Commit Graph

63 Commits (cdf40a6ae6414a4a012efd9a5e2b05f45929de99)

Author SHA1 Message Date
cskh cf6b6dddaf
feat(cli): enable to delete config entry from an input file (#13677)
* feat(cli): enable to delete config entry from an input file

- A new flag to config delete to delete a config entry in a
  valid config file, e.g., config delete -filename
  intention-allow.hcl
- Updated flag validation; -filename and -kind can't be set
  at the same time
- Move decode config entry method from config_write.go to
  helpers.go for reusing ParseConfigEntry()
- add changelog

Co-authored-by: Dan Upton <daniel@floppy.co>
2022-07-11 10:13:40 -04:00
Dhia Ayachi 1b779240ae
update gateway-services table with endpoints (#13217)
* update gateway-services table with endpoints

* fix failing test

* remove unneeded config in test

* rename "endpoint" to "destination"

* more endpoint renaming to destination in tests

* update isDestination based on service-defaults config entry creation

* use a 3 state kind to be able to set the kind to unknown (when neither a service or a destination exist)

* set unknown state to empty to avoid modifying alot of tests

* fix logic to set the kind correctly on CRUD

* fix failing tests

* add missing tests and fix service delete

* fix failing test

* Apply suggestions from code review

Co-authored-by: Dan Stough <dan.stough@hashicorp.com>

* fix a bug with kind and add relevant test

* fix compile error

* fix failing tests

* add kind to clone

* fix failing tests

* fix failing tests in catalog endpoint

* fix service dump test

* Apply suggestions from code review

Co-authored-by: Dan Stough <dan.stough@hashicorp.com>

* remove duplicate tests

* rename consts and fix kind when no destination is defined in the service-defaults.

* rename Kind to ServiceKind and change switch to use .(type)

Co-authored-by: Dan Stough <dan.stough@hashicorp.com>
2022-05-31 16:20:12 -04:00
DanStough 817449041d chore(test): Update bats version 2022-05-24 11:56:08 -04:00
Mark Anderson 6430af1c0e Update mesh config tests
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
2022-05-04 08:50:59 -07:00
R.B. Boyer 1a491886fa
structs: ensure exported-services PeerName field can be addressed as peer_name (#12862) 2022-04-27 10:27:21 -05:00
R.B. Boyer e79ce8ab03
xds: adding control of the mesh-wide min/max TLS versions and cipher suites from the mesh config entry (#12601)
- `tls.incoming`: applies to the inbound mTLS targeting the public
  listener on `connect-proxy` and `terminating-gateway` envoy instances

- `tls.outgoing`: applies to the outbound mTLS dialing upstreams from
  `connect-proxy` and `ingress-gateway` envoy instances

Fixes #11966
2022-03-30 13:43:59 -05:00
Mike Morris 1b1a97e8f9
ingress: allow setting TLS min version and cipher suites in ingress gateway config entries (#11576)
* xds: refactor ingress listener SDS configuration

* xds: update resolveListenerSDS call args in listeners_test

* ingress: add TLS min, max and cipher suites to GatewayTLSConfig

* xds: implement envoyTLSVersions and envoyTLSCipherSuites

* xds: merge TLS config

* xds: configure TLS parameters with ingress TLS context from leaf

* xds: nil check in resolveListenerTLSConfig validation

* xds: nil check in makeTLSParameters* functions

* changelog: add entry for TLS params on ingress config entries

* xds: remove indirection for TLS params in TLSConfig structs

* xds: return tlsContext, nil instead of ambiguous err

Co-authored-by: Chris S. Kim <ckim@hashicorp.com>

* xds: switch zero checks to types.TLSVersionUnspecified

* ingress: add validation for ingress config entry TLS params

* ingress: validate listener TLS config

* xds: add basic ingress with TLS params tests

* xds: add ingress listeners mixed TLS min version defaults precedence test

* xds: add more explicit tests for ingress listeners inheriting gateway defaults

* xds: add test for single TLS listener on gateway without TLS defaults

* xds: regen golden files for TLSVersionInvalid zero value, add TLSVersionAuto listener test

* types/tls: change TLSVersion to string

* types/tls: update TLSCipherSuite to string type

* types/tls: implement validation functions for TLSVersion and TLSCipherSuites, make some maps private

* api: add TLS params to GatewayTLSConfig, add tests

* api: add TLSMinVersion to ingress gateway config entry test JSON

* xds: switch to Envoy TLS cipher suite encoding from types package

* xds: fixup validation for TLSv1_3 min version with cipher suites

* add some kitchen sink tests and add a missing struct tag

* xds: check if mergedCfg.TLSVersion is in TLSVersionsWithConfigurableCipherSuites

* xds: update connectTLSEnabled comment

* xds: remove unsued resolveGatewayServiceTLSConfig function

 * xds: add makeCommonTLSContextFromLeafWithoutParams

* types/tls: add LessThan comparator function for concrete values

* types/tls: change tlsVersions validation map from string to TLSVersion keys

* types/tls: remove unused envoyTLSCipherSuites

* types/tls: enable chacha20 cipher suites for Consul agent

* types/tls: remove insecure cipher suites from allowed config

TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 and TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 are both explicitly listed as insecure and disabled in the Go source.

Refs https://cs.opensource.google/go/go/+/refs/tags/go1.17.3:src/crypto/tls/cipher_suites.go;l=329-330

* types/tls: add ValidateConsulAgentCipherSuites function, make direct lookup map private

* types/tls: return all unmatched cipher suites in validation errors

* xds: check that Envoy API value matching TLS version is found when building TlsParameters

* types/tls: check that value is found in map before appending to slice in MarshalEnvoyTLSCipherSuiteStrings

* types/tls: cast to string rather than fmt.Printf in TLSCihperSuite.String()

* xds: add TLSVersionUnspecified to list of configurable cipher suites

* structs: update note about config entry warning

* xds: remove TLS min version cipher suite unconfigurable test placeholder

* types/tls: update tests to remove assumption about private map values

Co-authored-by: R.B. Boyer <rb@hashicorp.com>
2022-01-11 11:46:42 -05:00
freddygv 9b44861ce4 Update api module and decoding tests 2021-12-06 12:32:29 -07:00
freddygv ed6076db26 Rename partition-exports to exported-services
Using a name less tied to partitions gives us more flexibility to use
this config entry in OSS for exports between datacenters/meshes.
2021-12-03 17:47:31 -07:00
freddygv 5c24ed61a8 Rename service-exports to partition-exports
Existing config entries prefixed by service- are specific to individual
services. Since this config entry applies to partitions it is being
renamed.

Additionally, the Partition label was changed to Name because using
Partition at the top-level and in the enterprise meta was leading to the
enterprise meta partition being dropped by msgpack.
2021-10-25 17:58:48 -06:00
Kyle Havlovitz 04cd2c983e Add new service-exports config entry 2021-10-20 12:24:18 -07:00
R.B. Boyer b0657973f2
add partition cli flag to all cli commands that have namespace flag (#10668) 2021-07-21 14:45:24 -05:00
Freddy ffb13f35f1
Rename CatalogDestinationsOnly (#10397)
CatalogDestinationsOnly is a passthrough that would enable dialing
addresses outside of Consul's catalog. However, when this flag is set to
true only _connect_ endpoints for services can be dialed.

This flag is being renamed to signal that non-Connect endpoints can't be
dialed by transparent proxies when the value is set to true.
2021-06-14 14:15:09 -06:00
Freddy 429f9d8bb8
Add flag for transparent proxies to dial individual instances (#10329) 2021-06-09 14:34:17 -06:00
Daniel Nephin a07a58a873 config-entry: use custom MarshalJSON for mesh type
So that the Kind field is added to the JSON object.
2021-04-29 17:49:43 -04:00
Daniel Nephin 62efaaab21 config-entry: remove Kind and Name field from Mesh config entry
No config entry needs a Kind field. It is only used to determine the Go type to
target. As we introduce new config entries (like this one) we can remove the kind field
and have the GetKind method return the single supported value.

In this case (similar to proxy-defaults) the Name field is also unnecessary. We always
use the same value. So we can omit the name field entirely.
2021-04-29 17:11:21 -04:00
Freddy 078c40425f
Rename "cluster" config entry to "mesh" (#10127)
This config entry is being renamed primarily because in k8s the name
cluster could be confusing given that the config entry applies across
federated datacenters.

Additionally, this config entry will only apply to Consul as a service
mesh, so the more generic "cluster" name is not needed.
2021-04-28 16:13:29 -06:00
R.B. Boyer 4db8b78854
connect: update centralized upstreams representation in service-defaults (#10015) 2021-04-15 14:21:44 -05:00
freddygv 7cb3f32672 Convert new tproxy structs in api module into ptrs
This way we avoid serializing these when empty. Otherwise users of the
latest version of the api submodule cannot interact with older versions
of Consul, because a new api client would send keys that the older Consul
doesn't recognize yet.
2021-04-13 12:44:25 -06:00
freddygv 7bd51ff536 Replace TransparentProxy bool with ProxyMode
This PR replaces the original boolean used to configure transparent
proxy mode. It was replaced with a string mode that can be set to:

- "": Empty string is the default for when the setting should be
defaulted from other configuration like config entries.
- "direct": Direct mode is how applications originally opted into the
mesh. Proxy listeners need to be dialed directly.
- "transparent": Transparent mode enables configuring Envoy as a
transparent proxy. Traffic must be captured and redirected to the
inbound and outbound listeners.

This PR also adds a struct for transparent proxy specific configuration.
Initially this is not stored as a pointer. Will revisit that decision
before GA.
2021-04-12 09:35:14 -06:00
freddygv ab752c1c86 Avoid sending zero-value upstream defaults from api 2021-04-07 15:03:42 -06:00
R.B. Boyer 499fee73b3
connect: add toggle to globally disable wildcard outbound network access when transparent proxy is enabled (#9973)
This adds a new config entry kind "cluster" with a single special name "cluster" where this can be controlled.
2021-04-06 13:19:59 -05:00
Freddy 8207b832df
Add TransparentProxy option to proxy definitions 2021-03-17 17:01:45 -06:00
freddygv 8b46d8dcbb Restore old Envoy prefix on escape hatches
This is done because after removing ID and NodeName from
ServiceConfigRequest we will no longer know whether a request coming in
is for a Consul client earlier than v1.10.
2021-03-15 14:12:57 -06:00
freddygv 6fd30d0384 Add TransparentProxy opt to proxy definition 2021-03-11 11:37:21 -07:00
freddygv e3dc2a49df Turn Limits and PassiveHealthChecks into pointers 2021-03-11 11:04:40 -07:00
freddygv 87cde19b4c Create new types for service-defaults upstream cfg 2021-03-08 22:10:27 -07:00
Daniel Nephin b9e60c0775 testing: skip slow tests with -short
Add a skip condition to all tests slower than 100ms.

This change was made using `gotestsum tool slowest` with data from the
last 3 CI runs of master.
See https://github.com/gotestyourself/gotestsum#finding-and-skipping-slow-tests

With this change:

```
$ time go test -count=1 -short ./agent
ok      github.com/hashicorp/consul/agent       0.743s

real    0m4.791s

$ time go test -count=1 -short ./agent/consul
ok      github.com/hashicorp/consul/agent/consul        4.229s

real    0m8.769s
```
2020-12-07 13:42:55 -05:00
R.B. Boyer 1b413b0444
connect: support defining intentions using layer 7 criteria (#8839)
Extend Consul’s intentions model to allow for request-based access control enforcement for HTTP-like protocols in addition to the existing connection-based enforcement for unspecified protocols (e.g. tcp).
2020-10-06 17:09:13 -05:00
R.B. Boyer a2a8e9c783
connect: intentions are now managed as a new config entry kind "service-intentions" (#8834)
- Upgrade the ConfigEntry.ListAll RPC to be kind-aware so that older
copies of consul will not see new config entries it doesn't understand
replicate down.

- Add shim conversion code so that the old API/CLI method of interacting
with intentions will continue to work so long as none of these are
edited via config entry endpoints. Almost all of the read-only APIs will
continue to function indefinitely.

- Add new APIs that operate on individual intentions without IDs so that
the UI doesn't need to implement CAS operations.

- Add a new serf feature flag indicating support for
intentions-as-config-entries.

- The old line-item intentions way of interacting with the state store
will transparently flip between the legacy memdb table and the config
entry representations so that readers will never see a hiccup during
migration where the results are incomplete. It uses a piece of system
metadata to control the flip.

- The primary datacenter will begin migrating intentions into config
entries on startup once all servers in the datacenter are on a version
of Consul with the intentions-as-config-entries feature flag. When it is
complete the old state store representations will be cleared. We also
record a piece of system metadata indicating this has occurred. We use
this metadata to skip ALL of this code the next time the leader starts
up.

- The secondary datacenters continue to run the old intentions
replicator until all servers in the secondary DC and primary DC support
intentions-as-config-entries (via serf flag). Once this condition it met
the old intentions replicator ceases.

- The secondary datacenters replicate the new config entries as they are
migrated in the primary. When they detect that the primary has zeroed
it's old state store table it waits until all config entries up to that
point are replicated and then zeroes its own copy of the old state store
table. We also record a piece of system metadata indicating this has
occurred. We use this metadata to skip ALL of this code the next time
the leader starts up.
2020-10-06 13:24:05 -05:00
freddygv 7b9d1b41d5 Resolve conflicts against master 2020-09-11 18:41:58 -06:00
freddygv 768dbaa68d Add session flag to cookie config 2020-09-11 18:34:03 -06:00
freddygv eab90ea9fa Revert EnvoyConfig nesting 2020-09-11 09:21:43 -06:00
freddygv cf018cb2e0 Fixup stray LB infix refs 2020-09-03 08:56:17 -06:00
freddygv f81fe6a1a1 Remove LB infix and move injection to xds 2020-09-02 15:13:50 -06:00
R.B. Boyer 119e945c3e
connect: all config entries pick up a meta field (#8596)
Fixes #8595
2020-09-02 14:10:25 -05:00
freddygv 63f79e5f9b Restructure structs and other PR comments 2020-09-02 09:10:50 -06:00
Daniel Nephin 16217fe9b9 testing: use t.Cleanup in testutil.TempFile
So that it has the same behaviour as TempDir.

Also remove the now unnecessary 'defer os.Remove'
2020-08-14 20:06:01 -04:00
Chris Piraino ea683ebb6c
cli: Output message on success when writing/deleting entries (#7806)
This provides a user with a better experience, knowing that the command
worked appropriately. The output of the write/delete CLI commands are
not going to be used in a bash script, in fact previously a success
provided no ouput, so we do not have to worry about spurious text being
injected into bash pipelines.
2020-06-29 15:47:40 -05:00
Daniel Nephin 75cbbe2702 config: add HookWeakDecodeFromSlice
Currently opaque config blocks (config entries, and CA provider config) are
modified by PatchSliceOfMaps, making it impossible for these opaque
config sections to contain slices of maps.

In order to fix this problem, any lazy-decoding of these blocks needs to support
weak decoding of []map[string]interface{} to a struct type before
PatchSliceOfMaps is replaces. This is necessary because these config
blobs are persisted, and during an upgrade an older version of Consul
could read one of the new configuration values, which would cause an error.

To support the upgrade path, this commit first introduces the new hooks
for weak decoding of []map[string]interface{} and uses them only in the
lazy-decode paths. That way, in a future release, new style
configuration will be supported by the older version of Consul.

This decode hook has a number of advantages:

1. It no longer panics. It allows mapstructure to report the error
2. It no longer requires the user to declare which fields are slices of
   structs. It can deduce that information from the 'to' value.
3. It will make it possible to preserve opaque configuration, allowing
   for structured opaque config.
2020-06-08 17:05:09 -04:00
Daniel Nephin 6a2d7d77c0 config: use the new HookTranslateKeys instead of lib.TranslateKeys
With the exception of CA provider config, which will be migrated at some
later time.
2020-05-27 16:24:47 -04:00
Daniel Nephin 600645b5f9 Add unconvert linter
To find unnecessary type convertions
2020-05-12 13:47:25 -04:00
Chris Piraino 0c22eacca8 Add TLS field to ingress API structs
- Adds test in api and command/config/write packages
2020-05-06 15:12:02 -05:00
Chris Piraino f40833d094 Allow Hosts field to be set on an ingress config entry
- Validate that this cannot be set on a 'tcp' listener nor on a wildcard
service.
- Add Hosts field to api and test in consul config write CLI
- xds: Configure envoy with user-provided hosts from ingress gateways
2020-05-06 15:06:13 -05:00
Chris Piraino b73a13fc9e Remove service_subset field from ingress config entry
We decided that this was not a useful MVP feature, and just added
unnecessary complexity
2020-05-06 15:06:13 -05:00
Freddy 137a2c32c6
TLS Origination for Terminating Gateways (#7671) 2020-04-27 16:25:37 -06:00
Freddy aae14b3951
Add decode rules for Expose cfg in service-defaults (#7611) 2020-04-07 19:37:47 -06:00
Daniel Nephin 0d8edc3e27
Merge pull request #7562 from hashicorp/dnephin/remove-tname-from-name
testing: Remove old default value from NewTestAgent() calls
2020-04-01 11:48:45 -04:00
Daniel Nephin 475659a132 Remove name from NewTestAgent
Using:

git grep -l 'NewTestAgent(t, t.Name(),' | \
    xargs sed -i -e 's/NewTestAgent(t, t.Name(),/NewTestAgent(t,/g'
2020-03-31 16:13:44 -04:00
Freddy 90576060bc
Add config entry for terminating gateways (#7545)
This config entry will be used to configure terminating gateways.

It accepts the name of the gateway and a list of services the gateway will represent.

For each service users will be able to specify: its name, namespace, and additional options for TLS origination.

Co-authored-by: Kyle Havlovitz <kylehav@gmail.com>
Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>
2020-03-31 13:27:32 -06:00