Automatic merge from submit-queue (batch tested with PRs 49904, 50484, 50214)
Adding support for internal IP for e2e tests
Currently IssueSSHComand in util.go only checks for External IP address
to ssh, this PR adds check for internal IP too.
Closes#50630
**What this PR does / why we need it:** This PR adds [sig-auth] prefix to
workload e2e tests in accord to requirements of adding a SIG dashboard
to testgrid. Refer PR #48781 for guidelines.
Automatic merge from submit-queue (batch tested with PRs 50485, 49951, 50508, 50511, 50506)
fix a typo
**What this PR does / why we need it**:
fix a small typo
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
verions->versions
**Special notes for your reviewer**:
**Release note**:
NONE
```release-note
```NONE
Automatic merge from submit-queue (batch tested with PRs 50537, 49699, 50160, 49025, 50205)
When not using a CloudProvider, set both InternalIP and ExternalIP on Nodes
#36095 changed all of the cloudproviders to set both InternalIP and ExternalIP on Nodes, but the non-cloudprovider fallback code now only sets InternalIP.
This causes the test "should be able to create a functioning NodePort service" in test/e2e/service.go to fail on cloud-provider-less clusters, because (with LegacyHostIP gone), it now will only try to work with ExternalIPs, and will fail if the node has only an InternalIP.
There isn't much other code that assumes that ExternalIP will always be set (there's something in pkg/master/master.go, but I don't know what it's doing, so maybe it's only useful in the case where InternalIP != ExternalIP anyway). But given that several of the cloudproviders (mesos, ovirt, rackspace) now explicitly set both InternalIP and ExternalIP to the same value always, it seemed right to do that in the fallback case too.
@deads2k FYI
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue
move logs to kubectl/util
Move `pkg/util/logs` to `pkg/kubectl/util/logs` per https://github.com/kubernetes/kubernetes/issues/48209#issuecomment-311730681
This will make kubeadm, kubefed, gke-certificates-controller and e2e have dependency on kubectl, which should be fine.
partially addresses: kubernetes/community#598
```release-note
NONE
```
/assign @apelisse @monopole
Automatic merge from submit-queue
Remove deprecated ESIPP beta annotations
**What this PR does / why we need it**:
Remove deprecated ESIPP beta annotations.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#50187
**Special notes for your reviewer**:
/assign @MrHohn
/sig network
**Release note**:
```release-note
Beta annotations `service.beta.kubernetes.io/external-traffic` and `service.beta.kubernetes.io/healthcheck-nodeport` have been removed. Please use fields `service.spec.externalTrafficPolicy` and `service.spec.healthCheckNodePort` instead.
```
Automatic merge from submit-queue
Migrate to controller references helpers in meta/v1
**What this PR does / why we need it**:
This is a follow up for #48319 that migrates all method usages to new methods in meta/v1.
**Special notes for your reviewer**:
Looking at each commit individually might be easier.
**Release note**:
```release-note
NONE
```
/sig api-machinery
/kind cleanup
Automatic merge from submit-queue
Add Cluster Autoscaler scalability test suite
This suite is intended for manually testing Cluster Autoscaler on large clusters. It isn't supposed to be run automatically (at least for now).
It can be run on Kubemark (with #50440) with the following setup:
- start Kubemark with NUM_NODES=1 (as we require there to be exactly 1 replica per hollow-node replication controller in this setup)
- set kubemark-master machine type manually to appropriate type for the Kubemark cluster size. Maximum Kubemark cluster size reached in test run is defined by maxNodes constant, so for maxNodes=1000, please upgrade to n1-standard-32. Adjust if modifying maxNodes.
- start Cluster Autoscaler pod in the external cluster using image built from version with Kubemark cloud provider (release pending)
- for grabbing metrics from ClusterAutoscaler (with #50382), add "--include-cluster-autoscaler=true" parameter in addition to regular flags for gathering components' metrics/resource usage during e2e tests
cc @bskiba
Automatic merge from submit-queue (batch tested with PRs 45186, 50440)
Add functionality needed by Cluster Autoscaler to Kubemark Provider.
Make adding nodes asynchronous. Add method for getting target
size of node group. Add method for getting node group for node.
Factor out some common code.
**Release note**:
```
NONE
```
Make adding nodes asynchronous. Add method for getting target
size of node group. Add method for getting node group for node.
Factor out some common code.
Automatic merge from submit-queue (batch tested with PRs 49642, 50335, 50390, 49283, 46582)
Improve GC discovery sync performance
Improve GC discovery sync performance by only syncing when discovered
resource diffs are detected. Before, the GC worker pool was shut down
and monitors resynced unconditionally every sync period, leading to
significant processing delays causing test flakes where otherwise
reasonable GC timeouts were being exceeded.
Related to https://github.com/kubernetes/kubernetes/issues/49966.
/cc @kubernetes/sig-api-machinery-bugs
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 49642, 50335, 50390, 49283, 46582)
Add rbac.authorization.k8s.io/v1
xref https://github.com/kubernetes/features/issues/2
Promotes the rbac.authorization.k8s.io/v1beta1 API to v1 with no changes
```release-note
The `rbac.authorization.k8s.io/v1beta1` API has been promoted to `rbac.authorization.k8s.io/v1` with no changes.
The `rbac.authorization.k8s.io/v1alpha1` version is deprecated and will be removed in a future release.
```
Automatic merge from submit-queue (batch tested with PRs 50418, 49830, 49206, 49061, 49912)
add LocalZone into gce.conf and refactor gce cloud provider configura…
The main goal of this PR is to make gce cloud provider able to run locally.
1. added a LocalZone parameter into gce.conf.
2. refactor `newGCECloud` to avoid contacting metadata server if configuration is already available.
```release-note
None
```
Automatic merge from submit-queue
VSphere cloud provider code refactoring
The current PR tracks the vSphere Cloud Provider code refactoring which includes the following changes.
- VCLib Package - A framework used by vSphere cloud provider for managing the vSphere entities. VCLib package mainly does the following:
- Volume management on datastore (Create/Delete)
- Volume management on Virtual Machines (Attach/Detach)
- Storage Policy Management
- vSphere Cloud Provider changes to implement the cloud provider interfaces by calling into VCLib package.
- Modifications to e2e tests to accomodate the latest design changes.
@divyenpatel @rohitjogvmw @luomiao
```release-note
vSphere cloud provider: vSphere cloud provider code refactoring
```
Automatic merge from submit-queue (batch tested with PRs 50016, 49583, 49930, 46254, 50337)
Remove scheduledjobs
This is a prerequisite for promoting CronJobs to beta.
**Release note**:
```release-note
Remove deprecated ScheduledJobs endpoints, use CronJobs instead.
```
Pods associated with the test JobTemplate should use a zero
TerminationGracePeriodSeconds to ensure they're deleted immediately.
This should improve test timing assumption consistency.
Automatic merge from submit-queue
Support exec/attach/portforward in `kubectl proxy`
Use the UpgradeAwareProxy shared code in kubectl proxy. Provide a separate transport for those requests that does not have HTTP/2 enabled. Refactor the code to be a bit cleaner in places and to better separate changes.
Fixes#32026
```release-note
`kubectl proxy` will now correctly handle the `exec`, `attach`, and `portforward` commands. You must pass `--disable-filter` to the command in order to allow these endpoints.
```
Automatic merge from submit-queue (batch tested with PRs 50173, 50324, 50288, 50263, 50333)
Add blank import for node tests
The node tests weren't being run because the weren't imported in the test/e2e/e2e_test.go file.
Thanks to @abgworrall for sounding the alarm (he noticed [sig-node] wasn't in the test results)!
/assign @yujuhong
/cc @abgworrall
Automatic merge from submit-queue
Fix local storage test failures
**What this PR does / why we need it**:
Fixed a few issues:
- CI environment on GCE cannot resolve node names, need to use IPs. Use a different SSH wrapper that will get the IPs from the node object.
- Use hostdir instead of containerdir now that commands are executed directly on the host, instead of through a container.
- Get the PVC object again after it is bound so that it has the PV name.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#50128
**Release note**:
NONE
/release-note-none
/sig storage
Automatic merge from submit-queue
Add waitForFailure for e2e test framework
**What this PR does / why we need it**:
Add waitForFailure for e2e test framework, this could reduce the reliance on logs.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*:
Part of #44118. Refer https://github.com/kubernetes/kubernetes/pull/48858#discussion_r128331726
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue
Add a simple cloud provider for e2e tests on kubemark
**What this PR does / why we need it**:
Adds a simplified cloud provider for kubemark. This enables us to add and
remove nodes and operate on nodegroups while running tests on kubemark.
This is needed to run scalability tests for cluster autoscaler on kubemark.
See https://github.com/kubernetes/autoscaler/blob/master/cluster-autoscaler/proposals/kubemark_integration.md
**Release note**:
```
NONE
```
Automatic merge from submit-queue
Add e2e test for cronjob chained removal
This is test proving https://github.com/kubernetes/kubernetes/pull/44058 works with cronjobs. This will fail until the aforementioned PR merges.
@caesarxuchao ptal
Automatic merge from submit-queue (batch tested with PRs 50208, 50259, 49702, 50267, 48986)
Move ownership of proxy test to sig-network directory
```release-note
None
```
Automatic merge from submit-queue
StatefulSet scale subresource
**What this PR does / why we need it**: This PR implements scale subresource for StatefulSet.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#46005
**Special notes for your reviewer**:
**Release note**:
```release-note
StatefulSet uses scale subresource when scaling in accord with ReplicationController, ReplicaSet, and Deployment implementations.
```
**Feature Checklist**:
- [x] Introduce Registry interface for storage purpose
- [x] Introduce `ScaleREST New(), Get() and Update()` utility functions
- [x] Create a `ScaleREST` object at `NewREST()` and return it
- [x] Enable scale subresource by adding `/scale` field to the storage map
**Testing Checklist**:
- Unit testing
- [x] Modify `newStorage()` to call `NewStorage()`, and change all unit tests accordingly
- [x] Add unit tests for `ScaleREST Get() and Update()` utility functions
- [x] Add missing unit test for `ShortNames`
- Manual testing
- [x] Verify existence of the subresource using `kubectl proxy` command
- [x] Modify the subresource using `curl` via `POST`
- e2e testing
- [x] Add e2e tests using `RESTClient`
Automatic merge from submit-queue (batch tested with PRs 49524, 46760, 50206, 50166, 49603)
Handled taints on node in batch.
**What this PR does / why we need it**:
Enhanced helpers to handled taints on node in batch.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#49522
**Release note**:
```release-note
None
```
Automatic merge from submit-queue (batch tested with PRs 49885, 49751, 49441, 49952, 49945)
Rename e2e sig framework files
**What this PR does / why we need it**:
make files be consistent across all sig e2e tests dir.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
Umbrella issue #49161
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
This is needed for cluster autoscaler e2e test to
run on kubemark. We need the ability to add and
remove nodes and operate on nodegroups. Kubemark
does not provide this at the moment.
Automatic merge from submit-queue (batch tested with PRs 50091, 50231, 50238, 50236, 50243)
Fix storage tests for multizone test configuration.
**What this PR does / why we need it**:
This PR modifies "[sig-storage] Volumes PD should be mountable with (ext3|ext4)" tests to schedule pods in zone, where PD is created.
This is to make the test work in multizone environment.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
```
Automatic merge from submit-queue (batch tested with PRs 50091, 50231, 50238, 50236, 50243)
Move the sig-instrumentation test to a dedicated folder
Move the last remaining test to sig-instrumentation folder, also move "metrics" package to the "framework" folder
Related issue: https://github.com/kubernetes/kubernetes/issues/49161
/cc @xiangpengzhao @piosz
Automatic merge from submit-queue (batch tested with PRs 50091, 50231, 50238, 50236, 50243)
Modify e2e.go to arbitrarily pick one of zones we have nodes in for multizone tests.
**What this PR does / why we need it**:
When e2e runs in multizone configuration, zone config property can be empty.
This PR, in that case, overrides an empty value with arbitrarily chosen zone that we have nodes in.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
```
Automatic merge from submit-queue (batch tested with PRs 49855, 49915)
Let controllers ignore initialization timeout when creating pods
Partially address https://github.com/kubernetes/kubernetes/issues/48893#issuecomment-318540129.
This only updates the controllers that create pods with `GenerateName`.
The controllers ignore the timeout error when creating the pods, depending on how the initialization progress:
* If the initialization is successful in less than 5 mins, the controller will observe the creation via the informer. All is good.
* If the initialization fails, server will delete the pod, but the controller won't receive any event. The controller will not create new pod until the Creation expectation expires in 5 min.
* If the initialization takes too long (> 5 mins), the Creation expectation expires and the controller will create extra pods.
I'll send follow-up PRs to fix the latter two cases, e.g., by refactoring the sharedInformer.
Automatic merge from submit-queue (batch tested with PRs 48532, 50054, 50082)
Remove [k8s.io] tag and redundant [sig-storage] tags from volume tests
**What this PR does / why we need it**:
Removes redundant tags from storage e2e test names
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#50178
**Release note**:
/release-note-none
Automatic merge from submit-queue (batch tested with PRs 48532, 50054, 50082)
Correcting two spelling mistakes
**What this PR does / why we need it**:
Correcting two spelling mistakes.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
NONE
**Special notes for your reviewer**:
NONE
**Release note**:
NONE
```release-note
```
Automatic merge from submit-queue
Update OWNERS to correct members' handles
**What this PR does / why we need it**:
Fix some typos of members' handles as per https://github.com/kubernetes/kubernetes/issues/50048#issuecomment-319831957.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
Associated with: #50048
**Special notes for your reviewer**:
/cc @madhusudancs @sebgoa @liggitt @saad-ali
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 50119, 48366, 47181, 41611, 49547)
Add basic install and mount flexvolumes e2e tests
fixes https://github.com/kubernetes/kubernetes/issues/47010
These two tests install a skeleton "dummy" flex driver, attachable and non-attachable respectively, then test that a pod can successfully use the flex driver. They are labeled disruptive because kubelet and controller-manager get restarted as part of the flex install. IMO it's important to keep this install procedure as part of the test to isolate any bugs with the startup plugin probe code.
There is a bit of an ugly dependency on cluster/gce/config-test.sh because --flex-volume-plugin-dir must be set to a dir that's readable from controller-manager container and writable by the flex e2e test. The default path is not writable on GCE masters with read-only root so I picked a location that looks okay.
In the "dummy" drivers I trick kubelet into thinking there is a mount point by doing "mount -t tmpfs none ${MNTPATH} >/dev/null 2>&1", hope that is okay.
I have only tested on GCE and theoretically they may work on AWS but I don't think there is a need to test on multiple cloudproviders.
-->
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 50119, 48366, 47181, 41611, 49547)
increase the GC e2e test timeout
Fix https://github.com/kubernetes/kubernetes/issues/50047.
The root cause is #50046. See log analysis in #50047. For now, we just increase the timeout.
Automatic merge from submit-queue
Fix pointer bug in local volume e2e test
**What this PR does / why we need it**:
Fix pointer bug in local volume e2e test
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes https://github.com/kubernetes/kubernetes/issues/50043
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 48237, 50084, 50019, 50069, 50090)
Allow for some pods not to get scheduled in CA tests.
This will allow us to ignore long tail node creation or failure
to create some nodes when running scalability tests on kubemark.
**Release note**:
```
NONE
```
Automatic merge from submit-queue
Moves left networking e2e tests to test/e2e/network
**What this PR does / why we need it**:
#48784 forgot to move some networking e2e tests. This PR moves them.
It also move the networking tests from within `test/e2e/common/networking.go` to `test/e2e/network/networking.go`
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
Associated PR #48784
Umbrella issue #49161
**Special notes for your reviewer**:
/assign @wojtek-t @bowei
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 50000, 49954, 49943, 50018, 49607)
Add [sig-autoscaling] prefix to autoscaling e2e tests
**What this PR does / why we need it**:
Add [sig-autoscaling] prefix to autoscaling e2e tests
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
Umbrella issue #49161
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 50000, 49954, 49943, 50018, 49607)
Update the DeleteReplicaSet in rs_util.go to use server side reaper
**What this PR does / why we need it**:
fix#47832
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#47832
**Special notes for your reviewer**:
**Release note**:
```
None
```
Automatic merge from submit-queue (batch tested with PRs 50000, 49954, 49943, 50018, 49607)
Add [sig-scalability] prefix to scalability e2e tests
**What this PR does / why we need it**:
Add [sig-scalability] prefix to scalability e2e tests
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
Umbrella issue #49161
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue
Add ubuntu to gluster and nfs tests
**What this PR does / why we need it**:
Enable gluster and nfs tests for ubuntu distro
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#50039
**Special notes for your reviewer**:
**Release note**:
/release-note-none
/sig storage
Automatic merge from submit-queue (batch tested with PRs 49990, 49997, 44278, 49936, 49891)
Allow mode in e2e-framework to gather metrics only from master
This should enable getting metrics for our 5k-node clusters.
cc @kubernetes/sig-scalability-misc @gmarek
Automatic merge from submit-queue (batch tested with PRs 49871, 49422, 49092, 49858, 48999)
Refactor logging e2e tests, add new checks
I split existing code into smaller files to simplify the review and future changes
Also, there are new tests for stackdriver logging:
- ingesting system logs from all nodes
- ingesting logs in json format
- ingesting logs in glog format
Automatic merge from submit-queue (batch tested with PRs 49898, 49897, 49919, 48860, 49491)
Fix usage a make(struct, len()) followed by append()
A couple of places in the code we allocate with make() but then use
append(), instead of copy() or direct assignment. This results in a
slice with len() zero elements at the front followed by the expected
data. The correct form for such usage is `make(struct, 0, len())`.
I found these by running:
```
$ git grep -EI -A7 'make\([^,]*, len\(' | grep 'append(' -B7 | grep -v vendor
```
And then manually looking through the results. I'm sure something better
could exist.
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 49898, 49897, 49919, 48860, 49491)
Add basic local volume provisioner e2e tests
**What this PR does / why we need it**:
Adds e2e tests to test local volume provisioner.
**Which issue this PR fixes**: fixes https://github.com/kubernetes/kubernetes/issues/48832
**Special notes for your reviewer**:
- bring up local volume provisioner using bootstrapper
- have provisioner create a volume by creating a directory under discovery path.
- check persistent volume is created
- make a claim on the PV, write some data then delete the claim. Verify volume is cleaned up.
**Release note**:
```release-note
```
@ianchakeres @msau42
Automatic merge from submit-queue (batch tested with PRs 49651, 49707, 49662, 47019, 49747)
improve detectability of deleted pods
**What this PR does / why we need it**:
Adds comment to `waitForPodTerminatedInNamespace` to better explain how it's implemented.
~~It improves pod deletion detection in the e2e framework as follows:~~
~~1. the `waitForPodTerminatedInNamespace` func looks for pod.Status.Phase == _PodFailed_ or _PodSucceeded_ since both values imply that all containers have terminated.~~
~~2. the `waitForPodTerminatedInNamespace` func also ignores the pod's Reason if the passed-in `reason` parm is "". Reason is not really relevant to the pod being deleted or not, but if the caller passes a non-blank `reason` then it will be lower-cased, de-blanked and compared to the pod's Reason (also lower-cased and de-blanked). The idea is to make Reason checking more flexible and to prevent a pod from being considered running when all of its containers have terminated just because of a Reason mis-match.~~
Releated to pr [49597](https://github.com/kubernetes/kubernetes/pull/49597) and issue [49529](https://github.com/kubernetes/kubernetes/issues/49529).
**Release note**:
```release-note
NONE
```
A couple of places in the code we allocate with make() but then use
append(), instead of copy() or direct assignment. This results in a
slice with len() zero elements at the front followed by the expected
data. The correct form for such usage is `make(struct, 0, len())`.
I found these by running:
```
$ git grep -EI -A7 'make\([^,]*, len\(' | grep 'append(' -B7 | grep -v vendor
```
And then manually looking through the results. I'm sure something better
could exist.
Automatic merge from submit-queue (batch tested with PRs 49538, 49708, 47665, 49750, 49528)
Add ext4 and xfs tests to GCE PD basic mount tests
**What this PR does / why we need it**:
Add ext4 and xfs to basic GCE PD mount tests.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#49511
**Special notes for your reviewer**:
**Release note**:
/release-note-none
/sig storage
Automatic merge from submit-queue (batch tested with PRs 49538, 49708, 47665, 49750, 49528)
Enable garbage collection of custom resources
Enhance the garbage collector to periodically refresh the resources it monitors (via discovery) to enable custom resource definition GC (addressing #44507 and reverting #47432).
This is a replacement for #46000.
/cc @lavalamp @deads2k @sttts @caesarxuchao
/ref https://github.com/kubernetes/kubernetes/pull/48065
```release-note
The garbage collector now supports custom APIs added via CustomeResourceDefinition or aggregated apiservers. Note that the garbage collector controller refreshes periodically, so there is a latency between when the API is added and when the garbage collector starts to manage it.
```
Automatic merge from submit-queue (batch tested with PRs 49538, 49708, 47665, 49750, 49528)
Add a support for GKE regional clusters in e2e tests.
**What this PR does / why we need it**:
Add a support for GKE regional clusters in e2e tests.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 49538, 49708, 47665, 49750, 49528)
Use the core client with version
**What this PR does / why we need it**:
Replace the **deprecated** `clientSet.Core()` with `clientSet.CoreV1()`.
**Which issue this PR fixes**: fixes#49535
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 49581, 49652, 49681, 49688, 44655)
Move the audit e2e test out of the node SIG
It was mistakenly moved to sig-node in https://github.com/kubernetes/kubernetes/pull/48910, but this is an apiserver feature, not a node feature.
/cc @crassirostris
Automatic merge from submit-queue (batch tested with PRs 49712, 49694, 49714, 49670, 49717)
Reduce GC e2e test flakiness
Increase GC wait timeout in a flaky e2e test. The test expects a GC
operation to be performed within 30s, while in practice the operation
often takes longer due to a delay between the enqueueing of the owner's
delete operation and the GC's actual processing of that event. Doubling
the time seems to stabilize the test. The test's assumptions can be
revisited, and the processing delay under load can be investigated in
the future.
Extracted from https://github.com/kubernetes/kubernetes/pull/47665 per https://github.com/kubernetes/kubernetes/pull/47665#issuecomment-318219099.
/cc @sttts @caesarxuchao @deads2k @kubernetes/sig-api-machinery-bugs
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 45813, 49594, 49443, 49167, 47539)
Add node e2e tests for GKE environment
Ref: https://github.com/kubernetes/kubernetes/issues/46891
This PR adds node e2e tests for validating images used on GKE.
- We pass the `SYSTEM_SPEC_NAME` to the node e2e test process via the flag `--system-spec-name` so that we can skip the environment specific tests using `RunIfSystemSpecNameIs()`.
- Also added `SkipIfContainerRuntimeIs()` as the opposite of `RunIfContainerRuntimeIs()`.
**Release note**:
```
None
```
Enhance the garbage collector to periodically refresh the resources it
monitors (via discovery) to enable custom resource definition GC.
This implementation caches Unstructured structs for any kinds not
covered by a shared informer. The existing meta-only codec only supports
compiled types; an improved codec which supports arbitrary types could
be introduced to optimize caching to store only metadata for all
non-informer types.
Automatic merge from submit-queue (batch tested with PRs 49619, 49598, 47267, 49597, 49638)
improve log for pod deletion poll loop
**What this PR does / why we need it**:
It improves some logging related to waiting for a pod to reach a passed-in condition. Specifically, related to issue [49529](https://github.com/kubernetes/kubernetes/issues/49529) where better logging may help to debug the root cause.
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 49665, 49689, 49495, 49146, 48934)
Add Integration tests for Inter-Pod Affinity(AntiAffinity)
Signed-off-by: vikaschoudhary16 <choudharyvikas16@gmail.com>
**What this PR does / why we need it**:
Adds integration tests for inter-pod affinity(anti-affinity)
**Special notes for your reviewer**:
Once after @bsalamat 's #48847 gets merged, changes in this PR will be restructured according to the merged changes.
ref/ #48176#48847
@kubernetes/sig-scheduling-pr-reviews
@davidopp @k82cn
Increase GC wait timeout in a flaky e2e test. The test expects a GC
operation to be performed within 30s, while in practice the operation
often takes longer due to a delay between the enqueueing of the owner's
delete operation and the GC's actual processing of that event. Doubling
the time seems to stabilize the test. The test's assumptions can be
revisited, and the processing delay under load can be investigated in
the future.
Automatic merge from submit-queue (batch tested with PRs 48976, 49474, 40050, 49426, 49430)
Remove duplicated import and wrong alias name of api package
**What this PR does / why we need it**:
**Which issue this PR fixes**: fixes#48975
**Special notes for your reviewer**:
/assign @caesarxuchao
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 48846, 49483, 49341)
Add [sig-network] prefix to network e2e tests
**What this PR does / why we need it**:
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
Associated PR #48784
Umbrella issue #49161
**Special notes for your reviewer**:
/assign @@wojtek-t @freehan
/cc @bowei
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue
Remove flags low-diskspace-threshold-mb and outofdisk-transition-frequency
issue: #48843
This removes two flags replaced by the eviction manager. These have been depreciated for two releases, which I believe correctly follows the kubernetes depreciation guidelines.
```release-note
Remove depreciated flags: --low-diskspace-threshold-mb and --outofdisk-transition-frequency, which are replaced by --eviction-hard
```
cc @mtaufen since I am changing kubelet flags
cc @vishh @derekwaynecarr
/sig node
Automatic merge from submit-queue (batch tested with PRs 49358, 49253)
Remove hostname label condition in SchedulerPredicates
**What this PR does / why we need it**:
```
validates that NodeSelector is respected if matching [Conformance]
validates that required NodeAffinity setting is respected if matching
```
The two tests above make the assumption that the node names are equal to the `kubernetes.io/hostname` labels. Unfortunately, this is not necessarily true all the time. For instance, when using the AWS Cloud Provider + Container Linux:
- The node name is set using the AWS SDK's `ec2.Instance.PrivateDnsName` and has the form `ip-10-0-35-57.ca-central-1.compute.internal` [[1](https://github.com/kubernetes/kubernetes/blob/v1.7.1/pkg/cloudprovider/providers/aws/aws.go#L3343-L3346)] [[2](https://raw.githubusercontent.com/aws/aws-sdk-go/master/service/ec2/api.go)]
- The node's hostname, however, is a simple call to `os.Hostname()`, itself reading `/proc/sys/kernel/hostname`, which contains what the AWS DHCP assigned to the instance, typically the hostname short-form: `ip-10-0-16-137`. [[1](https://github.com/kubernetes/kubernetes/blob/v1.7.1/pkg/util/node/node.go#L43-L54)]
Consequently, we are trying to assign a pod to a node having the following label: `kubernetes.io/hostname=ip-10-0-35-57.ca-central-1.compute.internal` (in addition to the randomly generated label), whereas the actual label on the node is `kubernetes.io/hostname=ip-10-0-35-57`.
Furthermore, this inaccurate `kubernetes.io/hostname=<nodename>` condition is actually useless given we already match over a random label, that was assigned to that node. Later, the test ensures that the scheduled pod was scheduled to the right node by comparing the pod's node name and the node name we expected the pod to be on:
```
framework.ExpectNoError(framework.WaitForPodNotPending(cs, ns, labelPodName))
labelPod, err := cs.Core().Pods(ns).Get(labelPodName, metav1.GetOptions{})
framework.ExpectNoError(err)
Expect(labelPod.Spec.NodeName).To(Equal(nodeName))
```
The `k8s.io/apimachinery/pkg/types/nodename` data structure actually [warns](55bee3ad21/staging/src/k8s.io/apimachinery/pkg/types/nodename.go (L40-L43)) about the fact that the node name might be different than the hostname on AWS.
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue
Added sig-storage labels to upgrade tests and moved them to appropriate directory
**What this PR does / why we need it**: Adding necessary sig identifier for storage upgrade tests.
/release-note-none
Automatic merge from submit-queue (batch tested with PRs 48636, 49088, 49251, 49417, 49494)
StatefulSet: Remove `pod.alpha.kubernetes.io/initialized` annotation.
The `pod.alpha.kubernetes.io/initialized` annotation was originally a tool for validating StatefulSet's ordered Pod creation guarantees during the feature's alpha phase.
If set to "false" on a given Pod, it would interrupt StatefulSet's normal behavior. In v1.5.0, the annotation was deprecated and the default became "true" as part of StatefulSet's graduation to beta.
The annotation is now ignored, meaning it cannot be used to interrupt StatefulSet Pod management.
```release-note
StatefulSet: The deprecated `pod.alpha.kubernetes.io/initialized` annotation for interrupting StatefulSet Pod management is now ignored. If you were setting it to `true` or leaving it unset, no action is required. However, if you were setting it to `false`, be aware that previously-dormant StatefulSets may become active after upgrading.
```
ref #41605
ymqytw