Multiarch manifest for volume-tester docker images

test/images/volume/gluster/BASEIMAGE

@@ -0,0 +1,3 @@
+amd64=fedora:28
+arm64=arm64v8/fedora:28
+ppc64le=ppc64le/fedora:28

test/images/volume/gluster/Dockerfile

@@ -12,7 +12,10 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-FROM fedora:26
+FROM BASEIMAGE
+
+CROSS_BUILD_COPY qemu-QEMUARCH-static /usr/bin/
+
 RUN yum -y install hostname glusterfs-server && yum clean all
 ADD glusterd.vol /etc/glusterfs/
 ADD run_gluster.sh /usr/local/bin/

test/images/volume/gluster/VERSION

@@ -0,0 +1 @@
+1.0

test/images/volume/iscsi/BASEIMAGE

@@ -0,0 +1,3 @@
+amd64=fedora:28
+arm64=arm64v8/fedora:28
+ppc64le=ppc64le/fedora:28

test/images/volume/iscsi/Dockerfile

@@ -12,7 +12,9 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-FROM fedora:26
+FROM BASEIMAGE
+
+CROSS_BUILD_COPY qemu-QEMUARCH-static /usr/bin/
 
 RUN yum install -y iscsi-initiator-utils targetcli net-tools strace procps-ng psmisc && yum clean all
 ADD run_iscsid.sh /usr/local/bin/

test/images/volume/iscsi/README.md

@@ -8,7 +8,7 @@ Inspired by https://github.com/rvykydal/dockerfile-iscsid
 
 * The container needs to run with docker --privileged
 
-block.tar.gz is a small ext2 filesystem created by `make block` (run as root!)
+block.tar.gz is a small ext2 filesystem created by `create_block.sh` (run as root!)
 
 
 [![Analytics](https://kubernetes-site.appspot.com/UA-36037335-10/GitHub/test/images/volumes-tester/iscsi/README.md?pixel)]()

test/images/volume/iscsi/VERSION

@@ -0,0 +1 @@
+1.0

test/images/volume/nfs/BASEIMAGE

@@ -0,0 +1,3 @@
+amd64=centos:7
+arm64=arm64v8/centos:7
+ppc64le=ppc64le/centos:7

test/images/volume/nfs/Dockerfile

@@ -12,7 +12,9 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-FROM centos
+FROM BASEIMAGE
+
+CROSS_BUILD_COPY qemu-QEMUARCH-static /usr/bin/
 RUN yum -y install /usr/bin/ps nfs-utils && yum clean all
 RUN mkdir -p /exports
 ADD run_nfs.sh /usr/local/bin/

test/images/volume/nfs/VERSION

@@ -0,0 +1 @@
+1.0

test/images/volume/rbd/BASEIMAGE

@@ -0,0 +1,3 @@
+amd64=fedora:28
+arm64=arm64v8/fedora:28
+ppc64le=ppc64le/fedora:28

test/images/volume/rbd/Dockerfile

@@ -15,7 +15,9 @@
 # CEPH all in one
 # Based on image by Ricardo Rocha, ricardo@catalyst.net.nz
 
-FROM fedora:26
+FROM BASEIMAGE
+
+CROSS_BUILD_COPY qemu-QEMUARCH-static /usr/bin/
 
 # Base Packages
 RUN yum install -y wget strace psmisc procps-ng ceph ceph-fuse && yum clean all

test/images/volume/rbd/README.md

@@ -0,0 +1,5 @@
+# rbd and ceph target container for testing.
+
+* The container needs to run with docker --privileged
+
+block.tar.gz is a small ext2 filesystem created by `create_block.sh` (run as root!)

test/images/volume/rbd/VERSION

@@ -0,0 +1 @@
+1.0

test/images/volumes-tester/ceph/Dockerfile

@@ -1,25 +0,0 @@
-# Copyright 2016 The Kubernetes Authors.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-FROM centos:6
-
-ADD install.sh /usr/local/bin/
-RUN /usr/local/bin/install.sh 
-ADD init.sh /usr/local/bin/
-ADD index.html /tmp/
-RUN chmod 644 /tmp/index.html
-
-EXPOSE 6789/tcp
-
-ENTRYPOINT ["/usr/local/bin/init.sh"]

test/images/volumes-tester/ceph/Makefile

@@ -1,30 +0,0 @@
-# Copyright 2016 The Kubernetes Authors.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-TAG = 0.1
-PREFIX = gcr.io/kubernetes-e2e-test-images
-
-all: push
-
-container: image
-
-image:
-	docker build --pull -t $(PREFIX)/volume-ceph . # Build new image and automatically tag it as latest
-	docker tag $(PREFIX)/volume-ceph $(PREFIX)/volume-ceph:$(TAG)  # Add the version tag to the latest image
-
-push: image
-	docker push $(PREFIX)/volume-ceph # Push image tagged as latest to repository
-	docker push $(PREFIX)/volume-ceph:$(TAG) # Push version tagged image to repository (since this image is already pushed it will simply create or update version tag)
-
-clean:

test/images/volumes-tester/ceph/README.md

@@ -1,8 +0,0 @@
-# Ceph server container for testing
-
-This container exports ceph fs with an index.html inside.
-
-Used by test/e2e/* to test CephFSVolumeSource. Not for production use!
-
-
-[![Analytics](https://kubernetes-site.appspot.com/UA-36037335-10/GitHub/test/images/volumes-tester/ceph/README.md?pixel)]()

test/images/volumes-tester/ceph/index.html

@@ -1 +0,0 @@
-Hello Ceph!

test/images/volumes-tester/ceph/init.sh

@@ -1,93 +0,0 @@
-#!/usr/bin/env bash
-
-# Copyright 2015 The Kubernetes Authors.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#set -e
-set -x
-
-# clean up
-rm -f /etc/ceph/*
-
-pkill -9 ceph-mon
-pkill -9 ceph-osd
-pkill -9 ceph-mds
-
-mkdir -p /var/lib/ceph
-mkdir -p /var/lib/ceph/osd
-mkdir -p /var/lib/ceph/osd/ceph-0
-
-# create hostname for ceph monitor
-MASTER=`hostname -s`
-
-ip=$(ip -4 -o a | grep eth0 | awk '{print $4}' | cut -d'/' -f1)
-echo "$ip $MASTER" >> /etc/hosts
-
-#create ceph cluster
-ceph-deploy --overwrite-conf new ${MASTER}  
-ceph-deploy --overwrite-conf mon create-initial ${MASTER}
-ceph-deploy --overwrite-conf mon create ${MASTER}
-ceph-deploy  gatherkeys ${MASTER}  
-
-# set osd  params for minimal configuration
-echo "osd crush chooseleaf type = 0" >> /etc/ceph/ceph.conf
-echo "osd journal size = 100" >> /etc/ceph/ceph.conf
-echo "osd pool default size = 1" >> /etc/ceph/ceph.conf
-echo "osd pool default pgp num = 8" >> /etc/ceph/ceph.conf
-echo "osd pool default pg num = 8" >> /etc/ceph/ceph.conf
-
-/sbin/service ceph -c /etc/ceph/ceph.conf stop mon.${MASTER}
-/sbin/service ceph -c /etc/ceph/ceph.conf start mon.${MASTER}
-
-# create ceph osd
-ceph osd create
-ceph-osd -i 0 --mkfs --mkkey
-ceph auth add osd.0 osd 'allow *' mon 'allow rwx' -i /var/lib/ceph/osd/ceph-0/keyring
-ceph osd crush add 0 1 root=default host=${MASTER}
-ceph-osd -i 0 -k /var/lib/ceph/osd/ceph-0/keyring
-
-#see if we are ready to go  
-ceph osd tree  
-
-# create ceph fs
-ceph osd pool create cephfs_data 4
-ceph osd pool create cephfs_metadata 4
-ceph fs new cephfs cephfs_metadata cephfs_data
-ceph-deploy --overwrite-conf mds create ${MASTER}
-
-# uncomment the following for rbd test
-# ceph osd pool create kube 4
-# rbd create foo --size 10 --pool kube
-
-ps -ef |grep ceph
-ceph osd dump
-
-# add new client with a pre defined keyring
-# this keyring must match the ceph secret in e2e test
-cat > /etc/ceph/ceph.client.kube.keyring <<EOF
-[client.kube]
-        key = AQAMgXhVwBCeDhAA9nlPaFyfUSatGD4drFWDvQ==
-        caps mds = "allow rwx"
-        caps mon = "allow rwx"
-        caps osd = "allow rwx"
-EOF
-ceph auth import -i /etc/ceph/ceph.client.kube.keyring
-
-# mount it through ceph-fuse and copy file to ceph fs
-ceph-fuse -m ${MASTER}:6789 /mnt
-cp /tmp/index.html /mnt
-chmod 644 /mnt/index.html
-
-# watch
-ceph -w

test/images/volumes-tester/ceph/install.sh

@@ -1,27 +0,0 @@
-#!/usr/bin/env bash
-
-# Copyright 2015 The Kubernetes Authors.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-yum update -y -v
-yum install   openssh openssh-server openssh-clients hostname -y -q
-
-ssh-keygen -f ~/.ssh/id_rsa -t rsa -N ''
-cat ~/.ssh/id_rsa.pub |awk '{print $1, $2, "Generated"}' >> ~/.ssh/authorized_keys2
-cat ~/.ssh/id_rsa.pub |awk '{print $1, $2, "Generated"}' >> ~/.ssh/authorized_keys
-
-rpm -Uvh http://ceph.com/rpm/rhel6/noarch/ceph-release-1-0.el6.noarch.rpm
-yum install  -y -q python-itsdangerous python-werkzeug python-jinja2 python-flask ceph-deploy epel-release
-# ceph pkg depends on epel-release
-yum install -y -q  ceph ceph-fuse

test/images/volumes-tester/gluster/Makefile

@@ -1,30 +0,0 @@
-# Copyright 2016 The Kubernetes Authors.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-TAG = 0.5
-PREFIX = gcr.io/kubernetes-e2e-test-images
-
-all: push
-
-container: image
-
-image:
-	docker build --pull -t $(PREFIX)/volume-gluster . # Build new image and automatically tag it as latest
-	docker tag $(PREFIX)/volume-gluster $(PREFIX)/volume-gluster:$(TAG)  # Add the version tag to the latest image
-
-push: image
-	docker push $(PREFIX)/volume-gluster # Push image tagged as latest to repository
-	docker push $(PREFIX)/volume-gluster:$(TAG) # Push version tagged image to repository (since this image is already pushed it will simply create or update version tag)
-
-clean:

test/images/volumes-tester/iscsi/Makefile

@@ -1,41 +0,0 @@
-# Copyright 2016 The Kubernetes Authors.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-TAG = 0.2
-PREFIX = gcr.io/kubernetes-e2e-test-images
-
-all: push
-
-container: image
-
-image:
-	# Build new image and automatically tag it as latest
-	docker build --pull -t $(PREFIX)/volume-iscsi .
-	# Add the version tag to the latest image
-	docker tag $(PREFIX)/volume-iscsi $(PREFIX)/volume-iscsi:$(TAG)
-
-block:
-	# Create block.tar.gz with ext2 block device with index.html inside.
-	# block.tar.gz is already available in git and users don't need to
-	# regenerate it, this target is here just for reference.
-	# Run as root!
-	./create_block.sh
-
-push: image
-	# Push image tagged as latest to repository
-	docker push $(PREFIX)/volume-iscsi
-	# Push version tagged image to repository (since this image is already pushed it will simply create or update version tag)
-	docker push $(PREFIX)/volume-iscsi:$(TAG)
-
-clean:

test/images/volumes-tester/nfs/Makefile

@@ -1,30 +0,0 @@
-# Copyright 2016 The Kubernetes Authors.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-TAG = 0.8
-PREFIX = gcr.io/kubernetes-e2e-test-images
-
-all: push
-
-container: image
-
-image:
-	docker build --pull -t $(PREFIX)/volume-nfs . # Build new image and automatically tag it as latest
-	docker tag $(PREFIX)/volume-nfs $(PREFIX)/volume-nfs:$(TAG) # Add the version tag to the latest image
-
-push: image
-	docker push $(PREFIX)/volume-nfs # Push image tagged as latest to repository
-	docker push $(PREFIX)/volume-nfs:$(TAG) # Push version tagged image to repository (since this image is already pushed it will simply create or update version tag)
-
-clean:

test/images/volumes-tester/rbd/Makefile

@@ -1,41 +0,0 @@
-# Copyright 2016 The Kubernetes Authors.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-TAG = 0.2
-PREFIX = gcr.io/kubernetes-e2e-test-images
-
-all: push
-
-container: image
-
-image:
-	# Build new image and automatically tag it as latest
-	docker build --pull -t $(PREFIX)/volume-rbd .
-	# Add the version tag to the latest image
-	docker tag $(PREFIX)/volume-rbd $(PREFIX)/volume-rbd:$(TAG)
-
-block:
-	# Create block.tar.gz with ext2 block device with index.html inside.
-	# block.tar.gz is already available in git and users don't need to
-	# regenerate it, this target is here just for reference.
-	# Run as root!
-	./create_block.sh
-
-push: image
-	# Push image tagged as latest to repository
-	docker push $(PREFIX)/volume-rbd
-	# Push version tagged image to repository (since this image is already pushed it will simply create or update version tag)
-	docker push $(PREFIX)/volume-rbd:$(TAG)
-
-clean:

test/utils/image/manifest.go

@@ -88,10 +88,10 @@ var (
 	ResourceController  = ImageConfig{e2eRegistry, "resource-consumer/controller", "1.0", false}
 	ServeHostname       = ImageConfig{e2eRegistry, "serve-hostname", "1.1", false}
 	TestWebserver       = ImageConfig{e2eRegistry, "test-webserver", "1.0", false}
-	VolumeNFSServer     = ImageConfig{e2eRegistry, "volume-nfs", "0.8", false}
+	VolumeNFSServer     = ImageConfig{e2eRegistry, "volume/nfs", "1.0", false}
-	VolumeISCSIServer   = ImageConfig{e2eRegistry, "volume-iscsi", "0.2", false}
+	VolumeISCSIServer   = ImageConfig{e2eRegistry, "volume/iscsi", "1.0", false}
-	VolumeGlusterServer = ImageConfig{e2eRegistry, "volume-gluster", "0.5", false}
+	VolumeGlusterServer = ImageConfig{e2eRegistry, "volume/gluster", "1.0", false}
-	VolumeRBDServer     = ImageConfig{e2eRegistry, "volume-rbd", "0.2", false}
+	VolumeRBDServer     = ImageConfig{e2eRegistry, "volume/rbd", "1.0", false}
 )
 
 func GetE2EImage(image ImageConfig) string {