26 -07:00
Brian Downs 2682183773 add log message indicating etcd snapshots are disabled 
Signed-off-by: Brian Downs <brian.downs@gmail.com>
 2021-06-04 09:18:16 -07:00
Brad Davidson 02a5bee62f
Add system-default-registry support and remove shared code (#3285) 
* Move registries.yaml handling out to rancher/wharfie
* Add system-default-registry support
* Add CLI support for kubelet image credential providers

Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
 2021-05-10 15:58:41 -07:00
Hussein Galal f410fc7d1e
Invoke cluster reset function when only reset flag is passed (#3276) 
Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>
 2021-05-05 17:40:04 +02:00
Brad Davidson 2705431d96
Add support for dual-stack Pod/Service CIDRs and node IP addresses (#3212) 
* Add support for dual-stack cluster/service CIDRs and node addresses

Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
 2021-04-21 15:56:20 -07:00
Chris Kim 69f96d6225
Define a Controllers and LeaderControllers on the server config (#3043) 
Signed-off-by: Chris Kim <oats87g@gmail.com>
 2021-03-11 10:39:00 -08:00
Brad Davidson 7cdfaad6ce
Always use static ports for client load-balancers (#3026) 
* Always use static ports for the load-balancers

This fixes an issue where RKE2 kube-proxy daemonset pods were failing to
communicate with the apiserver when RKE2 was restarted because the
load-balancer used a different port every time it started up.

This also changes the apiserver load-balancer port to be 1 below the
supervisor port instead of 1 above it. This makes the apiserver port
consistent at 6443 across servers and agents on RKE2.

Additional fixes below were required to successfully test and use this change
on etcd-only nodes.

* Actually add lb-server-port flag to CLI
* Fix nil pointer when starting server with --disable-etcd but no --server
* Don't try to use full URI as initial load-balancer endpoint
* Fix etcd load-balancer pool updates
* Update dynamiclistener to fix cert updates on etcd-only nodes
* Handle recursive initial server URL in load balancer
* Don't run the deploy controller on etcd-only nodes
 2021-03-06 02:29:57 -08:00
Brian Downs 4d1f9eda9d
Etcd Snapshot/Restore to/from S3 Compatible Backends (#2902) 
* Add functionality for etcd snapshot/restore to and from S3 compatible backends.
* Update etcd restore functionality to extract and write certificates and configs from snapshot.
 2021-03-03 11:14:12 -07:00
galal-hussein d6124981d5 remove etcd member if disable etcd is passed 
Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>
 2021-03-01 23:50:50 +02:00
Hussein Galal 5749f66aa3
Add disable flags for control components (#2900) 
* Add disable flags to control components

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* golint

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* more fixes

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* fixes to disable flags

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* Add comments to functions

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* Fix joining problem

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* more fixes

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* golint

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* fix ticker

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* fix role labels

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* more fixes

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>
 2021-02-12 17:35:57 +02:00
Brad Davidson 07256cf7ab Add ServiceIPRange and ServiceNodePortRange to agent config 
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
 2021-02-03 10:41:51 -08:00
Yuriy 06fda7accf
Add functionality to bind custom IP address for Etcd metrics endpoint (#2750) 
* Add functionality to bind custom IP address for Etcd metrics endpoint

Signed-off-by: yuriydzobak <yurii.dzobak@lotusflare.com>
 2021-01-22 17:40:48 -08:00
Brian Downs 13229019f8
Add ability to perform an etcd on-demand snapshot via cli (#2819) 
* add ability to perform an etcd on-demand snapshot via cli
 2021-01-21 14:09:15 -07:00
Brad Davidson c6950d2cb0 Update Kubernetes to v1.20.0-k3s1 
Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
 2020-12-08 22:51:34 -08:00
MonzElmasry e8436cc76b
Make etcd use node private ip 
Signed-off-by: MonzElmasry <menna.elmasry@rancher.com>
 2020-10-28 23:45:24 +02:00
Brian Downs ba70c41cce
Initial Logging Output Update (#2246) 
This attempts to update logging statements to make them consistent
through out the code base. It also adds additional context to messages
where possible, simplifies messages, and updates level where necessary.
 2020-09-21 09:56:03 -07:00
Darren Shepherd 7657ed2e13
Update pkg/cli/server/server.go 
Co-authored-by: Jacob Blain Christen <dweomer5@gmail.com>
 2020-09-01 10:43:19 -07:00
Darren Shepherd ae5c585050 Revert "Add config file support" 
This reverts commit e1dc3451bc.

Signed-off-by: Darren Shepherd <darren@rancher.com>
 2020-08-29 21:44:07 -07:00
Brian Downs 866dc94cea
Galal hussein etcd backup restore (#2154) 
* Add etcd snapshot and restore

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* fix error logs

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* goimports

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* fix flag describtion

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* Add disable snapshot and retention

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* use creation time for snapshot retention

Signed-off-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>

* unexport method, update var name

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* adjust snapshot flags

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* update var name, string concat

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* revert previous change, create constants

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* update

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* updates

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* type assertion error checking

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* update

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* update

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* update

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* pr remediation

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* pr remediation

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* pr remediation

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* pr remediation

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* pr remediation

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* updates

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* updates

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* simplify logic, remove unneeded function

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* update flags

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* update flags

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* add comment

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* exit on restore completion, update flag names, move retention check

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* exit on restore completion, update flag names, move retention check

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* exit on restore completion, update flag names, move retention check

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* update disable snapshots flag and field names

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* move function

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* update field names

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* update var and field names

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* update var and field names

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* update defaultSnapshotIntervalMinutes to 12 like rke

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* update directory perms

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* update etc-snapshot-dir usage

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* update interval to 12 hours

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* fix usage typo

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* add cron

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* add cron

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* add cron

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* wire in cron

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* wire in cron

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* wire in cron

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* wire in cron

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* wire in cron

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* wire in cron

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* wire in cron

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* update deps target to work, add build/data target for creation, and generate

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* remove dead make targets

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* error handling, cluster reset functionality

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* error handling, cluster reset functionality

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* update

Signed-off-by: Brian Downs <brian.downs@gmail.com>

* remove intermediate dapper file

Signed-off-by: Brian Downs <brian.downs@gmail.com>

Co-authored-by: galal-hussein <hussein.galal.ahmed.11@gmail.com>
 2020-08-28 16:57:40 -07:00
Brian Downs fa2c1422b3 change name of variable 
Signed-off-by: Brian Downs <brian.downs@gmail.com>
 2020-08-19 14:30:53 -07:00
Brian Downs a4b2953017 add setup hook capabilities for rke2 
Signed-off-by: Brian Downs <brian.downs@gmail.com>
 2020-08-19 13:42:45 -07:00
Brad Davidson 79c499f0e0 Fix handling of TLS configuration args 
Also fixes an unrelated error formatting issue turned up while testing.

Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
 2020-08-18 16:44:10 -07:00
Brad Davidson 1eec7348a5 Call setproctitle to conceal node args in ps output 
This is related to #2014.

Signed-off-by: Brad Davidson <brad.davidson@rancher.com>
 2020-07-28 15:49:49 -07:00
Erik Wilson e1dc3451bc
Add config file support 2020-07-10 10:34:00 -07:00
Darren Shepherd 7e59c0801e Make program name a variable to be changed at compile time 2020-06-06 16:39:41 -07:00
Chuck Schweizer 19c34bd12d Update to set default CipherSuites 
The default CipherSuites need to be set to disable the insecure TLS 1.2 TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 Cipher
 2020-05-13 08:34:45 -05:00
Chuck Schweizer ca9c9c2e1e Adding support for TLS MinVersion and CipherSuites 
This will watch for the following kube-apiserver-arg variables and apply
them to the k3s kube-apiserver https listener.

  --kube-apiserver-arg=tls-cipher-suites=XXXXXXX
  --kube-apiserver-arg=tls-min-version=XXXXXXX
 2020-05-07 09:27:09 -05:00
Darren Shepherd cb4b34763e
Merge pull request #1759 from ibuildthecloud/background 
Start kube-apiserver in the background
 2020-05-06 21:50:48 -07:00
Darren Shepherd 072396f774 Start kube-apiserver in the background 
In rke2 everything is a static pod so this causes a chicken and egg situation
in which we need the kubelet running before the kube-apiserver can be
launched.  By starting the apiserver in the background this allows us to
do this odd bootstrapping.
 2020-05-06 21:17:23 -07:00
Darren Shepherd 2f5ee914f9 Add supervisor port 
In k3s today the kubernetes API and the /v1-k3s API are combined into
one http server.  In rke2 we are running unmodified, non-embedded Kubernetes
and as such it is preferred to run k8s and the /v1-k3s API on different
ports.  The /v1-k3s API port is called the SupervisorPort in the code.

To support this separation of ports a new shim was added on the client in
then pkg/agent/proxy package that will launch two load balancers instead
of just one load balancer.  One load balancer for 6443 and the other
for 9345 (which is the supervisor port).
 2020-05-05 15:54:51 -07:00
Darren Shepherd 341895c322 Don't write ccm.yaml if --disable-cloud-controller is set 2020-05-05 13:01:52 -07:00
Erik Wilson c941e1d0bb
Merge pull request #1695 from ibuildthecloud/kubeproxy 
Add ability to disable kubeproxy
 2020-05-04 20:26:22 -07:00
Darren Shepherd 5715e1ba0d Add ability to disable kubeproxy 2020-04-27 11:24:00 -07:00
Darren Shepherd 8b8af94eb2 Move disabled items to a const to keep more consistency 
This also help when embedding k3s because we can programmitically know
all the components to disable.
 2020-04-27 11:15:35 -07:00
Erik Wilson 0374c4f63d Add --disable flag 2020-01-30 16:45:01 -07:00
Erik Wilson 1a2690d7be
Merge pull request #1192 from galal-hussein/add_encryption_config 
Add secret encryption config
 2020-01-27 13:59:09 -07:00
galal-hussein 388cd9c4e8 Add secret encryption configuration 2019-12-23 13:16:27 +02:00
Erik Wilson 76281bf731 Update k3s for k8s 1.17.0 2019-12-15 23:28:19 -07:00
galal-hussein 99b8222e8d Change storage to datastore 2019-11-15 21:52:07 -07:00
Erik Wilson 95ff805c98 Fix broken K3S_TOKEN env 2019-11-14 12:42:42 -07:00
Erik Wilson 47a94637dc Move metrics-server manifests to sub-directory 2019-11-05 14:30:50 -07:00
Darren Shepherd ba240d0611 Refactor tokens, bootstrap, and cli args 2019-10-30 19:06:49 -07:00
YAMAMOTO Takashi 4970d6133f Propagate DisableAgent flag 
The recent setMasterRoleLabel stuff uses it.
 2019-10-28 14:43:53 +09:00
Akihiro Suda aafccdbccb rootless: add kubelet flags automatically 
Fix https://github.com/rancher/k3s/issues/784

Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
 2019-10-25 17:10:14 +09:00
Erik Wilson da3a7c6bbc Add network policy controller 2019-10-18 16:11:42 -07:00
Erik Wilson 9e14d3e470
Merge pull request #851 from MagnaXSoftware/switch-string-slice 
Add comma-separated no-deploy values
 2019-10-16 16:00:46 -07:00
Xavier Landreville 2f4a08c54d Add comma-separated no-deploy values 
This allows no-deploy values to be either specified as multiple --no-deploy invocations,
or a single invocation with comma-separated values.
 2019-10-16 15:51:04 -04:00
galal-hussein d2c1f66496 Add k3s cloud provider 2019-10-16 21:13:15 +02:00
galal-hussein 56e0e5ad7e Add default local storage provisioner 2019-09-30 18:17:33 +02:00
Erik Wilson 959acf9c92 Add --flannel-backend flag 2019-09-27 18:26:39 -07:00
galal-hussein b1891f445b Add master role label on startup 2019-09-27 23:04:24 +02:00
Darren Shepherd 209acb58c1 Revert CSI patch 2019-08-31 22:39:24 -07:00