Automatic merge from submit-queue (batch tested with PRs 46450, 46272, 46453, 46019, 46367)
Move MountVolume.SetUp succeeded to debug level
This message is verbose and repeated over and over again in log files
creating a lot of noise. Leave the message in, but require a -v in
order to actually log it.
**What this PR does / why we need it**: Moves a verbose log message to actually be verbose.
**Which issue this PR fixes** fixes#46364Fixes#29059
Automatic merge from submit-queue (batch tested with PRs 46383, 45645, 45923, 44884, 46294)
Node status updater now deletes the node entry in attach updates...
… when node is missing in NodeInformer cache.
- Added RemoveNodeFromAttachUpdates as part of node status updater operations.
**What this PR does / why we need it**: Fixes issue of unnecessary node status updates when node is deleted.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#42438
**Special notes for your reviewer**: Unit tested added, but a more comprehensive test involving the attach detach controller requires certain testing functionality that is currently absent, and will require larger effort. Will be added at a later time.
There is an edge case caused by the following steps:
1) A node is deleted and restarted. The node exists, but is not yet recognized by Kubernetes.
2) A pod requiring a volume attach with nodeName specifically set to this node.
This would make the pod stuck in ContainerCreating state. This is low-pri since it's a specific edge case that can be avoided.
**Release note**:
```release-note
NONE
```
This message is verbose and repeated over and over again in log files
creating a lot of noise. Leave the messsage in, but require a -v in
order to actually log it.
Fixes#29059
When the attach/detach controller crashes and a pod with attached PV is deleted
afterwards the controller will never detach the pod's attached volumes. To
prevent this the controller should try to recover the state from the nodes
status.
This implements Bulk volume polling using ideas presented by
justin in https://github.com/kubernetes/kubernetes/pull/39564
But it changes the implementation to use an interface
and doesn't affect other implementations.
To safely mark a volume detached when the volume controller manager is used.
An example of one such problem:
1. pod is created, volume is added to desired state of the world
2. reconciler process starts
3. reconciler starts MountVolume, which is kicked off asynchronously via
operation_executor.go
4. MountVolume mounts the volume, but hasn't yet marked it as mounted
5. pod is deleted, volume is removed from desired state of the world
6. reconciler detects volume is no longer in desired state of world,
removes it from volumes in use
7. MountVolume tries to mark volume in use, throws an error because
volume is no longer in actual state of world list.
8. controller-manager tries to detach the volume, this fails because it
is still mounted to the OS.
9. EBS gets stuck indefinitely in busy state trying to detach.
This is a fix on top #38124. In this fix, we move the logic to filter
out shared mount references into operation_executor's UnmountDevice
function to avoid this part is being used by other types volumes such as
rdb, azure etc. This filter function should be only needed during
unmount device for GCI image.
Automatic merge from submit-queue
Reduce verbosity of volume reconciler
**What this PR does / why we need it**:
It reduces the log verbosity for attaching of volumes
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
Reduce verbosity of volume reconciler when attaching volumes
```
Set logging level for information about attaching of volumes to from 1 to 4
Otherwise the log is spammed with one line per 100ms while attaching is
in progress and afterwards as long as the volume is attached.
Automatic merge from submit-queue
refactor DeviceOpened() so it won't return error if device doesn't exist
<!-- Thanks for sending a pull request! Here are some tips for you:
1. If this is your first time, read our contributor guidelines https://github.com/kubernetes/kubernetes/blob/master/CONTRIBUTING.md and developer guide https://github.com/kubernetes/kubernetes/blob/master/docs/devel/development.md
2. If you want *faster* PR reviews, read how: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/faster_reviews.md
3. Follow the instructions for writing a release note: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/pull-requests.md#release-notes
-->
**What this PR does / why we need it**:
DeviceOpened() is called after device is unmounted but before detached. Some volumes such as rbd don't support 3rd party detach, they have to be detached during unmount. Once detached, the device path vanishes. This causes false alarm when DeviceOpened() is called.
The fix is to ignore error IsNotExist
**Which issue this PR fixes** _(optional, in `fixes #<issue number>(, #<issue_number>, ...)` format, will close that issue when PR gets merged)_: fixes #
**Special notes for your reviewer**:
@kubernetes/sig-storage
**Release note**:
<!-- Steps to write your release note:
1. Use the release-note-* labels to set the release note state (if you have access)
2. Enter your extended release note in the below block; leaving it blank means using the PR title as the release note. If no release note is required, just write `NONE`.
-->
``` release-note
```
Signed-off-by: Huamin Chen hchen@redhat.com
At master volume reconciler, the information about which volumes are
attached to nodes is cached in actual state of world. However, this
information might be out of date in case that node is terminated (volume
is detached automatically). In this situation, reconciler assume volume
is still attached and will not issue attach operation when node comes
back. Pods created on those nodes will fail to mount.
This PR adds the logic to periodically sync up the truth for attached volumes kept in the actual state cache. If the volume is no longer attached to the node, the actual state will be updated to reflect the truth. In turn, reconciler will take actions if needed.
To avoid issuing many concurrent operations on cloud provider, this PR
tries to add batch operation to check whether a list of volumes are
attached to the node instead of one request per volume.
More details are explained in PR #33760
When kubelet restarts, all the information about the volumes will be
gone from actual/desired states. When update node status with mounted
volumes, the volume list might be empty although there are still volumes
are mounted and in turn causing master to detach those volumes since
they are not in the mounted volumes list. This fix is to make sure only
update mounted volumes list after reconciler starts sync states process.
This sync state process will scan the existing volume directories and
reconstruct actual states if they are missing.
This PR also fixes the problem during orphaned pods' directories. In
case of the pod directory is unmounted but has not yet deleted (e.g.,
interrupted with kubelet restarts), clean up routine will delete the
directory so that the pod directoriy could be cleaned up (it is safe to
delete directory since it is no longer mounted)
The third issue this PR fixes is that during reconstruct volume in
actual state, mounter could not be nil since it is required for creating
container.VolumeMap. If it is nil, it might cause nil pointer exception
in kubelet.
Details are in proposal PR #33203
We had another bug where we confused the hostname with the NodeName.
To avoid this happening again, and to make the code more
self-documenting, we use types.NodeName (a typedef alias for string)
whenever we are referring to the Node.Name.
A tedious but mechanical commit therefore, to change all uses of the
node name to use types.NodeName
Also clean up some of the (many) places where the NodeName is referred
to as a hostname (not true on AWS), or an instanceID (not true on GCE),
etc.
This PR tries to fix issue #29324. This cause of this issue is a race
condition happens when marking volumes as attached for node status. This
PR tries to clean up the logic of when and where to mark volumes as
attached/detached. Basically the workflow as follows,
1. When volume is attached sucessfully, the volume and node info is
added into nodesToUpdateStatusFor to mark the volume as attached to the
node.
2. When detach request comes in, it will check whether it is safe to
detach now. If the check passes, remove the volume from volumesToReportAsAttached
to indicate the volume is no longer considered as attached now.
Afterwards, reconciler tries to update node status and trigger detach
operation. If any of these operation fails, the volume is added back to
the volumesToReportAsAttached list showing that it is still attached.
These steps should make sure that kubelet get the right (might be
outdated) information about which volume is attached or not. It also
garantees that if detach operation is pending, kubelet should not
trigger any mount operations.
This PR is to add event message when attaching volume fails to help
users to debug. For detach failure, may address in a different PR since
it requires more data structure change.
Automatic merge from submit-queue
Add Events for operation_executor to show status of mounts, failed/successful to show in describe events
Fixes#27590
@saad-ali @pmorie @erinboyd
After talking with @pmorie last week about the above issue, I decided to poke around and see if I could remedy. The refactoring broke my previous UXP merged PR's that correctly showed failed mount errors in the describe events. However, Not sure I implemented correctly, but it tested out and seems to be working, let me know what I missed or if this is not the correct approach.
```
Events:
FirstSeen LastSeen Count From SubobjectPath Type Reason Message
--------- -------- ----- ---- ------------- -------- ------ -------
2m 2m 1 {default-scheduler } Normal Scheduled Successfully assigned nfs-bb-pod1 to 127.0.0.1
44s 44s 1 {kubelet 127.0.0.1} Warning FailedMount Unable to mount volumes for pod "nfs-bb-pod1_default(a94f64f1-37c9-11e6-9aa5-52540073d346)": timeout expired waiting for volumes to attach/mount for pod "nfs-bb-pod1"/"default". list of unattached/unmounted volumes=[nfsvol]
44s 44s 1 {kubelet 127.0.0.1} Warning FailedSync Error syncing pod, skipping: timeout expired waiting for volumes to attach/mount for pod "nfs-bb-pod1"/"default". list of unattached/unmounted volumes=[nfsvol]
38s 38s 1 {kubelet } Warning FailedMount Unable to mount volumes for pod "a94f64f1-37c9-11e6-9aa5-52540073d346": Mount failed: exit status 32
Mounting arguments: nfs1.rhs:/opt/data99 /var/lib/kubelet/pods/a94f64f1-37c9-11e6-9aa5-52540073d346/volumes/kubernetes.io~nfs/nfsvol nfs []
Output: mount.nfs: Connection timed out
Resolution hint: Check and make sure the NFS Server exists (ensure that correct IPAddress/Hostname was given) and is available/reachable.
Also make sure firewall ports are open on both client and NFS Server (2049 v4 and 2049, 20048 and 111 for v3).
Use commands telnet <nfs server> <port> and showmount <nfs server> to help test connectivity.
```
Currently kubelet volume management works on the concept of desired
and actual world of states. The volume manager periodically compares the
two worlds and perform volume mount/unmount and/or attach/detach
operations. When kubelet restarts, the cache of those two worlds are
gone. Although desired world can be recovered through apiserver, actual
world can not be recovered which may cause some volumes cannot be cleaned
up if their information is deleted by apiserver. This change adds the
reconstruction of the actual world by reading the pod directories from
disk. The reconstructed volume information is added to both desired
world and actual world if it cannot be found in either world. The rest
logic would be as same as before, desired world populator may clean up
the volume entry if it is no longer in apiserver, and then volume
manager should invoke unmount to clean it up.
For non-attachable volumes, do not call GetVolumeName on the plugin and instead
generate a unique name based on the identity of the pod and the name of the volume
within the pod.
Allow mount volume operations to run in parallel for non-attachable
volume plugins.
Allow unmount volume operations to run in parallel for all volume
plugins.
Ensure that kublet marks VolumeInUse before checking if it is Attached.
Also ensures that the attach/detach controller always fetches a fresh
copy of the node object before detach (instead ofKubelet relying on node
informer cache).
Modify attach/detach controller to keep track of volumes to report
attached in Node VolumeToAttach status.
Modify kubelet volume manager to wait for volume to show up in Node
VolumeToAttach status.
Implement exponential backoff for errors in volume manager and attach
detach controller
This commit adds a new volume manager in kubelet that synchronizes
volume mount/unmount (and attach/detach, if attach/detach controller
is not enabled).
This eliminates the race conditions between the pod creation loop
and the orphaned volumes loops. It also removes the unmount/detach
from the `syncPod()` path so volume clean up never blocks the
`syncPod` loop.
Tim Hockin