38 Commits (c64f3600f0d6cc0856569e6c83f2e1cfeddaf296)

Author	SHA1	Message	Date
freddygv	ce964f8ea5	Update xds for transparent proxy	4 years ago
R.B. Boyer	398b766532	xds: default to speaking xDS v3, but allow for v2 to be spoken upon request (#9658) ... - Also add support for envoy 1.17.0	4 years ago
R.B. Boyer	3b6ffc447b	xds: remove deprecated usages of xDS (#9602) ... Note that this does NOT upgrade to xDS v3. That will come in a future PR. Additionally: - Ignored staticcheck warnings about how github.com/golang/protobuf is deprecated. - Shuffled some agent/xds imports in advance of a later xDS v3 upgrade. - Remove support for envoy 1.13.x but don't add in 1.17.x yet. We have to wait until the xDS v3 support is added in a follow-up PR. Fixes #8425	4 years ago
freddygv	768dbaa68d	Add session flag to cookie config	4 years ago
freddygv	9d2a9169fd	PR comments	4 years ago
freddygv	eab90ea9fa	Revert EnvoyConfig nesting	4 years ago
freddygv	959d9913b8	Add server receiver to routes and log tgw err	4 years ago
freddygv	318aa094fd	Fix http assertion in route creation	4 years ago
freddygv	f81fe6a1a1	Remove LB infix and move injection to xds	4 years ago
freddygv	63f79e5f9b	Restructure structs and other PR comments	4 years ago
freddygv	28d0602fc1	Pass LB config to Envoy via xDS	4 years ago
R.B. Boyer	74d5df7c7a	xds: use envoy's rbac filter to handle intentions entirely within envoy (#8569)	4 years ago
R.B. Boyer	e3cd4a8539	connect: use stronger validation that ingress gateways have compatible protocols defined for their upstreams (#8470) ... Fixes #8466 Since Consul 1.8.0 there was a bug in how ingress gateway protocol compatibility was enforced. At the point in time that an ingress-gateway config entry was modified the discovery chain for each upstream was checked to ensure the ingress gateway protocol matched. Unfortunately future modifications of other config entries were not validated against existing ingress-gateway definitions, such as: 1. create tcp ingress-gateway pointing to 'api' (ok) 2. create service-defaults for 'api' setting protocol=http (worked, but not ok) 3. create service-splitter or service-router for 'api' (worked, but caused an agent panic) If you were to do these in a different order, it would fail without a crash: 1. create service-defaults for 'api' setting protocol=http (ok) 2. create service-splitter or service-router for 'api' (ok) 3. create tcp ingress-gateway pointing to 'api' (fail with message about protocol mismatch) This PR introduces the missing validation. The two new behaviors are: 1. create tcp ingress-gateway pointing to 'api' (ok) 2. (NEW) create service-defaults for 'api' setting protocol=http ("ok" for back compat) 3. (NEW) create service-splitter or service-router for 'api' (fail with message about protocol mismatch) In consideration for any existing users that may be inadvertently be falling into item (2) above, that is now officiall a valid configuration to be in. For anyone falling into item (3) above while you cannot use the API to manufacture that scenario anymore, anyone that has old (now bad) data will still be able to have the agent use them just enough to generate a new agent/proxycfg error message rather than a panic. Unfortunately we just don't have enough information to properly fix the config entries.	4 years ago
R.B. Boyer	c599a2f5f4	xds: add support for envoy 1.15.0 and drop support for 1.11.x (#8424) ... Related changes: - hard-fail the xDS connection attempt if the envoy version is known to be too old to be supported - remove the RouterMatchSafeRegex proxy feature since all supported envoy versions have it - stop using --max-obj-name-len (due to: envoyproxy/envoy#11740)	4 years ago
R.B. Boyer	1eef096dfe	xds: version sniff envoy and switch regular expressions from 'regex' to 'safe_regex' on newer envoy versions (#8222) ... - cut down on extra node metadata transmission - split the golden file generation to compare all envoy version	4 years ago
Chris Piraino	735337b170	Append port number to ingress host domain (#8190) ... A port can be sent in the Host header as defined in the HTTP RFC, so we take any hosts that we want to match traffic to and also add another host with the listener port added. Also fix an issue with envoy integration tests not running the case-ingress-gateway-tls test.	4 years ago
Daniel Nephin	010a609912	Fix a bunch of unparam lint issues	4 years ago
R.B. Boyer	c63c994b04	connect: upgrade github.com/envoyproxy/go-control-plane to v0.9.5 (#8165)	4 years ago
Chris Piraino	1a853fc954	Always require Host header values for http services (#7990) ... Previously, we did not require the 'service-name.*' host header value when on a single http service was exposed. However, this allows a user to get into a situation where, if they add another service to the listener, suddenly the previous service's traffic might not be routed correctly. Thus, we always require the Host header, even if there is only 1 service. Also, we add the make the default domain matching more restrictive by matching "service-name.ingress.*" by default. This lines up better with the namespace case and more accurately matches the Consul DNS value we expect people to use in this case.	5 years ago
Chris Piraino	d498a0afc9	Correctly set a namespace label in the required domain for xds routes ... If an upstream is not in the default namespace, we expect DNS requests to be served over "<service-name>.ingress.<namespace>.*"	5 years ago
Chris Piraino	45e635286a	Re-add comment on connect-proxy virtual hosts	5 years ago
Chris Piraino	f40833d094	Allow Hosts field to be set on an ingress config entry ... - Validate that this cannot be set on a 'tcp' listener nor on a wildcard service. - Add Hosts field to api and test in consul config write CLI - xds: Configure envoy with user-provided hosts from ingress gateways	5 years ago
Kyle Havlovitz	247f9eaf13	Allow ingress gateways to route traffic based on Host header ... This commit adds the necessary changes to allow an ingress gateway to route traffic from a single defined port to multiple different upstream services in the Consul mesh. To do this, we now require all HTTP requests coming into the ingress gateway to specify a Host header that matches "<service-name>.*" in order to correctly route traffic to the correct service. - Differentiate multiple listener's route names by port - Adds a case in xds for allowing default discovery chains to create a route configuration when on an ingress gateway. This allows default services to easily use host header routing - ingress-gateways have a single route config for each listener that utilizes domain matching to route to different services.	5 years ago
Kyle Havlovitz	e7b1ee55de	Add http routing support and integration test to ingress gateways	5 years ago
Daniel Nephin	1d90ecc31d	Remove unused token parameter	5 years ago
Chris Piraino	47ff532735	Fixes envoy config when both RetryOn* values are set (#7280)	5 years ago
R.B. Boyer	561b2fe606	connect: generate the full SNI names for discovery targets in the compiler rather than in the xds package (#6340)	5 years ago
R.B. Boyer	c395affc93	connect: expose an API endpoint to compile the discovery chain (#6248) ... In addition to exposing compilation over the API cleaned up the structures that would be exchanged to be cleaner and easier to support and understand. Also removed ability to configure the envoy OverprovisioningFactor.	5 years ago
R.B. Boyer	f02924fafe	connect: simplify the compiled discovery chain data structures (#6242) ... This should make them better for sending over RPC or the API. Instead of a chain implemented explicitly like a linked list (nodes holding pointers to other nodes) instead switch to a flat map of named nodes with nodes linking other other nodes by name. The shipped structure is just a map and a string to indicate which key to start from. Other changes: * inline the compiler option InferDefaults as true * introduce compiled target config to avoid needing to send back additional maps of Resolvers; future target-specific compiled state can go here * move compiled MeshGateway out of the Resolver and into the TargetConfig where it makes more sense.	5 years ago
R.B. Boyer	6393edba53	connect: reconcile how upstream configuration works with discovery chains (#6225) ... * connect: reconcile how upstream configuration works with discovery chains The following upstream config fields for connect sidecars sanely integrate into discovery chain resolution: - Destination Namespace/Datacenter: Compilation occurs locally but using different default values for namespaces and datacenters. The xDS clusters that are created are named as they normally would be. - Mesh Gateway Mode (single upstream): If set this value overrides any value computed for any resolver for the entire discovery chain. The xDS clusters that are created may be named differently (see below). - Mesh Gateway Mode (whole sidecar): If set this value overrides any value computed for any resolver for the entire discovery chain. If this is specifically overridden for a single upstream this value is ignored in that case. The xDS clusters that are created may be named differently (see below). - Protocol (in opaque config): If set this value overrides the value computed when evaluating the entire discovery chain. If the normal chain would be TCP or if this override is set to TCP then the result is that we explicitly disable L7 Routing and Splitting. The xDS clusters that are created may be named differently (see below). - Connect Timeout (in opaque config): If set this value overrides the value for any resolver in the entire discovery chain. The xDS clusters that are created may be named differently (see below). If any of the above overrides affect the actual result of compiling the discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op override to "tcp") then the relevant parameters are hashed and provided to the xDS layer as a prefix for use in naming the Clusters. This is to ensure that if one Upstream discovery chain has no overrides and tangentially needs a cluster named "api.default.XXX", and another Upstream does have overrides for "api.default.XXX" that they won't cross-pollinate against the operator's wishes. Fixes #6159	5 years ago
R.B. Boyer	ad9e7b6ae9	connect: allow L7 routers to match on http methods (#6164) ... Fixes #6158	5 years ago
R.B. Boyer	85cf2706e6	connect: change router syntax for matching query parameters to resemble the syntax for matching paths and headers for consistency. (#6163) ... This is a breaking change, but only in the context of the beta series.	5 years ago
R.B. Boyer	1dbd92e091	connect: validate and test more of the L7 config entries (#6156)	5 years ago
R.B. Boyer	d7a5158805	xds: allow http match criteria to be applied to routes on services using grpc protocols (#6149)	5 years ago
R.B. Boyer	bcd2de3a2e	implement some missing service-router features and add more xDS testing (#6065) ... - also implement OnlyPassing filters for non-gateway clusters	5 years ago
Jack Pearkes	e6f1b78efb	Make cluster names SNI always (#6081) ... * Make cluster names SNI always * Update some tests * Ensure we check for prepared query types * Use sni for route cluster names * Proper mesh gateway mode defaulting when the discovery chain is used * Ignore service splits from PatchSliceOfMaps * Update some xds golden files for proper test output * Allow for grpc/http listeners/cluster configs with the disco chain * Update stats expectation	5 years ago
R.B. Boyer	4bdb690a25	activate most discovery chain features in xDS for envoy (#6024)	5 years ago
Paul Banks	1909a95118	xDS Server Implementation (#4731) ... * Vendor updates for gRPC and xDS server * xDS server implementation for serving Envoy as a Connect proxy * Address initial review comments * consistent envoy package aliases; typos fixed; override TLS and authz for custom listeners * Moar Typos * Moar typos	6 years ago