Commit Graph

18 Commits (f306c753e2e5f58d35eccc62086271a23d83efe7)

Author SHA1 Message Date
R.B. Boyer 6adad71125
wan federation via mesh gateways (#6884)
This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch:

There are several distinct chunks of code that are affected:

* new flags and config options for the server

* retry join WAN is slightly different

* retry join code is shared to discover primary mesh gateways from secondary datacenters

* because retry join logic runs in the *agent* and the results of that
  operation for primary mesh gateways are needed in the *server* there are
  some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur
  at multiple layers of abstraction just to pass the data down to the right
  layer.

* new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers

* the function signature for RPC dialing picked up a new required field (the
  node name of the destination)

* several new RPCs for manipulating a FederationState object:
  `FederationState:{Apply,Get,List,ListMeshGateways}`

* 3 read-only internal APIs for debugging use to invoke those RPCs from curl

* raft and fsm changes to persist these FederationStates

* replication for FederationStates as they are canonically stored in the
  Primary and replicated to the Secondaries.

* a special derivative of anti-entropy that runs in secondaries to snapshot
  their local mesh gateway `CheckServiceNodes` and sync them into their upstream
  FederationState in the primary (this works in conjunction with the
  replication to distribute addresses for all mesh gateways in all DCs to all
  other DCs)

* a "gateway locator" convenience object to make use of this data to choose
  the addresses of gateways to use for any given RPC or gossip operation to a
  remote DC. This gets data from the "retry join" logic in the agent and also
  directly calls into the FSM.

* RPC (`:8300`) on the server sniffs the first byte of a new connection to
  determine if it's actually doing native TLS. If so it checks the ALPN header
  for protocol determination (just like how the existing system uses the
  type-byte marker).

* 2 new kinds of protocols are exclusively decoded via this native TLS
  mechanism: one for ferrying "packet" operations (udp-like) from the gossip
  layer and one for "stream" operations (tcp-like). The packet operations
  re-use sockets (using length-prefixing) to cut down on TLS re-negotiation
  overhead.

* the server instances specially wrap the `memberlist.NetTransport` when running
  with gateway federation enabled (in a `wanfed.Transport`). The general gist is
  that if it tries to dial a node in the SAME datacenter (deduced by looking
  at the suffix of the node name) there is no change. If dialing a DIFFERENT
  datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh
  gateways to eventually end up in a server's :8300 port.

* a new flag when launching a mesh gateway via `consul connect envoy` to
  indicate that the servers are to be exposed. This sets a special service
  meta when registering the gateway into the catalog.

* `proxycfg/xds` notice this metadata blob to activate additional watches for
  the FederationState objects as well as the location of all of the consul
  servers in that datacenter.

* `xds:` if the extra metadata is in place additional clusters are defined in a
  DC to bulk sink all traffic to another DC's gateways. For the current
  datacenter we listen on a wildcard name (`server.<dc>.consul`) that load
  balances all servers as well as one mini-cluster per node
  (`<node>.server.<dc>.consul`)

* the `consul tls cert create` command got a new flag (`-node`) to help create
  an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 15:59:02 -05:00
Chris Piraino 401221de58
Allow users to configure either unstructured or JSON logging (#7130)
* hclog Allow users to choose between unstructured and JSON logging
2020-01-28 17:50:41 -06:00
Hans Hasselberg 11a571de95
agent: setup grpc server with auto_encrypt certs and add -https-port (#7086)
* setup grpc server with TLS config used across consul.
* add -https-port flag
2020-01-22 11:32:17 +01:00
Matej Urbas ce023359fe agent: configurable MaxQueryTime and DefaultQueryTime. (#3777) 2020-01-17 14:20:57 +01:00
javicrespo b006060d4c log rotation: limit count of rotated log files (#5831) 2019-07-19 15:36:34 -06:00
Akshay Ganeshen 98a35fbe69 dns: support alt domains for dns resolution (#5940)
this adds an option for an alt domain to be used with dns while migrating to a new consul domain.
2019-06-27 12:00:37 +02:00
Sarah Christoff d3d92d76f3
ui: modify content path (#5950)
* Add ui-content-path flag

* tests complete, regex validator on string, index.html updated

* cleaning up debugging stuff

* ui: Enable ember environment configuration to be set via the go binary at runtime (#5934)

* ui: Only inject {{.ContentPath}} if we are makeing a prod build...

...otherwise we just use the current rootURL

This gets injected into a <base /> node which solves the assets path
problem but not the ember problem

* ui: Pull out the <base href=""> value and inject it into ember env

See previous commit:

The <base href=""> value is 'sometimes' injected from go at index
serve time. We pass this value down to ember by overwriting the ember
config that is injected via a <meta> tag. This has to be done before
ember bootup.

Sometimes (during testing and development, basically not production)
this is injected with the already existing value, in which case this
essentially changes nothing.

The code here is slightly abstracted away from our specific usage to
make it easier for anyone else to use, and also make sure we can cope
with using this same method to pass variables down from the CLI through
to ember in the future.

* ui: We can't use <base /> move everything to javascript (#5941)

Unfortuantely we can't seem to be able to use <base> and rootURL
together as URL paths will get doubled up (`ui/ui/`).

This moves all the things that we need to interpolate with .ContentPath
to the `startup` javascript so we can conditionally print out
`{{.ContentPath}}` in lots of places (now we can't use base)

* fixed when we serve index.html

* ui: For writing a ContentPath, we also need to cope with testing... (#5945)

...and potentially more environments

Testing has more additional things in a separate index.html in `tests/`

This make the entire thing a little saner and uses just javascriopt
template literals instead of a pseudo handbrake synatx for our
templating of these files.

Intead of just templating the entire file this way, we still only
template `{{content-for 'head'}}` and `{{content-for 'body'}}`
in this way to ensure we support other plugins/addons

* build: Loosen up the regex for retrieving the CONSUL_VERSION (#5946)

* build: Loosen up the regex for retrieving the CONSUL_VERSION

1. Previously the `sed` replacement was searching for the CONSUL_VERSION
comment at the start of a line, it no longer does this to allow for
indentation.
2. Both `grep` and `sed` where looking for the omment at the end of the
line. We've removed this restriction here. We don't need to remove it
right now, but if we ever put the comment followed by something here the
searching would break.
3. Added `xargs` for trimming the resulting version string. We aren't
using this already in the rest of the scripts, but we are pretty sure
this is available on most systems.

* ui: Fix erroneous variable, and also force an ember cache clean on build

1. We referenced a variable incorrectly here, this fixes that.
2. We also made sure that every `make` target clears ember's `tmp` cache
to ensure that its not using any caches that have since been edited
everytime we call a `make` target.

* added docs, fixed encoding

* fixed go fmt

* Update agent/config/config.go

Co-Authored-By: R.B. Boyer <public@richardboyer.net>

* Completed Suggestions

* run gofmt on http.go

* fix testsanitize

* fix fullconfig/hcl by setting correct 'want'

* ran gofmt on agent/config/runtime_test.go

* Update website/source/docs/agent/options.html.md

Co-Authored-By: Hans Hasselberg <me@hans.io>

* Update website/source/docs/agent/options.html.md

Co-Authored-By: kaitlincarter-hc <43049322+kaitlincarter-hc@users.noreply.github.com>

* remove contentpath from redirectFS struct
2019-06-26 11:43:30 -05:00
Pierre Souchay 0e907f5aa8 Support for maximum size for Output of checks (#5233)
* Support for maximum size for Output of checks

This PR allows users to limit the size of output produced by checks at the agent 
and check level.

When set at the agent level, it will limit the output for all checks monitored
by the agent.

When set at the check level, it can override the agent max for a specific check but
only if it is lower than the agent max.

Default value is 4k, and input must be at least 1.
2019-06-26 09:43:25 -06:00
Freddy d19eb36085
Restrict config file extensions read 2019-04-30 12:43:32 -06:00
Aestek c043de5381 [Security] Allow blocking Write endpoints on Agent using Network Addresses (#4719)
* Add -write-allowed-nets option

* Add documentation for the new write_allowed_nets option
2019-01-10 09:27:26 -05:00
Aestek 25f04fbd21 [Security] Add finer control over script checks (#4715)
* Add -enable-local-script-checks options

These options allow for a finer control over when script checks are enabled by
giving the option to only allow them when they are declared from the local
file system.

* Add documentation for the new option

* Nitpick doc wording
2018-10-11 13:22:11 +01:00
Paul Banks 8336b5e6b9 XDS Server Config (#4730)
* Config for the coming XDS server

* Default gRPC to 8502 for -dev mode; Re-merge the command Info output that shows gRPC.
2018-10-10 16:55:34 +01:00
Siva Prasad ca35d04472
Adds a new command line flag -log-file for file based logging. (#4581)
* Added log-file flag to capture Consul logs in a user specified file

* Refactored code.

* Refactored code. Added flags to rotate logs based on bytes and duration

* Added the flags for log file and log rotation on the webpage

* Fixed TestSantize from failing due to the addition of 3 flags

* Introduced changes : mutex, data-dir log writes, rotation logic

* Added test for logfile and updated the default log destination for docs

* Log name now uses UnixNano

* TestLogFile is now uses t.Parallel()

* Removed unnecessary int64Val function

* Updated docs to reflect default log name for log-file

* No longer writes to data-dir and adds .log if the filename has no extension
2018-08-29 16:56:58 -04:00
azam 342bcb1c24 Make Serf LAN & WAN port configurable from CLI
Make RPC port accessible to CLI

Add tests and documentation for server-port, serf-lan-port, serf-wan-port CLI arguments
2018-07-21 02:17:21 +09:00
Frank Schröder 874e350b2f config: add -config-format option (#3626)
* config: refactor ReadPath(s) methods without side-effects

Return the sources instead of modifying the state.

* config: clean data dir before every test

* config: add tests for config-file and config-dir

* config: add -config-format option

Starting with Consul 1.0 all config files must have a '.json' or '.hcl'
extension to make it unambigous how the data should be parsed. Some
automation tools generate temporary files by appending a random string
to the generated file which obfuscates the extension and prevents the
file type detection.

This patch adds a -config-format option which can be used to override
the auto-detection behavior by forcing all config files or all files
within a config directory independent of their extension to be
interpreted as of this format.

Fixes #3620
2017-10-31 17:30:01 -05:00
Frank Schroeder b97ab367f4
config: return error on extra command line arguments (#3397)
The `consul agent` command was ignoring extra command line arguments
which can lead to confusion when the user has for example forgotten to
add a dash in front of an argument or is not using an `=` when setting
boolean flags to `true`. `-bootstrap true` is not the same as
`-bootstrap=true`, for example.

Since all command line flags are known and we don't expect unparsed
arguments we can return an error. However, this may make it slightly
more difficult in the future if we ever wanted to have these kinds of
arguments.

Fixes #3397
2017-10-23 08:07:48 +02:00
James Phillips a75a779469
Renames `enable_ui` to `ui` to keep compatibility with existing configs. 2017-09-26 00:05:55 -07:00
Frank Schröder 12216583a1 New config parser, HCL support, multiple bind addrs (#3480)
* new config parser for agent

This patch implements a new config parser for the consul agent which
makes the following changes to the previous implementation:

 * add HCL support
 * all configuration fragments in tests and for default config are
   expressed as HCL fragments
 * HCL fragments can be provided on the command line so that they
   can eventually replace the command line flags.
 * HCL/JSON fragments are parsed into a temporary Config structure
   which can be merged using reflection (all values are pointers).
   The existing merge logic of overwrite for values and append
   for slices has been preserved.
 * A single builder process generates a typed runtime configuration
   for the agent.

The new implementation is more strict and fails in the builder process
if no valid runtime configuration can be generated. Therefore,
additional validations in other parts of the code should be removed.

The builder also pre-computes all required network addresses so that no
address/port magic should be required where the configuration is used
and should therefore be removed.

* Upgrade github.com/hashicorp/hcl to support int64

* improve error messages

* fix directory permission test

* Fix rtt test

* Fix ForceLeave test

* Skip performance test for now until we know what to do

* Update github.com/hashicorp/memberlist to update log prefix

* Make memberlist use the default logger

* improve config error handling

* do not fail on non-existing data-dir

* experiment with non-uniform timeouts to get a handle on stalled leader elections

* Run tests for packages separately to eliminate the spurious port conflicts

* refactor private address detection and unify approach for ipv4 and ipv6.

Fixes #2825

* do not allow unix sockets for DNS

* improve bind and advertise addr error handling

* go through builder using test coverage

* minimal update to the docs

* more coverage tests fixed

* more tests

* fix makefile

* cleanup

* fix port conflicts with external port server 'porter'

* stop test server on error

* do not run api test that change global ENV concurrently with the other tests

* Run remaining api tests concurrently

* no need for retry with the port number service

* monkey patch race condition in go-sockaddr until we understand why that fails

* monkey patch hcl decoder race condidtion until we understand why that fails

* monkey patch spurious errors in strings.EqualFold from here

* add test for hcl decoder race condition. Run with go test -parallel 128

* Increase timeout again

* cleanup

* don't log port allocations by default

* use base command arg parsing to format help output properly

* handle -dc deprecation case in Build

* switch autopilot.max_trailing_logs to int

* remove duplicate test case

* remove unused methods

* remove comments about flag/config value inconsistencies

* switch got and want around since the error message was misleading.

* Removes a stray debug log.

* Removes a stray newline in imports.

* Fixes TestACL_Version8.

* Runs go fmt.

* Adds a default case for unknown address types.

* Reoders and reformats some imports.

* Adds some comments and fixes typos.

* Reorders imports.

* add unix socket support for dns later

* drop all deprecated flags and arguments

* fix wrong field name

* remove stray node-id file

* drop unnecessary patch section in test

* drop duplicate test

* add test for LeaveOnTerm and SkipLeaveOnInt in client mode

* drop "bla" and add clarifying comment for the test

* split up tests to support enterprise/non-enterprise tests

* drop raft multiplier and derive values during build phase

* sanitize runtime config reflectively and add test

* detect invalid config fields

* fix tests with invalid config fields

* use different values for wan sanitiziation test

* drop recursor in favor of recursors

* allow dns_config.udp_answer_limit to be zero

* make sure tests run on machines with multiple ips

* Fix failing tests in a few more places by providing a bind address in the test

* Gets rid of skipped TestAgent_CheckPerformanceSettings and adds case for builder.

* Add porter to server_test.go to make tests there less flaky

* go fmt
2017-09-25 11:40:42 -07:00