101 Commits (dabb08de5156fec9932eefdd0a19fca53766bec9)

Author	SHA1	Message	Date
James Phillips	c01a3871c9	Adds support for snapshots and restores. (#2396) ... * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.	8 years ago
Felix	f0eb0ba549	return an error if no logOutput is provided ... Otherwise the code will panic at a later stage where it is more complicated to figure out what’s actually going on.	8 years ago
James Phillips	e5850d8a26	Adds new consul operator endpoint, CLI, and ACL and some basic Raft commands.	8 years ago
James Phillips	9f7a973ace	Adds an `X-Consul-Translate-Addresses` to signal translation is enabled.	8 years ago
James Phillips	f73166ced9	Installs a wrapper around HTTP endpoints that generate metrics.	8 years ago
James Phillips	d29af2ddc7	Adds an ACL replication status endpoint.	8 years ago
James Phillips	69f58ad04a	Moves txn code into a new endpoint, not specific to KV.	9 years ago
James Phillips	1fefdcb962	Terminates pretty responses with a newline.	9 years ago
James Phillips	e491245062	Performs basic plumbing of KVS transactions through all the layers.	9 years ago
James Phillips	7ebad899da	Adds a new PUT-based TTL check update endpoint.	9 years ago
James Phillips	e79dd7c8de	Fixes redirect from / to /ui when internal UI is enabled.	9 years ago
Chris Cooper	e2065e10c0	add comment codes	9 years ago
Chris Cooper	00dd9d6b78	refactors http server error codes to use the http statuses defined in the http package instead of literals	9 years ago
Philippe M. Chiasson	a2eddcab38	remove address splitting	9 years ago
Philippe M. Chiasson	21345a8a7f	Move logged client IP to the end of the log message	9 years ago
Philippe M. Chiasson	34c36d9205	Merge branch 'master' of http://github.com/hashicorp/consul into issue/1447/http-access-logs	9 years ago
Ryan Uber	3cf6a173a5	agent: static UI is configurable	9 years ago
Ryan Uber	c3e7c98da2	agent: compile web assets into consul binary	9 years ago
Philippe M. Chiasson	65512cae73	Add client ip to http access logs ... Fixes #1447	9 years ago
James Phillips	da20e6668b	Adds a note about obfuscating query name/ID from the logs.	9 years ago
James Phillips	57be55103c	Adds an HTTP endpoint for prepared queries.	9 years ago
James Phillips	d45fc23abf	Installs a friendly handler for coordinate endpoints when coordinates are disabled.	9 years ago
James Phillips	33e3505aea	Adds endpoints for raw network coordinates.	9 years ago
James Phillips	9c9195746f	Changes ?near=self to a safer ?near=_agent, which is also clearer about what it does.	9 years ago
James Phillips	e47eea3f3a	Adds a magic "self" node name to distance queries.	9 years ago
James Phillips	89c7203f31	Adds coordinate sorting support to catalog queries for nodes and service nodes.	9 years ago
David Adams	b7bcb2a414	Add HTTP request header X-Consul-Token ... Add support for an X-Consul-Token HTTP request header to specify the token with which this request should be fulfilled. The header would have precedence over the responding Agent's default token, but would have lower precedence than a token specified in the query string.	9 years ago
Michael Puncel	a98d25b541	Add http method to log output	9 years ago
Armon Dadgar	52a8a95af9	agent: Always enable the UI endpoints	9 years ago
Ryan Uber	87c1e4fcd3	agent: document the scada http creation func	9 years ago
Ryan Uber	2e6ccded2c	agent: scada client and HTTP server are tracked separately	9 years ago
Ryan Uber	1b4167699f	agent: don't replace empty tokens in the logs, fixes #1020	10 years ago
Ryan Uber	507917748a	agent: parse raw query URL to avoid closing the request body early	10 years ago
Ryan Uber	ee5659858a	agent: hide tokens from logs and monitor	10 years ago
Armon Dadgar	847eaadc56	agent: Enable UI endpoints for SCADA	10 years ago
Armon Dadgar	c495a5434d	agent: Use AtlasACLToken	10 years ago
Armon Dadgar	b9cdb94f19	agent: Fixing setup of SCADA HTTP listener	10 years ago
Armon Dadgar	6a640604dd	agent: Fixing panic on shutdown	10 years ago
Armon Dadgar	456645f2fb	agent: SCADA HTTP listener	10 years ago
Ryan Uber	b5e8111485	agent/http: clean up socket setup	10 years ago
Armon Dadgar	cf04d6ae31	Merge pull request #622 from hashicorp/f-sockets ... Unix domain sockets	10 years ago
Ryan Uber	d9a3e673b0	agent: change node maintenance endpoint	10 years ago
Ryan Uber	21dd95d9af	agent: beginning socket user/group/mode support as discussed in #612	10 years ago
Ryan Uber	7748c62d09	agent: node maintenance mode works	10 years ago
Ryan Uber	2973cd9131	agent: first pass at service maintenance mode	10 years ago
Ryan Uber	f01bb5cf3b	agent: error if binding to existing socket file	10 years ago
Ryan Uber	bf48651c58	agent: only ignore errors on IsNotExist()	10 years ago
Ryan Uber	4675cdf01c	agent: beginning refactor	10 years ago
Jeff Mitchell	11a3ce0bdd	RPC and HTTP interfaces fully generically-sockified so Unix is supported. ... Client works for RPC; will honor CONSUL_RPC_ADDR. HTTP works via consul/api; honors CONSUL_HTTP_ADDR. The format of a Unix socket in configuration data is: "unix://[/path/to/socket];[username or uid];[gid];[mode]" Obviously, the user must have appropriate permissions to create the socket file in the given path and assign the requested uid/gid. Also note that Go does not support gid lookups from group name, so gid must be numeric. See https://codereview.appspot.com/101310044 When connecting from the client, the format is just the first part of the above line: "unix://[/path/to/socket]" This code is copyright 2014 Akamai Technologies, Inc. <opensource@akamai.com>	10 years ago
Armon Dadgar	f86d7c3a09	Merge pull request #558 from ceh/http-api-response-headers ... add ability to specify response headers on the HTTP API	10 years ago