67 Commits (e14b4301fad9b41a7fabda0e3b1f00fb1ca09995)

Author	SHA1	Message	Date
Luke Kysow	fbd47e1161	config entry: hardcode proxy-defaults name as global (#14833) ... * config entry: hardcode proxy-defaults name as global proxy-defaults can only have the name global. Because of this, we support not even setting the name in the config file: ``` kind = "proxy-defaults" ``` Previously, writing this would result in the output: ``` Config entry written: proxy-defaults/ ``` Now it will output: ``` Config entry written: proxy-defaults/global ``` This change follows what was done for the new Mesh config entry.	2 years ago
cskh	cf6b6dddaf	feat(cli): enable to delete config entry from an input file (#13677) ... * feat(cli): enable to delete config entry from an input file - A new flag to config delete to delete a config entry in a valid config file, e.g., config delete -filename intention-allow.hcl - Updated flag validation; -filename and -kind can't be set at the same time - Move decode config entry method from config_write.go to helpers.go for reusing ParseConfigEntry() - add changelog Co-authored-by: Dan Upton <daniel@floppy.co>	2 years ago
Dhia Ayachi	1b779240ae	update gateway-services table with endpoints (#13217) ... * update gateway-services table with endpoints * fix failing test * remove unneeded config in test * rename "endpoint" to "destination" * more endpoint renaming to destination in tests * update isDestination based on service-defaults config entry creation * use a 3 state kind to be able to set the kind to unknown (when neither a service or a destination exist) * set unknown state to empty to avoid modifying alot of tests * fix logic to set the kind correctly on CRUD * fix failing tests * add missing tests and fix service delete * fix failing test * Apply suggestions from code review Co-authored-by: Dan Stough <dan.stough@hashicorp.com> * fix a bug with kind and add relevant test * fix compile error * fix failing tests * add kind to clone * fix failing tests * fix failing tests in catalog endpoint * fix service dump test * Apply suggestions from code review Co-authored-by: Dan Stough <dan.stough@hashicorp.com> * remove duplicate tests * rename consts and fix kind when no destination is defined in the service-defaults. * rename Kind to ServiceKind and change switch to use .(type) Co-authored-by: Dan Stough <dan.stough@hashicorp.com>	3 years ago
DanStough	817449041d	chore(test): Update bats version	3 years ago
Mark Anderson	6430af1c0e	Update mesh config tests ... Signed-off-by: Mark Anderson <manderson@hashicorp.com>	3 years ago
R.B. Boyer	1a491886fa	structs: ensure exported-services PeerName field can be addressed as peer_name (#12862)	3 years ago
R.B. Boyer	e79ce8ab03	xds: adding control of the mesh-wide min/max TLS versions and cipher suites from the mesh config entry (#12601) ... - `tls.incoming`: applies to the inbound mTLS targeting the public listener on `connect-proxy` and `terminating-gateway` envoy instances - `tls.outgoing`: applies to the outbound mTLS dialing upstreams from `connect-proxy` and `ingress-gateway` envoy instances Fixes #11966	3 years ago
Mike Morris	1b1a97e8f9	ingress: allow setting TLS min version and cipher suites in ingress gateway config entries (#11576) ... * xds: refactor ingress listener SDS configuration * xds: update resolveListenerSDS call args in listeners_test * ingress: add TLS min, max and cipher suites to GatewayTLSConfig * xds: implement envoyTLSVersions and envoyTLSCipherSuites * xds: merge TLS config * xds: configure TLS parameters with ingress TLS context from leaf * xds: nil check in resolveListenerTLSConfig validation * xds: nil check in makeTLSParameters* functions * changelog: add entry for TLS params on ingress config entries * xds: remove indirection for TLS params in TLSConfig structs * xds: return tlsContext, nil instead of ambiguous err Co-authored-by: Chris S. Kim <ckim@hashicorp.com> * xds: switch zero checks to types.TLSVersionUnspecified * ingress: add validation for ingress config entry TLS params * ingress: validate listener TLS config * xds: add basic ingress with TLS params tests * xds: add ingress listeners mixed TLS min version defaults precedence test * xds: add more explicit tests for ingress listeners inheriting gateway defaults * xds: add test for single TLS listener on gateway without TLS defaults * xds: regen golden files for TLSVersionInvalid zero value, add TLSVersionAuto listener test * types/tls: change TLSVersion to string * types/tls: update TLSCipherSuite to string type * types/tls: implement validation functions for TLSVersion and TLSCipherSuites, make some maps private * api: add TLS params to GatewayTLSConfig, add tests * api: add TLSMinVersion to ingress gateway config entry test JSON * xds: switch to Envoy TLS cipher suite encoding from types package * xds: fixup validation for TLSv1_3 min version with cipher suites * add some kitchen sink tests and add a missing struct tag * xds: check if mergedCfg.TLSVersion is in TLSVersionsWithConfigurableCipherSuites * xds: update connectTLSEnabled comment * xds: remove unsued resolveGatewayServiceTLSConfig function * xds: add makeCommonTLSContextFromLeafWithoutParams * types/tls: add LessThan comparator function for concrete values * types/tls: change tlsVersions validation map from string to TLSVersion keys * types/tls: remove unused envoyTLSCipherSuites * types/tls: enable chacha20 cipher suites for Consul agent * types/tls: remove insecure cipher suites from allowed config TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 and TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 are both explicitly listed as insecure and disabled in the Go source. Refs https://cs.opensource.google/go/go/+/refs/tags/go1.17.3:src/crypto/tls/cipher_suites.go;l=329-330 * types/tls: add ValidateConsulAgentCipherSuites function, make direct lookup map private * types/tls: return all unmatched cipher suites in validation errors * xds: check that Envoy API value matching TLS version is found when building TlsParameters * types/tls: check that value is found in map before appending to slice in MarshalEnvoyTLSCipherSuiteStrings * types/tls: cast to string rather than fmt.Printf in TLSCihperSuite.String() * xds: add TLSVersionUnspecified to list of configurable cipher suites * structs: update note about config entry warning * xds: remove TLS min version cipher suite unconfigurable test placeholder * types/tls: update tests to remove assumption about private map values Co-authored-by: R.B. Boyer <rb@hashicorp.com>	3 years ago
freddygv	9b44861ce4	Update api module and decoding tests	3 years ago
freddygv	ed6076db26	Rename partition-exports to exported-services ... Using a name less tied to partitions gives us more flexibility to use this config entry in OSS for exports between datacenters/meshes.	3 years ago
Daniel Upton	d47b7311b8	Support Check-And-Set deletion of config entries (#11419) ... Implements #11372	3 years ago
freddygv	5c24ed61a8	Rename service-exports to partition-exports ... Existing config entries prefixed by service- are specific to individual services. Since this config entry applies to partitions it is being renamed. Additionally, the Partition label was changed to Name because using Partition at the top-level and in the enterprise meta was leading to the enterprise meta partition being dropped by msgpack.	3 years ago
Kyle Havlovitz	04cd2c983e	Add new service-exports config entry	3 years ago
R.B. Boyer	b0657973f2	add partition cli flag to all cli commands that have namespace flag (#10668)	3 years ago
Freddy	ffb13f35f1	Rename CatalogDestinationsOnly (#10397) ... CatalogDestinationsOnly is a passthrough that would enable dialing addresses outside of Consul's catalog. However, when this flag is set to true only _connect_ endpoints for services can be dialed. This flag is being renamed to signal that non-Connect endpoints can't be dialed by transparent proxies when the value is set to true.	4 years ago
Freddy	429f9d8bb8	Add flag for transparent proxies to dial individual instances (#10329)	4 years ago
Daniel Nephin	a07a58a873	config-entry: use custom MarshalJSON for mesh type ... So that the Kind field is added to the JSON object.	4 years ago
Daniel Nephin	62efaaab21	config-entry: remove Kind and Name field from Mesh config entry ... No config entry needs a Kind field. It is only used to determine the Go type to target. As we introduce new config entries (like this one) we can remove the kind field and have the GetKind method return the single supported value. In this case (similar to proxy-defaults) the Name field is also unnecessary. We always use the same value. So we can omit the name field entirely.	4 years ago
Freddy	078c40425f	Rename "cluster" config entry to "mesh" (#10127) ... This config entry is being renamed primarily because in k8s the name cluster could be confusing given that the config entry applies across federated datacenters. Additionally, this config entry will only apply to Consul as a service mesh, so the more generic "cluster" name is not needed.	4 years ago
R.B. Boyer	4db8b78854	connect: update centralized upstreams representation in service-defaults (#10015)	4 years ago
freddygv	7cb3f32672	Convert new tproxy structs in api module into ptrs ... This way we avoid serializing these when empty. Otherwise users of the latest version of the api submodule cannot interact with older versions of Consul, because a new api client would send keys that the older Consul doesn't recognize yet.	4 years ago
freddygv	7bd51ff536	Replace TransparentProxy bool with ProxyMode ... This PR replaces the original boolean used to configure transparent proxy mode. It was replaced with a string mode that can be set to: - "": Empty string is the default for when the setting should be defaulted from other configuration like config entries. - "direct": Direct mode is how applications originally opted into the mesh. Proxy listeners need to be dialed directly. - "transparent": Transparent mode enables configuring Envoy as a transparent proxy. Traffic must be captured and redirected to the inbound and outbound listeners. This PR also adds a struct for transparent proxy specific configuration. Initially this is not stored as a pointer. Will revisit that decision before GA.	4 years ago
freddygv	ab752c1c86	Avoid sending zero-value upstream defaults from api	4 years ago
R.B. Boyer	499fee73b3	connect: add toggle to globally disable wildcard outbound network access when transparent proxy is enabled (#9973) ... This adds a new config entry kind "cluster" with a single special name "cluster" where this can be controlled.	4 years ago
Freddy	8207b832df	Add TransparentProxy option to proxy definitions	4 years ago
freddygv	8b46d8dcbb	Restore old Envoy prefix on escape hatches ... This is done because after removing ID and NodeName from ServiceConfigRequest we will no longer know whether a request coming in is for a Consul client earlier than v1.10.	4 years ago
freddygv	6fd30d0384	Add TransparentProxy opt to proxy definition	4 years ago
freddygv	e3dc2a49df	Turn Limits and PassiveHealthChecks into pointers	4 years ago
freddygv	87cde19b4c	Create new types for service-defaults upstream cfg	4 years ago
Daniel Nephin	b9e60c0775	testing: skip slow tests with -short ... Add a skip condition to all tests slower than 100ms. This change was made using `gotestsum tool slowest` with data from the last 3 CI runs of master. See https://github.com/gotestyourself/gotestsum#finding-and-skipping-slow-tests With this change: ``` $ time go test -count=1 -short ./agent ok github.com/hashicorp/consul/agent 0.743s real 0m4.791s $ time go test -count=1 -short ./agent/consul ok github.com/hashicorp/consul/agent/consul 4.229s real 0m8.769s ```	4 years ago
R.B. Boyer	1b413b0444	connect: support defining intentions using layer 7 criteria (#8839) ... Extend Consul’s intentions model to allow for request-based access control enforcement for HTTP-like protocols in addition to the existing connection-based enforcement for unspecified protocols (e.g. tcp).	4 years ago
R.B. Boyer	a2a8e9c783	connect: intentions are now managed as a new config entry kind "service-intentions" (#8834) ... - Upgrade the ConfigEntry.ListAll RPC to be kind-aware so that older copies of consul will not see new config entries it doesn't understand replicate down. - Add shim conversion code so that the old API/CLI method of interacting with intentions will continue to work so long as none of these are edited via config entry endpoints. Almost all of the read-only APIs will continue to function indefinitely. - Add new APIs that operate on individual intentions without IDs so that the UI doesn't need to implement CAS operations. - Add a new serf feature flag indicating support for intentions-as-config-entries. - The old line-item intentions way of interacting with the state store will transparently flip between the legacy memdb table and the config entry representations so that readers will never see a hiccup during migration where the results are incomplete. It uses a piece of system metadata to control the flip. - The primary datacenter will begin migrating intentions into config entries on startup once all servers in the datacenter are on a version of Consul with the intentions-as-config-entries feature flag. When it is complete the old state store representations will be cleared. We also record a piece of system metadata indicating this has occurred. We use this metadata to skip ALL of this code the next time the leader starts up. - The secondary datacenters continue to run the old intentions replicator until all servers in the secondary DC and primary DC support intentions-as-config-entries (via serf flag). Once this condition it met the old intentions replicator ceases. - The secondary datacenters replicate the new config entries as they are migrated in the primary. When they detect that the primary has zeroed it's old state store table it waits until all config entries up to that point are replicated and then zeroes its own copy of the old state store table. We also record a piece of system metadata indicating this has occurred. We use this metadata to skip ALL of this code the next time the leader starts up.	4 years ago
freddygv	7b9d1b41d5	Resolve conflicts against master	4 years ago
freddygv	768dbaa68d	Add session flag to cookie config	4 years ago
freddygv	eab90ea9fa	Revert EnvoyConfig nesting	4 years ago
freddygv	cf018cb2e0	Fixup stray LB infix refs	4 years ago
freddygv	f81fe6a1a1	Remove LB infix and move injection to xds	4 years ago
R.B. Boyer	119e945c3e	connect: all config entries pick up a meta field (#8596) ... Fixes #8595	4 years ago
freddygv	63f79e5f9b	Restructure structs and other PR comments	4 years ago
Daniel Nephin	16217fe9b9	testing: use t.Cleanup in testutil.TempFile ... So that it has the same behaviour as TempDir. Also remove the now unnecessary 'defer os.Remove'	4 years ago
Chris Piraino	ea683ebb6c	cli: Output message on success when writing/deleting entries (#7806) ... This provides a user with a better experience, knowing that the command worked appropriately. The output of the write/delete CLI commands are not going to be used in a bash script, in fact previously a success provided no ouput, so we do not have to worry about spurious text being injected into bash pipelines.	4 years ago
Daniel Nephin	068b43df90	Enable gofmt simplify ... Code changes done automatically with 'gofmt -s -w'	5 years ago
Daniel Nephin	75cbbe2702	config: add HookWeakDecodeFromSlice ... Currently opaque config blocks (config entries, and CA provider config) are modified by PatchSliceOfMaps, making it impossible for these opaque config sections to contain slices of maps. In order to fix this problem, any lazy-decoding of these blocks needs to support weak decoding of []map[string]interface{} to a struct type before PatchSliceOfMaps is replaces. This is necessary because these config blobs are persisted, and during an upgrade an older version of Consul could read one of the new configuration values, which would cause an error. To support the upgrade path, this commit first introduces the new hooks for weak decoding of []map[string]interface{} and uses them only in the lazy-decode paths. That way, in a future release, new style configuration will be supported by the older version of Consul. This decode hook has a number of advantages: 1. It no longer panics. It allows mapstructure to report the error 2. It no longer requires the user to declare which fields are slices of structs. It can deduce that information from the 'to' value. 3. It will make it possible to preserve opaque configuration, allowing for structured opaque config.	5 years ago
Daniel Nephin	6a2d7d77c0	config: use the new HookTranslateKeys instead of lib.TranslateKeys ... With the exception of CA provider config, which will be migrated at some later time.	5 years ago
Daniel Nephin	600645b5f9	Add unconvert linter ... To find unnecessary type convertions	5 years ago
Chris Piraino	0c22eacca8	Add TLS field to ingress API structs ... - Adds test in api and command/config/write packages	5 years ago
Chris Piraino	f40833d094	Allow Hosts field to be set on an ingress config entry ... - Validate that this cannot be set on a 'tcp' listener nor on a wildcard service. - Add Hosts field to api and test in consul config write CLI - xds: Configure envoy with user-provided hosts from ingress gateways	5 years ago
Chris Piraino	b73a13fc9e	Remove service_subset field from ingress config entry ... We decided that this was not a useful MVP feature, and just added unnecessary complexity	5 years ago
Freddy	137a2c32c6	TLS Origination for Terminating Gateways (#7671)	5 years ago
Freddy	aae14b3951	Add decode rules for Expose cfg in service-defaults (#7611)	5 years ago