Automatic merge from submit-queue (batch tested with PRs 49058, 49072, 49137, 49182, 49045)
check for nil value in interface for proxier health
golang allows for a non-nil interface to have a nil value (not type). This results in an NPE at runtime.
@sttts remember that bit about go? Trivia becomes real :(
Automatic merge from submit-queue (batch tested with PRs 48043, 48200, 49139, 36238, 49130)
expose method to allow externally setting defaults on an external type
The options are an exposed type. This allows you to set the defaults on them.
@derekwaynecarr who normally owns this bit?
Automatic merge from submit-queue (batch tested with PRs 47309, 47187)
Add IPv6 test cases to kube-proxy server test.
**What this PR does / why we need it**: This change adds some IPv6 test cases for the kube-proxy server. Also adds some test cases for negative conditions for better test coverage.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#47313
**Special notes for your reviewer**:
**Release note**:
```release-note
```
Automatic merge from submit-queue
fix#46039: iptables proxier need use '--bind-address' if set
**What this PR does / why we need it**:
iptables proxier need use '--bind-address' if set
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#46039
**Special notes for your reviewer**:
**Release note**:
```release-note
```
change import of client-go/api/helper to kubernetes/api/helper
remove unnecessary use of client-go/api.registry
change use of client-go/pkg/util to kubernetes/pkg/util
remove dependency on client-go/pkg/apis/extensions
remove unnecessary invocation of k8s.io/client-go/extension/intsall
change use of k8s.io/client-go/pkg/apis/authentication to v1
Automatic merge from submit-queue (batch tested with PRs 44727, 45409, 44968, 45122, 45493)
Separate healthz server from metrics server in kube-proxy
From #14661, proposal is on kubernetes/community#552.
Couple bullet points as in commit:
- /healthz will be served on 0.0.0.0:10256 by default.
- /metrics and /proxyMode will be served on port 10249 as before.
- Healthz handler will verify timestamp in iptables mode.
/assign @nicksardo @bowei @thockin
**Release note**:
```release-note
NONE
```
- /healthz will be served on 0.0.0.0:10256 by default.
- /metrics and /proxyMode will be served on port 10249
as before.
- Healthz handler will verify timestamp in iptables mode.
Automatic merge from submit-queue
[WIP] Skip resize of nf_conntrack/parameters/hashsize if not necessary
**What this PR does / why we need it**:
Linux does not support writing to `/sys/module/nf_conntrack/parameters/hashsize` when the writer process is not in the initial network namespace
(https://github.com/torvalds/linux/blob/v4.10/net/netfilter/nf_conntrack_core.c#L1795-L1796).
Usually that's fine. But in some configurations such as with https://github.com/kinvolk/kubeadm-nspawn, kube-proxy is in another netns.
Therefore, check if writing in hashsize is necessary and skip the writing if not.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
```
Automatic merge from submit-queue
Optimize getProxyMode() to get proxy mode
1. getProxyMode() does not need nodeGetter args after remove
proxy-mode annotation.
2. we should get error when the version of iptables less than
MinVersion.
Automatic merge from submit-queue
Edge-based userspace LB in kube-proxy
@thockin @bowei - if one of you could take a look if that PR doesn't break some basic kube-proxy assumptions. The similar change for winuserproxy should be pretty trivial.
And we should also do that for iptables, but that requires splitting the iptables code to syncProxyRules (which from what I know @thockin already started working on so we should probably wait for it to be done).
Use shared informers instead of creating local controllers/reflectors
for the proxy's endpoints and service configs. This allows downstream
integrators to pass in preexisting shared informers to save on memory &
cpu usage.
This also enables the cache mutation detector for kube-proxy for those
presubmit jobs that already turn it on.
Automatic merge from submit-queue
Extensible Userspace Proxy
This PR refactors the userspace proxy to allow for custom proxy socket implementations.
It changes the the ProxySocket interface to ensure that other packages can properly implement it (making sure all arguments are publicly exposed types, etc), and adds in a mechanism for an implementation to create an instance of the userspace proxy with a non-standard ProxySocket.
Custom ProxySockets are useful to inject additional logic into the actual proxying. For example, our idling proxier uses a custom proxy socket to hold connections and notify the cluster that idled scalable resources need to be woken up.
Also-Authored-By: Ben Bennett bbennett@redhat.com
Automatic merge from submit-queue (batch tested with PRs 42200, 39535, 41708, 41487, 41335)
Update kube-proxy support for Windows
**What this PR does / why we need it**:
The kube-proxy is built upon the sophisticated iptables NAT rules. Windows does not have an equivalent capability. This introduces a change to the architecture of the user space mode of the Windows version of kube-proxy to match the capabilities of Windows.
The proxy is organized around service ports and portals. For each service a service port is created and then a portal, or iptables NAT rule, is opened for each service ip, external ip, node port, and ingress ip. This PR merges the service port and portal into a single concept of a "ServicePortPortal" where there is one connection opened for each of service IP, external ip, node port, and ingress IP.
This PR only affects the Windows kube-proxy. It is important for the Windows kube-proxy because it removes the limited portproxy rule and RRAS service and enables full tcp/udp capability to services.
**Special notes for your reviewer**:
**Release note**:
```
Add tcp/udp userspace proxy support for Windows.
```
This changes the userspace proxy so that it cleans up its conntrack
settings when a service is removed (as the iptables proxy already
does). This could theoretically cause problems when a UDP service
as deleted and recreated quickly (with the same IP address). As
long as packets from the same UDP source IP and port were going to
the same destination IP and port, the the conntrack would apply and
the packets would be sent to the old destination.
This is astronomically unlikely if you did not specify the IP address
to use in the service, and even then, only happens with an "established"
UDP connection. However, in cases where a service could be "switched"
between using the iptables proxy and the userspace proxy, this case
becomes much more frequent.
Automatic merge from submit-queue
make client-go more authoritative
Builds on https://github.com/kubernetes/kubernetes/pull/40103
This moves a few more support package to client-go for origination.
1. restclient/watch - nodep
1. util/flowcontrol - used interface
1. util/integer, util/clock - used in controllers and in support of util/flowcontrol
Automatic merge from submit-queue (batch tested with PRs 39695, 37054, 39627, 39546, 39615)
remove repeating const declaration
**What this PR does / why we need it**:
remove repeating const declaration , and avoid const declaration in loop
Thanks.
**Special notes for your reviewer**:
**Release note**:
```release-note
```
Automatic merge from submit-queue
Add Windows support to kube-proxy
<!-- Thanks for sending a pull request! Here are some tips for you:
1. If this is your first time, read our contributor guidelines https://github.com/kubernetes/kubernetes/blob/master/CONTRIBUTING.md and developer guide https://github.com/kubernetes/kubernetes/blob/master/docs/devel/development.md
2. If you want *faster* PR reviews, read how: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/faster_reviews.md
3. Follow the instructions for writing a release note: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/pull-requests.md#release-notes
-->
**What this PR does / why we need it**:
This is the first stab at supporting kube-proxy (userspace mode) on Windows
**Which issue this PR fixes** :
fixes#30278
**Special notes for your reviewer**:
The MVP uses `netsh portproxy` to redirect traffic from `ServiceIP:ServicePort` to a `LocalIP:LocalPort`.
For the next version we are expecting to have guidance from Microsoft Container Networking team.
**Limitations**:
Current implementation does not support DNS queries over UDP as `netsh portproxy` currently only supports TCP. We are working with Microsoft to remediate this.
cc: @brendandburns @dcbw
**Release note**:
<!-- Steps to write your release note:
1. Use the release-note-* labels to set the release note state (if you have access)
2. Enter your extended release note in the below block; leaving it blank means using the PR title as the release note. If no release note is required, just write `NONE`.
-->
```release-note
```
Automatic merge from submit-queue
[Kubelet] Use the custom mounter script for Nfs and Glusterfs only
This patch reduces the scope for the containerized mounter to NFS and GlusterFS on GCE + GCI clusters
This patch also enabled the containerized mounter on GCI nodes
Shepherding multiple PRs through the submit queue is painful. Hence I combined them into this PR. Please review each commit individually.
cc @jingxu97 @saad-ali
https://github.com/kubernetes/kubernetes/pull/35652 has also been reverted as part of this PR
In order to be able to use new mounter library, this PR adds the
mounterPath flag to kubelet which passes the flag to the mount
interface. If flag is empty, mount uses default mount path.
Automatic merge from submit-queue
Remove implicit Prometheus metrics from client
**What this PR does / why we need it**: This PR starts to cut away at dependencies that the client has.
**Release note**:
<!-- Steps to write your release note:
1. Use the release-note-* labels to set the release note state (if you have access)
2. Enter your extended release note in the below block; leaving it blank means using the PR title as the release note. If no release note is required, just write `NONE`.
-->
```release-note
The implicit registration of Prometheus metrics for request count and latency have been removed, and a plug-able interface was added. If you were using our client libraries in your own binaries and want these metrics, add the following to your imports in the main package: "k8s.io/pkg/client/metrics/prometheus".
```
cc: @kubernetes/sig-api-machinery @kubernetes/sig-instrumentation @fgrzadkowski @wojtek-t
Automatic merge from submit-queue
kube-proxy: Propagate hostname to iptables proxier
Need to propagate the hostname (i.e. Nodename) from kube-proxy to the iptables proxier to allow kube-proxy to determine local endpoints.
<!-- Reviewable:start -->
---
This change is [<img src="https://reviewable.kubernetes.io/review_button.svg" height="34" align="absmiddle" alt="Reviewable"/>](https://reviewable.kubernetes.io/reviews/kubernetes/kubernetes/30293)
<!-- Reviewable:end -->
Add flags to control max connections (set to 256k vs 64k default) and TCP
established timeout (set to 1 day vs 5 day default). Flags can be set to 0 to
mean "don't change it".
This is only set at startup, and not wrapped in a rectifier loop.
Tested manually.
Default to hardcodes for components that had them, and 5.0 qps, 10 burst
for those that relied on client defaults
Unclear if maybe it'd be better to just assume these are set as part of
the incoming kubeconfig. For now just exposing them as flags since it's
easier for me to manually tweak.
This changes the --legacy-userspace-proxy flag to be a string flag
--proxy-mode. If specified, the flag will be respected ('userspace' and
'iptables' being valid values). If left blank (default) we will choose the
"best". best means userspace for now UNLESS the user adds an annotation
(net.experimental.kubernetes.io/proxy-mode) to their node, in which case we
will try to use that.
This allows people to try it on a single machine without fear of global failure
and without it getting rolled back on reboots. It is a poor-man's config blob.
Zihong Zheng
