Automatic merge from submit-queue (batch tested with PRs 40299, 40311)
move authoritative client-go util out of pkg
Move `client-go/pkg/util` which are authoritative to `client-go/util` to make it easier to reason about what comes from where.
Automatic merge from submit-queue
Adding rescan scsi controller for cinder
For lsilogic scsi controller, attached cinder volume does not
appear under /dev/ automatically unless do a rescan.
This approach was used in vSphere volume provider before PR #27496
dropped support for lsilogic scsi controller.
Automatic merge from submit-queue
Curating Owners: pkg/volume
cc @jsafrane @spothanis @agonzalezro @justinsb @johscheuer @simonswine @nelcy @pmorie @quofelix @sdminonne @thockin @saad-ali @rootfs
In an effort to expand the existing pool of reviewers and establish a
two-tiered review process (first someone lgtms and then someone
experienced in the project approves), we are adding new reviewers to
existing owners files.
If You Care About the Process:
------------------------------
We did this by algorithmically figuring out who’s contributed code to
the project and in what directories. Unfortunately, that doesn’t work
well: people that have made mechanical code changes (e.g change the
copyright header across all directories) end up as reviewers in lots of
places.
Instead of using pure commit data, we generated an excessively large
list of reviewers and pruned based on all time commit data, recent
commit data and review data (number of PRs commented on).
At this point we have a decent list of reviewers, but it needs one last
pass for fine tuning.
Also, see https://github.com/kubernetes/contrib/issues/1389.
TLDR:
-----
As an owner of a sig/directory and a leader of the project, here’s what
we need from you:
1. Use PR https://github.com/kubernetes/kubernetes/pull/35715 as an example.
2. The pull-request is made editable, please edit the `OWNERS` file to
remove the names of people that shouldn't be reviewing code in the
future in the **reviewers** section. You probably do NOT need to modify
the **approvers** section. Names asre sorted by relevance, using some
secret statistics.
3. Notify me if you want some OWNERS file to be removed. Being an
approver or reviewer of a parent directory makes you a reviewer/approver
of the subdirectories too, so not all OWNERS files may be necessary.
4. Please use ALIAS if you want to use the same list of people over and
over again (don't hesitate to ask me for help, or use the pull-request
above as an example)
Automatic merge from submit-queue (batch tested with PRs 39152, 39142, 39055)
openstack: Forcibly detach an attached cinder volume before attaching elsewhere
Fixes#33288
**What this PR does / why we need it**:
Without this fix, we can't preemptively reschedule pods with persistent volumes to other hosts (for rebalancing or hardware failure recovery).
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#33288
**Special notes for your reviewer**:
(This is a resurrection/cleanup of PR #33734, originally authored by @Rotwang)
**Release note**:
For lsilogic scsi controller, attached cinder volume does not
appear under /dev/ automatically unless do a rescan.
This approach was used in vSphere volume provider before PR #27496
dropped support for lsilogic scsi controller.
This PR is to fix the issue in converting aws volume id from mount
paths. Currently there are three aws volume id formats supported. The
following lists example of those three formats and their corresponding
global mount paths:
1. aws:///vol-123456
(/var/lib/kubelet/plugins/kubernetes.io/aws-ebs/mounts/aws/vol-123456)
2. aws://us-east-1/vol-123456
(/var/lib/kubelet/plugins/kubernetes.io/mounts/aws/us-est-1/vol-123455)
3. vol-123456
(/var/lib/kubelet/plugins/kubernetes.io/mounts/aws/us-est-1/vol-123455)
For the first two cases, we need to check the mount path and convert
them back to the original format.
Automatic merge from submit-queue
Remove unused WaitForDetach from Detacher interface and plugins
See issue #33128 and PR #33270
We can't rely on the device name provided by OpenStack Cinder, and thus
must perform detection based on the drive serial number (aka It's cinder ID)
on the kubelet itself.
This needs to be removed now, as part of #33128, as the code can't be
updated to attempt device detection and fallback through to the Cinder
provided deviceName, as detection "fails" when the device is gone, and
if cinder has reported a deviceName that another volume has used in
relaity, then this will block forever (or until the other, unreleated,
volume has been detached)
Automatic merge from submit-queue
Remove GetRootContext method from VolumeHost interface
Remove the `GetRootContext` call from the `VolumeHost` interface, since Kubernetes no longer needs to know the SELinux context of the Kubelet directory.
Per #33951 and #35127.
Depends on #33663; only the last commit is relevant to this PR.
See issue #33128
We can't rely on the device name provided by Cinder, and thus must perform
detection based on the drive serial number (aka It's cinder ID) on the
kubelet itself.
This patch re-works the cinder volume attacher to ignore the supplied
deviceName, and instead defer to the pre-existing GetDevicePath method to
discover the device path based on it's serial number and /dev/disk/by-id
mapping.
This new behavior is controller by a config option, as falling back
to the cinder value when we can't discover a device would risk devices
not showing up, falling back to cinder's guess, and detecting the wrong
disk as attached.
This has been unused since 542f2dc7, and relies on deviceName, which
can no longer be relied upon (see issue #33128).
This needs to be removed now, as part of #33128, as the code can't be
updated to attempt device detection and fallback through to the Cinder
provided deviceName, as detection "fails" when the device is gone, and
if cinder has reported a deviceName that another volume has used in
relaity, then this will block forever (or until the other, unreleated,
volume has been detached)
At master volume reconciler, the information about which volumes are
attached to nodes is cached in actual state of world. However, this
information might be out of date in case that node is terminated (volume
is detached automatically). In this situation, reconciler assume volume
is still attached and will not issue attach operation when node comes
back. Pods created on those nodes will fail to mount.
This PR adds the logic to periodically sync up the truth for attached volumes kept in the actual state cache. If the volume is no longer attached to the node, the actual state will be updated to reflect the truth. In turn, reconciler will take actions if needed.
To avoid issuing many concurrent operations on cloud provider, this PR
tries to add batch operation to check whether a list of volumes are
attached to the node instead of one request per volume.
More details are explained in PR #33760
Gluster provisioner is interested in pvc.Namespace and I don't want to add
at as a new field in VolumeOptions - it would contain almost whole PVC.
Let's pass direct reference to PVC instead and let the provisioner to pick
information it is interested in.
We had another bug where we confused the hostname with the NodeName.
To avoid this happening again, and to make the code more
self-documenting, we use types.NodeName (a typedef alias for string)
whenever we are referring to the Node.Name.
A tedious but mechanical commit therefore, to change all uses of the
node name to use types.NodeName
Also clean up some of the (many) places where the NodeName is referred
to as a hostname (not true on AWS), or an instanceID (not true on GCE),
etc.
Currently kubelet volume management works on the concept of desired
and actual world of states. The volume manager periodically compares the
two worlds and perform volume mount/unmount and/or attach/detach
operations. When kubelet restarts, the cache of those two worlds are
gone. Although desired world can be recovered through apiserver, actual
world can not be recovered which may cause some volumes cannot be cleaned
up if their information is deleted by apiserver. This change adds the
reconstruction of the actual world by reading the pod directories from
disk. The reconstructed volume information is added to both desired
world and actual world if it cannot be found in either world. The rest
logic would be as same as before, desired world populator may clean up
the volume entry if it is no longer in apiserver, and then volume
manager should invoke unmount to clean it up.
Modify attach/detach controller to keep track of volumes to report
attached in Node VolumeToAttach status.
Modify kubelet volume manager to wait for volume to show up in Node
VolumeToAttach status.
Implement exponential backoff for errors in volume manager and attach
detach controller
This commit adds a new volume manager in kubelet that synchronizes
volume mount/unmount (and attach/detach, if attach/detach controller
is not enabled).
This eliminates the race conditions between the pod creation loop
and the orphaned volumes loops. It also removes the unmount/detach
from the `syncPod()` path so volume clean up never blocks the
`syncPod` loop.
Kubernetes Submit Queue