Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Using ipset doing SNAT and packet filter in IPVS kube-proxy
**What this PR does / why we need it**:
Try ipset in ipvs proxy mode.
**Which issue this PR fixes**:
fixes#54203
xref: #53393, #53775
**Special notes for your reviewer**:
**Release note**:
```release-note
Using ipset doing SNAT and packet filtering in IPVS kube-proxy
```
/sig network
/area kube-proxy
Automatic merge from submit-queue (batch tested with PRs 55988, 53555, 55858). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
add test for slice
Signed-off-by: yanxuean <yan.xuean@zte.com.cn>
**What this PR does / why we need it**:
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 55009, 55532, 55601, 52569, 55533). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Kube-proxy adds forward rules to ensure NodePorts work
**What this PR does / why we need it**:
Updates kube-proxy to set up proper forwarding so that NodePorts work with docker 1.13 without depending on iptables FORWARD being changed manually/externally.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#39823
**Special notes for your reviewer**:
@thockin I used option number 2 that I mentioned in the #39823 issue, please let me know what you think about this change. If you are happy with the change then I can try to add tests but may need a little direction about what and where to add them.
**Release note**:
```release-note
Add iptables rules to allow Pod traffic even when default iptables policy is to reject.
```
Automatic merge from submit-queue (batch tested with PRs 54005, 55127, 53850, 55486, 53440). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Containerized mount utilities
This is implementation of https://github.com/kubernetes/community/pull/589
@tallclair @vishh @dchen1107 PTAL
@kubernetes/sig-node-pr-reviews
**Release note**:
```release-note
Kubelet supports running mount utilities and final mount in a container instead running them on the host.
```
Automatic merge from submit-queue (batch tested with PRs 55247, 55324, 55261, 55147, 54052). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
remove unused function in keymutex_test.go file
**What this PR does / why we need it**:
remove unused function in keymutex_test.go file
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Add the iptables wait flag change to more places
There were a few places that the last PR (https://github.com/kubernetes/kubernetes/pull/54763) missed because the flags that PR covered were of the form `-w2`. Some of the code had `--wait=2`. This changes that code to use the same global variable for the wait setting so that everything is consistent.
Automatic merge from submit-queue (batch tested with PRs 53592, 52562, 55175, 55213). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Check RegisterMetricAndTrackRateLimiterUsage error when starting BootstrapSigner & TokenCleaner controllers
**What this PR does / why we need it**:
Prevent `BootstrapSigner` and `TokenCleaner` controllers to start if `metrics.RegisterMetricAndTrackRateLimiterUsage` returns an error.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: complements #53571
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
There were a few places that the last PR https://github.com/kubernetes/kubernetes/pull/54763 missed because the flags that PR covered were of the form -w2. Some of the code had --wait=2. This changes that code to use the same global variable for the wait setting so that everything is consistent.
Automatic merge from submit-queue (batch tested with PRs 55114, 52976, 54871, 55122, 55140). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Fix netsh checkIPExists in Chinese
Signed-off-by: sakeven <jc5930@sina.cn>
**What this PR does / why we need it**:
On Windows in Chinese language, kube-proxy ip dump outputs like this:
```
接口 "vEthernet (KubeProxySwitch)" 的配置
DHCP 已启用: 否
IP 地址: 10.96.0.2
子网前缀: 10.0.0.0/8 (掩码 255.0.0.0)
IP 地址: 10.99.233.195
子网前缀: 10.0.0.0/8 (掩码 255.0.0.0)
IP 地址: 10.109.68.207
子网前缀: 10.0.0.0/8 (掩码 255.0.0.0)
IP 地址: 10.110.60.68
子网前缀: 10.0.0.0/8 (掩码 255.0.0.0)
IP 地址: 10.110.252.225
子网前缀: 10.0.0.0/8 (掩码 255.0.0.0)
InterfaceMetric: 15
```
And here we used ''IP Address:" in English to search IP, so it would never succeed even if ip address was right here. ''IP Address:" in Chinese is "IP 地址: "。
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
**Release note**:
```
NONE
```
Automatic merge from submit-queue (batch tested with PRs 54800, 53898, 54812, 54921, 53558). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
rename metric reflector_xx_last_resource_version
**What this PR does / why we need it**:
mv reflector name from metric name to metric label
before:
```
reflector_k8s_io_kubernetes_pkg_client_informers_informers_generated_internalversion_factory_go:73_8664_last_resource_version{instance="104.154.20.21:443",job="kubernetes-apiservers"}
```
after
```
reflector_last_resource_version{instance="10.0.2.15:6443",job="kubernetes-apiservers",name="k8s_io_kubernetes_pkg_client_informers_informers_generated_internalversion_factory_go_73_8664"}
```
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes#52121
**Special notes for your reviewer**:
None
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Kubeadm - Added initial support for Windows worker nodes to join cluster using kubeadm
**What this PR does / why we need it**:
This PR adds initial support for adding a Windows worker node to a Kubernetes cluster with kubeadm. Also adds Windows build of kubeadm to node build targets.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes https://github.com/kubernetes/kubeadm/issues/364
**Special notes for your reviewer**:
Depends on #53730
**Release note**:
```release-note
kubeadm: Add support for adding a Windows node
```
Automatic merge from submit-queue (batch tested with PRs 46341, 53629). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
fix azure file mount limit issue on windows due to using drive letter
**What this PR does / why we need it**:
It's not necessary to use drive letter in azure file mount, correct usage for New-SmbGlobalMapping is like following:
```
New-SmbGlobalMapping -RemotePath $AzureFilePath -Credential $Credential
mklink /D $mountPath $AzureFilePath
```
I removed the `LocalPath` parameter in New-SmbGlobalMapping
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#54668
Without this PR, there is a limit(25) for azure file mount number on each node because only 25 drive letters could be used on each windows node, With this PR, there would be no such limit.
**Special notes for your reviewer**:
@PatrickLang
**Release note**:
```
fix azure file mount limit issue on windows due to using drive letter
```
/sig azure
/sig windows
For testing purposes, we want to unregister a previously registered
rate limiter prometheus metric and stop the goroutine that updates
this metric.
Signed-off-by: Ferran Rodenas <rodenasf@vmware.com>
Automatic merge from submit-queue (batch tested with PRs 54533, 54777, 54763, 54806, 54703). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
make iptables wait flag generic and tune it to 5 seconds
Excerpt from [bug](https://bugzilla.redhat.com/show_bug.cgi?id=1506396) opened by @eparis
> iptables-restore has a 2s wait timeout. Data collected today shows that even with a much faster kernel we can reasonably expect iptables-restore to take upwards of 2.4 seconds. (with unpatched/released RHEL kernel this can easily take 7-8 second)
> longest runs I saw over about 30 minutes were:
> 2.267244
> 2.284707
> 2.291535
> 2.376457
> If we get 2 iptables restores going at the same time, with a 2s timeout it is very likely the second will fail.
> I'd like to suggest a 5s timeout. It should still bound the number of thread we may be waiting on and increases the reliability that a common situation will be automatically resolved without failing up the stack.
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
fix warning messages due to GetMountRefs func not implemented in windows
**What this PR does / why we need it**:
This PR completes the windows implementation of GetMountRefs in mount.go. In linux, the GetMountRefs implementaion is: read `/proc/mounts` and find all mount points, while in Windows, there is no such `/proc/mounts` place which shows all mounting points.
There is another way in windows, **we could walk through(by `getAllParentLinks` func) the mount path(symbolic link) and get all symlinks until we got the final device, which is actually a drive**.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#54670
This PR fixed the warnning issue mentioned in https://github.com/kubernetes/kubernetes/pull/51252
**Special notes for your reviewer**:
Some values in the code would be like follwoing:
```
GetMountRefs: mountPath ("\\var\\lib\\kubelet\\pods/4c74b128-92ca-11e7-b86b-000d3a36d70c/volumes/kubernetes.io~azure-disk/pvc-1cc91c70-92ca-11e7-b86b-000d3a36d70c")
getAllParentLinks: refs (["" "" "c:\\var\\lib\\kubelet\\plugins\\kubernetes.io\\azure-disk\\mounts\\b1246717734" "G:\\"])
basemountPath c:\var\lib\kubelet\plugins\kubernetes.io\azure-disk\mounts
got volumeID b1246717734
```
**Release note**:
```
fix warning messages due to GetMountRefs func not implemented in windows
```
Automatic merge from submit-queue (batch tested with PRs 54656, 54552, 54389, 53634, 54408). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Adding unit tests to methods of file's util
What this PR does / why we need it:
Add unit tests, thank you!
Automatic merge from submit-queue (batch tested with PRs 54656, 54552, 54389, 53634, 54408). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Adding unit tests to methods of netsh
What this PR does / why we need it:
Add unit tests, thank you!
Automatic merge from submit-queue (batch tested with PRs 53730, 51608, 54459, 54534, 54585). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
RBD Plugin: Implement Attacher/Detacher interfaces.
**What this PR does / why we need it**:
This PR continues @rootfs 's work in #33660. It implements volume.Attacher/Volume.Detacher interfaces to resolve RBD image locking and makes RBD plugin more robust.
Summary of interfaces and what they do for RBD plugin:
- Attacher.Attach(): does nothing
- Attacher.VolumesAreAttached(): method to query volume attach status
- Attacher.GetDeviceMountPath(): method to get device mount path
- Attacher.WaitForAttach(): kubelet maps the image on the node (and lock the image if needed)
- Attacher.MountDevice(): kubelet mounts device at the device mount path
- Detacher.UnmountDevice: kubelet unmounts device from the device mount path (currently, we need to unmaps image from the node here) (and unlock the image if needed)
- Detacher.Detach(): does nothing
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
fixes#50142.
**Special notes for your reviewer**:
RBD changes:
1) Modify rbdPlugin to implement volume.AttachableVolumePlugin interface.
2) Add rbdAttacher/rbdDetacher structs to implement
volume.Attacher/Detacher interfaces.
3) Add mount.SafeFormatAndMount/mount.Exec fields to rbdPlugin, and setup them in
rbdPlugin.Init for later uses. Attacher/Mounter/Unmounter/Detacher
reference rbdPlugin to use mounter and exec. This simplifies
code.
4) Add testcase struct to abstract RBD Plugin test case, etc.
5) Add newRBD constructor to unify rbd struct initialization.
Non-RBD changes:
1) Fix FakeMounter.IsLikelyNotMountPoint to return ErrNotExist if the
directory does not exist. Mounter.IsLikelyNotMountPoint interface
requires this, and RBD plugin depends on it.
2) ~~Extend Detacher.Detach method to pass `*volume.Spec`, RBD plugin
needs it to detach device from the node.~~
3) ~~Extend Volume.Spec struct to include namespace string, RBD Plugin needs
it to locate objects (e.g. secrets) in Pod's namespace.~~
4) ~~Update RABC bootstrap policy to allow
`system:controller:attachdetach-controller` cluster role to get
Secrets object. RBD attach/detach needs to access secrets object in
Pod's namespace.~~
**Release note**:
```
NONE
```
Automatic merge from submit-queue (batch tested with PRs 49865, 53731, 54013, 54513, 51502). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
The DBusFakeConnection should have locks to prevent races
1) Fix FakeMounter.IsLikelyNotMountPoint to return ErrNotExist if the
directory does not exist. Mounter.IsLikelyNotMountPoint interface
requires this, and RBD plugin depends on it.
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Need to validate taint effect when removing taints.
Instead of reporting taint not found, it's better to report user
that the effect is invalid. This will help user to check errors.
So when user tries to remove a taint, two conditions will be checked:
1. Whether or not the effect is an empty string.
2. Whether or not the non-empty effect is a valid taint effect.
**Release note**:
```release-note
None
```
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Fix duplicate unbind action in kube-proxy
**What this PR does / why we need it**:
Fix duplicate unbind action in kube-proxy. It will generate unnecessary error info If unbind multi-ports on one service .
**Which issue this PR fixes**:
fixes#51694
**Release-note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 52520, 52033, 53626, 50478). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Fix kube-proxy to use proper iptables commands for IPv6 operation
For iptables save and restore operations, kube-proxy currently uses
the IPv4 versions of the iptables save and restore utilities
(iptables-save and iptables-restore, respectively). For IPv6 operation,
the IPv6 versions of these utilities need to be used
(ip6tables-save and ip6tables-restore, respectively).
Both this change and PR #48551 are needed to get Kubernetes services
to work in an IPv6-only Kubernetes cluster (along with setting
'--bind-address ::0' on the kube-proxy command line. This change
was alluded to in a discussion on services for issue #1443.
fixes#50474
**What this PR does / why we need it**:
This change modifies kube-proxy so that it uses the proper commands for iptables save and
iptables restore for IPv6 operation. Currently kube-proxy uses 'iptables-save' and 'iptables-restore'
regardless of whether it is being used in IPv4 or IPv6 mode. This change fixes kube-proxy so
that it uses 'ip6tables-save' and 'ip6tables-restore' commands when kube-proxy is being run
in IPv6 mode.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#50474
**Special notes for your reviewer**:
**Release note**:
```release-note NONE
```
pospispa