## 1.17.3 (February 13, 2024) SECURITY: * mesh: Update Envoy versions to 1.27.3 and 1.26.7 to address [CVE-2024-23324](https://github.com/envoyproxy/envoy/security/advisories/GHSA-gq3v-vvhj-96j6), [CVE-2024-23325](https://github.com/envoyproxy/envoy/security/advisories/GHSA-5m7c-mrwr-pm26), [CVE-2024-23322](https://github.com/envoyproxy/envoy/security/advisories/GHSA-6p83-mfmh-qv38), [CVE-2024-23323](https://github.com/envoyproxy/envoy/security/advisories/GHSA-x278-4w4x-r7ch), [CVE-2024-23327](https://github.com/envoyproxy/envoy/security/advisories/GHSA-4h5x-x9vh-m29j), and [CVE-2023-44487](https://github.com/envoyproxy/envoy/security/advisories/GHSA-jhv4-f7mr-xx76) [[GH-20587](https://github.com/hashicorp/consul/issues/20587)] FEATURES: * cli: Adds new command `exported-services` to list all services exported and their consumers. Refer to the [CLI docs](https://developer.hashicorp.com/consul/commands/exported-services) for more information. [[GH-20331](https://github.com/hashicorp/consul/issues/20331)] IMPROVEMENTS: * ProxyCfg: avoid setting a watch on `Internal.ServiceDump` when mesh gateway is not used. [[GH-20168](https://github.com/hashicorp/consul/issues/20168)] * ProxyCfg: only return the nodes list when querying the `Internal.ServiceDump` watch from proxycfg [[GH-20168](https://github.com/hashicorp/consul/issues/20168)] * Upgrade to use Go 1.21.7. [[GH-20545](https://github.com/hashicorp/consul/issues/20545)] * api: add a new api(/v1/exported-services) to list all the exported service and their consumers. [[GH-20015](https://github.com/hashicorp/consul/issues/20015)] * connect: Add `CaseInsensitive` flag to service-routers that allows paths and path prefixes to ignore URL upper and lower casing. [[GH-19647](https://github.com/hashicorp/consul/issues/19647)] BUG FIXES: * audit-logs: **(Enterprise Only)** Fixes non ASCII characters in audit logs because of gzip. [[GH-20345](https://github.com/hashicorp/consul/issues/20345)] * connect: Fix issue where re-persisting existing proxy-defaults using `http` protocol fails with a protocol-mismatch error. [[GH-20481](https://github.com/hashicorp/consul/issues/20481)] * connect: Fix regression with SAN matching on terminating gateways [GH-20360](https://github.com/hashicorp/consul/issues/20360) [[GH-20417](https://github.com/hashicorp/consul/issues/20417)] * connect: Remove code coupling where the xDS capacity controller could negatively affect raft autopilot performance. [[GH-20511](https://github.com/hashicorp/consul/issues/20511)] * logging: add /api prefix to v2 resource endpoint logs [[GH-20352](https://github.com/hashicorp/consul/issues/20352)] * mesh: Fix bug where envoy extensions could not be configured with "permissive" mTLS mode. Note that envoy extensions currently do not apply to non-mTLS traffic in permissive mode. [[GH-20406](https://github.com/hashicorp/consul/issues/20406)] ## 1.17.2 (January 23, 2024) KNOWN ISSUES: * connect: Consul versions 1.17.2 and 1.16.5 perform excessively strict TLS SAN verification on terminating gateways, which prevents connections outside of the mesh to upstream services. Terminating gateway users are advised to avoid deploying these Consul versions. A fix will be present in a future release of Consul 1.17.3 and 1.16.6. [[GH-20360](https://github.com/hashicorp/consul/issues/20360)] SECURITY: * Upgrade OpenShift container images to use `ubi9-minimal:9.3` as the base image. [[GH-20014](https://github.com/hashicorp/consul/issues/20014)] IMPROVEMENTS: * connect: Remove usage of deprecated Envoy field `match_subject_alt_names` in favor of `match_typed_subject_alt_names`. [[GH-19954](https://github.com/hashicorp/consul/issues/19954)] * connect: replace usage of deprecated Envoy field `envoy.config.router.v3.WeightedCluster.total_weight`. [[GH-20011](https://github.com/hashicorp/consul/issues/20011)] * xds: Replace usage of deprecated Envoy field `envoy.config.cluster.v3.Cluster.http_protocol_options` [[GH-20010](https://github.com/hashicorp/consul/issues/20010)] * xds: remove usages of deprecated Envoy fields: `envoy.config.cluster.v3.Cluster.http2_protocol_options`, `envoy.config.bootstrap.v3.Admin.access_log_path` [[GH-19940](https://github.com/hashicorp/consul/issues/19940)] * xds: replace usage of deprecated Envoy field `envoy.extensions.filters.http.lua.v3.Lua.inline_code` [[GH-20012](https://github.com/hashicorp/consul/issues/20012)] DEPRECATIONS: * cli: Deprecate the `-admin-access-log-path` flag from `consul connect envoy` command in favor of: `-admin-access-log-config`. [[GH-19943](https://github.com/hashicorp/consul/issues/19943)] BUG FIXES: * prepared-query: (Enterprise-only) Fix issue where sameness-group failover targets to peers would attempt to query data from the default partition, rather than the sameness-group's partition always. * ui: update token list on Role details page to show only linked tokens [[GH-19912](https://github.com/hashicorp/consul/issues/19912)] ## 1.17.1 (December 12, 2023) SECURITY: * Update `github.com/golang-jwt/jwt/v4` to v4.5.0 to address [PRISMA-2022-0270](https://github.com/golang-jwt/jwt/issues/258). [[GH-19705](https://github.com/hashicorp/consul/issues/19705)] * Upgrade to use Go 1.20.12. This resolves CVEs [CVE-2023-45283](https://nvd.nist.gov/vuln/detail/CVE-2023-45283): (`path/filepath`) recognize \??\ as a Root Local Device path prefix (Windows) [CVE-2023-45284](https://nvd.nist.gov/vuln/detail/CVE-2023-45285): recognize device names with trailing spaces and superscripts (Windows) [CVE-2023-39326](https://nvd.nist.gov/vuln/detail/CVE-2023-39326): (`net/http`) limit chunked data overhead [CVE-2023-45285](https://nvd.nist.gov/vuln/detail/CVE-2023-45285): (`cmd/go`) go get may unexpectedly fallback to insecure git [[GH-19840](https://github.com/hashicorp/consul/issues/19840)] * connect: update supported envoy versions to 1.24.12, 1.25.11, 1.26.6, 1.27.2 to address [CVE-2023-44487](https://github.com/envoyproxy/envoy/security/advisories/GHSA-jhv4-f7mr-xx76) [[GH-19274](https://github.com/hashicorp/consul/issues/19274)] FEATURES: * acl: Adds nomad client templated policy [[GH-19827](https://github.com/hashicorp/consul/issues/19827)] * cli: Adds new subcommand `peering exported-services` to list services exported to a peer . Refer to the [CLI docs](https://developer.hashicorp.com/consul/commands/peering) for more information. [[GH-19821](https://github.com/hashicorp/consul/issues/19821)] IMPROVEMENTS: * mesh: parse the proxy-defaults protocol when write the config-entry to avoid parsing it when compiling the discovery chain. [[GH-19829](https://github.com/hashicorp/consul/issues/19829)] * wan-federation: use a hash to diff config entries when replicating in the secondary DC to avoid unnecessary writes.. [[GH-19795](https://github.com/hashicorp/consul/issues/19795)] * Replaces UI Side Nav with Helios Design System Side Nav. Adds dc/partition/namespace searching in Side Nav. [[GH-19342](https://github.com/hashicorp/consul/issues/19342)] * acl: add api-gateway templated policy [[GH-19728](https://github.com/hashicorp/consul/issues/19728)] * acl: add templated policy descriptions [[GH-19735](https://github.com/hashicorp/consul/issues/19735)] * api: Add support for listing ACL tokens by service name when using templated policies. [[GH-19666](https://github.com/hashicorp/consul/issues/19666)] * cli: stop simultaneous usage of -templated-policy and -templated-policy-file when creating a role or token. [[GH-19389](https://github.com/hashicorp/consul/issues/19389)] * cloud: push additional server TLS metadata to HCP [[GH-19682](https://github.com/hashicorp/consul/issues/19682)] * connect: Default `stats_flush_interval` to 60 seconds when using the Consul Telemetry Collector, unless custom stats sink are present or an explicit flush interval is configured. [[GH-19663](https://github.com/hashicorp/consul/issues/19663)] * metrics: increment consul.client.rpc.failed if RPC fails because no servers are accessible [[GH-19721](https://github.com/hashicorp/consul/issues/19721)] * metrics: modify consul.client.rpc metric to exclude internal retries for consistency with consul.client.rpc.exceeded and consul.client.rpc.failed [[GH-19721](https://github.com/hashicorp/consul/issues/19721)] * ui: move nspace and partitions requests into their selector menus [[GH-19594](https://github.com/hashicorp/consul/issues/19594)] BUG FIXES: * CLI: fix a panic when deleting a non existing policy by name. [[GH-19679](https://github.com/hashicorp/consul/issues/19679)] * Mesh Gateways: Fix a bug where replicated and peered mesh gateways with hostname-based WAN addresses fail to initialize. [[GH-19268](https://github.com/hashicorp/consul/issues/19268)] * ca: Fix bug with Vault CA provider where renewing a retracted token would cause retries in a tight loop, degrading performance. [[GH-19285](https://github.com/hashicorp/consul/issues/19285)] * ca: Fix bug with Vault CA provider where token renewal goroutines could leak if CA failed to initialize. [[GH-19285](https://github.com/hashicorp/consul/issues/19285)] * connect: Solves an issue where two upstream services with the same name in different namespaces were not getting routed to correctly by API Gateways. [[GH-19860](https://github.com/hashicorp/consul/issues/19860)] * federation: **(Enterprise Only)** Fixed an issue where namespace reconciliation could result into the secondary having dangling instances of namespaces marked for deletion * ui: clear peer on home logo link [[GH-19549](https://github.com/hashicorp/consul/issues/19549)] * ui: fix being able to view peered services from non-default namnespaces [[GH-19586](https://github.com/hashicorp/consul/issues/19586)] * ui: stop manually reconciling services if peering is enabled [[GH-19907](https://github.com/hashicorp/consul/issues/19907)] * wan-federation: Fix a bug where servers wan-federated through mesh-gateways could crash due to overlapping LAN IP addresses. [[GH-19503](https://github.com/hashicorp/consul/issues/19503)] * xds: Add configurable `xds_fetch_timeout_ms` option to proxy registrations that allows users to prevent endpoints from dropping when they have proxies with a large number of upstreams. [[GH-19871](https://github.com/hashicorp/consul/issues/19871)] * xds: ensure child resources are re-sent to Envoy when the parent is updated even if the child already has pending updates. [[GH-19866](https://github.com/hashicorp/consul/issues/19866)] ## 1.17.0 (October 31, 2023) BREAKING CHANGES: * api: RaftLeaderTransfer now requires an id string. An empty string can be specified to keep the old behavior. [[GH-17107](https://github.com/hashicorp/consul/issues/17107)] * audit-logging: **(Enterprise only)** allowing timestamp based filename only on rotation. initially the filename will be just file.json [[GH-18668](https://github.com/hashicorp/consul/issues/18668)] DEPRECATIONS: * cli: Deprecate the `-admin-access-log-path` flag from `consul connect envoy` command in favor of: `-admin-access-log-config`. [[GH-15946](https://github.com/hashicorp/consul/issues/15946)] SECURITY: * Update `golang.org/x/net` to v0.17.0 to address [CVE-2023-39325](https://nvd.nist.gov/vuln/detail/CVE-2023-39325) / [CVE-2023-44487](https://nvd.nist.gov/vuln/detail/CVE-2023-44487)(`x/net/http2`). [[GH-19225](https://github.com/hashicorp/consul/issues/19225)] * Upgrade Go to 1.20.10. This resolves vulnerability [CVE-2023-39325](https://nvd.nist.gov/vuln/detail/CVE-2023-39325) / [CVE-2023-44487](https://nvd.nist.gov/vuln/detail/CVE-2023-44487)(`net/http`). [[GH-19225](https://github.com/hashicorp/consul/issues/19225)] * Upgrade `google.golang.org/grpc` to 1.56.3. This resolves vulnerability [CVE-2023-44487](https://nvd.nist.gov/vuln/detail/CVE-2023-44487). [[GH-19414](https://github.com/hashicorp/consul/issues/19414)] * connect: update supported envoy versions to 1.24.12, 1.25.11, 1.26.6, 1.27.2 to address [CVE-2023-44487](https://github.com/envoyproxy/envoy/security/advisories/GHSA-jhv4-f7mr-xx76) [[GH-19275](https://github.com/hashicorp/consul/issues/19275)] FEATURE PREVIEW: **Catalog v2** This release provides the ability to preview Consul's v2 Catalog and Resource API if enabled. The new model supports multi-port application deployments with only a single Envoy proxy. Note that the v1 and v2 catalogs are not cross compatible, and not all Consul features are available within this v2 feature preview. See the [v2 Catalog and Resource API documentation](https://developer.hashicorp.com/consul/docs/architecture/v2) for more information. The v2 Catalog and Resources API should be considered a feature preview within this release and should not be used in production environments. Limitations * The v2 catalog API feature preview does not support connections with client agents. As a result, it is only available for Kubernetes deployments, which use [Consul dataplanes](consul/docs/connect/dataplane) instead of client agents. * The v1 and v2 catalog APIs cannot run concurrently. * The Consul UI does not support multi-port services or the v2 catalog API in this release. * HCP Consul does not support multi-port services or the v2 catalog API in this release. Significant Pull Requests * [[Catalog resource controllers]](https://github.com/hashicorp/consul/tree/e6b724d06249d3e62cd75afe3ee6042ba1fd5415/internal/catalog/internal/controllers) * [[Mesh resource controllers]](https://github.com/hashicorp/consul/tree/e6b724d06249d3e62cd75afe3ee6042ba1fd5415/internal/mesh/internal/controllers) * [[Auth resource controllers]](https://github.com/hashicorp/consul/tree/e6b724d06249d3e62cd75afe3ee6042ba1fd5415/internal/auth/internal) * [[V2 Protobufs]](https://github.com/hashicorp/consul/tree/e6b724d06249d3e62cd75afe3ee6042ba1fd5415/proto-public) FEATURES: * Support custom watches on the Consul Controller framework. [[GH-18439](https://github.com/hashicorp/consul/issues/18439)] * Windows: support consul connect envoy command on Windows [[GH-17694](https://github.com/hashicorp/consul/issues/17694)] * acl: Add BindRule support for templated policies. Add new BindType: templated-policy and BindVar field for templated policy variables. [[GH-18719](https://github.com/hashicorp/consul/issues/18719)] * acl: Add new `acl.tokens.dns` config field which specifies the token used implicitly during dns checks. [[GH-17936](https://github.com/hashicorp/consul/issues/17936)] * acl: Added ACL Templated policies to simplify getting the right ACL token. [[GH-18708](https://github.com/hashicorp/consul/issues/18708)] * acl: Adds a new ACL rule for workload identities [[GH-18769](https://github.com/hashicorp/consul/issues/18769)] * acl: Adds workload identity templated policy [[GH-19077](https://github.com/hashicorp/consul/issues/19077)] * api-gateway: Add support for response header modifiers on http-route configuration entry [[GH-18646](https://github.com/hashicorp/consul/issues/18646)] * api-gateway: add retry and timeout filters [[GH-18324](https://github.com/hashicorp/consul/issues/18324)] * cli: Add `bind-var` flag to `consul acl binding-rule` for templated policy variables. [[GH-18719](https://github.com/hashicorp/consul/issues/18719)] * cli: Add `consul acl templated-policy` commands to read, list and preview templated policies. [[GH-18816](https://github.com/hashicorp/consul/issues/18816)] * config-entry(api-gateway): (Enterprise only) Add GatewayPolicy to APIGateway Config Entry listeners * config-entry(api-gateway): (Enterprise only) Add JWTFilter to HTTPRoute Filters * dataplane: Allow getting bootstrap parameters when using V2 APIs [[GH-18504](https://github.com/hashicorp/consul/issues/18504)] * gateway: **(Enterprise only)** Add JWT authentication and authorization to APIGateway Listeners and HTTPRoutes. * mesh: **(Enterprise only)** Adds rate limiting config to service-defaults [[GH-18583](https://github.com/hashicorp/consul/issues/18583)] * xds: Add a built-in Envoy extension that appends OpenTelemetry Access Logging (otel-access-logging) to the HTTP Connection Manager filter. [[GH-18336](https://github.com/hashicorp/consul/issues/18336)] * xds: Add support for patching outbound listeners to the built-in Envoy External Authorization extension. [[GH-18336](https://github.com/hashicorp/consul/issues/18336)] IMPROVEMENTS: * raft: upgrade raft-wal library version to 0.4.1. [[GH-19314](https://github.com/hashicorp/consul/issues/19314)] * xds: Use downstream protocol when connecting to local app [[GH-18573](https://github.com/hashicorp/consul/issues/18573)] * Windows: Integration tests for Consul Windows VMs [[GH-18007](https://github.com/hashicorp/consul/issues/18007)] * acl: Use templated policy to generate synthetic policies for tokens/roles with node and/or service identities [[GH-18813](https://github.com/hashicorp/consul/issues/18813)] * api: added `CheckRegisterOpts` to Agent API [[GH-18943](https://github.com/hashicorp/consul/issues/18943)] * api: added `Token` field to `ServiceRegisterOpts` type in Agent API [[GH-18983](https://github.com/hashicorp/consul/issues/18983)] * ca: Vault CA provider config no longer requires root_pki_path for secondary datacenters [[GH-17831](https://github.com/hashicorp/consul/issues/17831)] * cli: Added `-templated-policy`, `-templated-policy-file`, `-replace-templated-policy`, `-append-templated-policy`, `-replace-templated-policy-file`, `-append-templated-policy-file` and `-var` flags for creating or updating tokens/roles. [[GH-18708](https://github.com/hashicorp/consul/issues/18708)] * config: Add new `tls.defaults.verify_server_hostname` configuration option. This specifies the default value for any interfaces that support the `verify_server_hostname` option. [[GH-17155](https://github.com/hashicorp/consul/issues/17155)] * connect: update supported envoy versions to 1.24.10, 1.25.9, 1.26.4, 1.27.0 [[GH-18300](https://github.com/hashicorp/consul/issues/18300)] * ui: Use Community verbiage [[GH-18560](https://github.com/hashicorp/consul/issues/18560)] BUG FIXES: * api: add custom marshal/unmarshal for ServiceResolverConfigEntry.RequestTimeout so config entries that set this field can be read using the API. [[GH-19031](https://github.com/hashicorp/consul/issues/19031)] * ca: ensure Vault CA provider respects Vault Enterprise namespace configuration. [[GH-19095](https://github.com/hashicorp/consul/issues/19095)] * catalog api: fixes a bug with catalog api where filter query parameter was not working correctly for the `/v1/catalog/services` endpoint [[GH-18322](https://github.com/hashicorp/consul/issues/18322)] * connect: **(Enterprise only)** Fix bug where incorrect service-defaults entries were fetched to determine an upstream's protocol whenever the upstream did not explicitly define the namespace / partition. When this bug occurs, upstreams would use the protocol from a service-default entry in the default namespace / partition, rather than their own namespace / partition. * connect: Fix bug where uncleanly closed xDS connections would influence connection balancing for too long and prevent envoy instances from starting. Two new configuration fields `performance.grpc_keepalive_timeout` and `performance.grpc_keepalive_interval` now exist to allow for configuration on how often these dead connections will be cleaned up. [[GH-19339](https://github.com/hashicorp/consul/issues/19339)] * dev-mode: Fix dev mode has new line in responses. Now new line is added only when url has pretty query parameter. [[GH-18367](https://github.com/hashicorp/consul/issues/18367)] * dns: **(Enterprise only)** Fix bug where sameness group queries did not correctly inherit the agent's partition. * docs: fix list of telemetry metrics [[GH-17593](https://github.com/hashicorp/consul/issues/17593)] * gateways: Fix a bug where a service in a peered datacenter could not access an external node service through a terminating gateway [[GH-18959](https://github.com/hashicorp/consul/issues/18959)] * server: **(Enterprise Only)** Fixed an issue where snake case keys were rejected when configuring the control-plane-request-limit config entry * telemetry: emit consul version metric on a regular interval. [[GH-6876](https://github.com/hashicorp/consul/issues/6876)] * tlsutil: Default setting of ServerName field in outgoing TLS configuration for checks now handled by crypto/tls. [[GH-17481](https://github.com/hashicorp/consul/issues/17481)] ## 1.16.6 (February 13, 2024) SECURITY: * mesh: Update Envoy version to 1.26.7 to address [CVE-2024-23324](https://github.com/envoyproxy/envoy/security/advisories/GHSA-gq3v-vvhj-96j6), [CVE-2024-23325](https://github.com/envoyproxy/envoy/security/advisories/GHSA-5m7c-mrwr-pm26), [CVE-2024-23322](https://github.com/envoyproxy/envoy/security/advisories/GHSA-6p83-mfmh-qv38), [CVE-2024-23323](https://github.com/envoyproxy/envoy/security/advisories/GHSA-x278-4w4x-r7ch), [CVE-2024-23327](https://github.com/envoyproxy/envoy/security/advisories/GHSA-4h5x-x9vh-m29j), and [CVE-2023-44487](https://github.com/envoyproxy/envoy/security/advisories/GHSA-jhv4-f7mr-xx76) [[GH-20586](https://github.com/hashicorp/consul/issues/20586)] IMPROVEMENTS: * ProxyCfg: avoid setting a watch on `Internal.ServiceDump` when mesh gateway is not used. [[GH-20168](https://github.com/hashicorp/consul/issues/20168)] * ProxyCfg: only return the nodes list when querying the `Internal.ServiceDump` watch from proxycfg [[GH-20168](https://github.com/hashicorp/consul/issues/20168)] * Upgrade to use Go 1.21.7. [[GH-20545](https://github.com/hashicorp/consul/issues/20545)] BUG FIXES: * audit-logs: **(Enterprise Only)** Fixes non ASCII characters in audit logs because of gzip. [[GH-20345](https://github.com/hashicorp/consul/issues/20345)] * connect: Fix issue where re-persisting existing proxy-defaults using `http` protocol fails with a protocol-mismatch error. [[GH-20481](https://github.com/hashicorp/consul/issues/20481)] * connect: Fix regression with SAN matching on terminating gateways [GH-20360](https://github.com/hashicorp/consul/issues/20360) [[GH-20417](https://github.com/hashicorp/consul/issues/20417)] * connect: Remove code coupling where the xDS capacity controller could negatively affect raft autopilot performance. [[GH-20511](https://github.com/hashicorp/consul/issues/20511)] * mesh: Fix bug where envoy extensions could not be configured with "permissive" mTLS mode. Note that envoy extensions currently do not apply to non-mTLS traffic in permissive mode. [[GH-20406](https://github.com/hashicorp/consul/issues/20406)] ## 1.16.5 (January 23, 2024) KNOWN ISSUES: * connect: Consul versions 1.17.2 and 1.16.5 perform excessively strict TLS SAN verification on terminating gateways, which prevents connections outside of the mesh to upstream services. Terminating gateway users are advised to avoid deploying these Consul versions. A fix will be present in a future release of Consul 1.17.3 and 1.16.6 [[GH-20360](https://github.com/hashicorp/consul/issues/20360)]. SECURITY: * Update RSA key generation to use a key size of at least 2048 bits. [[GH-20112](https://github.com/hashicorp/consul/issues/20112)] * Upgrade OpenShift container images to use `ubi9-minimal:9.3` as the base image. [[GH-20014](https://github.com/hashicorp/consul/issues/20014)] IMPROVEMENTS: * Upgrade to use Go 1.21.6. [[GH-20062](https://github.com/hashicorp/consul/issues/20062)] * connect: Remove usage of deprecated Envoy field `match_subject_alt_names` in favor of `match_typed_subject_alt_names`. [[GH-19954](https://github.com/hashicorp/consul/issues/19954)] * connect: replace usage of deprecated Envoy field `envoy.config.router.v3.WeightedCluster.total_weight`. [[GH-20011](https://github.com/hashicorp/consul/issues/20011)] * xds: Replace usage of deprecated Envoy field `envoy.config.cluster.v3.Cluster.http_protocol_options` [[GH-20010](https://github.com/hashicorp/consul/issues/20010)] * xds: remove usages of deprecated Envoy fields: `envoy.config.cluster.v3.Cluster.http2_protocol_options`, `envoy.config.bootstrap.v3.Admin.access_log_path` [[GH-19940](https://github.com/hashicorp/consul/issues/19940)] * xds: replace usage of deprecated Envoy field `envoy.extensions.filters.http.lua.v3.Lua.inline_code` [[GH-20012](https://github.com/hashicorp/consul/issues/20012)] BUG FIXES: * prepared-query: (Enterprise-only) Fix issue where sameness-group failover targets to peers would attempt to query data from the default partition, rather than the sameness-group's partition always. * ui: update token list on Role details page to show only linked tokens [[GH-19912](https://github.com/hashicorp/consul/issues/19912)] ## 1.16.4 (December 12, 2023) SECURITY: * Update `github.com/golang-jwt/jwt/v4` to v4.5.0 to address [PRISMA-2022-0270](https://github.com/golang-jwt/jwt/issues/258). [[GH-19705](https://github.com/hashicorp/consul/issues/19705)] * Upgrade to use Go 1.20.12. This resolves CVEs [CVE-2023-45283](https://nvd.nist.gov/vuln/detail/CVE-2023-45283): (`path/filepath`) recognize \??\ as a Root Local Device path prefix (Windows) [CVE-2023-45284](https://nvd.nist.gov/vuln/detail/CVE-2023-45285): recognize device names with trailing spaces and superscripts (Windows) [CVE-2023-39326](https://nvd.nist.gov/vuln/detail/CVE-2023-39326): (`net/http`) limit chunked data overhead [CVE-2023-45285](https://nvd.nist.gov/vuln/detail/CVE-2023-45285): (`cmd/go`) go get may unexpectedly fallback to insecure git [[GH-19840](https://github.com/hashicorp/consul/issues/19840)] IMPROVEMENTS: * mesh: parse the proxy-defaults protocol when write the config-entry to avoid parsing it when compiling the discovery chain. [[GH-19829](https://github.com/hashicorp/consul/issues/19829)] * wan-federation: use a hash to diff config entries when replicating in the secondary DC to avoid unnecessary writes.. [[GH-19795](https://github.com/hashicorp/consul/issues/19795)] * cli: Adds cli support for checking TCP connection for ports. If -ports flag is not given, it will check for default ports of consul listed here - https://developer.hashicorp.com/consul/docs/install/ports [[GH-18329](https://github.com/hashicorp/consul/issues/18329)] * cloud: push additional server TLS metadata to HCP [[GH-19682](https://github.com/hashicorp/consul/issues/19682)] * connect: Default `stats_flush_interval` to 60 seconds when using the Consul Telemetry Collector, unless custom stats sink are present or an explicit flush interval is configured. [[GH-19663](https://github.com/hashicorp/consul/issues/19663)] * metrics: increment consul.client.rpc.failed if RPC fails because no servers are accessible [[GH-19721](https://github.com/hashicorp/consul/issues/19721)] * metrics: modify consul.client.rpc metric to exclude internal retries for consistency with consul.client.rpc.exceeded and consul.client.rpc.failed [[GH-19721](https://github.com/hashicorp/consul/issues/19721)] BUG FIXES: * CLI: fix a panic when deleting a non existing policy by name. [[GH-19679](https://github.com/hashicorp/consul/issues/19679)] * connect: Solves an issue where two upstream services with the same name in different namespaces were not getting routed to correctly by API Gateways. [[GH-19860](https://github.com/hashicorp/consul/issues/19860)] * federation: **(Enterprise Only)** Fixed an issue where namespace reconciliation could result into the secondary having dangling instances of namespaces marked for deletion * ui: only show hcp link if url is present [[GH-19443](https://github.com/hashicorp/consul/issues/19443)] * wan-federation: Fix a bug where servers wan-federated through mesh-gateways could crash due to overlapping LAN IP addresses. [[GH-19503](https://github.com/hashicorp/consul/issues/19503)] * xds: Add configurable `xds_fetch_timeout_ms` option to proxy registrations that allows users to prevent endpoints from dropping when they have proxies with a large number of upstreams. [[GH-19871](https://github.com/hashicorp/consul/issues/19871)] * xds: ensure child resources are re-sent to Envoy when the parent is updated even if the child already has pending updates. [[GH-19866](https://github.com/hashicorp/consul/issues/19866)] ## 1.16.3 (October 31, 2023) SECURITY: * Update `golang.org/x/net` to v0.17.0 to address [CVE-2023-39325](https://nvd.nist.gov/vuln/detail/CVE-2023-39325) / [CVE-2023-44487](https://nvd.nist.gov/vuln/detail/CVE-2023-44487)(`x/net/http2`). [[GH-19225](https://github.com/hashicorp/consul/issues/19225)] * Upgrade Go to 1.20.10. This resolves vulnerability [CVE-2023-39325](https://nvd.nist.gov/vuln/detail/CVE-2023-39325) / [CVE-2023-44487](https://nvd.nist.gov/vuln/detail/CVE-2023-44487)(`net/http`). [[GH-19225](https://github.com/hashicorp/consul/issues/19225)] * Upgrade `google.golang.org/grpc` to 1.56.3. This resolves vulnerability [CVE-2023-44487](https://nvd.nist.gov/vuln/detail/CVE-2023-44487). [[GH-19414](https://github.com/hashicorp/consul/issues/19414)] * connect: update supported envoy versions to 1.24.12, 1.25.11, 1.26.6 to address [CVE-2023-44487](https://github.com/envoyproxy/envoy/security/advisories/GHSA-jhv4-f7mr-xx76) [[GH-19273](https://github.com/hashicorp/consul/issues/19273)] BUG FIXES: * Mesh Gateways: Fix a bug where replicated and peered mesh gateways with hostname-based WAN addresses fail to initialize. [[GH-19268](https://github.com/hashicorp/consul/issues/19268)] * api-gateway: fix matching for different hostnames on the same listener [[GH-19120](https://github.com/hashicorp/consul/issues/19120)] * api: add custom marshal/unmarshal for ServiceResolverConfigEntry.RequestTimeout so config entries that set this field can be read using the API. [[GH-19031](https://github.com/hashicorp/consul/issues/19031)] * ca: Fix bug with Vault CA provider where renewing a retracted token would cause retries in a tight loop, degrading performance. [[GH-19285](https://github.com/hashicorp/consul/issues/19285)] * ca: Fix bug with Vault CA provider where token renewal goroutines could leak if CA failed to initialize. [[GH-19285](https://github.com/hashicorp/consul/issues/19285)] * ca: ensure Vault CA provider respects Vault Enterprise namespace configuration. [[GH-19095](https://github.com/hashicorp/consul/issues/19095)] * catalog api: fixes a bug with catalog api where filter query parameter was not working correctly for the `/v1/catalog/services` endpoint [[GH-18322](https://github.com/hashicorp/consul/issues/18322)] * connect: Fix bug where uncleanly closed xDS connections would influence connection balancing for too long and prevent envoy instances from starting. Two new configuration fields `performance.grpc_keepalive_timeout` and `performance.grpc_keepalive_interval` now exist to allow for configuration on how often these dead connections will be cleaned up. [[GH-19339](https://github.com/hashicorp/consul/issues/19339)] * dns: **(Enterprise only)** Fix bug where sameness group queries did not correctly inherit the agent's partition. * gateways: Fix a bug where a service in a peered datacenter could not access an external node service through a terminating gateway [[GH-18959](https://github.com/hashicorp/consul/issues/18959)] * server: **(Enterprise Only)** Fixed an issue where snake case keys were rejected when configuring the control-plane-request-limit config entry ## 1.15.10 (February 13, 2023) SECURITY: * mesh: Update Envoy versions to 1.28.1, 1.27.3, and 1.26.7 to address [CVE-2024-23324](https://github.com/envoyproxy/envoy/security/advisories/GHSA-gq3v-vvhj-96j6), [CVE-2024-23325](https://github.com/envoyproxy/envoy/security/advisories/GHSA-5m7c-mrwr-pm26), [CVE-2024-23322](https://github.com/envoyproxy/envoy/security/advisories/GHSA-6p83-mfmh-qv38), [CVE-2024-23323](https://github.com/envoyproxy/envoy/security/advisories/GHSA-x278-4w4x-r7ch), [CVE-2024-23327](https://github.com/envoyproxy/envoy/security/advisories/GHSA-4h5x-x9vh-m29j), and [CVE-2023-44487](https://github.com/envoyproxy/envoy/security/advisories/GHSA-jhv4-f7mr-xx76) [[GH-20590](https://github.com/hashicorp/consul/issues/20590)] IMPROVEMENTS: * ProxyCfg: avoid setting a watch on `Internal.ServiceDump` when mesh gateway is not used. [[GH-20168](https://github.com/hashicorp/consul/issues/20168)] * ProxyCfg: only return the nodes list when querying the `Internal.ServiceDump` watch from proxycfg [[GH-20168](https://github.com/hashicorp/consul/issues/20168)] * Upgrade to use Go 1.21.7. [[GH-20545](https://github.com/hashicorp/consul/issues/20545)] * mesh: update supported envoy version 1.28.0 in addition to 1.27.2, 1.26.6 to support LTS release [[GH-20323](https://github.com/hashicorp/consul/issues/20323)] BUG FIXES: * audit-logs: **(Enterprise Only)** Fixes non ASCII characters in audit logs because of gzip. [[GH-20345](https://github.com/hashicorp/consul/issues/20345)] * connect: Fix issue where re-persisting existing proxy-defaults using `http` protocol fails with a protocol-mismatch error. [[GH-20481](https://github.com/hashicorp/consul/issues/20481)] * connect: Remove code coupling where the xDS capacity controller could negatively affect raft autopilot performance. [[GH-20511](https://github.com/hashicorp/consul/issues/20511)] ## 1.15.9 (January 23, 2023) SECURITY: * Update RSA key generation to use a key size of at least 2048 bits. [[GH-20112](https://github.com/hashicorp/consul/issues/20112)] * Upgrade OpenShift container images to use `ubi9-minimal:9.3` as the base image. [[GH-20014](https://github.com/hashicorp/consul/issues/20014)] IMPROVEMENTS: * Upgrade to use Go 1.21.6. [[GH-20062](https://github.com/hashicorp/consul/issues/20062)] BUG FIXES: * ui: update token list on Role details page to show only linked tokens [[GH-19912](https://github.com/hashicorp/consul/issues/19912)] ## 1.15.8 (December 12, 2023) SECURITY: * Update `github.com/golang-jwt/jwt/v4` to v4.5.0 to address [PRISMA-2022-0270](https://github.com/golang-jwt/jwt/issues/258). [[GH-19705](https://github.com/hashicorp/consul/issues/19705)] * Upgrade to use Go 1.20.12. This resolves CVEs [CVE-2023-45283](https://nvd.nist.gov/vuln/detail/CVE-2023-45283): (`path/filepath`) recognize \??\ as a Root Local Device path prefix (Windows) [CVE-2023-45284](https://nvd.nist.gov/vuln/detail/CVE-2023-45285): recognize device names with trailing spaces and superscripts (Windows) [CVE-2023-39326](https://nvd.nist.gov/vuln/detail/CVE-2023-39326): (`net/http`) limit chunked data overhead [CVE-2023-45285](https://nvd.nist.gov/vuln/detail/CVE-2023-45285): (`cmd/go`) go get may unexpectedly fallback to insecure git [[GH-19840](https://github.com/hashicorp/consul/issues/19840)] IMPROVEMENTS: * mesh: parse the proxy-defaults protocol when write the config-entry to avoid parsing it when compiling the discovery chain. [[GH-19829](https://github.com/hashicorp/consul/issues/19829)] * wan-federation: use a hash to diff config entries when replicating in the secondary DC to avoid unnecessary writes.. [[GH-19795](https://github.com/hashicorp/consul/issues/19795)] * cli: Adds cli support for checking TCP connection for ports. If -ports flag is not given, it will check for default ports of consul listed here - https://developer.hashicorp.com/consul/docs/install/ports [[GH-18329](https://github.com/hashicorp/consul/issues/18329)] * connect: Default `stats_flush_interval` to 60 seconds when using the Consul Telemetry Collector, unless custom stats sink are present or an explicit flush interval is configured. [[GH-19663](https://github.com/hashicorp/consul/issues/19663)] * metrics: increment consul.client.rpc.failed if RPC fails because no servers are accessible [[GH-19721](https://github.com/hashicorp/consul/issues/19721)] * metrics: modify consul.client.rpc metric to exclude internal retries for consistency with consul.client.rpc.exceeded and consul.client.rpc.failed [[GH-19721](https://github.com/hashicorp/consul/issues/19721)] BUG FIXES: * CLI: fix a panic when deleting a non existing policy by name. [[GH-19679](https://github.com/hashicorp/consul/issues/19679)] * connect: Solves an issue where two upstream services with the same name in different namespaces were not getting routed to correctly by API Gateways. [[GH-19860](https://github.com/hashicorp/consul/issues/19860)] * federation: **(Enterprise Only)** Fixed an issue where namespace reconciliation could result into the secondary having dangling instances of namespaces marked for deletion * ui: only show back-to-hcp link when url is present [[GH-19444](https://github.com/hashicorp/consul/issues/19444)] * wan-federation: Fix a bug where servers wan-federated through mesh-gateways could crash due to overlapping LAN IP addresses. [[GH-19503](https://github.com/hashicorp/consul/issues/19503)] * xds: Add configurable `xds_fetch_timeout_ms` option to proxy registrations that allows users to prevent endpoints from dropping when they have proxies with a large number of upstreams. [[GH-19871](https://github.com/hashicorp/consul/issues/19871)] * xds: ensure child resources are re-sent to Envoy when the parent is updated even if the child already has pending updates. [[GH-19866](https://github.com/hashicorp/consul/issues/19866)] ## 1.15.7 (October 31, 2023) SECURITY: * Update `golang.org/x/net` to v0.17.0 to address [CVE-2023-39325](https://nvd.nist.gov/vuln/detail/CVE-2023-39325) / [CVE-2023-44487](https://nvd.nist.gov/vuln/detail/CVE-2023-44487)(`x/net/http2`). [[GH-19225](https://github.com/hashicorp/consul/issues/19225)] * Upgrade Go to 1.20.10. This resolves vulnerability [CVE-2023-39325](https://nvd.nist.gov/vuln/detail/CVE-2023-39325) / [CVE-2023-44487](https://nvd.nist.gov/vuln/detail/CVE-2023-44487)(`net/http`). [[GH-19225](https://github.com/hashicorp/consul/issues/19225)] * Upgrade `google.golang.org/grpc` to 1.56.3. This resolves vulnerability [CVE-2023-44487](https://nvd.nist.gov/vuln/detail/CVE-2023-44487). [[GH-19414](https://github.com/hashicorp/consul/issues/19414)] * connect: update supported envoy versions to 1.24.12, 1.25.11 to address [CVE-2023-44487](https://github.com/envoyproxy/envoy/security/advisories/GHSA-jhv4-f7mr-xx76) [[GH-19272](https://github.com/hashicorp/consul/issues/19272)] BUG FIXES: * Mesh Gateways: Fix a bug where replicated and peered mesh gateways with hostname-based WAN addresses fail to initialize. [[GH-19268](https://github.com/hashicorp/consul/issues/19268)] * api: add custom marshal/unmarshal for ServiceResolverConfigEntry.RequestTimeout so config entries that set this field can be read using the API. [[GH-19031](https://github.com/hashicorp/consul/issues/19031)] * ca: Fix bug with Vault CA provider where renewing a retracted token would cause retries in a tight loop, degrading performance. [[GH-19285](https://github.com/hashicorp/consul/issues/19285)] * ca: Fix bug with Vault CA provider where token renewal goroutines could leak if CA failed to initialize. [[GH-19285](https://github.com/hashicorp/consul/issues/19285)] * ca: ensure Vault CA provider respects Vault Enterprise namespace configuration. [[GH-19095](https://github.com/hashicorp/consul/issues/19095)] * catalog api: fixes a bug with catalog api where filter query parameter was not working correctly for the `/v1/catalog/services` endpoint [[GH-18322](https://github.com/hashicorp/consul/issues/18322)] * connect: Fix bug where uncleanly closed xDS connections would influence connection balancing for too long and prevent envoy instances from starting. Two new configuration fields `performance.grpc_keepalive_timeout` and `performance.grpc_keepalive_interval` now exist to allow for configuration on how often these dead connections will be cleaned up. [[GH-19339](https://github.com/hashicorp/consul/issues/19339)] * gateways: Fix a bug where a service in a peered datacenter could not access an external node service through a terminating gateway [[GH-18959](https://github.com/hashicorp/consul/issues/18959)] ## 1.14.11 (October 31, 2023) SECURITY: * Update `golang.org/x/net` to v0.17.0 to address [CVE-2023-39325](https://nvd.nist.gov/vuln/detail/CVE-2023-39325) / [CVE-2023-44487](https://nvd.nist.gov/vuln/detail/CVE-2023-44487)(`x/net/http2`). [[GH-19225](https://github.com/hashicorp/consul/issues/19225)] * Upgrade Go to 1.20.10. This resolves vulnerability [CVE-2023-39325](https://nvd.nist.gov/vuln/detail/CVE-2023-39325) / [CVE-2023-44487](https://nvd.nist.gov/vuln/detail/CVE-2023-44487)(`net/http`). [[GH-19225](https://github.com/hashicorp/consul/issues/19225)] * Upgrade `google.golang.org/grpc` to 1.56.3. This resolves vulnerability [CVE-2023-44487](https://nvd.nist.gov/vuln/detail/CVE-2023-44487). [[GH-19414](https://github.com/hashicorp/consul/issues/19414)] * connect: update supported envoy versions to 1.24.12 to address [CVE-2023-44487](https://github.com/envoyproxy/envoy/security/advisories/GHSA-jhv4-f7mr-xx76) [[GH-19271](https://github.com/hashicorp/consul/issues/19271)] BUG FIXES: * Mesh Gateways: Fix a bug where replicated and peered mesh gateways with hostname-based WAN addresses fail to initialize. [[GH-19268](https://github.com/hashicorp/consul/issues/19268)] * api: add custom marshal/unmarshal for ServiceResolverConfigEntry.RequestTimeout so config entries that set this field can be read using the API. [[GH-19031](https://github.com/hashicorp/consul/issues/19031)] * ca: ensure Vault CA provider respects Vault Enterprise namespace configuration. [[GH-19095](https://github.com/hashicorp/consul/issues/19095)] * catalog api: fixes a bug with catalog api where filter query parameter was not working correctly for the `/v1/catalog/services` endpoint [[GH-18322](https://github.com/hashicorp/consul/issues/18322)] * connect: Fix bug where uncleanly closed xDS connections would influence connection balancing for too long and prevent envoy instances from starting. Two new configuration fields `performance.grpc_keepalive_timeout` and `performance.grpc_keepalive_interval` now exist to allow for configuration on how often these dead connections will be cleaned up. [[GH-19339](https://github.com/hashicorp/consul/issues/19339)] ## 1.17.0-rc1 (October 11, 2023) BREAKING CHANGES: * api: RaftLeaderTransfer now requires an id string. An empty string can be specified to keep the old behavior. [[GH-17107](https://github.com/hashicorp/consul/issues/17107)] * audit-logging: **(Enterprise only)** allowing timestamp based filename only on rotation. initially the filename will be just file.json [[GH-18668](https://github.com/hashicorp/consul/issues/18668)] FEATURE PREVIEW: **Catalog v2** This release provides the ability to preview Consul's v2 Catalog and Resource API if enabled. The new model supports multi-port application deployments with only a single Envoy proxy. Note that the v1 and v2 catalogs are not cross compatible, and not all Consul features are available within this v2 feature preview. See the [v2 Catalog and Resource API documentation](https://developer.hashicorp.com/consul/docs/architecture/v2) for more information. The v2 Catalog and Resources API should be considered a feature preview within this release and should not be used in production environments. Limitations * The v2 catalog API feature preview does not support connections with client agents. As a result, it is only available for Kubernetes deployments, which use [Consul dataplanes](consul/docs/connect/dataplane) instead of client agents. * The v1 and v2 catalog APIs cannot run concurrently. * The Consul UI does not support multi-port services or the v2 catalog API in this release. * HCP Consul does not support multi-port services or the v2 catalog API in this release. * The v2 API only supports transparent proxy mode where services that have permissions to connect to each other can use Kube DNS to connect. Known Issues * When using the v2 API with transparent proxy, Kubernetes pods cannot use L7 liveness, readiness, or startup probes. Significant Pull Requests * [[Catalog resource controllers]](https://github.com/hashicorp/consul/tree/e6b724d06249d3e62cd75afe3ee6042ba1fd5415/internal/catalog/internal/controllers) * [[Mesh resource controllers]](https://github.com/hashicorp/consul/tree/e6b724d06249d3e62cd75afe3ee6042ba1fd5415/internal/mesh/internal/controllers) * [[Auth resource controllers]](https://github.com/hashicorp/consul/tree/e6b724d06249d3e62cd75afe3ee6042ba1fd5415/internal/auth/internal) * [[V2 Protobufs]](https://github.com/hashicorp/consul/tree/e6b724d06249d3e62cd75afe3ee6042ba1fd5415/proto-public) FEATURES: * Support custom watches on the Consul Controller framework. [[GH-18439](https://github.com/hashicorp/consul/issues/18439)] * Windows: support consul connect envoy command on Windows [[GH-17694](https://github.com/hashicorp/consul/issues/17694)] * acl: Add BindRule support for templated policies. Add new BindType: templated-policy and BindVar field for templated policy variables. [[GH-18719](https://github.com/hashicorp/consul/issues/18719)] * acl: Add new `acl.tokens.dns` config field which specifies the token used implicitly during dns checks. [[GH-17936](https://github.com/hashicorp/consul/issues/17936)] * acl: Added ACL Templated policies to simplify getting the right ACL token. [[GH-18708](https://github.com/hashicorp/consul/issues/18708)] * acl: Adds a new ACL rule for workload identities [[GH-18769](https://github.com/hashicorp/consul/issues/18769)] * api-gateway: Add support for response header modifiers on http-route configuration entry [[GH-18646](https://github.com/hashicorp/consul/issues/18646)] * api-gateway: add retry and timeout filters [[GH-18324](https://github.com/hashicorp/consul/issues/18324)] * cli: Add `bind-var` flag to `consul acl binding-rule` for templated policy variables. [[GH-18719](https://github.com/hashicorp/consul/issues/18719)] * cli: Add `consul acl templated-policy` commands to read, list and preview templated policies. [[GH-18816](https://github.com/hashicorp/consul/issues/18816)] * config-entry(api-gateway): (Enterprise only) Add GatewayPolicy to APIGateway Config Entry listeners * config-entry(api-gateway): (Enterprise only) Add JWTFilter to HTTPRoute Filters * dataplane: Allow getting bootstrap parameters when using V2 APIs [[GH-18504](https://github.com/hashicorp/consul/issues/18504)] * gateway: **(Enterprise only)** Add JWT authentication and authorization to APIGateway Listeners and HTTPRoutes. * mesh: **(Enterprise only)** Adds rate limiting config to service-defaults [[GH-18583](https://github.com/hashicorp/consul/issues/18583)] * xds: Add a built-in Envoy extension that appends OpenTelemetry Access Logging (otel-access-logging) to the HTTP Connection Manager filter. [[GH-18336](https://github.com/hashicorp/consul/issues/18336)] * xds: Add support for patching outbound listeners to the built-in Envoy External Authorization extension. [[GH-18336](https://github.com/hashicorp/consul/issues/18336)] IMPROVEMENTS: * xds: Use downstream protocol when connecting to local app [[GH-18573](https://github.com/hashicorp/consul/issues/18573)] * Windows: Integration tests for Consul Windows VMs [[GH-18007](https://github.com/hashicorp/consul/issues/18007)] * acl: Use templated policy to generate synthetic policies for tokens/roles with node and/or service identities [[GH-18813](https://github.com/hashicorp/consul/issues/18813)] * api: added `CheckRegisterOpts` to Agent API [[GH-18943](https://github.com/hashicorp/consul/issues/18943)] * api: added `Token` field to `ServiceRegisterOpts` type in Agent API [[GH-18983](https://github.com/hashicorp/consul/issues/18983)] * ca: Vault CA provider config no longer requires root_pki_path for secondary datacenters [[GH-17831](https://github.com/hashicorp/consul/issues/17831)] * cli: Added `-templated-policy`, `-templated-policy-file`, `-replace-templated-policy`, `-append-templated-policy`, `-replace-templated-policy-file`, `-append-templated-policy-file` and `-var` flags for creating or updating tokens/roles. [[GH-18708](https://github.com/hashicorp/consul/issues/18708)] * config: Add new `tls.defaults.verify_server_hostname` configuration option. This specifies the default value for any interfaces that support the `verify_server_hostname` option. [[GH-17155](https://github.com/hashicorp/consul/issues/17155)] * connect: update supported envoy versions to 1.24.10, 1.25.9, 1.26.4, 1.27.0 [[GH-18300](https://github.com/hashicorp/consul/issues/18300)] * ui: Use Community verbiage [[GH-18560](https://github.com/hashicorp/consul/issues/18560)] BUG FIXES: * api: add custom marshal/unmarshal for ServiceResolverConfigEntry.RequestTimeout so config entries that set this field can be read using the API. [[GH-19031](https://github.com/hashicorp/consul/issues/19031)] * dev-mode: Fix dev mode has new line in responses. Now new line is added only when url has pretty query parameter. [[GH-18367](https://github.com/hashicorp/consul/issues/18367)] * telemetry: emit consul version metric on a regular interval. [[GH-6876](https://github.com/hashicorp/consul/issues/6876)] * tlsutil: Default setting of ServerName field in outgoing TLS configuration for checks now handled by crypto/tls. [[GH-17481](https://github.com/hashicorp/consul/issues/17481)] ## 1.16.2 (September 19, 2023) SECURITY: * Upgrade to use Go 1.20.8. This resolves CVEs [CVE-2023-39320](https://github.com/advisories/GHSA-rxv8-v965-v333) (`cmd/go`), [CVE-2023-39318](https://github.com/advisories/GHSA-vq7j-gx56-rxjh) (`html/template`), [CVE-2023-39319](https://github.com/advisories/GHSA-vv9m-32rr-3g55) (`html/template`), [CVE-2023-39321](https://github.com/advisories/GHSA-9v7r-x7cv-v437) (`crypto/tls`), and [CVE-2023-39322](https://github.com/advisories/GHSA-892h-r6cr-53g4) (`crypto/tls`) [[GH-18742](https://github.com/hashicorp/consul/issues/18742)] IMPROVEMENTS: * Adds flag -append-filename (which works on values version, dc, node and status) to consul snapshot save command. Adding the flag -append-filename version,dc,node,status will add consul version, consul datacenter, node name and leader/follower (status) in the file name given in the snapshot save command before the file extension. [[GH-18625](https://github.com/hashicorp/consul/issues/18625)] * Reduce the frequency of metric exports from Consul to HCP from every 10s to every 1m [[GH-18584](https://github.com/hashicorp/consul/issues/18584)] * api: Add support for listing ACL tokens by service name. [[GH-18667](https://github.com/hashicorp/consul/issues/18667)] * checks: It is now possible to configure agent TCP checks to use TLS with optional server SNI and mutual authentication. To use TLS with a TCP check, the check must enable the `tcp_use_tls` boolean. By default the agent will use the TLS configuration in the `tls.default` stanza. [[GH-18381](https://github.com/hashicorp/consul/issues/18381)] * command: Adds -since flag in consul debug command which internally calls hcdiag for debug information in the past. [[GH-18797](https://github.com/hashicorp/consul/issues/18797)] * log: Currently consul logs files like this consul-{timestamp}.log. This change makes sure that there is always consul.log file with the latest logs in it. [[GH-18617](https://github.com/hashicorp/consul/issues/18617)] BUG FIXES: * Inherit locality from services when registering sidecar proxies. [[GH-18437](https://github.com/hashicorp/consul/issues/18437)] * UI : Nodes list view was breaking for synthetic-nodes. Fix handles non existence of consul-version meta for node. [[GH-18464](https://github.com/hashicorp/consul/issues/18464)] * api: Fix `/v1/agent/self` not returning latest configuration [[GH-18681](https://github.com/hashicorp/consul/issues/18681)] * ca: Vault provider now cleans up the previous Vault issuer and key when generating a new leaf signing certificate [[GH-18779](https://github.com/hashicorp/consul/issues/18779)] [[GH-18773](https://github.com/hashicorp/consul/issues/18773)] * check: prevent go routine leakage when existing Defercheck of same check id is not nil [[GH-18558](https://github.com/hashicorp/consul/issues/18558)] * connect: Fix issue where Envoy endpoints would not populate correctly after a snapshot restore. [[GH-18636](https://github.com/hashicorp/consul/issues/18636)] * gateways: Fix a bug where gateway to service mappings weren't being cleaned up properly when externally registered proxies were being deregistered. [[GH-18831](https://github.com/hashicorp/consul/issues/18831)] * telemetry: emit consul version metric on a regular interval. [[GH-18724](https://github.com/hashicorp/consul/issues/18724)] ## 1.15.6 (September 19, 2023) SECURITY: * Upgrade to use Go 1.20.8. This resolves CVEs [CVE-2023-39320](https://github.com/advisories/GHSA-rxv8-v965-v333) (`cmd/go`), [CVE-2023-39318](https://github.com/advisories/GHSA-vq7j-gx56-rxjh) (`html/template`), [CVE-2023-39319](https://github.com/advisories/GHSA-vv9m-32rr-3g55) (`html/template`), [CVE-2023-39321](https://github.com/advisories/GHSA-9v7r-x7cv-v437) (`crypto/tls`), and [CVE-2023-39322](https://github.com/advisories/GHSA-892h-r6cr-53g4) (`crypto/tls`) [[GH-18742](https://github.com/hashicorp/consul/issues/18742)] IMPROVEMENTS: * Adds flag -append-filename (which works on values version, dc, node and status) to consul snapshot save command. Adding the flag -append-filename version,dc,node,status will add consul version, consul datacenter, node name and leader/follower (status) in the file name given in the snapshot save command before the file extension. [[GH-18625](https://github.com/hashicorp/consul/issues/18625)] * Reduce the frequency of metric exports from Consul to HCP from every 10s to every 1m [[GH-18584](https://github.com/hashicorp/consul/issues/18584)] * api: Add support for listing ACL tokens by service name. [[GH-18667](https://github.com/hashicorp/consul/issues/18667)] * command: Adds -since flag in consul debug command which internally calls hcdiag for debug information in the past. [[GH-18797](https://github.com/hashicorp/consul/issues/18797)] * log: Currently consul logs files like this consul-{timestamp}.log. This change makes sure that there is always consul.log file with the latest logs in it. [[GH-18617](https://github.com/hashicorp/consul/issues/18617)] BUG FIXES: * api: Fix `/v1/agent/self` not returning latest configuration [[GH-18681](https://github.com/hashicorp/consul/issues/18681)] * ca: Vault provider now cleans up the previous Vault issuer and key when generating a new leaf signing certificate [[GH-18779](https://github.com/hashicorp/consul/issues/18779)] [[GH-18773](https://github.com/hashicorp/consul/issues/18773)] * check: prevent go routine leakage when existing Defercheck of same check id is not nil [[GH-18558](https://github.com/hashicorp/consul/issues/18558)] * gateways: Fix a bug where gateway to service mappings weren't being cleaned up properly when externally registered proxies were being deregistered. [[GH-18831](https://github.com/hashicorp/consul/issues/18831)] * telemetry: emit consul version metric on a regular interval. [[GH-18724](https://github.com/hashicorp/consul/issues/18724)] ## 1.14.10 (September 19, 2023) SECURITY: * Upgrade to use Go 1.20.8. This resolves CVEs [CVE-2023-39320](https://github.com/advisories/GHSA-rxv8-v965-v333) (`cmd/go`), [CVE-2023-39318](https://github.com/advisories/GHSA-vq7j-gx56-rxjh) (`html/template`), [CVE-2023-39319](https://github.com/advisories/GHSA-vv9m-32rr-3g55) (`html/template`), [CVE-2023-39321](https://github.com/advisories/GHSA-9v7r-x7cv-v437) (`crypto/tls`), and [CVE-2023-39322](https://github.com/advisories/GHSA-892h-r6cr-53g4) (`crypto/tls`) [[GH-18742](https://github.com/hashicorp/consul/issues/18742)] IMPROVEMENTS: * Adds flag -append-filename (which works on values version, dc, node and status) to consul snapshot save command. Adding the flag -append-filename version,dc,node,status will add consul version, consul datacenter, node name and leader/follower (status) in the file name given in the snapshot save command before the file extension. [[GH-18625](https://github.com/hashicorp/consul/issues/18625)] * api: Add support for listing ACL tokens by service name. [[GH-18667](https://github.com/hashicorp/consul/issues/18667)] * command: Adds -since flag in consul debug command which internally calls hcdiag for debug information in the past. [[GH-18797](https://github.com/hashicorp/consul/issues/18797)] * log: Currently consul logs files like this consul-{timestamp}.log. This change makes sure that there is always consul.log file with the latest logs in it. [[GH-18617](https://github.com/hashicorp/consul/issues/18617)] BUG FIXES: * api: Fix `/v1/agent/self` not returning latest configuration [[GH-18681](https://github.com/hashicorp/consul/issues/18681)] * ca: Vault provider now cleans up the previous Vault issuer and key when generating a new leaf signing certificate [[GH-18779](https://github.com/hashicorp/consul/issues/18779)] [[GH-18773](https://github.com/hashicorp/consul/issues/18773)] * gateways: Fix a bug where gateway to service mappings weren't being cleaned up properly when externally registered proxies were being deregistered. [[GH-18831](https://github.com/hashicorp/consul/issues/18831)] * telemetry: emit consul version metric on a regular interval. [[GH-18724](https://github.com/hashicorp/consul/issues/18724)] ## 1.16.1 (August 8, 2023) KNOWN ISSUES: * connect: Consul versions 1.16.0 and 1.16.1 may have issues when a snapshot restore is performed and the servers are hosting xDS streams. When this bug triggers, it will cause Envoy to incorrectly populate upstream endpoints. This bug only impacts agent-less service mesh and should be fixed in Consul 1.16.2 by [GH-18636](https://github.com/hashicorp/consul/pull/18636). SECURITY: * Update `golang.org/x/net` to v0.13.0 to address [CVE-2023-3978](https://nvd.nist.gov/vuln/detail/CVE-2023-3978). [[GH-18358](https://github.com/hashicorp/consul/issues/18358)] * Upgrade golang.org/x/net to address [CVE-2023-29406](https://nvd.nist.gov/vuln/detail/CVE-2023-29406) [[GH-18186](https://github.com/hashicorp/consul/issues/18186)] * Upgrade to use Go 1.20.6. This resolves [CVE-2023-29406](https://github.com/advisories/GHSA-f8f7-69v5-w4vx)(`net/http`) for uses of the standard library. A separate change updates dependencies on `golang.org/x/net` to use `0.12.0`. [[GH-18190](https://github.com/hashicorp/consul/issues/18190)] * Upgrade to use Go 1.20.7. This resolves vulnerability [CVE-2023-29409](https://nvd.nist.gov/vuln/detail/CVE-2023-29409)(`crypto/tls`). [[GH-18358](https://github.com/hashicorp/consul/issues/18358)] FEATURES: * cli: `consul members` command uses `-filter` expression to filter members based on bexpr. [[GH-18223](https://github.com/hashicorp/consul/issues/18223)] * cli: `consul operator raft list-peers` command shows the number of commits each follower is trailing the leader by to aid in troubleshooting. [[GH-17582](https://github.com/hashicorp/consul/issues/17582)] * cli: `consul watch` command uses `-filter` expression to filter response from checks, services, nodes, and service. [[GH-17780](https://github.com/hashicorp/consul/issues/17780)] * reloadable config: Made enable_debug config reloadable and enable pprof command to work when config toggles to true [[GH-17565](https://github.com/hashicorp/consul/issues/17565)] * ui: consul version is displayed in nodes list with filtering and sorting based on versions [[GH-17754](https://github.com/hashicorp/consul/issues/17754)] IMPROVEMENTS: * Fix some typos in metrics docs [[GH-18080](https://github.com/hashicorp/consul/issues/18080)] * acl: added builtin ACL policy that provides global read-only access (builtin/global-read-only) [[GH-18319](https://github.com/hashicorp/consul/issues/18319)] * acl: allow for a single slash character in policy names [[GH-18319](https://github.com/hashicorp/consul/issues/18319)] * connect: Add capture group labels from Envoy cluster FQDNs to Envoy exported metric labels [[GH-17888](https://github.com/hashicorp/consul/issues/17888)] * connect: Improve transparent proxy support for virtual services and failovers. [[GH-17757](https://github.com/hashicorp/consul/issues/17757)] * connect: update supported envoy versions to 1.23.12, 1.24.10, 1.25.9, 1.26.4 [[GH-18303](https://github.com/hashicorp/consul/issues/18303)] * debug: change default setting of consul debug command. now default duration is 5ms and default log level is 'TRACE' [[GH-17596](https://github.com/hashicorp/consul/issues/17596)] * extensions: Improve validation and error feedback for `property-override` builtin Envoy extension [[GH-17759](https://github.com/hashicorp/consul/issues/17759)] * hcp: Add dynamic configuration support for the export of server metrics to HCP. [[GH-18168](https://github.com/hashicorp/consul/issues/18168)] * hcp: Removes requirement for HCP to provide a management token [[GH-18140](https://github.com/hashicorp/consul/issues/18140)] * http: GET API `operator/usage` endpoint now returns node count cli: `consul operator usage` command now returns node count [[GH-17939](https://github.com/hashicorp/consul/issues/17939)] * mesh: Expose remote jwks cluster configuration through jwt-provider config entry [[GH-17978](https://github.com/hashicorp/consul/issues/17978)] * mesh: Stop jwt providers referenced by intentions from being deleted. [[GH-17755](https://github.com/hashicorp/consul/issues/17755)] * ui: the topology view now properly displays services with mixed connect and non-connect instances. [[GH-13023](https://github.com/hashicorp/consul/issues/13023)] * xds: Explicitly enable WebSocket connection upgrades in HTTP connection manager [[GH-18150](https://github.com/hashicorp/consul/issues/18150)] BUG FIXES: * Fix a bug that wrongly trims domains when there is an overlap with DC name. [[GH-17160](https://github.com/hashicorp/consul/issues/17160)] * api-gateway: fix race condition in proxy config generation when Consul is notified of the bound-api-gateway config entry before it is notified of the api-gateway config entry. [[GH-18291](https://github.com/hashicorp/consul/issues/18291)] * api: Fix client deserialization errors by marking new Enterprise-only prepared query fields as omit empty [[GH-18184](https://github.com/hashicorp/consul/issues/18184)] * ca: Fixes a Vault CA provider bug where updating RootPKIPath but not IntermediatePKIPath would not renew leaf signing certificates [[GH-18112](https://github.com/hashicorp/consul/issues/18112)] * connect/ca: Fixes a bug preventing CA configuration updates in secondary datacenters [[GH-17846](https://github.com/hashicorp/consul/issues/17846)] * connect: **(Enterprise only)** Fix bug where intentions referencing sameness groups would not always apply to members properly. * connect: Fix incorrect protocol config merging for transparent proxy implicit upstreams. [[GH-17894](https://github.com/hashicorp/consul/issues/17894)] * connect: Removes the default health check from the `consul connect envoy` command when starting an API Gateway. This health check would always fail. [[GH-18011](https://github.com/hashicorp/consul/issues/18011)] * connect: fix a bug with Envoy potentially starting with incomplete configuration by not waiting enough for initial xDS configuration. [[GH-18024](https://github.com/hashicorp/consul/issues/18024)] * gateway: Fixes a bug where envoy would silently reject RSA keys that are smaller than 2048 bits, we now reject those earlier in the process when we validate the certificate. [[GH-17911](https://github.com/hashicorp/consul/issues/17911)] * http: fixed API endpoint `PUT /acl/token/:AccessorID` (update token), no longer requires `AccessorID` in the request body. Web UI can now update tokens. [[GH-17739](https://github.com/hashicorp/consul/issues/17739)] * mesh: **(Enterprise Only)** Require that `jwt-provider` config entries are created in the `default` namespace. [[GH-18325](https://github.com/hashicorp/consul/issues/18325)] * snapshot: fix access denied and handle is invalid when we call snapshot save on windows - skip sync() for folders in windows in https://github.com/rboyer/safeio/pull/3 [[GH-18302](https://github.com/hashicorp/consul/issues/18302)] * xds: Prevent partial application of non-Required Envoy extensions in the case of failure. [[GH-18068](https://github.com/hashicorp/consul/issues/18068)] ## 1.15.5 (August 8, 2023) SECURITY: * Update `golang.org/x/net` to v0.13.0 to address [CVE-2023-3978](https://nvd.nist.gov/vuln/detail/CVE-2023-3978). [[GH-18358](https://github.com/hashicorp/consul/issues/18358)] * Upgrade golang.org/x/net to address [CVE-2023-29406](https://nvd.nist.gov/vuln/detail/CVE-2023-29406) [[GH-18186](https://github.com/hashicorp/consul/issues/18186)] * Upgrade to use Go 1.20.6. This resolves [CVE-2023-29406](https://github.com/advisories/GHSA-f8f7-69v5-w4vx)(`net/http`) for uses of the standard library. A separate change updates dependencies on `golang.org/x/net` to use `0.12.0`. [[GH-18190](https://github.com/hashicorp/consul/issues/18190)] * Upgrade to use Go 1.20.7. This resolves vulnerability [CVE-2023-29409](https://nvd.nist.gov/vuln/detail/CVE-2023-29409)(`crypto/tls`). [[GH-18358](https://github.com/hashicorp/consul/issues/18358)] FEATURES: * cli: `consul members` command uses `-filter` expression to filter members based on bexpr. [[GH-18223](https://github.com/hashicorp/consul/issues/18223)] * cli: `consul watch` command uses `-filter` expression to filter response from checks, services, nodes, and service. [[GH-17780](https://github.com/hashicorp/consul/issues/17780)] * reloadable config: Made enable_debug config reloadable and enable pprof command to work when config toggles to true [[GH-17565](https://github.com/hashicorp/consul/issues/17565)] IMPROVEMENTS: * Fix some typos in metrics docs [[GH-18080](https://github.com/hashicorp/consul/issues/18080)] * acl: added builtin ACL policy that provides global read-only access (builtin/global-read-only) [[GH-18319](https://github.com/hashicorp/consul/issues/18319)] * acl: allow for a single slash character in policy names [[GH-18319](https://github.com/hashicorp/consul/issues/18319)] * connect: Add capture group labels from Envoy cluster FQDNs to Envoy exported metric labels [[GH-17888](https://github.com/hashicorp/consul/issues/17888)] * connect: update supported envoy versions to 1.22.11, 1.23.12, 1.24.10, 1.25.9 [[GH-18304](https://github.com/hashicorp/consul/issues/18304)] * hcp: Add dynamic configuration support for the export of server metrics to HCP. [[GH-18168](https://github.com/hashicorp/consul/issues/18168)] * hcp: Removes requirement for HCP to provide a management token [[GH-18140](https://github.com/hashicorp/consul/issues/18140)] * xds: Explicitly enable WebSocket connection upgrades in HTTP connection manager [[GH-18150](https://github.com/hashicorp/consul/issues/18150)] BUG FIXES: * Fix a bug that wrongly trims domains when there is an overlap with DC name. [[GH-17160](https://github.com/hashicorp/consul/issues/17160)] * api-gateway: fix race condition in proxy config generation when Consul is notified of the bound-api-gateway config entry before it is notified of the api-gateway config entry. [[GH-18291](https://github.com/hashicorp/consul/issues/18291)] * connect/ca: Fixes a bug preventing CA configuration updates in secondary datacenters [[GH-17846](https://github.com/hashicorp/consul/issues/17846)] * connect: Fix incorrect protocol config merging for transparent proxy implicit upstreams. [[GH-17894](https://github.com/hashicorp/consul/issues/17894)] * connect: Removes the default health check from the `consul connect envoy` command when starting an API Gateway. This health check would always fail. [[GH-18011](https://github.com/hashicorp/consul/issues/18011)] * connect: fix a bug with Envoy potentially starting with incomplete configuration by not waiting enough for initial xDS configuration. [[GH-18024](https://github.com/hashicorp/consul/issues/18024)] * snapshot: fix access denied and handle is invalid when we call snapshot save on windows - skip sync() for folders in windows in https://github.com/rboyer/safeio/pull/3 [[GH-18302](https://github.com/hashicorp/consul/issues/18302)] ## 1.14.9 (August 8, 2023) SECURITY: * Update `golang.org/x/net` to v0.13.0 to address [CVE-2023-3978](https://nvd.nist.gov/vuln/detail/CVE-2023-3978). [[GH-18358](https://github.com/hashicorp/consul/issues/18358)] * Upgrade golang.org/x/net to address [CVE-2023-29406](https://nvd.nist.gov/vuln/detail/CVE-2023-29406) [[GH-18186](https://github.com/hashicorp/consul/issues/18186)] * Upgrade to use Go 1.20.6. This resolves [CVE-2023-29406](https://github.com/advisories/GHSA-f8f7-69v5-w4vx)(`net/http`) for uses of the standard library. A separate change updates dependencies on `golang.org/x/net` to use `0.12.0`. [[GH-18190](https://github.com/hashicorp/consul/issues/18190)] * Upgrade to use Go 1.20.7. This resolves vulnerability [CVE-2023-29409](https://nvd.nist.gov/vuln/detail/CVE-2023-29409)(`crypto/tls`). [[GH-18358](https://github.com/hashicorp/consul/issues/18358)] FEATURES: * cli: `consul members` command uses `-filter` expression to filter members based on bexpr. [[GH-18223](https://github.com/hashicorp/consul/issues/18223)] * cli: `consul watch` command uses `-filter` expression to filter response from checks, services, nodes, and service. [[GH-17780](https://github.com/hashicorp/consul/issues/17780)] * reloadable config: Made enable_debug config reloadable and enable pprof command to work when config toggles to true [[GH-17565](https://github.com/hashicorp/consul/issues/17565)] IMPROVEMENTS: * Fix some typos in metrics docs [[GH-18080](https://github.com/hashicorp/consul/issues/18080)] * acl: added builtin ACL policy that provides global read-only access (builtin/global-read-only) [[GH-18319](https://github.com/hashicorp/consul/issues/18319)] * acl: allow for a single slash character in policy names [[GH-18319](https://github.com/hashicorp/consul/issues/18319)] * connect: update supported envoy versions to 1.21.6, 1.22.11, 1.23.12, 1.24.10 [[GH-18305](https://github.com/hashicorp/consul/issues/18305)] * hcp: Removes requirement for HCP to provide a management token [[GH-18140](https://github.com/hashicorp/consul/issues/18140)] * xds: Explicitly enable WebSocket connection upgrades in HTTP connection manager [[GH-18150](https://github.com/hashicorp/consul/issues/18150)] BUG FIXES: * Fix a bug that wrongly trims domains when there is an overlap with DC name. [[GH-17160](https://github.com/hashicorp/consul/issues/17160)] * connect/ca: Fixes a bug preventing CA configuration updates in secondary datacenters [[GH-17846](https://github.com/hashicorp/consul/issues/17846)] * connect: Fix incorrect protocol config merging for transparent proxy implicit upstreams. [[GH-17894](https://github.com/hashicorp/consul/issues/17894)] * connect: fix a bug with Envoy potentially starting with incomplete configuration by not waiting enough for initial xDS configuration. [[GH-18024](https://github.com/hashicorp/consul/issues/18024)] * snapshot: fix access denied and handle is invalid when we call snapshot save on windows - skip sync() for folders in windows in https://github.com/rboyer/safeio/pull/3 [[GH-18302](https://github.com/hashicorp/consul/issues/18302)] ## 1.16.0 (June 26, 2023) KNOWN ISSUES: * connect: Consul versions 1.16.0 and 1.16.1 may have issues when a snapshot restore is performed and the servers are hosting xDS streams. When this bug triggers, it will cause Envoy to incorrectly populate upstream endpoints. This bug only impacts agent-less service mesh and should be fixed in Consul 1.16.2 by [GH-18636](https://github.com/hashicorp/consul/pull/18636). BREAKING CHANGES: * api: The `/v1/health/connect/` and `/v1/health/ingress/` endpoints now immediately return 403 "Permission Denied" errors whenever a token with insufficient `service:read` permissions is provided. Prior to this change, the endpoints returned a success code with an empty result list when a token with insufficient permissions was provided. [[GH-17424](https://github.com/hashicorp/consul/issues/17424)] * peering: Removed deprecated backward-compatibility behavior. Upstream overrides in service-defaults will now only apply to peer upstreams when the `peer` field is provided. Visit the 1.16.x [upgrade instructions](https://developer.hashicorp.com/consul/docs/upgrading/upgrade-specific) for more information. [[GH-16957](https://github.com/hashicorp/consul/issues/16957)] SECURITY: * Bump Dockerfile base image to `alpine:3.18`. [[GH-17719](https://github.com/hashicorp/consul/issues/17719)] * audit-logging: **(Enterprise only)** limit `v1/operator/audit-hash` endpoint to ACL token with `operator:read` privileges. FEATURES: * api: (Enterprise only) Add `POST /v1/operator/audit-hash` endpoint to calculate the hash of the data used by the audit log hash function and salt. * cli: (Enterprise only) Add a new `consul operator audit hash` command to retrieve and compare the hash of the data used by the audit log hash function and salt. * cli: Adds new command - `consul services export` - for exporting a service to a peer or partition [[GH-15654](https://github.com/hashicorp/consul/issues/15654)] * connect: **(Consul Enterprise only)** Implement order-by-locality failover. * mesh: Add new permissive mTLS mode that allows sidecar proxies to forward incoming traffic unmodified to the application. This adds `AllowEnablingPermissiveMutualTLS` setting to the mesh config entry and the `MutualTLSMode` setting to proxy-defaults and service-defaults. [[GH-17035](https://github.com/hashicorp/consul/issues/17035)] * mesh: Support configuring JWT authentication in Envoy. [[GH-17452](https://github.com/hashicorp/consul/issues/17452)] * server: **(Enterprise Only)** added server side RPC requests IP based read/write rate-limiter. [[GH-4633](https://github.com/hashicorp/consul/issues/4633)] * server: **(Enterprise Only)** allow automatic license utilization reporting. [[GH-5102](https://github.com/hashicorp/consul/issues/5102)] * server: added server side RPC requests global read/write rate-limiter. [[GH-16292](https://github.com/hashicorp/consul/issues/16292)] * xds: Add `property-override` built-in Envoy extension that directly patches Envoy resources. [[GH-17487](https://github.com/hashicorp/consul/issues/17487)] * xds: Add a built-in Envoy extension that inserts External Authorization (ext_authz) network and HTTP filters. [[GH-17495](https://github.com/hashicorp/consul/issues/17495)] * xds: Add a built-in Envoy extension that inserts Wasm HTTP filters. [[GH-16877](https://github.com/hashicorp/consul/issues/16877)] * xds: Add a built-in Envoy extension that inserts Wasm network filters. [[GH-17505](https://github.com/hashicorp/consul/issues/17505)] IMPROVEMENTS: * * api: Support filtering for config entries. [[GH-17183](https://github.com/hashicorp/consul/issues/17183)] * * cli: Add `-filter` option to `consul config list` for filtering config entries. [[GH-17183](https://github.com/hashicorp/consul/issues/17183)] * agent: remove agent cache dependency from service mesh leaf certificate management [[GH-17075](https://github.com/hashicorp/consul/issues/17075)] * api: Enable setting query options on agent force-leave endpoint. [[GH-15987](https://github.com/hashicorp/consul/issues/15987)] * audit-logging: **(Enterprise only)** enable error response and request body logging * ca: automatically set up Vault's auto-tidy setting for tidy_expired_issuers when using Vault as a CA provider. [[GH-17138](https://github.com/hashicorp/consul/issues/17138)] * ca: support Vault agent auto-auth config for Vault CA provider using AliCloud authentication. [[GH-16224](https://github.com/hashicorp/consul/issues/16224)] * ca: support Vault agent auto-auth config for Vault CA provider using AppRole authentication. [[GH-16259](https://github.com/hashicorp/consul/issues/16259)] * ca: support Vault agent auto-auth config for Vault CA provider using Azure MSI authentication. [[GH-16298](https://github.com/hashicorp/consul/issues/16298)] * ca: support Vault agent auto-auth config for Vault CA provider using JWT authentication. [[GH-16266](https://github.com/hashicorp/consul/issues/16266)] * ca: support Vault agent auto-auth config for Vault CA provider using Kubernetes authentication. [[GH-16262](https://github.com/hashicorp/consul/issues/16262)] * command: Adds ACL enabled to status output on agent startup. [[GH-17086](https://github.com/hashicorp/consul/issues/17086)] * command: Allow creating ACL Token TTL with greater than 24 hours with the -expires-ttl flag. [[GH-17066](https://github.com/hashicorp/consul/issues/17066)] * connect: **(Enterprise Only)** Add support for specifying "Partition" and "Namespace" in Prepared Queries failover rules. * connect: update supported envoy versions to 1.23.10, 1.24.8, 1.25.7, 1.26.2 [[GH-17546](https://github.com/hashicorp/consul/issues/17546)] * connect: update supported envoy versions to 1.23.8, 1.24.6, 1.25.4, 1.26.0 [[GH-5200](https://github.com/hashicorp/consul/issues/5200)] * fix metric names in /docs/agent/telemetry [[GH-17577](https://github.com/hashicorp/consul/issues/17577)] * gateway: Change status condition reason for invalid certificate on a listener from "Accepted" to "ResolvedRefs". [[GH-17115](https://github.com/hashicorp/consul/issues/17115)] * http: accept query parameters `datacenter`, `ap` (enterprise-only), and `namespace` (enterprise-only). Both short-hand and long-hand forms of these query params are now supported via the HTTP API (dc/datacenter, ap/partition, ns/namespace). [[GH-17525](https://github.com/hashicorp/consul/issues/17525)] * systemd: set service type to notify. [[GH-16845](https://github.com/hashicorp/consul/issues/16845)] * ui: Update alerts to Hds::Alert component [[GH-16412](https://github.com/hashicorp/consul/issues/16412)] * ui: Update to use Hds::Toast component to show notifications [[GH-16519](https://github.com/hashicorp/consul/issues/16519)] * ui: update from