'kubeadm reset' uses incorrect way of unmounting /var/lib/kubelet
directories. It queries /proc/mounts for /var/lib/kubelet mount point.
If /var/lib/kubelet directory is also mounted it makes 'kubelet reset'
to unmount it too, which is incorrect. It also makes it fail as it
can't unmount /var/lib/kubelet before unmounting mounts inside it.
Fixed by querying /var/lib/kubelet/ instead of /var/lib/kubelet.
This should exclude /var/lib/kubelet from the query results even if
it's mounted.
Fixes: kubernetes/kubeadm#1294
As localApiEndpoint is ignored by json.Unmarshaller this should be
localAPIEndpoint as defined in the json tag of the source code.
Signed-off-by: André Martins <aanm90@gmail.com>
'kubeadm init' silently ignores --node-name and --cri-socket
command line options if --config option is specified.
Implemented setting 'name' and 'criSocket' options from the command
line even if --config command line option is used.
kubeadm config migrate uses AnyConfigFileAndDefaultsToInternal, which can
unmarshal config from file only if InitConfiguration or JoinConfiguration are
present. Even with that in mind, it can only return a singlie config object,
with InitConfiguration taking precendence over JoinConfiguration. Thus, the
following cases were not handled properly, while they were perfectly valid for
kubeadm init/join:
- ClusterConfiguration only file caused kubeadm config migrate to exit with
error.
- Init + Join configurations in the same file caused Init + Cluster
configuration to be produced (ignoring JoinConfiguration). The same is valid
when the combo is Init + Cluster + Join configurations.
- Cluster + Join configuration ignores ClusterConfiguration and only
JoinConfiguration gets migrated.
To fix this, the following is done:
- Introduce MigrateOldConfigFromFile which migrates old config from a file,
while ensuring that all kubeadm originated input config kinds are taken care
of. Add comprehensive unit tests for this.
- Replace the use of AnyConfigFileAndDefaultsToInternal in
kubeadm config migrate with MigrateOldConfigFromFile.
- Remove the no longer used and error prone AnyConfigFileAndDefaultsToInternal.
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
'kubeadm join' silently ignores --node-name and --cri-socket
command line options if --config option is specified.
In some cases it's much easier for users to override these parameters
from the command line instead of updating config, especially for
multi-node automatic deployments where only node name should be changed.
Implemented setting 'name' and 'criSocket' options from the command
line even if --config command line option is used.
Bump MinimumControlPlaneVersion and MinimumKubeletVersion to v1.12 and update
any related tests.
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
Added hostport and host/port parts to the error messages
produced by ParseHostPort API.
This should help users to better identify parsing issues.
Fixes: kubernetes/kubeadm#1159
- make the whole config example actually pass strict verification
(i.e. make the config work with --config)
- add print init-defaults/join defaults
- other small fixes
When 'kubeadm init ...' is used with an IPv6 kubeadm configuration,
kubeadm currently generates an etcd.yaml manifest that uses IP:port
combinatins where the IP is an IPv6 address, but it is not enclosed
in square brackets, e.g.:
- --advertise-client-urls=https://fd00:20::2:2379
For IPv6 advertise addresses, this should be of the form:
- --advertise-client-urls=https://[fd00:20::2]:2379
The lack of brackets around IPv6 addresses in cases like this is
causing failures to bring up IPv6-only clusters with Kubeadm as
described in kubernetes/kubeadm Issues #1212.
This format error is fixed by using net.JoinHostPort() to generate
URLs as shown above.
Fixes kubernetes/kubeadm Issue #1212
ChooseAPIServerBindAddress is silently overriding the requested bind IP
address for the API server if that address is deemed unsuitable. This is
currently done only if the IP is a loopback one (127.0.0.0/8; ::1/128).
It's best to at least issue a warning if such override occurs, so that there
are no surprised users by this.
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
The reason for the bump is the new functionality of the
k8s.io/utils/exec package which allows
- to get a hold of the process' std{out,err} as `io.Reader`s
- to `Start` a process and `Wait` for it
This should help on addressing #70890 by allowing to wrap std{out,err}
of the process to be wrapped with a `io.limitedReader`.
It also updates
- k8s.io/kubernetes/pkg/probe/exec.FakeCmd
- k8s.io/kubernetes/pkg/kubelet/prober.execInContainer
- k8s.io/kubernetes/cmd/kubeadm/app/phases/kubelet.fakeCmd
to implement the changed interface.
The dependency on 'k8s.io/utils/pointer' to the new version has also
been bumped in some staging repos:
- apiserver
- kube-controller-manager
- kube-scheduler
The kubelet allows you to set `--pod-infra-container-image`
(also called `PodSandboxImage` in the kubelet config),
which can be a custom location to the "pause" image in the case
of Docker. Other CRIs are not supported.
Set the CLI flag for the Docker case in flags.go using
WriteKubeletDynamicEnvFile().
Since docker 18.09, the ServerVersion field format changed: the `-ce`
or `-ee` suffix disappeared:
- docker 18.06: `18.06.1-ce`
- docker 18.09: `18.09.0`
This was not expected by the docker_validator version regexp, which
assumed newer docker versions ended with `-[a-z]{2}`.
This made the validator return an error, whereas we expect it to
return only a warning (by recognizing it as a newer but not yet
supported docker version).
This commit relax the version regexp to also recognize `18.09.0`.
The docker validator now returns a warning, as tested.
- Move from the old github.com/golang/glog to k8s.io/klog
- klog as explicit InitFlags() so we add them as necessary
- we update the other repositories that we vendor that made a similar
change from glog to klog
* github.com/kubernetes/repo-infra
* k8s.io/gengo/
* k8s.io/kube-openapi/
* github.com/google/cadvisor
- Entirely remove all references to glog
- Fix some tests by explicit InitFlags in their init() methods
Change-Id: I92db545ff36fcec83afe98f550c9e630098b3135
Up until now UnifiedControlPlaneImage existed as a string value as part of the
ClusterConfiguration. This provided an override for the Kubernetes core
component images with a single custom image. It is mostly used to override the
control plane images with the hyperkube image. This saves both bandwith and
disk space on the control plane nodes.
Unfortunately, this specified an entire image string (complete with its prefix,
image name and tag). This disables upgrades of setups that use hyperkube.
Therefore, to enable upgrades on hyperkube setups and to make configuration
more convenient, the UnifiedControlPlaneImage option is replaced with a boolean
option, called UseHyperKubeImage. If set to true, this option replaces the
image name of any Kubernetes core components with hyperkube, thus allowing for
upgrades and respecting the image repository and version, specified in the
ClusterConfiguration.
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
Create CSR using the mentioned function which also encodes the
type CertificateRequestBlockType.
Without that 'certs renew' is failing with:
'PEM block type must be CERTIFICATE REQUEST'
When node lease feature is enabled, kubelet reports node status to api server
only if there is some change or it didn't report over last report interval.
Added new alpha command to pivot to self hosted
Removed slelfhosting upgrade ability
Added warning message to self hosted pivot
added certs in secrets flag to new selfhosting comand
Until now the control plane timeout was fixed to 4 minutes and users did not
have the ability to change it. This commit allows that timeout to be configured
via the new `timeoutForControlPlane` option in the API server config (itself a
member of the ClusterConfiguration).
The default timeout is still 4 minutes.
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
Writable was added to HostPathMount in v1alpha1 in order to control if an extra
volume is mounted in read only or writable mode.
Usually, in Kubernetes, this option is referred to as ReadOnly, instead of
Writable and is defaulted to `false`. However, at the time, all extra volumes
to pods were defaulted to read-only. Therefore, to avoid changes to existing
v1alpha1 configs, this option had to be added with reversed meaning.
Hence, it's called `writable`.
Now, with the migration towards v1beta1, we can safely change this to ReadOnly
and get it in sync with the reset of Kubernetes.
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
In v1alpha3's, control plane component config options were nested directly into
the ClusterConfiguration structure. This is cluttering the config structure and
makes it hard to maintain. Therefore the control plane config options must be
separated into different substructures in order to graduate the format to beta.
This change does the following:
- Introduces a new structure called ControlPlaneComponent, that contains fields
common to all control plane component types. These are currently extra args
and extra volumes.
- Introduce a new structure called APIServer that contains
ControlPlaneComponent and APIServerCertSANs field (from ClusterConfiguration)
- Replace all API Server, Scheduler and Controller Manager options in
ClusterConfiguration with APIServer, ControllerManager and Scheduler fields
of APIServer and ControlPlaneComponent types.
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
Remove custom flags that were previously available per
sub-phase. Rely on the config passed to 'kubeadm init' for that.
Remove redundant functions in manifests.go.
Move the audit policy settings to the control plane phase (under
API server).
Remove the test based on these points:
- it's apparently flaky by more than one reports and it's hard to debug.
- it's not a CLI unit test.
- it's testing API objects using a fake API server which is a bad hack...
- existing e2e tests already provide coverage for all
the `expectedError: false` cases.
In the past the discovery configuration expected, that we can support multiple
API server endpoints. In practice, we always end up with a single API server
endpoint, because, even in HA setups, we use a load balancer scheme for API
servers.
Therefore, to reduce complexity and improve readability of the config, the
multiple API server endpoints support is removed from the bootstrap token
discovery join method and configuration.
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
Kubernetes Prow Robot