In order to allow for a smoother UX with CRIs different than Docker, we have to
make the --cri-socket command line flag optional when just one CRI is
installed.
This change does that by doing the following:
- Introduce a new runtime function (DetectCRISocket) that will attempt to
detect a CRI socket, or return an appropriate error.
- Default to using the above function if --cri-socket is not specified and
CRISocket in NodeRegistrationOptions is empty.
- Stop static defaulting to DefaultCRISocket. And rename it to
DefaultDockerCRISocket. Its use is now narrowed to "Docker or not"
distinguishment and tests.
- Introduce AddCRISocketFlag function that adds --cri-socket flag to a flagSet.
Use that in all commands, that support --cri-socket.
- Remove the deprecated --cri-socket-path flag from kubeadm config images pull
and deprecate --cri-socket in kubeadm upgrade apply.
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
Bump MinimumControlPlaneVersion and MinimumKubeletVersion to v1.12 and update
any related tests.
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
Up until now UnifiedControlPlaneImage existed as a string value as part of the
ClusterConfiguration. This provided an override for the Kubernetes core
component images with a single custom image. It is mostly used to override the
control plane images with the hyperkube image. This saves both bandwith and
disk space on the control plane nodes.
Unfortunately, this specified an entire image string (complete with its prefix,
image name and tag). This disables upgrades of setups that use hyperkube.
Therefore, to enable upgrades on hyperkube setups and to make configuration
more convenient, the UnifiedControlPlaneImage option is replaced with a boolean
option, called UseHyperKubeImage. If set to true, this option replaces the
image name of any Kubernetes core components with hyperkube, thus allowing for
upgrades and respecting the image repository and version, specified in the
ClusterConfiguration.
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
Until now the control plane timeout was fixed to 4 minutes and users did not
have the ability to change it. This commit allows that timeout to be configured
via the new `timeoutForControlPlane` option in the API server config (itself a
member of the ClusterConfiguration).
The default timeout is still 4 minutes.
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
This fixes an issue where SRV records were incorrectly being compressed.
Also updated kubedns version for kubeadm
Upgrade to 1.14.12 with manifest support. Runs dnsmasq version 2.78
Automatic merge from submit-queue (batch tested with PRs 63011, 68089, 67944, 68132). If you want to cherry-pick this change to another branch, please follow the instructions here: https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md.
Kubeadm upload and fetch of kubeam config v1alpha3
**What this PR does / why we need it**:
This PR implements upload and fetch of kubeam config v1alpha3 from cluster.
More in detail:
In upload, `kubeadm-config` gets
- `ClusterConfiguration` (without components config which are already stored in separated ConfigMaps)
- `ClusterStatus`(initialised or updated with the API endpoint of the current node)
During fetch `InitConfiguration` is composed with:
- `ClusterConfiguration` from `kubeadm-config`
- The `APIEndpoint` of the current node from `ClusterStatus` in `kubeadm-config`
- Component configs from corresponding ConfigMaps
**Which issue(s) this PR fixes** :
refs https://github.com/kubernetes/kubeadm/issues/911, refs https://github.com/kubernetes/kubeadm/issues/963
**Special notes for your reviewer**:
In order to implement this it was necessary to extend current component config management with a new GetFromConfigMap operation. This is implemented in a separated commit "
implement component configs GetFromConfigMap".
The real change build on this (commi "upload and fetch kubeadm v1alpha3")
**Release note**:
```release-note
NONE
```
/cc @kubernetes/sig-cluster-lifecycle-pr-reviews
/sig cluster-lifecycle
/area kubeadm
/kind enhancement
/assign @luxas
/assign @timothysc
/cc @chuckha @rosti @neolit123 @liztio
Automatic merge from submit-queue (batch tested with PRs 67397, 68019). If you want to cherry-pick this change to another branch, please follow the instructions here: https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md.
kubeadm: fix offline and air-gapped support
**What this PR does / why we need it**:
1.
Change the error output of getAllDefaultRoutes() so that it includes
information on which files were probed for the IP routing tables
even if such files are obvious.
Introduce a new error type which can be used to figure out of this
error is exactly of the "no routes" type.
2.
If netutil.ChooseBindAddress() fails looking up IP route tables
it will fail with an error in which case the kubeadm config
code will hard stop.
This scenario is possible if the Linux user intentionally disables
the WiFi from the distribution settings. In such a case the distro
could empty files such files as /proc/net/route and ChooseBindAddress()
will return an error.
For improved offline support, don't error on such scenarios but instead
show a warning. This is done by using the NoRoutesError type.
Also default the address to 0.0.0.0.
While doing that, prevent some commands like `init`, `join` and also
phases like `controlplane` and `certs` from using such an invalid
address.
3.
If there is no internet, label versions fail and this breaks
air-gapped setups unless the users pass an explicit version.
To work around that:
- Remain using 'release/stable-x.xx' as the default version.
- On timeout or any error different from status 404 return error
- On status 404 fallback to using the version of the client via
kubeadmVersion()
Add unit tests for kubeadmVersion().
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
refs kubernetes/kubeadm#1041
**Special notes for your reviewer**:
1st and second commits fix offline support.
3rd commit fixes air-gabbed support (as discussed in the linked issue)
the api-machinery change is only fmt.Errorf() related.
**Release note**:
```release-note
kubeadm: fix air-gapped support and also allow some kubeadm commands to work without an available networking interface
```
/cc @kubernetes/sig-cluster-lifecycle-pr-reviews
/cc @kubernetes/sig-api-machinery-pr-reviews
/assign @kad
/assign @xiangpengzhao
/area UX
/area kubeadm
/kind bug
1) Do not fail in case a bind address cannot be obtained
If netutil.ChooseBindAddress() fails looking up IP route tables
it will fail with an error in which case the kubeadm config
code will hard stop.
This scenario is possible if the Linux user intentionally disables
the WiFi from the distribution settings. In such a case the distro
could empty files such files as /proc/net/route and ChooseBindAddress()
will return an error.
For improved offline support, don't error on such scenarios but instead
show a warning. This is done by using the NoRoutesError type.
Also default the address to 0.0.0.0.
While doing that, prevent some commands like `init`, `join` and also
phases like `controlplane` and `certs` from using such an invalid
address.
Add unit tests for the new function for address verification.
2) Fallback to local client version
If there is no internet, label versions fail and this breaks
air-gapped setups unless the users pass an explicit version.
To work around that:
- Remain using 'release/stable-x.xx' as the default version.
- On timeout or any error different from status 404 return error
- On status 404 fallback to using the version of the client via
kubeadmVersion()
Add unit tests for kubeadmVersion().
Co-authored-by: Alexander Kanevskiy <alexander.kanevskiy@intel.com>
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
kubeadm - set peer urls for default etcd instance
**What this PR does / why we need it**:
Override the default peer URLs for the default etcd instance. Previously we left the defaults, which meant the peer URL was unsecured previously.
**Release note**:
```release-note
kubeadm - Ensure the peer port is secured by explicitly setting the peer URLs for the default etcd instance.
kubeadm - Ensure that the etcd certificates are generated using a proper CN
kubeadm - Update generated etcd peer certificate to include localhost addresses for the default configuration.
kubeadm - Increase the manifest update timeout to make upgrades a bit more reliable.
```
- Set peer urls for default etcd instance to avoid leaving peer port unsecured
- Update generated etcd peer certificate SANs to include localhost
- Use a proper CN for etcd server and peer certificates
- Increase the manifest update timeout
Sandeep Rajan