Automatic merge from submit-queue
keep docker0 with private cidr range
fixes: #31465
Keep docker0 when using kubenet on GCI. Assign 169.254.123.1/24 to docker0 to avoid cidr conflict.
Automatic merge from submit-queue
gci: decouple from the built-in kubelet version
Prior to this change, configure.sh would:
(1) compare versions of built-in kubelet and downloaded kubelet, and
(2) bind-mount downloaded kubelet at /usr/bin/kubelet in case of
version mismatch
With this change, configure.sh:
(1) compares the two versions only on test clusters, and
(2) uses the actual file paths to start kubelet w/o any bind-mounting
To allow (2), this change also provides its own version of kubelet
systemd service file.
Effectively with this change we will always use the downloaded kubelet
binary along with its own systemd service file on non-test clusters. The
main advantage is this change does not rely on the kubelet being built in to
the OS image.
@dchen1107 @wonderfly can you please review
cc/ @kubernetes/goog-image FYI
Prior to this change, configure.sh would:
(1) compare versions of built-in kubelet and downloaded kubelet, and
(2) bind-mount downloaded kubelet at /usr/bin/kubelet in case of
version mismatch
With this change, configure.sh:
(1) compares the two versions only on test clusters, and
(2) uses the actual file paths to start kubelet w/o any bind-mounting
To allow (2), this change also provides its own version of kubelet
systemd service file.
Effectively with this change we will always use the downloaded kubelet
binary along with its own systemd service file on non-test clusters. The
main advantage is this change does not rely on the kubelet being built in to
the OS image.
Automatic merge from submit-queue
Support for creation/removal of master replicas.
HA master: initial support for creation/removal of masters replicas by
kube-up/kube-down scripts for GCE on gci (other distributions, including debian, are not supported yet).
Automatic merge from submit-queue
Avoid unnecessary copies on GCI initialization.
The issue I faced was that when starting a cluster I was getting:
```
Aug 12 11:12:46 e2e-test-wojtekt-master configure.sh[1079]: cp: error writing '/home/kubernetes/kubernetes-src.tar.gz': No space left on device
```
This PR reduces amount of space that is needed on startup, as well as this speeds up starting cluster.
@lavalamp @dchen1107
Automatic merge from submit-queue
Add support for kube-up.sh to deploy Calico network policy to GCI masters
Also remove requirement for calicoctl from Debian / salt installed nodes and clean it up a little by deploying calico-node with a manifest rather than calicoctl. This also makes it more reliable by retrying properly.
How to use:
```
make quick-release
NETWORK_POLICY_PROVIDER=calico cluster/kube-up.sh
```
One place where I was uncertain:
- CPU allocations (on the master particularly, where there's very little spare capacity). I took some from etcd, but if there's a better way to decide this, I'm happy to change it.
<!-- Reviewable:start -->
---
This change is [<img src="https://reviewable.kubernetes.io/review_button.svg" height="34" align="absmiddle" alt="Reviewable"/>](https://reviewable.kubernetes.io/reviews/kubernetes/kubernetes/29037)
<!-- Reviewable:end -->
Automatic merge from submit-queue
AWS/GCE: Rework use of master name
* Add a pillar for `hostname` (because even if there's a good Salt function for it, I don't trust it to return the short hostname)
* Move `INITIAL_ETCD_CLUSTER` to just the GCE turn-up
* Remove `master_name`, which isn't needed
* Add a pillar for hostname (because even if there's a good Salt
function for it, I don't trust it to return the short hostname)
* Move INITIAL_ETCD_CLUSTER to just the GCE turn-up
* Remove the master_name, which isn't needed as a pillar
Automatic merge from submit-queue
[Garbage Collector] add e2e tests again
#27151 is reverted because gke didn't start correctly after it's merged (https://github.com/kubernetes/kubernetes/pull/27151#issuecomment-233030686).
The possible problem is the `unbound variable`, which is fixed in the second commit of this PR. However, I cannot verify if the PR will fail the gke suite since I don't have the environment to run that suite.
@wojtek-t @lavalamp
Particularly on smaller instances on AWS, we were hitting the 80 second
timeout now that our image is well over the 1GB mark.
Increase the timeout from 80 seconds to 300 seconds.
Fix#29418
Automatic merge from submit-queue
fix logrotate config (again)
we need to add the dateformat option so that the logrotate
can create unique logfiles for each rotation. Without this,
logrotation is skipped with message like (generated in
verbose mode of logrotate):
rotating log /var/log/rotate-test.log, log->rotateCount is 5
dateext suffix '-20160718'
glob pattern '-[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]'
destination /var/log/rotate-test2.log-20160718.gz already exists, skipping rotation
Tested as follows:
# config in '/etc/logrotate.d/rotate-test':
/var/log/rotate-test.log {
rotate 5
copytruncate
missingok
notifempty
compress
maxsize 100M
daily
dateext
dateformat -%Y%m%d-%s
create 0644 root root
}
# create 150Mb of /var/log/rotate-test.log
$ dd if=/dev/zero of=/var/log/rotate-test.log bs=1048576 count=150 conv=notrunc oflag=append
# run logrotate
$ /usr/sbin/logrotate -v /etc/logrotate.conf
...
rotating pattern: /var/log/rotate-test.log after 1 days (5 rotations)
empty log files are not rotated, log files >= 104857600 are rotated earlier, old logs are removed
considering log /var/log/rotate-test.log
log needs rotating
rotating log /var/log/rotate-test.log, log->rotateCount is 5
Converted ' -%Y%m%d-%s' -> '-%Y%m%d-%s'
dateext suffix '-20160718-1468875268'
glob pattern '-[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]-[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]'
copying /var/log/rotate-test.log to /var/log/rotate-test.log-20160718-1468875268
truncating /var/log/rotate-test.log
compressing log with: /bin/gzip
Repeating 'dd' and 'logrotate' commands now generate logfiles correctly.
#27754
@bprashanth can you please review?
we need to add the dateformat option so that the logrotate
can create unique logfiles for each rotation. Without this,
we logrotation is skipped with message like (generated in
verbose mode of logrotate):
rotating log /var/log/rotate-test.log, log->rotateCount is 5
dateext suffix '-20160718'
glob pattern '-[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]'
destination /var/log/rotate-test2.log-20160718.gz already exists, skipping rotation
Tested as follows:
# config in '/etc/logrotate.d/rotate-test':
/var/log/rotate-test.log {
rotate 5
copytruncate
missingok
notifempty
compress
maxsize 100M
daily
dateext
dateformat -%Y%m%d-%s
create 0644 root root
}
# create 150Mb of /var/log/rotate-test.log
$ dd if=/dev/zero of=/var/log/rotate-test.log bs=1048576 count=150 conv=notrunc oflag=append
# run logrotate
$ /usr/sbin/logrotate -v /etc/logrotate.conf
...
rotating pattern: /var/log/rotate-test.log after 1 days (5 rotations)
empty log files are not rotated, log files >= 104857600 are rotated earlier, old logs are removed
considering log /var/log/rotate-test.log
log needs rotating
rotating log /var/log/rotate-test.log, log->rotateCount is 5
Converted ' -%Y%m%d-%s' -> '-%Y%m%d-%s'
dateext suffix '-20160718-1468875268'
glob pattern '-[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]-[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]'
copying /var/log/rotate-test.log to /var/log/rotate-test.log-20160718-1468875268
truncating /var/log/rotate-test.log
compressing log with: /bin/gzip
Repeating 'dd' and 'logrotate' commands now generate logfiles correctly.
Automatic merge from submit-queue
[garbage collector] add e2e test
This PR also includes some changes to plumb controller-manager's `--enable_garbage_collector` from the environment variable.
The e2e test will not be run by the core suite because it's marked `[Feature:GarbageCollector]`.
The corresponding jenkins job configuration PR is https://github.com/kubernetes/test-infra/pull/132.
Kubernetes Submit Queue
