* Add uri identifiers to all data source things and make them the same
1. Add uri identitifer to data-source service
2. Make <EventSource /> and <DataSource /> as close as possible
3. Add extra `.closed` method to get a list of inactive/closed/closing
data-sources from elsewhere
* Make the connections cleanup the least worst connection when required
* Pass the uri/request id through all the things
* Better user erroring
* Make event sources close on error
* Allow <DataLoader /> data slot to be configurable
* Allow the <DataWriter /> removed state to be configurable
* Don't error if meta is undefined
* Stitch together all the repositories into the data-source/sink
* Use data.source over repositories
* Add missing <EventSource /> components
* Fix up the views/templates
* Disable all the old route based blocking query things
* We still need the repo for the mixin for the moment
* Don't default to default, default != ''
In https://github.com/hashicorp/consul/pull/8065 we attempted to reduce
the amount of times that the UI requests the discovery chain endpoint
when connect is disabled on a datacenter.
Currently we can only tell if connect is disabled on a datacenter by
detecting a 500 error from a connect related endpoint.
In the above PR we mistakenly returned from a catch instead of
rethrowing the error, which meant that when a none 500 error was caught
the discovery chain data would be removed. Whilst at first glance this
doens't seem like a big problem due to the endpoint erroring, but we
also receive a 0 error when we abort endpoints during blocking queries.
This means that in certain cases we can remove cached data for the
discovery chain and then delay reloading it via a blocking query.
This PR replaces the return with a throw, which means that everything is
dealt with correctly via the blocking query error detection/logic.
* ui: Reduce discovery-chain log spam
Currently the only way that the UI can know whether connect is enabled
or not is whether we get 500 errors from certain endpoints.
One of these endpoints we already use, so aswell as recovering from a
500 error, we also remember that connect is disabled for the rest of the
page 'session' (so until the page is refreshed), and make no further
http requests to the endpoint for that specific datacenter.
This means that log spam is reduced to only 1 log per page refresh/dc
instead of 1 log per service navigation.
Longer term we'll need some way to dynamically discover whether connect
is enabled per datacenter without relying on something that will add
error logs to consul.
* Remove gateway endpoint adapter, model, and serializer and tests
* Update service tests to handle gateway-services-nodes
* Upgrade consul-api-double to 2.15.2
* Add a fairly temporary shouldReconcile method
Co-authored-by: John Cowen <jcowen@hashicorp.com>
* Fix to bottom border not applying to the correct <li>
* Create Linked Services tab with styling and tests
* Add internal endpoint gateway-services-nodes to the codebase with tests
* Upgrade consul-api-double to version 2.15.0
* ui: Adds model layer required for SSO
1. oidc-provider ember-data triplet plus repo, plus addition of torii
addon
2. Make blocking queries support a Cache-Control: no-cache header
3. Tweaks to the token model layer in preparation for SSO work
* Fix up meta related Cache-Control tests
* Add tests adapter tests for URL shapes
* Reset Cache-Control to the original value, return something from logout
* Make datacenter queries use query vs findAll like the rest of the app
* Make sure we have an element to pass to isInViewport
* Make sure href-mut doesn't error even if the currentRoute === null
* More post test cleanup and Safari fix (safari requires http:// URLs)
* Reverse order of datasource nspace/dc's and add a namespace source
* Rearrange routes/templates/controllers to only use HashicorpConsul once
* Add datasources and correct token namespace detection/redirection
* Remove old dc findAll adapter method
* Add more comments around the 'child route/parent controller' vars
* Add model layer support for filtering intentions by service
* Add Route, Controller and template for services.show.intentions tab
We are still loading the intentions themselves in the parent Route for
the moment
* Load the intentions in in the parent route for the moment
* Temporarily add support for returning to history -1
Once we have an intention form underneath the service/intention tab this
will no longer be needed
* Add the new tab and enable blocking queries for it
* Add some further acceptance testing around intention listings
* ui: Logout button
This commit adds an easier way to logout of the UI using a logout button
Notes:
- Added a Logout button to the main navigation when you are logged in,
meaning you have easy access to a way to log out of the UI.
- Changed all wording to use 'Log in/out' vocabulary instad of 'stop
using'.
- The logout button opens a panel to show you your current ACL
token and a logout button in order to logout.
- When using legacy ACLs we don't show the current ACL token as legacy
ACLs tokens only have secret values, whereas the new ACLs use a
non-secret ID plus a secret ID (that we don't show).
- We also added a new `<EmptyState />` component to use for all our
empty states. We currently only use this for the ACLs disabled screen to
provide more outgoing links to more readind material/documentation to
help you to understand and enable ACLs.
- The `<DataSink />` component is the sibling to our `<DataSource />`
component and whilst is much simpler (as it doesn't require polling
support), its tries to use the same code patterns for consistencies
sake.
- We had a fun problem with ember-data's `store.unloadAll` here, and in
the end went with `store.init` to empty the ember-data store instead due
to timing issues.
- We've tried to use already existing patterns in the Consul UI here
such as our preexisting `feedback` service, although these are likely to
change in the future. The thinking here is to add this feature with as
little change as possible.
Overall this is a precursor to a much larger piece of work centered on
auth in the UI. We figured this was a feature complete piece of work as
it is and thought it was worthwhile to PR as a feature on its own, which
also means the larger piece of work will be a smaller scoped PR also.
* v3.12.0...v3.16.0
* Upgrades
* Remove old wormhole fix
* Fixup ember power select (camelcasing)
* Fixup immedaitely closing dropdown
When clicking on the syntax selector, it seemed like an extra click
event was firing from the label, which then immediately closed the
dropdown. By adding a for="" attribute this event isn't passed to the
dropdown menu and therefore doesn't immediately close
* Fix up integration tests with new style (plus standardize titles)
* Temporarily disable some template linting rules
* Add required methods (even though they aren't used anywhere)
* Ensure event sources get closed on destruction
* ui: Ensure configuration is passed through to findInstanceBySlug
Due to the addition of namespace support, this arguments passed to this
method have been increased. Whilst the nspace support continues ot work
here, the configuration for blocking queries is never passed through.
This results in a 2 second poll rather than a blocking query.
This commit fixes that
* ui: Add a basic test to check the number of arguments passed through
For URL maintenance reasons we store the last visited DC in
localStorage incase you come back to a page (for example settings) that
doesn't have a dc in the URL.
A problem arises here if the last DC you tried to visit is unreachable.
The first fix here clears out the last visited DC from localStorage if
the API has errored out.
Secondly, our `href-mut` helper which mutates the current current and
replaces 'parts' in the URL rather than the whole thing functioned by
detecting the current route/URL you are on an 'mutating' that. A problem
arose here as even though you might be on the `/ui/dc-1/services` URL the
actual route is the 'error' route which does not have a URL that can be
changed properly.
The second fix here uses route.currentRoute.name over route.currentRouteName.
The latter is equal to error when an error occurs whereas the former gives you the name of the route before the error happened, which is actually what we want/the intent here.
ie. when `router.currentRouteName === 'error'` then
`router.currentRoute.name === Name Of Route Before It Errored` it seems
* Add data layer for discovery chain (model/adapter/serializer/repo)
* Add routing plus template for routing tab
* Add extra deps - consul-api-double upgrade plus ngraph for graphing
* Add discovery-chain and related components and helpers:
1. discovery-chain to orchestrate/view controller
2. route-card, splitter-card, resolver card to represent the 3 different
node types.
3. route-match helper for easy formatting of route rules
4. dom-position to figure out where things are in order to draw lines
5. svg-curve, simple wrapper around svg's <path d=""> attribute format.
6. data-structs service. This isn't super required but we are using
other data-structures provided by other third party npm modules in other
yet to be merged PRs. All of these types of things will live here for
easy access/injection/changability
7. Some additions to our css-var 'polyfill' for a couple of extra needed
rules
* Related CSS for discovery chain
1. We add a %card base component here, eventually this will go into our
base folder and %stats-card will also use it for a base component.
2. New icon for failovers
* ui: Discovery Chain Continued (#6939)
1. Add in the things we use for the animations
2 Use IntersectionObserver so we know when the tab is visible,
otherwise the dom-position helper won't work as the dom elements don't
have any display.
3. Add some base work for animations and use them a little
4. Try to detect if a resolver is a redirect. Right now this works for
datacenters and namespaces, but it can't work for services and subsets -
we are awaiting backend support for doing this properly.
5. Add a fake 'this service has no routes' route that says 'Default'
6. redirect icon
7. Add CSS.escape polyfill for Edge
Adds namespace support to the UI:
1. Namespace CRUD/management
2. Show Namespace in relevant areas (intentions, upstreams)
3. Main navigation bar improvements
4. Logic/integration to interact with a new `internal/acl/authorize` endpoint
## HTTPAdapter (#5637)
## Ember upgrade 2.18 > 3.12 (#6448)
### Proxies can no longer get away with not calling _super
This means that we can't use create anymore to define dynamic methods.
Therefore we dynamically make 2 extended Proxies on demand, and then
create from those. Therefore we can call _super in the init method of
the extended Proxies.
### We aren't allowed to reset a service anymore
We never actually need to now anyway, this is a remnant of the refactor
from browser based confirmations. We fix it as simply as possible here
but will revisit and remove the old browser confirm functionality at a
later date
### Revert classes to use ES5 style to workaround babel transp. probs
Using a mixture of ES6 classes (and hence super) and arrow functions
means that when babel transpiles the arrow functions down to ES5, a
reference to this is moved before the call to super, hence causing a js
error.
Furthermore, we the testing environment no longer lets use use
apply/call on the constructor.
These errors only manifests during testing (only in the testing
environment), the application itself runs fine with no problems without
this change.
Using ES5 style class definitions give us freedom to do all of the above
without causing any errors, so we reverted these classes back to ES5
class definitions
### Skip test that seems to have changed due to a change in RSVP timing
This test tests a usecase/area of the API that will probably never ever
be used, it was more testing out the API. We've skipped the test for now
as this doesn't affect the application itself, but left a note to come
back here later to investigate further
### Remove enumerableContentDidChange
Initial testing looks like we don't need to call this function anymore,
the function no longer exists
### Rework Changeset.isSaving to take into account new ember APIs
Setting/hanging a computedProperty of an instantiated object no longer
works. Move to setting it on the prototype/class definition instead
### Change how we detect whether something requires listening
New ember API's have changed how you can detect whether something is a
computedProperty or not. It's not immediately clear if its even possible
now. Therefore we change how we detect whether something should be
listened to or not by just looking for presence of `addEventListener`
### Potentially temporary change of ci test scripts to ensure deps exist
All our tooling scripts run through a Makefile (for people familiar with
only using those), which then call yarn scripts which can be called
independently (for people familar with only using yarn).
The Makefile targets always check to make sure all the dependencies are
installed before running anything that requires them (building, testing
etc).
The CI scripts/targets didn't follow this same route and called the yarn
scripts directly (usually CI builds a cache of the dependencies first).
For some reason this cache isn't doing what it usually does, and it
looks as though, in CI, ember isn't installed.
This commit makes the CI scripts consistently use the same method as all
of the other tooling scripts (Makefile target > Install Deps if
required > call yarn script). This should install the dependencies if
for some reason the CI cache building doesn't complete/isn't successful.
Potentially this commit may be reverted if, the root of the problem is
elsewhere, although consistency is always good, so it might be a good
idea to leave this commit as is even if we need to debug and fix things
elsewhere.
### Make test-parallel consistent with the rest of the tooling scripts
As we are here making changes for CI purposes (making test-ci
consistent), we spotted that test-parallel is also inconsistent and also
the README manual instructions won't work without `ember` installed
globally.
This commit makes everything consistent and changes the manual
instructions to use the local ember instance that gets installed via
yarn
### Re-wrangle catchable to fit with new ember 3.12 APIs
In the upgrade from ember 3.8 > 3.12 the public interfaces for
ComputedProperties have changed slightly. `meta` is no longer a public
property of ComputedProperty but of a ComputedDecoratorImpl mixin
instead.
7e4ba1096e/packages/%40ember/-internals/metal/lib/computed.ts (L725)
There seems to be no way, by just using publically available
methods, to replicate this behaviour so that we can create our own
'ComputedProperty` factory via injecting the ComputedProperty class as
we did previously.
3f333bada1/ui-v2/app/utils/computed/factory.js (L1-L18)
Instead we dynamically hang our `Catchable` `catch` method off the
instantiated ComputedProperty. In doing it like this `ComputedProperty`
has already has its `meta` method mixed in so we don't have to manually
mix it in ourselves (which doesn't seem possible)
This functionality is only used during our work in trying to ensure
our EventSource/BlockingQuery work was as 'ember-like' as possible (i.e.
using the traditional Route.model hooks and ember-like Controller
properties). Our ongoing/upcoming work on a componentized approach to
data a.k.a `<DataSource />` means we will be able to remove the majority
of the code involved here now that it seems to be under an amount of
flux in ember.
### Build bindata_assetfs.go with new UI changes
- yarn upgrade consul-api-double which includes `status/leader`
- add all the ember-data things required to call a new endpoint
- Pass the new leader variable through to the template
- use the new leader variable in the template to set a leader
- add acceptance testing to verify leaders are highlighted
- Change testing navigation/api requests to status/leader (on the node listing page, status/leader is now the last get request to
be called).
- Template whitespace commit (less indenting)
- adds a test to to assert no errors happen with an unelected leader
-Enable blocking queries by default
-Change assertion to check for the last PUT request, not just any request for session destruction from a node page.
Since we've now turned on blocking queries by default this means that a
second GET request is made after the PUT request that we are asserting
for but before the assertion itself, this meant the assertion failed. We
double checked this by turning off blocking queries for this test using
```
And settings from yaml
---
consul:client:
blocking: 0
---
```
which made the test pass again.
As moving forwards blocking queries will be on by default, we didn't
want to disable blocking queries for this test, so we now assert the
last PUT request specifically. This means we continue to assert that the
session has been destroyed but means we don't get into problems of
ordering of requests here
* ui: Reconciliate ember-data store when records are deleted via blocking
Currently we are barely using the ember-data store/cache, but it will
still cache records in the store even though technically we aren't using
it.
This adds a SyncTime to every record that uses blocking queries so we
can delete older records from the ember-data cache to prevent them
building up
* ui: Add basic timestamp method we can access from tests, fixup tests
Adds a timestamp method that we can access from within tests so we can
test that the SyncTime is being set.
There is probably a better way to do this, but this is also probably the
simplest approach - we are also likely to revisit this at a later date
* ui: Normal proxies line to services, sidecars to instances
Following on from https://github.com/hashicorp/consul/pull/5933 we
noticed that 'normal' proxies should link to the service, rather than
the service instance. Additionally proxy 'searching' within the
repository should take into account the name of the node that the
originating service is on (sidecar proxies are generally co-located)
Added an additional test here to prove that a sidecar-proxy with the
same service id but on a different node does not show the sidecar proxy
link.
Just because Consul gives us a 404 this doesn't guarantee the KV doesn't
exist, it doesn't even mean we don't have access to it. Furthermore we
should never destroyRecord's without user interaction (therefore only via the
repo.delete method).
This switches destroyRecord to unloadRecord which performs the
additional legwork to keep ember-data in sync with the actual truth.
unloadRecord unloads the record from ember-data rather than sending an API
delete request, which would have been the intent here.
Adds support for ACL Roles and Service Identities CRUD, along with necessary changes to Tokens, and the CSS improvements required.
Also includes refinements/improvements for easier testing of deeply nested components.
1. ember-data adapter/serializer/model triplet for Roles
2. repository, form/validations and searching filter for Roles
3. Moves potentially, repeated, or soon to to repeated functionality
into a mixin (mainly for 'many policy' relationships)
4. A few styling tweaks for little edge cases around roles
5. Router additions, Route, Controller and templates for Roles
Also see:
* UI: ACL Roles cont. plus Service Identities (#5661 and #5720)
This commit includes several pieces of functionality to enable services
to be removed and the page to present information that this has happened
but also keep the deleted information on the page. Along with the more
usual blocking query based listing.
To enable this:
1. Implements `meta` on the model (only available on collections in
ember)
2. Adds new `catchable` ComputedProperty alongside a `listen` helper for
working with specific errors that can be thrown from EventSources in an
ember-like way. Briefly, normal computed properties update when a
property changes, EventSources can additionally throw errors so we can
catch them and show different visuals based on that.
Also:
Add support for blocking queries on the service instance detail page
1. Previous we could return undefined when a service instance has no
proxy, but this means we have nothing to attach `meta` to. We've changed
this to return an almost empty object, so with only a meta property.
At first glance there doesn't seem to be any way to provide a proxy
object to templates and be able to detect whether it is actually null
or not so we instead change some conditional logic in the templates to
detect the property we are using to generate the anchor.
2. Made a `pauseUntil` test helper function for steps where we wait for
things. This helps for DRYness but also means if we can move away from
setInterval to something else later, we can do it in one place
3. Whilst running into point 1 here, we managed to make the blocking
queries eternally loop. Whilst this is due to an error in the code and
shouldn't ever happen whilst in actual use, we've added an extra check
so that we only recur/loop the blocking query if the previous response has a
`meta.cursor`
Adds support for blocking queries on the node detail page (#5489)
1. Moves data re-shaping for the templates variables into a repository
so they are easily covered by blocking queries (into coordinatesRepo)
2. The node API returns a 404 as signal for deregistration, we also
close the sessions and coordinates blocking queries when this happens
This commit includes several pieces of functionality to enable services
to be removed and the page to present information that this has happened
but also keep the deleted information on the page. Along with the more
usual blocking query based listing.
To enable this:
1. Implements `meta` on the model (only available on collections in
ember)
2. Adds new `catchable` ComputedProperty alongside a `listen` helper for
working with specific errors that can be thrown from EventSources in an
ember-like way. Briefly, normal computed properties update when a
property changes, EventSources can additionally throw errors so we can
catch them and show different visuals based on that.
More recommendations for blocking queries clients was added here:
https://github.com/hashicorp/consul/pull/5358
This commit mainly adds cursor/index validation/correction based on
these recommendations (plus tests)
The recommendations also suggest that clients should include rate
limiting. Because of this, we've moved the throttling out of Consul UI
specific code and into Blocking Query specific code. Currently the 'rate
limiting' in this commit only adds a sleep to every iteration of the
loop, which is not the recommended approach, but the code here organizes
the throttling functionality into something we can work with later to
provide something more apt.
* ui: Add forking based on service instance id existence
Proxies come in 2 flavours, 'normal' and sidecar. We know when a proxy
is a sidecar proxy based on whether a DestinationServiceID is set.
LocalServiceAddress and LocalServicePort are only relevant for sidecar
proxies.
This adds template logic to show different text depending on this
information.
Additionally adds test around connect proxies (#5418)
1. Adds page object for the instance detail page
2. Adds further scenario steps used in the tests
3. Adds acceptance testing around the instance detail page. Services
with proxies and the sidecar proxies and proxies themselves
4. Adds datacenter column for upstreams
5. Fixes bug routing bug for decision as to whether to request proxy
information or not
This gives more prominence to 'Service Instances' as opposed to 'Services'. It also begins to surface Connect related 'nouns' such as 'Proxies' and 'Upstreams' and begins to interconnect them giving more visibility to operators.
Various smaller changes:
1. Move healthcheck-status component to healthcheck-output
2. Create a new healthcheck-status component for showing the number of
checks plus its icon
3. Create a new healthcheck-info component to group multiple statuses
plus a different view if there are no checks
4. Componentize tag-list
- Maintain http headers as JSON-API meta for all API requests (#4946)
- Add EventSource ready for implementing blocking queries
- EventSource project implementation to enable blocking queries for service and node listings (#5267)
- Add setting to enable/disable blocking queries (#5352)
In some circumstances a consul 1.4 client could be running in an
un-upgraded 1.3 or lower cluster. Currently this gives a 500 error on
the new ACL token endpoint. Here we catch this specific 500 error/message
and set the users AccessorID to null. Elsewhere in the frontend we use
this fact (AccessorID being null) to decide whether to present the
legacy or the new ACL UI to the user.
Also:
- Re-adds in most of the old style ACL acceptance tests, now that we are keeping the old style UI
- Restricts code editors to HCL only mode for all `Rules` editing (legacy/'half legacy'/new style)
- Adds a [Stop using] button to the old style ACL rows so its possible to logout.
- Updates copy and documentation links for the upgrade notices
Repositories are a class of services to help with CRUD actions, most of
the functionality is reused across various Models. This creates a new
repository service that centralizes all this reused functionality.
Inheritance via ember `Service.extend` is used as opposed to
decorating via Mixins.
1. Move all repository services (and their tests) to a
services/repository folder
2. Standardize on a singular name format 'node vs nodes'
3. Create a new 'repository' service to centralize functionality. This
should be extended by 'repository' services
John Cowen