otherwise years present in the freshly contributed by Dan apache regexes do not match
although should have. I had also to adjust failing now vsftpd test
* 'dovecot' of https://github.com/grooverdan/fail2ban:
ENH: remove non-capturing groups for readibility
BF: fix dovecot filter for when no TLS is enabled on pop/imap
Conflicts:
ChangeLog -- changelog entries. Also untabified few other spots
* 'exim' of https://github.com/grooverdan/fail2ban:
DOC: credits/blame to me for changes to exim
ENH: new exim filter regexs. Also note a begining PID in this format. Thanks to ftoppi for the log entries
TST/ENH: Improve regex around exim
otherwise it
1. 'interferes' with meaninful output of the client
2. if ERROR is logged it better go to stderr and separating ERROR from other levels is not that transparent with python's logging
* commit '0.8.10-31-g1ab0f0f': (24 commits)
BF/ENH: Incorrect authentication data doesn't need tailier so that's optional. Also gained log entry for Unrouteable address
ENH: readibility thanks to Yaroslav
DOC: Changelog for fail2ban-regex RF
DOC: Changelog for asterisk hardening
ENH: fail2ban-regex -- add specification of loglevels to enable
RF: reworked -regex cmdline tool to use optparse, some unification and enhancement of outputs
ENH: 'heavydebug' level == 5 for even more debugging in tricky cases
ENH: asterisk -- use \S instead of [^:] + prefix failregex with ^\[
BF: missed a space
BF: [SSL-out] is optional in assp
ENH: regex hardening on assp
ENH: anchor a bit mor. Use \d and \w where possible. Escape a literal .
TST: attempts at injection with username=rhost=1.2.3.4 have no user= logged in dovecot-1.2.15
ENH: proftpd chan accept usernames with spaces
ENH: injection of fail data into USER field
ENH: dovecot regexs rewritten and extra failures
ENH: proftp regex hardening and log messages
ENH/BF: exim improvements with sample
BF: fix to proxy port in 3proxy example
ENH: sample log + more specific regex
...
Conflicts: -- it was a messy merge/resolution.
ChangeLog
bin/fail2ban-regex
fail2ban-testcases
fail2ban/server/filter.py
* 'master' of https://github.com/yarikoptic/fail2ban:
DOC: Changelog for fail2ban-regex RF
ENH: fail2ban-regex -- add specification of loglevels to enable
RF: reworked -regex cmdline tool to use optparse, some unification and enhancement of outputs
ENH: 'heavydebug' level == 5 for even more debugging in tricky cases
Conflicts:
ChangeLog
* '3proxy' of https://github.com/grooverdan/fail2ban:
BF: fix to proxy port in 3proxy example
ENH: sample log + more specific regex
BF: authentication errors end in 01-09 but the beginning part indicates the service as per https://github.com/fail2ban/fail2ban/issues/246#issuecomment-19327955 thanks to ykimon
BF: need to anchor the start to avoid another repeat of DoS injection like Apache
ENH: stricter regex thanks to Steven Hiscocks (kwirk)
DOC: credits
Conflicts:
ChangeLog
* 'exim' of https://github.com/grooverdan/fail2ban:
BF/ENH: Incorrect authentication data doesn't need tailier so that's optional. Also gained log entry for Unrouteable address
ENH: readibility thanks to Yaroslav
ENH/BF: exim improvements with sample
Conflicts:
ChangeLog
* 'proftpd' of https://github.com/grooverdan/fail2ban:
ENH: proftpd chan accept usernames with spaces
ENH: injection of fail data into USER field
ENH: proftp regex hardening and log messages
Conflicts:
ChangeLog
* 'dovecot' of https://github.com/grooverdan/fail2ban:
TST: attempts at injection with username=rhost=1.2.3.4 have no user= logged in dovecot-1.2.15
ENH: dovecot regexs rewritten and extra failures
Conflicts:
ChangeLog -- merged entries
* 'assp' of https://github.com/grooverdan/fail2ban:
BF: missed a space
BF: [SSL-out] is optional in assp
ENH: regex hardening on assp
Conflicts:
ChangeLog -- merged the two entries into 1
* commit '0.8.10-1-g460e09a':
it was not the end of the world and we should continue
DOC: add information on where to report vulnerabilities + pointer to HOWTO_Seek_Help
Changes for 0.8.10 release (changelog, version, etc)
BF: anchor apache- filters. Close#248
DOC: credits for gh-244
Filter Asterisk: Add sample log entry to testcase.
Filter Asterisk: Add AUTH_UNKNOWN_DOMAIN error to list
ENH: purge a few more .*
DOC: credits
DOC: how to do filter enhancements
TST: normalize logs to use example.com and 1.2.3.4 as IP
ENH/BF: constrain regex. Fix ACL error regex
ENH: port optional
Update asterisk
Update asterisk.conf
Conflicts:
ChangeLog
DEVELOP
README.md
fail2ban/version.py
originally following command was used to add header to all config files:
sed -ie '/# Author/ i\# Please report vulnerabilities to fail2ban-vulnerabilities at lists dot sourceforge dot net\n# and see http://www.fail2ban.org/wiki/index.php/HOWTO_Seek_Help for generic bug-reports.\n#' action.d/* filter.d/*
but it would be overkill ATM causing havoc in user-tuned configs -- postponed for now
Also adjusted the release date for today (by mistake in 1 commit ... sorry)
* commit '0.8.9-13-g39d32e0':
Changelog for previous PR
DOC: Changelog entry fro preceeding merge from Terence
TST: Fix fail2ban.conf reader test for unreliable dictionary order
failregex when roundcube log driver is set to 'syslog'
fixed failregex line for roundcube 0.9+
TST: test all stock jails to have actions and correctly specifying blocktype
CFG: assure actions for all the jails
BF: blocktype must be defined within [Init] -- adding [Init] section. Close#232
ENH: since it seems the default is to use file based logging, $syslog is in Should-{Start|Stop} like Debian https://github.com/fail2ban/fail2ban/blob/debian/debian/fail2ban.init
ENH: opensuse script from opensuse: https://build.opensuse.org/package/view_file?expand=1&file=fail2ban.init&package=fail2ban&project=openSUSE%3AFactory
Conflicts:
ChangeLog
config/jail.conf
testcases/clientreadertestcase.py -- had to "git show XXX | patch -p2" under tests/ 2 commits: 8a57ffd7a4db4b
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iEYEABECAAYFAlGRBZ8ACgkQjRFFY3XAJMhqzwCgvUsrv6cSjo1d8YCQUA8Na0Kk
44QAoKk7X2sqFM+wvj2vK3stsHa/80qm
=iBfR
-----END PGP SIGNATURE-----
Merge tag '0.8.9' into 0.9 (quite a bit of conflicts "resolved")
Release 0.8.9
* tag '0.8.9':
BF: add missing files to MANIFEST (I think we shoult not rely on sdist anyways -- 'git tag' tarballs are more thorough ;) )
All the (version) updates for the release of 0.8.9
BF: (travis) relax the test for needed to be presented installed directories -- allow new
BF: (travis) if tests ran under coverage -- there is a traceback parts to report (thus > would be present)
ENH: also print the failing traceback line in case of failure
ENH: include explicit list of new files which should not be there upon "install --root"
ENH: now we know that logging handlers closing was still buggy in 2.6.2
ENH: issue a warning if jail name is longer than 19 symbols (Close#222)
DOC: inline commends with ';' are in effect only if ';' follows as space
BF: Fix for filterpoll incorrectly checking for jailless state
ENH: strengthen detection of working pyinotify
ENH: use the same python executable for setup.py test
ENH: actually tune up TraceBack to determine "unittest" portions of the stack across all python releases
TST: Some primarily smoke tests for tests utils
TST: cover few more lines in fail2banreader.py
ENH: basic test for setup.py itself (when applicable, should greatly improve coverage ;) )
ENH: consistent operation of formatExceptionInfo + unittest for it
ENH: point to the status of master branch on travis
Conflicts:
ChangeLog
MANIFEST
README.md
fail2ban/version.py -- all of the above obvious version changes
below files primarily needed just a bit of help in resolution
config/jail.conf
fail2ban/server/filterpoll.py
fail2ban/server/server.py
fail2ban/tests/servertestcase.py
and following were more difficult -- git wasn't able to track renames/moves of the code
fail2ban-testcases -- needed to introduce those changes to tests/utils.py
testcases/clientreadertestcase.py -- manually applied patch from master
testcases/utils.py -- manually applied patch from master
* master:
Previous coverage was 56% (without disregarding any pragma)
Changelog for preceeding commit
ENH: strip CR and LF while analyzing the lines (processLine) (Close#202)
Conflicts:
fail2ban/server/filter.py
* master: (51 commits)
ENH: Use real (resolving) example.com instead of test.example.com
DOC: Slight tune ups to ChangeLog -- we must release!
Changelog entries for the latest merges
BF: add bash-completion to MANIFEST
DOC: ChangeLog for default action type change
ENH: consolidate where blocktype is defined for iptables rules
BF: default type to unreachable
ENH: separate out regex and escape a .
ENH: logs/sshd -- have ":" after [daemon] (other uses are uncommon)
ENH: logs/sshd -- use example.com as the resolved hostname in sample log lines
ENH: filter.d/sshd.conf -- allow for trailing "via IP" in logs
DOC: Drop sudo from bash-completion
DOC: Added bash-completion script
ENH: add blocktype to all relevant actions. Also default the rejection to a ICMP reject rather than a drop
ENH: Removed unused log line
ENH: logrotate file
BF: missed MANIFEST include
BF: missed MANIFEST include
BF: missed MANIFEST include
ENH: some form of logrotate based on what distros are doing
...
Conflicts:
ChangeLog
MANIFEST
client/actionreader.py
config/jail.conf
fail2ban/server/datedetector.py
fail2ban/tests/datedetectortestcase.py
* 'bsd_logs' of https://github.com/grooverdan/fail2ban:
ENH: separate out regex and escape a .
BF: missed MANIFEST include
DOC: credits for bsd log
DOC: bsd syslog files thanks to Nick Hilliard
BF: change common.conf to handle formats of syslog -v and syslog -vv in BSD
Conflicts:
config/filter.d/common.conf
Origin: https://github.com/lenrico/fail2ban
Squashing was done via rebase -i 1524b076d6
to eliminate massive assp sample log file originally added
fixed test date thx to steven
tight control of the filter for ASSP
as yaroslav wishes
as daniel desires
changed from DateASSPlike class to DateStrptime
fixed little things
added new date format support for ASSP SMTP Proxy
* master:
ENH: "is None" instead of "== None" + tune ups in headers
BF: log error only if there were missed config files that couldn't be read
DOC: missing cinfo tags are ok. Log error for self referencing definitions
DOC: s/defination/definition/g learn to spell
Changelog entry for the previous commit and some untabify
BF: pyinotify backend should also handle IN_MOVED_TO events
ENH: remove stats of config files and use results of SafeConfigParserWithIncludes.read to facilitate meaningful error messages
DOC: credits for gh-70 fix
BF: ensure dates in email are in the C locale. Thanks iGeorgeX
DOC: ChangeLog for recursive tag substition
ENH: allow recursive tag substitution in action files.
DOC: document <br> tag
DOC: ChangeLog for named-refused entry
ENH: Account for views in named filter. By Romain Riviere in gentoo bug #259458
DOC: release documentation and distributor contacts
DOC: changelog entry for enhanced ssh filter
BF: Rename mentioning of README to README.md (Fixes#187)
updated README.md to hyperlink, add travis and coversall
Moving README into a markup README.md for github's goodnesses
Conflicts:
DEVELOP
README.md
fail2ban/client/configreader.py
fail2ban/server/datedetector.py
* 'master' of git://github.com/fail2ban/fail2ban:
BF: log error only if there were missed config files that couldn't be read
DOC: missing cinfo tags are ok. Log error for self referencing definitions
DOC: s/defination/definition/g learn to spell
ENH: remove stats of config files and use results of SafeConfigParserWithIncludes.read to facilitate meaningful error messages
DOC: ChangeLog for recursive tag substition
ENH: allow recursive tag substitution in action files.
* commit '0.8.8-212-gf6f30f1': (24 commits)
DOC: tune up formatting (spaces) and prelude for the changelog entry
DOC: more ChangeLog entries all the way back to 0.8.8
DOC: move new actions and filters to New Features in ChangeLog
DOC: tomcat and Guacmole are next release
DOC: credit man page edits
DOC: developers please rebase and use a single commit
DOC: post release ChangeLog entry
DOC: ChangeLog - current HEAD back to ce3ab34
DOC: begining of ChangeLog
DOC: version/date of release
DOC: ChangeLog versions and dates for Releasing
DOC: guidance for pull requests
BF: filter.d/sshd "Did not receive identification string" relates to an exploit so document this in sshd-ddos.conf but leave it out of authentication based blocks in sshd.conf
DOC: a plugin to thanks for the community support
Add After, PIDFile, and change WantedBy to multi-user.target in fail2ban.server
DOC: slight tune ups to README (we are no longer compatible with python 2.3 ;) )
ENH: more openssh fail messages from openssh source code (CVS 20121205)
Add systemd unit file and tmpfiles.d configuration files
BF: do not rely on scripts being under /usr -- might differ eg on Fedora -- rely on import of common.version (Closes gh-112)
RF: move exceptions used by both client and server into common/exceptions.py
...
Conflicts:
ChangeLog
README
* master:
DOC: initiated changelog (but not juice left to actually fill it up ;-))
TST: test all valid loglevels in server testcases
TST: Add tag replace and escape test for actions
ENH: Minor change to action for consistency of execStart/Stop
TST: Coverage for coveralls.io should only be run on success
TST: no cover additions to server, primarily daemon creation
DOC: thanks @kwirk for spotting the typos in exception message
FD_CLOEXEC support
Typo in default pidfile in fail2ban.conf
Conflicts:
.travis.yml -- after_success
ChangeLog -- added perspective changelog for 0.8.9
fail2ban/server/asyncserver.py -- imports
fail2ban/server/server.py -- no pragma (if I got it right ;-) )
Daniel Black