25 Commits (d491a3a9d5693bbec7a84c1d68cf90c041cf3c7d)

Author	SHA1	Message	Date
Freddy	fdd10dd8b8	Expose HTTP-based paths through Connect proxy (#6446) ... Fixes: #5396 This PR adds a proxy configuration stanza called expose. These flags register listeners in Connect sidecar proxies to allow requests to specific HTTP paths from outside of the node. This allows services to protect themselves by only listening on the loopback interface, while still accepting traffic from non Connect-enabled services. Under expose there is a boolean checks flag that would automatically expose all registered HTTP and gRPC check paths. This stanza also accepts a paths list to expose individual paths. The primary use case for this functionality would be to expose paths for third parties like Prometheus or the kubelet. Listeners for requests to exposed paths are be configured dynamically at run time. Any time a proxy, or check can be registered, a listener can also be created. In this initial implementation requests to these paths are not authenticated/encrypted.	5 years ago
R.B. Boyer	dfcdc41ef8	connect: allow 'envoy_cluster_json' escape hatch to continue to function (#6378)	5 years ago
R.B. Boyer	7a6faccf2f	docs: document how envoy escape hatches work with the discovery chain (#6350) ... - Bootstrap escape hatches are OK. - Public listener/cluster escape hatches are OK. - Upstream listener/cluster escape hatches are not supported. If an unsupported escape hatch is configured and the discovery chain is activated log a warning and act like it was not configured. Fixes #6160	5 years ago
R.B. Boyer	561b2fe606	connect: generate the full SNI names for discovery targets in the compiler rather than in the xds package (#6340)	5 years ago
R.B. Boyer	ae79cdab1b	connect: introduce ExternalSNI field on service-defaults (#6324) ... Compiling this will set an optional SNI field on each DiscoveryTarget. When set this value should be used for TLS connections to the instances of the target. If not set the default should be used. Setting ExternalSNI will disable mesh gateway use for that target. It also disables several service-resolver features that do not make sense for an external service.	5 years ago
R.B. Boyer	8e22d80e35	connect: fix failover through a mesh gateway to a remote datacenter (#6259) ... Failover is pushed entirely down to the data plane by creating envoy clusters and putting each successive destination in a different load assignment priority band. For example this shows that normally requests go to 1.2.3.4:8080 but when that fails they go to 6.7.8.9:8080: - name: foo load_assignment: cluster_name: foo policy: overprovisioning_factor: 100000 endpoints: - priority: 0 lb_endpoints: - endpoint: address: socket_address: address: 1.2.3.4 port_value: 8080 - priority: 1 lb_endpoints: - endpoint: address: socket_address: address: 6.7.8.9 port_value: 8080 Mesh gateways route requests based solely on the SNI header tacked onto the TLS layer. Envoy currently only lets you configure the outbound SNI header at the cluster layer. If you try to failover through a mesh gateway you ideally would configure the SNI value per endpoint, but that's not possible in envoy today. This PR introduces a simpler way around the problem for now: 1. We identify any target of failover that will use mesh gateway mode local or remote and then further isolate any resolver node in the compiled discovery chain that has a failover destination set to one of those targets. 2. For each of these resolvers we will perform a small measurement of comparative healths of the endpoints that come back from the health API for the set of primary target and serial failover targets. We walk the list of targets in order and if any endpoint is healthy we return that target, otherwise we move on to the next target. 3. The CDS and EDS endpoints both perform the measurements in (2) for the affected resolver nodes. 4. For CDS this measurement selects which TLS SNI field to use for the cluster (note the cluster is always going to be named for the primary target) 5. For EDS this measurement selects which set of endpoints will populate the cluster. Priority tiered failover is ignored. One of the big downsides to this approach to failover is that the failover detection and correction is going to be controlled by consul rather than deferring that entirely to the data plane as with the prior version. This also means that we are bound to only failover using official health signals and cannot make use of data plane signals like outlier detection to affect failover. In this specific scenario the lack of data plane signals is ok because the effectiveness is already muted by the fact that the ultimate destination endpoints will have their data plane signals scrambled when they pass through the mesh gateway wrapper anyway so we're not losing much. Another related fix is that we now use the endpoint health from the underlying service, not the health of the gateway (regardless of failover mode).	5 years ago
R.B. Boyer	c395affc93	connect: expose an API endpoint to compile the discovery chain (#6248) ... In addition to exposing compilation over the API cleaned up the structures that would be exchanged to be cleaner and easier to support and understand. Also removed ability to configure the envoy OverprovisioningFactor.	5 years ago
R.B. Boyer	f02924fafe	connect: simplify the compiled discovery chain data structures (#6242) ... This should make them better for sending over RPC or the API. Instead of a chain implemented explicitly like a linked list (nodes holding pointers to other nodes) instead switch to a flat map of named nodes with nodes linking other other nodes by name. The shipped structure is just a map and a string to indicate which key to start from. Other changes: * inline the compiler option InferDefaults as true * introduce compiled target config to avoid needing to send back additional maps of Resolvers; future target-specific compiled state can go here * move compiled MeshGateway out of the Resolver and into the TargetConfig where it makes more sense.	5 years ago
R.B. Boyer	6393edba53	connect: reconcile how upstream configuration works with discovery chains (#6225) ... * connect: reconcile how upstream configuration works with discovery chains The following upstream config fields for connect sidecars sanely integrate into discovery chain resolution: - Destination Namespace/Datacenter: Compilation occurs locally but using different default values for namespaces and datacenters. The xDS clusters that are created are named as they normally would be. - Mesh Gateway Mode (single upstream): If set this value overrides any value computed for any resolver for the entire discovery chain. The xDS clusters that are created may be named differently (see below). - Mesh Gateway Mode (whole sidecar): If set this value overrides any value computed for any resolver for the entire discovery chain. If this is specifically overridden for a single upstream this value is ignored in that case. The xDS clusters that are created may be named differently (see below). - Protocol (in opaque config): If set this value overrides the value computed when evaluating the entire discovery chain. If the normal chain would be TCP or if this override is set to TCP then the result is that we explicitly disable L7 Routing and Splitting. The xDS clusters that are created may be named differently (see below). - Connect Timeout (in opaque config): If set this value overrides the value for any resolver in the entire discovery chain. The xDS clusters that are created may be named differently (see below). If any of the above overrides affect the actual result of compiling the discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op override to "tcp") then the relevant parameters are hashed and provided to the xDS layer as a prefix for use in naming the Clusters. This is to ensure that if one Upstream discovery chain has no overrides and tangentially needs a cluster named "api.default.XXX", and another Upstream does have overrides for "api.default.XXX" that they won't cross-pollinate against the operator's wishes. Fixes #6159	5 years ago
hashicorp-ci	a4431da1cc	Merge Consul OSS branch 'master' at commit ef257b084d	5 years ago
Christian Muehlhaeuser	16193665ca	Fixed a few tautological condition mistakes (#6177) ... None of these changes should have any side-effects. They're merely fixing tautological mistakes.	5 years ago
R.B. Boyer	bcd2de3a2e	implement some missing service-router features and add more xDS testing (#6065) ... - also implement OnlyPassing filters for non-gateway clusters	5 years ago
Jack Pearkes	e6f1b78efb	Make cluster names SNI always (#6081) ... * Make cluster names SNI always * Update some tests * Ensure we check for prepared query types * Use sni for route cluster names * Proper mesh gateway mode defaulting when the discovery chain is used * Ignore service splits from PatchSliceOfMaps * Update some xds golden files for proper test output * Allow for grpc/http listeners/cluster configs with the disco chain * Update stats expectation	5 years ago
Matt Keeler	25f580bcaa	Fix a bunch of xds flaky tests ... The clusters/endpoints test were still relying on deterministic ordering of clusters/endpoints which cannot be relied upon due to golang purposefully not providing any guarantee about consistent interation ordering of maps. Also fixed a small bug in the connect proxy cluster generation that was causing the clusters slice to be double the size it needed to with the first half being all nil pointers.	5 years ago
Matt Keeler	a7421c160f	Implement mesh gateway management of service subsets ... Fixup some error handling	5 years ago
R.B. Boyer	4bdb690a25	activate most discovery chain features in xDS for envoy (#6024)	5 years ago
Matt Keeler	8d953f5840	Implement Mesh Gateways ... This includes both ingress and egress functionality.	5 years ago
R.B. Boyer	38d76c624e	Allow for both snake_case and CamelCase for config entries written with 'consul config write'. (#6044) ... This also has the added benefit of fixing an issue with passing time.Duration fields through config entries.	5 years ago
Matt Keeler	813e009a2d	Prepare for having different service kinds that are all generic… (#6013) ... Default to internal error when service kind is unknown	6 years ago
Paul Banks	ffcfdf29fc	Upgrade xDS (go-control-plane) API to support Envoy 1.10. (#5872) ... * Upgrade xDS (go-control-plane) API to support Envoy 1.10. This includes backwards compatibility shim to work around the ext_authz package rename in 1.10. It also adds integration test support in CI for 1.10.0. * Fix go vet complaints * go mod vendor * Update Envoy version info in docs * Update website/source/docs/connect/proxies/envoy.md	6 years ago
Paul Banks	421ecd32fc	Connect: allow configuring Envoy for L7 Observability (#5558) ... * Add support for HTTP proxy listeners * Add customizable bootstrap configuration options * Debug logging for xDS AuthZ * Add Envoy Integration test suite with basic test coverage * Add envoy command tests to cover new cases * Add tracing integration test * Add gRPC support WIP * Merged changes from master Docker. get CI integration to work with same Dockerfile now * Make docker build optional for integration * Enable integration tests again! * http2 and grpc integration tests and fixes * Fix up command config tests * Store all container logs as artifacts in circle on fail * Add retries to outer part of stats measurements as we keep missing them in CI * Only dump logs on failing cases * Fix typos from code review * Review tidying and make tests pass again * Add debug logs to exec test. * Fix legit test failure caused by upstream rename in envoy config * Attempt to reduce cases of bad TLS handshake in CI integration tests * bring up the right service * Add prometheus integration test * Add test for denied AuthZ both HTTP and TCP * Try ANSI term for Circle	6 years ago
Paul Banks	89fa5ec3ba	Connect: Fix Envoy getting stuck during load (#5499) ... * Connect: Fix Envoy getting stuck during load Also in this PR: - Enabled outlier detection on upstreams which will mark instances unhealthy after 5 failures (using Envoy's defaults) - Enable weighted load balancing where DNS weights are configured * Fix empty load assignments in the right place * Fix import names from review * Move millisecond parse to a helper function	6 years ago
R.B. Boyer	f4a3b9d518	fix typos reported by golangci-lint:misspell (#5434)	6 years ago
Nicholas Jackson	99fe9dabce	Envoy config cluster (#5308) ... * Start adding tests for cluster override * Refactor tests for clusters * Passing tests for custom upstream cluster override * Added capability to customise local app cluster * Rename config for local cluster override	6 years ago
Paul Banks	1909a95118	xDS Server Implementation (#4731) ... * Vendor updates for gRPC and xDS server * xDS server implementation for serving Envoy as a Connect proxy * Address initial review comments * consistent envoy package aliases; typos fixed; override TLS and authz for custom listeners * Moar Typos * Moar typos	6 years ago