consul

Commit Graph

Author	SHA1	Message	Date
R.B. Boyer	d7c7858d87	Fix even more test flakes in intentions related envoy integration tests (#9013 ) The key thing here is to use `curl --no-keepalive` so that envoy pre-1.15 tests will reliably use the latest listener every time. Extra: - Switched away from editing line-item intentions the legacy way. - Removed some teardown scripts, as we don't share anything between cases anyway - Removed unnecessary use of `run` in some places.	4 years ago
R.B. Boyer	934c65ad77	fix flaky envoy integration tests involving intentions (#8996 ) There is a delay between an intentions change being made, and it being reflected in the Envoy runtime configuration. Now that the enforcement happens inside of Envoy instead of over in the agent, our tests need to explicitly wait until the xDS reconfiguration is complete before attempting to assert intentions worked. Also remove a few double retry loops.	4 years ago
R.B. Boyer	a2c50d3303	connect: add support for envoy 1.16.0, drop support for 1.12.x, and bump point releases as well (#8944 ) Supported versions will be: "1.16.0", "1.15.2", "1.14.5", "1.13.6"	4 years ago
R.B. Boyer	0bf62246e5	speed up envoy integration tests by removing docker-compose (#8982 ) This speeds up individual envoy integration test runs from ~23m to ~14m. It's also a pre-req for possibly switching to doing the tests entirely within Go (no shell-outs).	4 years ago
R.B. Boyer	da4ec9ff27	restore the discovery of tests cases by file system existence (#8983 )	4 years ago
R.B. Boyer	a68c0ce1e7	speed up envoy integ tests by not politely stopping containers before destroying them (#8969 ) In local testing this sped up the stop_services call from 11s to 1s per test.	4 years ago
R.B. Boyer	1b413b0444	connect: support defining intentions using layer 7 criteria (#8839 ) Extend Consul’s intentions model to allow for request-based access control enforcement for HTTP-like protocols in addition to the existing connection-based enforcement for unspecified protocols (e.g. tcp).	4 years ago
s-christoff	5da640b287	Add load testing framework (#8571 )	4 years ago
R.B. Boyer	9801ef8eb1	agent: enable enable_central_service_config by default (#8746 )	4 years ago
Jack	9e1c6727f9	Add http2 and grpc support to ingress gateways (#8458 )	4 years ago
R.B. Boyer	74d5df7c7a	xds: use envoy's rbac filter to handle intentions entirely within envoy (#8569 )	4 years ago
R.B. Boyer	c599a2f5f4	xds: add support for envoy 1.15.0 and drop support for 1.11.x (#8424 ) Related changes: - hard-fail the xDS connection attempt if the envoy version is known to be too old to be supported - remove the RouterMatchSafeRegex proxy feature since all supported envoy versions have it - stop using --max-obj-name-len (due to: envoyproxy/envoy#11740)	4 years ago
Hans Hasselberg	496fb5fc5b	add support for envoy 1.14.4, 1.13.4, 1.12.6 (#8216 )	4 years ago
R.B. Boyer	1eef096dfe	xds: version sniff envoy and switch regular expressions from 'regex' to 'safe_regex' on newer envoy versions (#8222 ) - cut down on extra node metadata transmission - split the golden file generation to compare all envoy version	4 years ago
Chris Piraino	735337b170	Append port number to ingress host domain (#8190 ) A port can be sent in the Host header as defined in the HTTP RFC, so we take any hosts that we want to match traffic to and also add another host with the listener port added. Also fix an issue with envoy integration tests not running the case-ingress-gateway-tls test.	4 years ago
Freddy	cc1407e867	Merge http2 integration test case into grpc case (#8164 ) http2 is covered by grpc since grpc uses http2	4 years ago
Hans Hasselberg	e62a43c6cf	Support envoy 1.14.2, 1.13.2, 1.12.4 (#8057 )	5 years ago
Chris Piraino	1a853fc954	Always require Host header values for http services (#7990 ) Previously, we did not require the 'service-name.' host header value when on a single http service was exposed. However, this allows a user to get into a situation where, if they add another service to the listener, suddenly the previous service's traffic might not be routed correctly. Thus, we always require the Host header, even if there is only 1 service. Also, we add the make the default domain matching more restrictive by matching "service-name.ingress." by default. This lines up better with the namespace case and more accurately matches the Consul DNS value we expect people to use in this case.	5 years ago
Freddy	9ed325ba8b	Enable gateways to resolve hostnames to IPv4 addresses (#7999 ) The DNS resolution will be handled by Envoy and defaults to LOGICAL_DNS. This discovery type can be overridden on a per-gateway basis with the envoy_dns_discovery_type Gateway Option. If a service contains an instance with a hostname as an address we set the Envoy cluster to use DNS as the discovery type rather than EDS. Since both mesh gateways and terminating gateways route to clusters using SNI, whenever there is a mix of hostnames and IP addresses associated with a service we use the hostname + CDS rather than the IPs + EDS. Note that we detect hostnames by attempting to parse the service instance's address as an IP. If it is not a valid IP we assume it is a hostname.	5 years ago
Daniel Nephin	0a75d32e3e	ci: fix log capture for envoy integration tests The previous change, which moved test running to Go, appears to have broken log capturing. I am not entirely sure why, but the run_tests function seems to exit on the first error. This change moves test teardown and log capturing out of run_test, and has the go test runner call them when necessary.	5 years ago
Daniel Nephin	e02ee13657	Make envoy integration tests a `go test` suite (#7842 ) * test/integration: only run against 1 envoy version These tests are slow enough that it seems unlikely that anyone is running multiple versions locally. If someone wants to, a for loop outside of run_test.sh should do the right thing. Remove unused vars. * Remove logic to iterate over test cases, run a single case * Add a golang runner for integration tests * Use build tags for envoy integration tests And add junit-xml report	5 years ago
Chris Piraino	646902621b	Set default protocol to http in TLS integration test	5 years ago
Daniel Nephin	5655d7f34e	Add outlier_detection check to integration test Fix decoding of time.Duration types.	5 years ago
Chris Piraino	5105bf3d67	Require individual services in ingress entry to match protocols (#7774 ) We require any non-wildcard services to match the protocol defined in the listener on write, so that we can maintain a consistent experience through ingress gateways. This also helps guard against accidental misconfiguration by a user. - Update tests that require an updated protocol for ingress gateways	5 years ago
Kyle Havlovitz	b2a0251f66	Add a check for custom host to ingress TLS integration test	5 years ago
Kyle Havlovitz	d452769d92	Add TLS integration test for ingress gateway - Pull Consul Root CA from API in order to verify certificate chain - Assert on the DNSSAN as well to ensure it is correct	5 years ago
Kyle Havlovitz	f14c54e25e	Add TLS option and DNS SAN support to ingress config xds: Only set TLS context for ingress listener when requested	5 years ago
Chris Piraino	f40833d094	Allow Hosts field to be set on an ingress config entry - Validate that this cannot be set on a 'tcp' listener nor on a wildcard service. - Add Hosts field to api and test in consul config write CLI - xds: Configure envoy with user-provided hosts from ingress gateways	5 years ago
Kyle Havlovitz	247f9eaf13	Allow ingress gateways to route traffic based on Host header This commit adds the necessary changes to allow an ingress gateway to route traffic from a single defined port to multiple different upstream services in the Consul mesh. To do this, we now require all HTTP requests coming into the ingress gateway to specify a Host header that matches "<service-name>.*" in order to correctly route traffic to the correct service. - Differentiate multiple listener's route names by port - Adds a case in xds for allowing default discovery chains to create a route configuration when on an ingress gateway. This allows default services to easily use host header routing - ingress-gateways have a single route config for each listener that utilizes domain matching to route to different services.	5 years ago
freddygv	eddd5bd73b	PR comments	5 years ago
freddygv	2a85e44519	Add envoy integration tests	5 years ago
Chris Piraino	ecc8a2d6f7	Allow ingress gateways to route through mesh gateways - Adds integration test for mesh gateways local + remote modes with ingress - ingress golden files updated for mesh gateway endpoints	5 years ago
Kyle Havlovitz	e7b1ee55de	Add http routing support and integration test to ingress gateways	5 years ago
Kyle Havlovitz	e9e8c0e730	Ingress Gateways for TCP services (#7509 ) * Implements a simple, tcp ingress gateway workflow This adds a new type of gateway for allowing Ingress traffic into Connect from external services. Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>	5 years ago
Pierre Souchay	2199a134a0	More tolerant assert_alive_wan_member_count to fix unstable tests Example of failure (very frequent): https://circleci.com/gh/hashicorp/consul/157985	5 years ago
Hans Hasselberg	66415be90e	connect: support envoy 1.14.1 (#7624 )	5 years ago
Chris Piraino	584f90bbeb	Fix flapping of mesh gateway connect-service watches (#7575 )	5 years ago
Pierre Souchay	eafe9a895a	tests: fixed bats warning (#7544 ) This fixes this bats warning: duplicate test name(s) in /workdir/primary/bats/verify.bats: test_s1_upstream_made_1_connection Test was already defined at line 42, rename it to avoid test name duplication	5 years ago
Hans Hasselberg	6a49a42e98	connect: support for envoy 1.13.1 and 1.12.3 (#7380 ) * setup new envoy versions for CI * bump version on the website too.	5 years ago
R.B. Boyer	6adad71125	wan federation via mesh gateways (#6884 ) This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the agent and the results of that operation for primary mesh gateways are needed in the server there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.	5 years ago
Matt Keeler	0041102e29	Change where the envoy snapshots get put when a test fails (#7298 ) This will allow us to capture them in CI	5 years ago
Hans Hasselberg	9cb7adb304	add envoy version 1.12.2 and 1.13.0 to the matrix (#7240 ) * add 1.12.2 * add envoy 1.13.0 * Introduce -envoy-version to get 1.10.0 passing. * update old version and fix consul-exec case * add envoy_version and fix check * Update Envoy CLI tests to account for the 1.13 compatibility changes. Co-authored-by: Matt Keeler <mkeeler@users.noreply.github.com>	5 years ago
Paschalis Tsilias	a335aa57c5	Expose Envoy's /stats for statsd agents (#7173 ) * Expose Envoy /stats for statsd agents; Add testcases * Remove merge conflict leftover * Add support for prefix instead of path; Fix docstring to mirror these changes * Add new config field to docs; Add testcases to check that /stats/prometheus is exposed as well * Parametrize matchType (prefix or path) and value * Update website/source/docs/connect/proxies/envoy.md Co-Authored-By: Paul Banks <banks@banksco.de> Co-authored-by: Paul Banks <banks@banksco.de>	5 years ago
Matt Keeler	bfc03ec587	Fix a couple bugs regarding intentions with namespaces (#7169 )	5 years ago
Matt Keeler	c09693e545	Updates to Config Entries and Connect for Namespaces (#7116 )	5 years ago
Chris Piraino	f3b54fa535	Allow configuration of upstream connection limits in Envoy (#6829 ) * Adds 'limits' field to the upstream configuration of a connect proxy This allows a user to configure the envoy connect proxy with 'max_connections', 'max_queued_requests', and 'max_concurrent_requests'. These values are defined in the local proxy on a per-service instance basis and should thus NOT be thought of as a global-level or even service-level value.	5 years ago
R.B. Boyer	2011f3d7dc	xds: mesh gateway CDS requests are now allowed to receive an empty CDS reply (#6787 ) This is the rest of the fix for #6543 that was incompletely fixed in #6576.	5 years ago
Paul Banks	87699eca2f	Fix support for RSA CA keys in Connect. (#6638 ) * Allow RSA CA certs for consul and vault providers to correctly sign EC leaf certs. * Ensure key type ad bits are populated from CA cert and clean up tests * Add integration test and fix error when initializing secondary CA with RSA key. * Add more tests, fix review feedback * Update docs with key type config and output * Apply suggestions from code review Co-Authored-By: R.B. Boyer <rb@hashicorp.com>	5 years ago
R.B. Boyer	8dcba472a2	xds: tcp services using the discovery chain should not assume RDS during LDS (#6623 ) Previously the logic for configuring RDS during LDS for L7 upstreams was overapplied to TCP proxies resulting in a cluster name of <emptystring> being used incorrectly. Fixes #6621	5 years ago
Freddy	fdd10dd8b8	Expose HTTP-based paths through Connect proxy (#6446 ) Fixes: #5396 This PR adds a proxy configuration stanza called expose. These flags register listeners in Connect sidecar proxies to allow requests to specific HTTP paths from outside of the node. This allows services to protect themselves by only listening on the loopback interface, while still accepting traffic from non Connect-enabled services. Under expose there is a boolean checks flag that would automatically expose all registered HTTP and gRPC check paths. This stanza also accepts a paths list to expose individual paths. The primary use case for this functionality would be to expose paths for third parties like Prometheus or the kubelet. Listeners for requests to exposed paths are be configured dynamically at run time. Any time a proxy, or check can be registered, a listener can also be created. In this initial implementation requests to these paths are not authenticated/encrypted.	5 years ago

1 2

99 Commits (e9479175a463acc57d2b3e4a83a6db67288c6c61)