Automatic merge from submit-queue
Pipe in upgrade image target for kube-proxy migration tests
**What this PR does / why we need it**:
https://k8s-testgrid.appspot.com/sig-network#gci-gce-latest-upgrade-kube-proxy-ds&width=20
and
https://k8s-testgrid.appspot.com/sig-network#gci-gce-latest-downgrade-kube-proxy-ds&width=20
are still failing.
Reproduced it locally and found node image is being default to debian during upgrade (it was gci before upgrade) because we don't pass in `gci` via `--upgrade--target`. And for some reasons (haven't figured out yet), the upgraded node uses debian image with gci startupscripts...
This PR pipes in `--upgrade-target` for kube-proxy migration tests, hopefully in conjunction with https://github.com/kubernetes/test-infra/pull/4447 it will bring the tests back to normal.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #NONE
**Special notes for your reviewer**:
Sorry for bothering again.
/assign @krousey
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 52097, 52054)
Move paused deployment e2e tests to integration
**What this PR does / why we need it**:
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: xref #52113
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue
StatefulSet: Deflake e2e RunHostCmd.
The initial retry up to 20s was giving up too soon. I'm seeing this test flake because the Node rebooted and it takes ~2min to recover. Now StatefulSet RunHostCmd calls will use the same 5min timeout as with other Pod state checks.
ref #48031
The initial retry up to 20s was giving up too soon.
I'm seeing this test flake because the Node rebooted and it takes ~2min
to recover.
Now StatefulSet RunHostCmd calls will use the same 5min timeout as with
other Pod state checks.
Automatic merge from submit-queue (batch tested with PRs 51839, 51987)
Disable rbac/v1alpha1, settings/v1alpha1, and scheduling/v1alpha1 by default
**What this PR does / why we need it**: Disables alpha features which were previously enabled by default. Also changes tests which relied on these alpha features being enabled by default.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#47691
**Special notes for your reviewer**:
**Release note**:
```release-note
Fixed a bug where some alpha features were enabled by default.
The feature is still Alpha and at times, the IP address previously used
by the load balancer in the test will not completely freed even after
the load balancer is long gone. In this case, the test URL with the IP
would return a 404 response. Tolerate this error and retry until the new
load balancer is fully established.
Charge object count when object is created, no matter if the object is
initialized or not.
Charge the remaining quota when the object is initialized.
Also, checking initializer.Pending and initializer.Result when
determining if an object is initialized. We didn't need to check them
because before 51082, having 0 pending initializer and nil
initializers.Result is invalid.
Automatic merge from submit-queue (batch tested with PRs 51733, 51838)
Decouple kube-proxy upgrade/downgrade tests from upgradeTests
**What this PR does / why we need it**:
Fixes the failing kube-proxy migration CI jobs:
- https://k8s-testgrid.appspot.com/sig-network#gci-gce-latest-upgrade-kube-proxy-ds
- https://k8s-testgrid.appspot.com/sig-network#gci-gce-latest-downgrade-kube-proxy-ds
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#51729
**Special notes for your reviewer**:
/assign @krousey @nicksardo
Could you please take a look post code-freeze (I believe it is fixing things)? Thanks!
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 51733, 51838)
Relax update validation of uninitialized pod
Split from https://github.com/kubernetes/kubernetes/pull/50344
Fix https://github.com/kubernetes/kubernetes/issues/47837
* Let the podStrategy to only call `validation.ValidatePod()` if the old pod is not initialized, so fields are mutable.
* Let the podStatusStrategy refuse updates if the old pod is not initialized.
cc @smarterclayton
```release-note
Pod spec is mutable when the pod is uninitialized. The apiserver requires the pod spec to be valid even if it's uninitialized. Updating the status field of uninitialized pods is invalid.
```
Automatic merge from submit-queue (batch tested with PRs 51915, 51294, 51562, 51911)
Remove OutOfDisk from controllers
This is one of the working items for #48843 for 1.8.
This changes the scheduler and daemonset controllers to no longer respect the OutOfDisk condition. The kubelet has not published OutOfDisk=True since 1.5.
This still preserves the Toleration for the OutOfDisk condition, as (I think?) this is required for backwards compatibility. I added TODOs to remove this in 1.10.
Automatic merge from submit-queue (batch tested with PRs 51833, 51936)
Changed volume IO e2e test to verify file hash instead of content.
**What this PR does / why we need it**: The existing way of verifying file content takes too much memory, causing processes to be OOM killed.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes https://github.com/kubernetes/kubernetes/issues/51717
**Release note**:
```release-note
NONE
```
/sig storage
/release-note-none
/assign @jeffvance @rootfs
/cc @msau42
Automatic merge from submit-queue
Enable batch/v1beta1.CronJobs by default
This PR re-applies the cronjobs->beta back (https://github.com/kubernetes/kubernetes/pull/51720) with the fix from @shyamjvs.
Fixes#51692
@apelisse @dchen1107 @smarterclayton ptal
@janetkuo @erictune fyi
Automatic merge from submit-queue
Remove deprecated init-container in annotations
fixes#50655fixes#51816closes#41004fixes#51816
Builds on #50654 and drops the initContainer annotations on conversion to prevent bypassing API server validation/security and targeting version-skewed kubelets that still honor the annotations
```release-note
The deprecated alpha and beta initContainer annotations are no longer supported. Init containers must be specified using the initContainers field in the pod spec.
```
Automatic merge from submit-queue
Job failure policy controller support
**What this PR does / why we need it**:
Start implementing the support of the "Backoff policy and failed pod limit" in the ```JobController``` defined in https://github.com/kubernetes/community/pull/583.
This PR depends on a previous PR #48075 that updates the K8s API types.
TODO:
* [X] Implement ```JobSpec.BackoffLimit``` support
* [x] Rebase when #48075 has been merged.
* [X] Implement end2end tests
implements https://github.com/kubernetes/community/pull/583
**Special notes for your reviewer**:
**Release note**:
```release-note
Add backoff policy and failed pod limit for a job
```
Automatic merge from submit-queue (batch tested with PRs 51805, 51725, 50925, 51474, 51638)
Flexvolume dynamic plugin discovery: Prober unit tests and basic e2e test.
**What this PR does / why we need it**: Tests for changes introduced in PR #50031 .
As part of the prober unit test, I mocked filesystem, filesystem watch, and Flexvolume plugin initialization.
Moved the filesystem event goroutine to watcher implementation.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#51147
**Special notes for your reviewer**:
First commit contains added functionality of the mock filesystem.
Second commit is the refactor for moving mock filesystem into a common util directory.
Third commit is the unit and e2e tests.
**Release note**:
```release-note
NONE
```
/release-note-none
/sig storage
/assign @saad-ali @liggitt
/cc @mtaufen @chakri-nelluri @wongma7
Job failure policy integration in JobController. From the
JobSpec.BackoffLimit the JobController will define the backoff
duration between Job retry.
It use the ```workqueue.RateLimitingInterface``` to store the number of
"retry" as "requeue" and the default Job backoff initial duration is set
during the initialization of the ```workqueue.RateLimiter.
Since the number of retry for each job is store in a local structure
"JobController.queue" if the JobController restarts the number of retries
will be lost and the backoff duration will be reset to 0.
Add e2e test for Job backoff failure policy
Automatic merge from submit-queue (batch tested with PRs 51583, 51283, 51374, 51690, 51716)
Unify initializer name validation
Unify the validation rules on initializer names. Fix https://github.com/kubernetes/kubernetes/issues/51843.
```release-note
Action required: validation rule on metadata.initializers.pending[x].name is tightened. The initializer name needs to contain at least three segments separated by dots. If you create objects with pending initializers, (i.e., not relying on apiserver adding pending initializers according to initializerconfiguration), you need to update the initializer name in existing objects and in configuration files to comply to the new validation rule.
```
Automatic merge from submit-queue
Use the right image for the right platform in the e2e tests
**What this PR does / why we need it**:
This PR is for enabling kubernetes tests for multi architecture platform
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#38067
**Special notes for your reviewer**:
This will enable conformance tests for all the supported architectures.
**Release note**:
```release-note
Make all e2e tests lookup image to use from a centralized place. In that centralized place, add support for multiple platforms.
```
x-ref #38067
Automatic merge from submit-queue (batch tested with PRs 51632, 51055, 51676, 51560, 50007)
test/e2e/auth: fix audit log test format parsing
Fixes https://github.com/kubernetes/kubernetes/issues/51556
```release-note
NONE
```
cc @CaoShuFeng
Still need to figure out how to run this test locally.
Automatic merge from submit-queue (batch tested with PRs 51513, 51515, 50570, 51482, 51448)
Removes redundant prefix in cluster-lifecycle e2e test names
**What this PR does / why we need it**:
Removes redundant prefix in cluster-lifecycle e2e test names
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
Umbrella issue #49161
xref: #50054
**Special notes for your reviewer**:
/cc @jbeda
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 50775, 51397, 51168, 51465, 51536)
Enable batch/v1beta1.CronJobs by default
This PR moves to CronJobs beta entirely, enabling `batch/v1beta1` by default.
Related issue: #41039
@erictune @janetkuo ptal
```release-note
Promote CronJobs to batch/v1beta1.
```
Automatic merge from submit-queue (batch tested with PRs 50775, 51397, 51168, 51465, 51536)
Allow bearer requests to be proxied by kubectl proxy
Use a fake transport to capture changes to the request and then surface
them back to the end user.
Fixes#50466
@liggitt no tests yet, but works locally
Kubernetes Submit Queue