consul

Commit Graph

Author	SHA1	Message	Date
R.B. Boyer	06848ce67e	fix broken golden tests	4 years ago
Yong Wen Chua	409768d6e5	Merge branch 'master' of github.com:hashicorp/consul into tg-rewrite	4 years ago
R.B. Boyer	398b766532	xds: default to speaking xDS v3, but allow for v2 to be spoken upon request (#9658 ) - Also add support for envoy 1.17.0	4 years ago
R.B. Boyer	be89557fb4	test: omit envoy golden test files that differ from the latest version (#9807 ) Since we currently do no version switching this removes 75% of the PR noise. To generate all *.golden files were removed and then I ran: go test ./agent/xds -update	4 years ago
Yong Wen Chua	58b553704a	Update test fixtures	4 years ago
R.B. Boyer	3b6ffc447b	xds: remove deprecated usages of xDS (#9602 ) Note that this does NOT upgrade to xDS v3. That will come in a future PR. Additionally: - Ignored staticcheck warnings about how github.com/golang/protobuf is deprecated. - Shuffled some agent/xds imports in advance of a later xDS v3 upgrade. - Remove support for envoy 1.13.x but don't add in 1.17.x yet. We have to wait until the xDS v3 support is added in a follow-up PR. Fixes #8425	4 years ago
R.B. Boyer	a2c50d3303	connect: add support for envoy 1.16.0, drop support for 1.12.x, and bump point releases as well (#8944 ) Supported versions will be: "1.16.0", "1.15.2", "1.14.5", "1.13.6"	4 years ago
freddygv	768dbaa68d	Add session flag to cookie config	4 years ago
freddygv	00f2794bfa	Update golden files after default route fix for tgw	4 years ago
freddygv	63f79e5f9b	Restructure structs and other PR comments	4 years ago
freddygv	28d0602fc1	Pass LB config to Envoy via xDS	4 years ago
R.B. Boyer	c599a2f5f4	xds: add support for envoy 1.15.0 and drop support for 1.11.x (#8424 ) Related changes: - hard-fail the xDS connection attempt if the envoy version is known to be too old to be supported - remove the RouterMatchSafeRegex proxy feature since all supported envoy versions have it - stop using --max-obj-name-len (due to: envoyproxy/envoy#11740)	4 years ago
R.B. Boyer	1eef096dfe	xds: version sniff envoy and switch regular expressions from 'regex' to 'safe_regex' on newer envoy versions (#8222 ) - cut down on extra node metadata transmission - split the golden file generation to compare all envoy version	4 years ago
Chris Piraino	735337b170	Append port number to ingress host domain (#8190 ) A port can be sent in the Host header as defined in the HTTP RFC, so we take any hosts that we want to match traffic to and also add another host with the listener port added. Also fix an issue with envoy integration tests not running the case-ingress-gateway-tls test.	4 years ago
Chris Piraino	1a853fc954	Always require Host header values for http services (#7990 ) Previously, we did not require the 'service-name.' host header value when on a single http service was exposed. However, this allows a user to get into a situation where, if they add another service to the listener, suddenly the previous service's traffic might not be routed correctly. Thus, we always require the Host header, even if there is only 1 service. Also, we add the make the default domain matching more restrictive by matching "service-name.ingress." by default. This lines up better with the namespace case and more accurately matches the Consul DNS value we expect people to use in this case.	5 years ago
Chris Piraino	881760f701	xds: Use only the port number as the configured route name This removes duplication of protocol from the stats_prefix	5 years ago
Chris Piraino	f40833d094	Allow Hosts field to be set on an ingress config entry - Validate that this cannot be set on a 'tcp' listener nor on a wildcard service. - Add Hosts field to api and test in consul config write CLI - xds: Configure envoy with user-provided hosts from ingress gateways	5 years ago
Kyle Havlovitz	247f9eaf13	Allow ingress gateways to route traffic based on Host header This commit adds the necessary changes to allow an ingress gateway to route traffic from a single defined port to multiple different upstream services in the Consul mesh. To do this, we now require all HTTP requests coming into the ingress gateway to specify a Host header that matches "<service-name>.*" in order to correctly route traffic to the correct service. - Differentiate multiple listener's route names by port - Adds a case in xds for allowing default discovery chains to create a route configuration when on an ingress gateway. This allows default services to easily use host header routing - ingress-gateways have a single route config for each listener that utilizes domain matching to route to different services.	5 years ago
Chris Piraino	cb9df538d5	Add all the xds ingress tests This commit copies many of the connect-proxy xds testcases and reuses for ingress gateways. This allows us to more easily see changes to the envoy configuration when make updates to ingress gateways.	5 years ago
Chris Piraino	47ff532735	Fixes envoy config when both RetryOn* values are set (#7280 )	5 years ago
R.B. Boyer	ae79cdab1b	connect: introduce ExternalSNI field on service-defaults (#6324 ) Compiling this will set an optional SNI field on each DiscoveryTarget. When set this value should be used for TLS connections to the instances of the target. If not set the default should be used. Setting ExternalSNI will disable mesh gateway use for that target. It also disables several service-resolver features that do not make sense for an external service.	5 years ago
R.B. Boyer	72207256b9	xds: improve how envoy metrics are emitted (#6312 ) Since generated envoy clusters all are named using (mostly) SNI syntax we can have envoy read the various fields out of that structure and emit it as stats labels to the various telemetry backends. I changed the delimiter for the 'customization hash' from ':' to '~' because ':' is always reencoded by envoy as '_' when generating metrics keys.	5 years ago
R.B. Boyer	8e22d80e35	connect: fix failover through a mesh gateway to a remote datacenter (#6259 ) Failover is pushed entirely down to the data plane by creating envoy clusters and putting each successive destination in a different load assignment priority band. For example this shows that normally requests go to 1.2.3.4:8080 but when that fails they go to 6.7.8.9:8080: - name: foo load_assignment: cluster_name: foo policy: overprovisioning_factor: 100000 endpoints: - priority: 0 lb_endpoints: - endpoint: address: socket_address: address: 1.2.3.4 port_value: 8080 - priority: 1 lb_endpoints: - endpoint: address: socket_address: address: 6.7.8.9 port_value: 8080 Mesh gateways route requests based solely on the SNI header tacked onto the TLS layer. Envoy currently only lets you configure the outbound SNI header at the cluster layer. If you try to failover through a mesh gateway you ideally would configure the SNI value per endpoint, but that's not possible in envoy today. This PR introduces a simpler way around the problem for now: 1. We identify any target of failover that will use mesh gateway mode local or remote and then further isolate any resolver node in the compiled discovery chain that has a failover destination set to one of those targets. 2. For each of these resolvers we will perform a small measurement of comparative healths of the endpoints that come back from the health API for the set of primary target and serial failover targets. We walk the list of targets in order and if any endpoint is healthy we return that target, otherwise we move on to the next target. 3. The CDS and EDS endpoints both perform the measurements in (2) for the affected resolver nodes. 4. For CDS this measurement selects which TLS SNI field to use for the cluster (note the cluster is always going to be named for the primary target) 5. For EDS this measurement selects which set of endpoints will populate the cluster. Priority tiered failover is ignored. One of the big downsides to this approach to failover is that the failover detection and correction is going to be controlled by consul rather than deferring that entirely to the data plane as with the prior version. This also means that we are bound to only failover using official health signals and cannot make use of data plane signals like outlier detection to affect failover. In this specific scenario the lack of data plane signals is ok because the effectiveness is already muted by the fact that the ultimate destination endpoints will have their data plane signals scrambled when they pass through the mesh gateway wrapper anyway so we're not losing much. Another related fix is that we now use the endpoint health from the underlying service, not the health of the gateway (regardless of failover mode).	5 years ago
R.B. Boyer	6393edba53	connect: reconcile how upstream configuration works with discovery chains (#6225 ) * connect: reconcile how upstream configuration works with discovery chains The following upstream config fields for connect sidecars sanely integrate into discovery chain resolution: - Destination Namespace/Datacenter: Compilation occurs locally but using different default values for namespaces and datacenters. The xDS clusters that are created are named as they normally would be. - Mesh Gateway Mode (single upstream): If set this value overrides any value computed for any resolver for the entire discovery chain. The xDS clusters that are created may be named differently (see below). - Mesh Gateway Mode (whole sidecar): If set this value overrides any value computed for any resolver for the entire discovery chain. If this is specifically overridden for a single upstream this value is ignored in that case. The xDS clusters that are created may be named differently (see below). - Protocol (in opaque config): If set this value overrides the value computed when evaluating the entire discovery chain. If the normal chain would be TCP or if this override is set to TCP then the result is that we explicitly disable L7 Routing and Splitting. The xDS clusters that are created may be named differently (see below). - Connect Timeout (in opaque config): If set this value overrides the value for any resolver in the entire discovery chain. The xDS clusters that are created may be named differently (see below). If any of the above overrides affect the actual result of compiling the discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op override to "tcp") then the relevant parameters are hashed and provided to the xDS layer as a prefix for use in naming the Clusters. This is to ensure that if one Upstream discovery chain has no overrides and tangentially needs a cluster named "api.default.XXX", and another Upstream does have overrides for "api.default.XXX" that they won't cross-pollinate against the operator's wishes. Fixes #6159	5 years ago
R.B. Boyer	ad9e7b6ae9	connect: allow L7 routers to match on http methods (#6164 ) Fixes #6158	5 years ago
R.B. Boyer	85cf2706e6	connect: change router syntax for matching query parameters to resemble the syntax for matching paths and headers for consistency. (#6163 ) This is a breaking change, but only in the context of the beta series.	5 years ago
R.B. Boyer	d7a5158805	xds: allow http match criteria to be applied to routes on services using grpc protocols (#6149 )	5 years ago
R.B. Boyer	bcd2de3a2e	implement some missing service-router features and add more xDS testing (#6065 ) - also implement OnlyPassing filters for non-gateway clusters	5 years ago

28 Commits (e19aef45cb5c60c44b2cc6846d759e9f01290be2)