330 Commits (c5b41671d3bd2ead9076ecf0646c1efe1be477bc)

Author	SHA1	Message	Date
Melissa Kam	64cd172f30	[CC-7411] Fix environment variable precedence when linking to HCP (#20527) ... Fix so that link API values are used over env vars When a link is created via the API, those values should take precedence over the values set by environment variables. This change loads all the env vars initially as part of the config builder rather than on demand.	10 months ago
Chris S. Kim	26661a1c3b	Add default intention policy (#20544)	10 months ago
Melissa Kam	3b9bb8d6f9	[CC-7044] Start HCP manager as part of link creation (#20312) ... * Check for ACL write permissions on write Link eventually will be creating a token, so require acl:write. * Convert Run to Start, only allow to start once * Always initialize HCP components at startup * Support for updating config and client * Pass HCP manager to controller * Start HCP manager in link resource Start as part of link creation rather than always starting. Update the HCP manager with values from the link before starting as well. * Fix metrics sink leaked goroutine * Remove the hardcoded disabled hostname prefix The HCP metrics sink will always be enabled, so the length of sinks will always be greater than zero. This also means that we will also always default to prefixing metrics with the hostname, which is what our documentation states is the expected behavior anyway. * Add changelog * Check and set running status in one method * Check for primary datacenter, add back test * Clarify merge reasoning, fix timing issue in test * Add comment about controller placement * Expand on breaking change, fix typo in changelog	10 months ago
R.B. Boyer	2e08a7e1c7	v2: prevent use of the v2 experiments in secondary datacenters for now (#20299) ... Ultimately we will have to rectify wan federation with v2 catalog adjacent experiments, but for now blanket prevent usage of the resource-apis, v2dns, and v2tenancy experiments in secondary datacenters.	10 months ago
Melissa Kam	98c9702ba3	[CC-7031] Add initialization support to resource controllers (#20138) ... * Add Initializer to the controller The Initializer adds support for running any required initialization steps when the controller is first started. * Implement HCP Link initializer The link initializer will create a Link resource if the cloud configuration has been set. * Simplify retry logic and testing * Remove internal retry, replace with logging logic	10 months ago
Dan Stough	d52e80b619	[OSS] feat: add experiments flag for v2 dns and skeleton interfaces (#20115) ... feat: add experiments flag for v2 dns and skeleton interfaces	11 months ago
Nick Cellino	0deebaf637	Add Link resource type and controller skeleton (#19788) ... * Add HCCLink resource type * Register HCCLink resource type with basic validation * Add validation for required fields * Add test for default ACLs * Add no-op controller for HCCLink * Add resource-apis semantic validation check in hcclink controller * Add copyright headers * Rename HCCLink to Link * Add hcp_cluster_url to link proto * Update 'disabled' reason with more detail * Update link status name to consul.io/hcp/link * Change link version from v1 to v2 * Use feature flag/experiment to enable v2 resources with HCP	11 months ago
Derek Menteer	8f4c43727d	[NET-5916] Fix locality-aware routing config and tests (CE) (#19483) ... Fix locality-aware routing config and tests	1 year ago
Derek Menteer	48c4a5b736	Add grpc keepalive configuration. (#19339) ... Prior to the introduction of this configuration, grpc keepalive messages were sent after 2 hours of inactivity on the stream. This posed issues in various scenarios where the server-side xds connection balancing was unaware that envoy instances were uncleanly killed / force-closed, since the connections would only be cleaned up after ~5 minutes of TCP timeouts occurred. Setting this config to a 30 second interval with a 20 second timeout ensures that at most, it should take up to 50 seconds for a dead xds connection to be closed.	1 year ago
Dhia Ayachi	ed882e2522	Make raft-wal default when `resource-apis` is active (#19090) ... Make raft-wal default when v2 catalog experiment is on	1 year ago
John Landa	9eaa8eb026	dns token (#17936) ... * dns token fix whitespace for docs and comments fix test cases fix test cases remove tabs in help text Add changelog Peering dns test Peering dns test Partial implementation of Peered DNS test Swap to new topology lib expose dns port for integration tests on client remove partial test implementation remove extra port exposure remove changelog from the ent pr Add dns token to set-agent-token switch Add enterprise golden file Use builtin/dns template in tests Update ent dns policy Update ent dns template test remove local gen certs fix templated policy specs * add changelog * go mod tidy	1 year ago
Nick Ethier	1a3081ab32	agent/config: prevent startup if resource-apis experiment and cloud are enabled (#18876)	1 year ago
Phil Porada	7ea986783d	Add TCP+TLS Healthchecks (#18381) ... * Begin adding TCPUseTLS * More TCP with TLS plumbing * Making forward progress * Keep on adding TCP+TLS support for healthchecks * Removed too many lines * Unit tests for TCP+TLS * Update tlsutil/config.go Co-authored-by: Samantha <hello@entropy.cat> * Working on the tcp+tls unit test * Updated the runtime integration tests * Progress * Revert this file back to HEAD * Remove debugging lines * Implement TLS enabled TCP socket server and make a successful TCP+TLS healthcheck on it * Update docs * Update agent/agent_test.go Co-authored-by: Samantha <hello@entropy.cat> * Update website/content/docs/ecs/configuration-reference.mdx Co-authored-by: Samantha <hello@entropy.cat> * Update website/content/docs/ecs/configuration-reference.mdx Co-authored-by: Samantha <hello@entropy.cat> * Update agent/checks/check.go Co-authored-by: Samantha <hello@entropy.cat> * Address comments * Remove extraneous bracket * Update agent/agent_test.go Co-authored-by: Samantha <hello@entropy.cat> * Update agent/agent_test.go Co-authored-by: Samantha <hello@entropy.cat> * Update website/content/docs/ecs/configuration-reference.mdx Co-authored-by: Samantha <hello@entropy.cat> * Update the mockTLSServer * Remove trailing newline * Address comments * Fix merge problem * Add changelog entry --------- Co-authored-by: Samantha <hello@entropy.cat>	1 year ago
hashicorp-copywrite[bot]	5fb9df1640	[COMPLIANCE] License changes (#18443) ... * Adding explicit MPL license for sub-package This directory and its subdirectories (packages) contain files licensed with the MPLv2 `LICENSE` file in this directory and are intentionally licensed separately from the BSL `LICENSE` file at the root of this repository. * Adding explicit MPL license for sub-package This directory and its subdirectories (packages) contain files licensed with the MPLv2 `LICENSE` file in this directory and are intentionally licensed separately from the BSL `LICENSE` file at the root of this repository. * Updating the license from MPL to Business Source License Going forward, this project will be licensed under the Business Source License v1.1. Please see our blog post for more details at <Blog URL>, FAQ at www.hashicorp.com/licensing-faq, and details of the license at www.hashicorp.com/bsl. * add missing license headers * Update copyright file headers to BUSL-1.1 * Update copyright file headers to BUSL-1.1 * Update copyright file headers to BUSL-1.1 * Update copyright file headers to BUSL-1.1 * Update copyright file headers to BUSL-1.1 * Update copyright file headers to BUSL-1.1 * Update copyright file headers to BUSL-1.1 * Update copyright file headers to BUSL-1.1 * Update copyright file headers to BUSL-1.1 * Update copyright file headers to BUSL-1.1 * Update copyright file headers to BUSL-1.1 * Update copyright file headers to BUSL-1.1 * Update copyright file headers to BUSL-1.1 * Update copyright file headers to BUSL-1.1 * Update copyright file headers to BUSL-1.1 --------- Co-authored-by: hashicorp-copywrite[bot] <110428419+hashicorp-copywrite[bot]@users.noreply.github.com>	1 year ago
Fulvio	f4b08040fd	Add verify server hostname to tls default (#17155)	1 year ago
Chris S. Kim	a4653de8da	CA provider doc updates and Vault provider minor update (#17831) ... Update CA provider docs Clarify that providers can differ between primary and secondary datacenters Provide a comparison chart for consul vs vault CA providers Loosen Vault CA provider validation for RootPKIPath Update Vault CA provider documentation	1 year ago
chappie	5352ccf8ed	HCP Add node id/name to config (#17750)	1 year ago
Eric Haberkorn	0994ccf162	validate localities on agent configs and registration endpoints (#17712)	1 year ago
Matt Keeler	baaf6d84c7	Add generic experiments configuration and use it to enable catalog v2 resources (#17604) ... * Add generic experiments configuration and use it to enable catalog v2 resources * Run formatting with -s as CI will validate that this has been done	1 year ago
Nick Ethier	44f90132e0	hoststats: add package for collecting host statistics including cpu memory and disk usage (#17038)	2 years ago
Dan Bond	95f462d5f1	agent: prevent very old servers re-joining a cluster with stale data (#17171) ... * agent: configure server lastseen timestamp Signed-off-by: Dan Bond <danbond@protonmail.com> * use correct config Signed-off-by: Dan Bond <danbond@protonmail.com> * add comments Signed-off-by: Dan Bond <danbond@protonmail.com> * use default age in test golden data Signed-off-by: Dan Bond <danbond@protonmail.com> * add changelog Signed-off-by: Dan Bond <danbond@protonmail.com> * fix runtime test Signed-off-by: Dan Bond <danbond@protonmail.com> * agent: add server_metadata Signed-off-by: Dan Bond <danbond@protonmail.com> * update comments Signed-off-by: Dan Bond <danbond@protonmail.com> * correctly check if metadata file does not exist Signed-off-by: Dan Bond <danbond@protonmail.com> * follow instructions for adding new config Signed-off-by: Dan Bond <danbond@protonmail.com> * add comments Signed-off-by: Dan Bond <danbond@protonmail.com> * update comments Signed-off-by: Dan Bond <danbond@protonmail.com> * Update agent/agent.go Co-authored-by: Dan Upton <daniel@floppy.co> * agent/config: add validation for duration with min Signed-off-by: Dan Bond <danbond@protonmail.com> * docs: add new server_rejoin_age_max config definition Signed-off-by: Dan Bond <danbond@protonmail.com> * agent: add unit test for checking server last seen Signed-off-by: Dan Bond <danbond@protonmail.com> * agent: log continually for 60s before erroring Signed-off-by: Dan Bond <danbond@protonmail.com> * pr comments Signed-off-by: Dan Bond <danbond@protonmail.com> * remove unneeded todo * agent: fix error message Signed-off-by: Dan Bond <danbond@protonmail.com> --------- Signed-off-by: Dan Bond <danbond@protonmail.com> Co-authored-by: Dan Upton <daniel@floppy.co>	2 years ago
Freddy	e02ef16f02	Update HCP bootstrapping to support existing clusters (#16916) ... * Persist HCP management token from server config We want to move away from injecting an initial management token into Consul clusters linked to HCP. The reasoning is that by using a separate class of token we can have more flexibility in terms of allowing HCP's token to co-exist with the user's management token. Down the line we can also more easily adjust the permissions attached to HCP's token to limit it's scope. With these changes, the cloud management token is like the initial management token in that iit has the same global management policy and if it is created it effectively bootstraps the ACL system. * Update SDK and mock HCP server The HCP management token will now be sent in a special field rather than as Consul's "initial management" token configuration. This commit also updates the mock HCP server to more accurately reflect the behavior of the CCM backend. * Refactor HCP bootstrapping logic and add tests We want to allow users to link Consul clusters that already exist to HCP. Existing clusters need care when bootstrapped by HCP, since we do not want to do things like change ACL/TLS settings for a running cluster. Additional changes: * Deconstruct MaybeBootstrap so that it can be tested. The HCP Go SDK requires HTTPS to fetch a token from the Auth URL, even if the backend server is mocked. By pulling the hcp.Client creation out we can modify its TLS configuration in tests while keeping the secure behavior in production code. * Add light validation for data received/loaded. * Sanitize initial_management token from received config, since HCP will only ever use the CloudConfig.MangementToken. * Add changelog entry	2 years ago
Ronald	94ec4eb2f4	copyright headers for agent folder (#16704) ... * copyright headers for agent folder * Ignore test data files * fix proto files and remove headers in agent/uiserver folder * ignore deep-copy files	2 years ago
cskh	7f6f6891f7	fix: gracefully fail on invalid port number (#16721)	2 years ago
Eric Haberkorn	dbaf8bf49c	add agent locality and replicate it across peer streams (#16522)	2 years ago
R.B. Boyer	9a485cdb49	proxycfg: ensure that an irrecoverable error in proxycfg closes the xds session and triggers a replacement proxycfg watcher (#16497) ... Receiving an "acl not found" error from an RPC in the agent cache and the streaming/event components will cause any request loops to cease under the assumption that they will never work again if the token was destroyed. This prevents log spam (#14144, #9738). Unfortunately due to things like: - authz requests going to stale servers that may not have witnessed the token creation yet - authz requests in a secondary datacenter happening before the tokens get replicated to that datacenter - authz requests from a primary TO a secondary datacenter happening before the tokens get replicated to that datacenter The caller will get an "acl not found" *before* the token exists, rather than just after. The machinery added above in the linked PRs will kick in and prevent the request loop from looping around again once the tokens actually exist. For `consul-dataplane` usages, where xDS is served by the Consul servers rather than the clients ultimately this is not a problem because in that scenario the `agent/proxycfg` machinery is on-demand and launched by a new xDS stream needing data for a specific service in the catalog. If the watching goroutines are terminated it ripples down and terminates the xDS stream, which CDP will eventually re-establish and restart everything. For Consul client usages, the `agent/proxycfg` machinery is ahead-of-time launched at service registration time (called "local" in some of the proxycfg machinery) so when the xDS stream comes in the data is already ready to go. If the watching goroutines terminate it should terminate the xDS stream, but there's no mechanism to re-spawn the watching goroutines. If the xDS stream reconnects it will see no `ConfigSnapshot` and will not get one again until the client agent is restarted, or the service is re-registered with something changed in it. This PR fixes a few things in the machinery: - there was an inadvertent deadlock in fetching snapshot from the proxycfg machinery by xDS, such that when the watching goroutine terminated the snapshots would never be fetched. This caused some of the xDS machinery to get indefinitely paused and not finish the teardown properly. - Every 30s we now attempt to re-insert all locally registered services into the proxycfg machinery. - When services are re-inserted into the proxycfg machinery we special case "dead" ones such that we unilaterally replace them rather that doing that conditionally.	2 years ago
Semir Patel	8979e64a94	Bump x/time to 0.3.0 and fix related breakage linked to RPCRateLimit (#16241) ... * Bump x/time to 0.3.0 and fix related breakage linked to RPCRateLimit initialization * Apply limitVal(...) to other rate.Limit config fields	2 years ago
Nathan Coleman	72a73661c9	Implement APIGateway proxycfg snapshot (#16194) ... * Stub proxycfg handler for API gateway * Add Service Kind constants/handling for API Gateway * Begin stubbing for SDS * Add new Secret type to xDS order of operations * Continue stubbing of SDS * Iterate on proxycfg handler for API gateway * Handle BoundAPIGateway config entry subscription in proxycfg-glue * Add API gateway to config snapshot validation * Add API gateway to config snapshot clone, leaf, etc. * Subscribe to bound route + cert config entries on bound-api-gateway * Track routes + certs on API gateway config snapshot * Generate DeepCopy() for types used in watch.Map * Watch all active references on api-gateway, unwatch inactive * Track loading of initial bound-api-gateway config entry * Use proper proto package for SDS mapping * Use ResourceReference instead of ServiceName, collect resources * Fix typo, add + remove TODOs * Watch discovery chains for TCPRoute * Add TODO for updating gateway services for api-gateway * make proto * Regenerate deep-copy for proxycfg * Set datacenter on upstream ID from query source * Watch discovery chains for http-route service backends * Add ServiceName getter to HTTP+TCP Service structs * Clean up unwatched discovery chains on API Gateway * Implement watch for ingress leaf certificate * Collect upstreams on http-route + tcp-route updates * Remove unused GatewayServices update handler * Remove unnecessary gateway services logic for API Gateway * Remove outdate TODO * Use .ToIngress where appropriate, including TODO for cleaning up * Cancel before returning error * Remove GatewayServices subscription * Add godoc for handlerAPIGateway functions * Update terminology from Connect => Consul Service Mesh Consistent with terminology changes in https://github.com/hashicorp/consul/pull/12690 * Add missing TODO * Remove duplicate switch case * Rerun deep-copy generator * Use correct property on config snapshot * Remove unnecessary leaf cert watch * Clean up based on code review feedback * Note handler properties that are initialized but set elsewhere * Add TODO for moving helper func into structs pkg * Update generated DeepCopy code * gofmt * Generate DeepCopy() for API gateway listener types * Improve variable name * Regenerate DeepCopy() code * Fix linting issue * Temporarily remove the secret type from resource generation	2 years ago
Paul Banks	5397e9ee7f	Adding experimental support for a more efficient LogStore implementation (#16176) ... * Adding experimental support for a more efficient LogStore implementation * Adding changelog entry * Fix go mod tidy issues	2 years ago
Paul Glass	f5231b9157	Add new config_file_service_registration token (#15828)	2 years ago
Nick Irvine	6fb628c07d	fix: return error when config file with unknown extension is passed (#15107)	2 years ago
Paul Glass	619032cfcd	Deprecate -join and -join-wan (#15598)	2 years ago
John Murret	e027c94b52	adding config for request_limits (#15531) ... * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Add handler errors * Set the global read and write limits * fixing multilimiter moving packages * Fix typo * Simplify globalLimit usage * add multilimiter and tests * exporting LimitedEntity * Apply suggestions from code review Co-authored-by: John Murret <john.murret@hashicorp.com> * add config update and rename config params * add doc string and split config * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * use timer to avoid go routine leak and change the interface * add comments to tests * fix failing test * add prefix with config edge, refactor tests * Apply suggestions from code review Co-authored-by: Dan Upton <daniel@floppy.co> * refactor to apply configs for limiters under a prefix * add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic * make KeyType an exported type * split the config and limiter trees to fix race conditions in config update * rename variables * fix race in test and remove dead code * fix reconcile loop to not create a timer on each loop * add extra benchmark tests and fix tests * fix benchmark test to pass value to func * server: add placeholder glue for rate limit handler This commit adds a no-op implementation of the rate-limit handler and adds it to the `consul.Server` struct and setup code. This allows us to start working on the net/rpc and gRPC interceptors and config logic. * Set the global read and write limits * fixing multilimiter moving packages * add server configuration for global rate limiting. * remove agent test * remove added stuff from handler * remove added stuff from multilimiter * removing unnecessary TODOs * Removing TODO comment from handler * adding in defaulting to infinite * add disabled status in there * adding in documentation for disabled mode. * make disabled the default. * Add mock and agent test * addig documentation and missing mock file. * Fixing test TestLoad_IntegrationWithFlags * updating docs based on PR feedback. * Updating Request Limits mode to use int based on PR feedback. * Adding RequestLimits struct so we have a nested struct in ReloadableConfig. * fixing linting references * Update agent/consul/rate/handler.go Co-authored-by: Dan Upton <daniel@floppy.co> * Update agent/consul/config.go Co-authored-by: Dan Upton <daniel@floppy.co> * removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf * added conversion function to convert request limits object to handler config. * Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well. * Updating values for TestLoad_FullConfig() so that they were different and discernable. * Updating TestRuntimeConfig_Sanitize * Fixing TestLoad_IntegrationWithFlags test * putting nil check in place * fixing rebase * removing change for missing error checks. will put in another PR * Rebasing after default multilimiter config change * resolving rebase issues * updating reference for incomingRPCLimiter to use interface * updating interface * Updating interfaces * Fixing mock reference Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>	2 years ago
Eric Haberkorn	4268c1c25c	Remove the `connect.enable_serverless_plugin` agent configuration option (#15710)	2 years ago
Kyle Havlovitz	f4c3e54b11	auto-config: relax node name validation for JWT authorization (#15370) ... * auto-config: relax node name validation for JWT authorization This changes the JWT authorization logic to allow all non-whitespace, non-quote characters when validating node names. Consul had previously allowed these characters in node names, until this validation was added to fix a security vulnerability with whitespace/quotes being passed to the `bexpr` library. This unintentionally broke node names with characters like `.` which aren't related to this vulnerability. * Update website/content/docs/agent/config/cli-flags.mdx Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com> Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com>	2 years ago
Derek Menteer	931cec42b3	Prevent serving TLS via ports.grpc (#15339) ... Prevent serving TLS via ports.grpc We remove the ability to run the ports.grpc in TLS mode to avoid confusion and to simplify configuration. This breaking change ensures that any user currently using ports.grpc in an encrypted mode will receive an error message indicating that ports.grpc_tls must be explicitly used. The suggested action for these users is to simply swap their ports.grpc to ports.grpc_tls in the configuration file. If both ports are defined, or if the user has not configured TLS for grpc, then the error message will not be printed.	2 years ago
Kyle Schochenmaier	bf0f61a878	removes ioutil usage everywhere which was deprecated in go1.16 (#15297) ... * update go version to 1.18 for api and sdk, go mod tidy * removes ioutil usage everywhere which was deprecated in go1.16 in favour of io and os packages. Also introduces a lint rule which forbids use of ioutil going forward. Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>	2 years ago
malizz	b9a9e1219c	update config defaults, add docs (#15302) ... * update config defaults, add docs * update grpc tls port for non-default values * add changelog * Update website/content/docs/upgrading/upgrade-specific.mdx Co-authored-by: Derek Menteer <105233703+hashi-derek@users.noreply.github.com> * Update website/content/docs/agent/config/config-files.mdx Co-authored-by: Derek Menteer <105233703+hashi-derek@users.noreply.github.com> * update logic for setting grpc tls port value * move default config to default.go, update changelog * update docs * Fix config tests. * Fix linter error. * Fix ConnectCA tests. * Cleanup markdown on upgrade notes. Co-authored-by: Derek Menteer <105233703+hashi-derek@users.noreply.github.com> Co-authored-by: Derek Menteer <derek.menteer@hashicorp.com>	2 years ago
Chris S. Kim	29a297d3e9	Refactor client RPC timeouts (#14965) ... Fix an issue where rpc_hold_timeout was being used as the timeout for non-blocking queries. Users should be able to tune read timeouts without fiddling with rpc_hold_timeout. A new configuration `rpc_read_timeout` is created. Refactor some implementation from the original PR 11500 to remove the misleading linkage between RPCInfo's timeout (used to retry in case of certain modes of failures) and the client RPC timeouts.	2 years ago
Chris S. Kim	3d2dffff16	Merge pull request #13388 from deblasis/feature/health-checks_windows_service ... Feature: Health checks windows service	2 years ago
Dan Upton	328e3ff563	proxycfg: rate-limit delivery of config snapshots (#14960) ... Adds a user-configurable rate limiter to proxycfg snapshot delivery, with a default limit of 250 updates per second. This addresses a problem observed in our load testing of Consul Dataplane where updating a "global" resource such as a wildcard intention or the proxy-defaults config entry could starve the Raft or Memberlist goroutines of CPU time, causing general cluster instability.	2 years ago
Hans Hasselberg	0d5935ab83	adding configuration option cloud.scada_address (#14936) ... * adding scada_address * config tests * add changelog entry	2 years ago
cskh	c1b5f34fb7	fix: missing UDP field in checkType (#14885) ... * fix: missing UDP field in checkType * Add changelog * Update doc	2 years ago
Nick Ethier	1c1b0994b8	add HCP integration component (#14723) ... * add HCP integration * lint: use non-deprecated logging interface	2 years ago
freddygv	5fbb26525b	Add awareness of server mode to TLS configurator ... Preivously the TLS configurator would default to presenting auto TLS certificates as client certificates. Server agents should not have this behavior and should instead present the manually configured certs. The autoTLS certs for servers are exclusively used for peering and should not be used as the default for outbound communication.	2 years ago
Derek Menteer	1255a8a20d	Add separate grpc_tls port. ... To ease the transition for users, the original gRPC port can still operate in a deprecated mode as either plain-text or TLS mode. This behavior should be removed in a future release whenever we no longer support this. The resulting behavior from this commit is: `ports.grpc > 0 && ports.grpc_tls > 0` spawns both plain-text and tls ports. `ports.grpc > 0 && grpc.tls == undefined` spawns a single plain-text port. `ports.grpc > 0 && grpc.tls != undefined` spawns a single tls port (backwards compat mode).	2 years ago
Alessandro De Blasis	f3437eaf05	Merge remote-tracking branch 'hashicorp/main' into feature/health-checks_windows_service ... Signed-off-by: Alessandro De Blasis <alex@deblasis.net>	2 years ago
Pablo Ruiz García	1f293e5244	Added new auto_encrypt.grpc_server_tls config option to control AutoTLS enabling of GRPC Server's TLS usage ... Fix for #14253 Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com>	2 years ago
Alessandro De Blasis	5dee555888	Merge remote-tracking branch 'hashicorp/main' into feature/health-checks_windows_service ... Signed-off-by: Alessandro De Blasis <alex@deblasis.net>	2 years ago
Alessandro De Blasis	ab611eabc3	Merge remote-tracking branch 'hashicorp/main' into feature/health-checks_windows_service ... Signed-off-by: Alessandro De Blasis <alex@deblasis.net>	2 years ago