Automatic merge from submit-queue
Fix taint based pod eviction for clusters where controller manager is not running with allocate-node-cidrs set
Fixes https://github.com/kubernetes/kubernetes/issues/42733
In my cluster, I have not set allocate-node-cidr, and It is causing taint based pod eviction to fail.
@gmarek @kubernetes/sig-scheduling-bugs @davidopp @derekwaynecarr
Automatic merge from submit-queue (batch tested with PRs 38805, 42362, 42862)
Let GC print specific message for RESTMapping failure
Make the error messages reported in https://github.com/kubernetes/kubernetes/issues/39816 to be more specific, also only print the message once.
I'll also update the garbage collector's doc to clearly state we don't support tpr yet.
We'll wait for the watchable discovery feature (@sttts are you going to work on that?) to land in 1.7, and then enable the garbage collector to handle TPR.
cc @hongchaodeng @MikaelCluseau @djMax
Automatic merge from submit-queue (batch tested with PRs 42024, 42780, 42808, 42640)
kubectl: respect DaemonSet strategy parameters for rollout status
It handles "after-merge" comments from #41116
cc @kargakis @janetkuo
I will add one more e2e test later. I need to handle some in company stuff.
Automatic merge from submit-queue (batch tested with PRs 42024, 42780, 42808, 42640)
Node controller test flake 39975 with delay for try function
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#39975
/cc @ncdc @gmarek @liggitt
Since the HPA controller pulls information from an external source that
makes no guarantees about consistency, it's possible for the HPA
to get into an infinite update loop -- if the metrics change with
every query, the HPA controller will run it's normal reconcilation,
post a status update, see that status update itself, fetch new metrics,
and if those metrics are different, post another status update, and
repeat. This can lead to continuously updating a single HPA.
By rate-limiting each HPA to once per sync interval, we prevent this
from happening.
The design of DaemonSet requires a relist before each phase (manage,
update, status) because it does not short-circuit and requeue for each
action triggered.
Automatic merge from submit-queue (batch tested with PRs 41890, 42593, 42633, 42626, 42609)
Remove everything that is not new from batch/v2alpha1
Fixes#37166.
@lavalamp you've asked for it
@erictune this is a prereq for moving CronJobs to beta. I initially planned to put all in one PR, but after I did that I figured out it'll be easier to review separately. ptal
@kubernetes/api-approvers @kubernetes/sig-api-machinery-pr-reviews ptal
Automatic merge from submit-queue (batch tested with PRs 42506, 42585, 42596, 42584)
RC/RS: Fix ignoring inactive Pods.
**What this PR does / why we need it**:
Fix typo that broke ignoring of inactive Pods in RC, and add unit test for that case.
**Which issue this PR fixes**:
Fixes#37479
**Special notes for your reviewer**:
**Release note**:
```release-note
```
Automatic merge from submit-queue (batch tested with PRs 42080, 41653, 42598, 42555)
StatefulSet: Respect ControllerRef
**What this PR does / why we need it**:
This is part of the completion of the [ControllerRef](https://github.com/kubernetes/community/blob/master/contributors/design-proposals/controller-ref.md) proposal. It brings StatefulSet into full compliance with ControllerRef. See the individual commit messages for details.
**Which issue this PR fixes**:
Fixes#36859
**Special notes for your reviewer**:
**Release note**:
```release-note
StatefulSet now respects ControllerRef to avoid fighting over Pods. At the time of upgrade, **you must not have StatefulSets with selectors that overlap** with any other controllers (such as ReplicaSets), or else [ownership of Pods may change](https://github.com/kubernetes/community/blob/master/contributors/design-proposals/controller-ref.md#upgrading).
```
cc @erictune @kubernetes/sig-apps-pr-reviews
Deployment should ignore Pods that don't match the selector, even if
they have a ControllerRef pointing to one of the ReplicaSets it owns.
The ReplicaSet itself will orphan the Pod as soon as it syncs.
The list functions in deployment/util are used outside the Deployment
controller itself. Therefore, they don't do actual adoption/orphaning.
However, they still need to avoid listing things that don't belong.
Although Deployment already applied its ControllerRef to adopt matching
ReplicaSets, it actually still used label selectors to list objects that
it controls. That meant it didn't actually follow the rules of
ControllerRef, so it could still fight with other controller types.
This should mean that the special handling for overlapping Deployments
is no longer necessary, since each Deployment will only see objects that
it owns (via ControllerRef).
Automatic merge from submit-queue (batch tested with PRs 31783, 41988, 42535, 42572, 41870)
controller: ensure deployment rollback is re-entrant
Make rollbacks re-entrant in the Deployment controller, otherwise
fast enqueues of a Deployment may end up in undesired behavior
- redundant rollbacks.
Fixes https://github.com/kubernetes/kubernetes/issues/36703
@kubernetes/sig-apps-bugs
Make rollbacks re-entrant in the Deployment controller, otherwise
fast enqueues of a Deployment may end up in undesired behavior
- redundant rollbacks.
Automatic merge from submit-queue
kubectl: respect deployment strategy parameters for rollout status
Fixes https://github.com/kubernetes/kubernetes/issues/40496
`rollout status` now respects the strategy parameters for a RollingUpdate Deployment. This means that it will exit as soon as minimum availability is reached for a rollout (note that if you allow maximum availability, `rollout status` will succeed as soon as the new pods are created)
@janetkuo @AdoHe ptal
Automatic merge from submit-queue
Small fix to the bootstrap TokenCleaner
Accidentally missed setting options and so the TokenCleaner was in a retry loop. Also moved from using an explicit timer over cached values vs. relying on a short resync timeout.
```release-note
```
Putting this in the 1.6 milestone as this is clearly a bug fix in a new feature.
Automatic merge from submit-queue (batch tested with PRs 42456, 42457, 42414, 42480, 42370)
In DaemonSet e2e test, don't check nodes with NoSchedule taints
Fixes#42345
For example, master node has a ismaster:NoSchedule taint. We don't expect pods to be created there without toleration.
cc @marun @lukaszo @kargakis @yujuhong @Random-Liu @davidopp @kubernetes/sig-apps-pr-reviews
Automatic merge from submit-queue (batch tested with PRs 42456, 42457, 42414, 42480, 42370)
controller: reduce log verbosity for deployments
Fixes https://github.com/kubernetes/kubernetes/issues/41187
Labeling as a bug fix since I think excessive logging should be considered as a bug.
@kubernetes/sig-apps-bugs
Accidentally missed setting options and so the TokenCleaner was in a retry loop. Also moved from using an explicit timer over cached values vs. relying on a short resync timeout.
Signed-off-by: Joe Beda <joe.github@bedafamily.com>
Automatic merge from submit-queue (batch tested with PRs 41306, 42187, 41666, 42275, 42266)
Implement bulk polling of volumes
This implements Bulk volume polling using ideas presented by
justin in https://github.com/kubernetes/kubernetes/pull/39564
But it changes the implementation to use an interface
and doesn't affect other implementations.
cc @justinsb
Automatic merge from submit-queue (batch tested with PRs 42365, 42429, 41770, 42018, 35055)
controller: statefulsets respect observed generation
StatefulSets do not update ObservedGeneration even though the API field is in place. This means that clients can never be sure whether the StatefulSet controller has observed the latest spec of a StatefulSet.
@kubernetes/sig-apps-bugs
This implements Bulk volume polling using ideas presented by
justin in https://github.com/kubernetes/kubernetes/pull/39564
But it changes the implementation to use an interface
and doesn't affect other implementations.
Automatic merge from submit-queue (batch tested with PRs 41984, 41682, 41924, 41928)
RC/RS: Fully Respect ControllerRef
**What this PR does / why we need it**:
This is part of the completion of the [ControllerRef](https://github.com/kubernetes/community/blob/master/contributors/design-proposals/controller-ref.md) proposal. It brings ReplicaSet and ReplicationController into full compliance with ControllerRef. See the individual commit messages for details.
**Which issue this PR fixes**:
Although RC/RS had partially implemented ControllerRef, they didn't use it to determine which controller to sync, or to update expectations. This could lead to instability or controllers getting stuck.
Ref: https://github.com/kubernetes/kubernetes/issues/24433
**Special notes for your reviewer**:
**Release note**:
```release-note
```
cc @erictune @kubernetes/sig-apps-pr-reviews
Automatic merge from submit-queue
HPA Controller: Use Custom Metrics API
This commit switches over the HPA controller to use the custom metrics
API. It also converts the HPA controller to use the generated client
in k8s.io/metrics for the resource metrics API.
In order to enable support, you must enable
`--horizontal-pod-autoscaler-use-rest-clients` on the
controller-manager, which will switch the HPA controller's MetricsClient
implementation over to use the standard rest clients for both custom
metrics and resource metrics. This requires that at the least resource
metrics API is registered with kube-aggregator, and that the controller
manager is pointed at kube-aggregator. For this to work, Heapster
must be serving the new-style API server (`--api-server=true`).
Before this merges, this will need kubernetes/metrics#2 to merge, and a godeps update to pull that in.
It's also semi-dependent on kubernetes/heapster#1537, but that is not required in order for this to merge.
**Release note**:
```release-note
Allow the Horizontal Pod Autoscaler controller to talk to the metrics API and custom metrics API as standard APIs.
```
Automatic merge from submit-queue
statefulset: wait for pvc cache sync
#42056 switched the statefulset controller to use the pvc shared informer/lister, but accidentally left out waiting for its cache to sync.
cc @kubernetes/sig-apps-pr-reviews @kargakis @foxish @kow3ns @smarterclayton @deads2k
Automatic merge from submit-queue
fix rsListerSynced and podListerSynced for DeploymentController
**What this PR does / why we need it**:
There is a mistake when initializing `DeploymentController`'s `rsListerSynced` and `podListerSynced` in `NewDeploymentController`, they are all initialized to `Deployment`'s `Informer`, so the `DeploymentController` maybe running before the `ReplicaSet` cache and `Pod` cache has been synced.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
Indeed according unit test is neccessary, but this bug fix is simple, and if the tests is neccessary I will submit another PR later.
**Release note**:
```release-note
```
This commit switches over the HPA controller to use the custom metrics
API. It also converts the HPA controller to use the generated client
in k8s.io/metrics for the resource metrics API.
In order to enable support, you must enable
`--horizontal-pod-autoscaler-use-rest-clients` on the
controller-manager, which will switch the HPA controller's MetricsClient
implementation over to use the standard rest clients for both custom
metrics and resource metrics. This requires that at the least resource
metrics API is registered with kube-aggregator, and that the controller
manager is pointed at kube-aggregator. For this to work, Heapster
must be serving the new-style API server (`--api-server=true`).
Automatic merge from submit-queue (batch tested with PRs 41234, 42186, 41615, 42028, 41788)
apimachinery: handle duplicated and conflicting type registration
Double registrations were leading to duplications in `KnownKinds()`. Conflicting registrations with same gvk, but different types were not detected.
Automatic merge from submit-queue (batch tested with PRs 41234, 42186, 41615, 42028, 41788)
Make DaemonSet respect critical pods annotation when scheduling
**What this PR does / why we need it**: #41612
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#41612
**Special notes for your reviewer**:
**Release note**:
```release-note
Make DaemonSet respect critical pods annotation when scheduling.
```
cc @kubernetes/sig-apps-feature-requests @erictune @vishh @liggitt @kargakis @lukaszo @piosz @davidopp
Automatic merge from submit-queue
Enforce Node Allocatable via cgroups
This PR enforces node allocatable across all pods using a top level cgroup as described in https://github.com/kubernetes/community/pull/348
This PR also provides an option to enforce `kubeReserved` and `systemReserved` on user specified cgroups.
This PR will by default make kubelet create top level cgroups even if `kubeReserved` and `systemReserved` is not specified and hence `Allocatable = Capacity`.
```release-note
New Kubelet flag `--enforce-node-allocatable` with a default value of `pods` is added which will make kubelet create a top level cgroup for all pods to enforce Node Allocatable. Optionally, `system-reserved` & `kube-reserved` values can also be specified separated by comma to enforce node allocatable on cgroups specified via `--system-reserved-cgroup` & `--kube-reserved-cgroup` respectively. Note the default value of the latter flags are "".
This feature requires a **Node Drain** prior to upgrade failing which pods will be restarted if possible or terminated if they have a `RestartNever` policy.
```
cc @kubernetes/sig-node-pr-reviews @kubernetes/sig-node-feature-requests
TODO:
- [x] Adjust effective Node Allocatable to subtract hard eviction thresholds
- [x] Add unit tests
- [x] Complete pending e2e tests
- [x] Manual testing
- [x] Get the proposal merged
@dashpole is working on adding support for evictions for enforcing Node allocatable more gracefully. That work will show up in a subsequent PR for v1.6
Automatic merge from submit-queue (batch tested with PRs 42053, 41282, 42056, 41663, 40927)
Fully remove hand-written listers and informers
Note: the first commit is from #41927. Adding do-not-merge for now as we'll want that to go in first, and then I'll rebase this on top.
Update statefulset controller to use a lister for PVCs instead of a client request. Also replace a unit test's dependency on legacylisters with the generated ones. cc @kargakis @kow3ns @foxish @kubernetes/sig-apps-pr-reviews
Remove all references to pkg/controller/informers and pkg/client/legacylisters, and remove those packages.
@smarterclayton @deads2k this should be it!
cc @gmarek @wojtek-t @derekwaynecarr @kubernetes/sig-scalability-pr-reviews
Kubernetes Submit Queue