* Add validation of MeshGateway name + listeners
* Adds test for ValidateMeshGateway
* Fixes data fetcher test for gatewayproxy
---------
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
[NET-6429] Program ProxyStateTemplate to route cross-partition traffic to the correct destination mesh gateway
* Program mesh port to route wildcarded gateway SNI to the appropriate remote partition's mesh gateway
* Update target + route ports in service endpoint refs when building PST
* Use proper name of local datacenter when constructing SNI for gateway target
* Use destination identities for TLS when routing L4 traffic through the mesh gateway
* Use new constants, move comment to correct location
* Use new constants for port names
* Update test assertions
* Undo debug logging change
Update Vault/Nomad versions to ensure we're testing all the latest versions.
Update Vault/Nomad versions to ensure we're testing all the latest versions .
* Use a full EndpointRef on ComputedRoutes targets instead of just the ID
Today, the `ComputedRoutes` targets have the appropriate ID set for their `ServiceEndpoints` reference; however, the `MeshPort` and `RoutePort` are assumed to be that of the target when adding the endpoints reference in the sidecar's `ProxyStateTemplate`.
This is problematic when the target lives behind a `MeshGateway` and the `Mesh/RoutePort` used in the sidecar's `ProxyStateTemplate` should be that of the `MeshGateway` instead of the target.
Instead of assuming the `MeshPort` and `RoutePort` when building the `ProxyStateTemplate` for the sidecar, let's just add the full `EndpointRef` -- including the ID and the ports -- when hydrating the computed destinations.
* Make sure the UID from the existing ServiceEndpoints makes it onto ComputedRoutes
* Update test assertions
* Undo confusing whitespace change
* Remove one-line function wrapper
* Use plural name for endpoints ref
* Add constants for gateway name, kind and port names
NET-6653 Enabling container logs when initConsulServers fails and return an error (container logs during launch() failure)
On branch NET-6653
modified: testing/deployer/sprawl/boot.go
* Add Stop method to telemetry provider
Stop the main loop of the provider and set the config
to disabled.
* Add interface for telemetry provider
Added for easier testing. Also renamed Run to Start, which better
fits with Stop.
* Add Stop method to HCP manager
* Add manager interface, rename implementation
Add interface for easier testing, rename existing Manager to HCPManager.
* Stop HCP manager in link Finalizer
* Attempt to cleanup if resource has been deleted
The link should be cleaned up by the finalizer, but there's an edge
case in a multi-server setup where the link is fully deleted on one
server before the other server reconciles. This will cover the case
where the reconcile happens after the resource is deleted.
* Add a delete mananagement token function
Passes a function to the HCP manager that deletes the management token
that was initially created by the manager.
* Delete token as part of stopping the manager
* Lock around disabling config, remove descriptions
* Update nvmrc to use v18, next to v14 and npm to v9.6.7
* Update husky pre-commit hook to v9; updated Husky to v9; updated node version in website readme
* Updated @hashicorp/platform-cli
* Check for ACL write permissions on write
Link eventually will be creating a token, so require acl:write.
* Convert Run to Start, only allow to start once
* Always initialize HCP components at startup
* Support for updating config and client
* Pass HCP manager to controller
* Start HCP manager in link resource
Start as part of link creation rather than always starting. Update
the HCP manager with values from the link before starting as well.
* Fix metrics sink leaked goroutine
* Remove the hardcoded disabled hostname prefix
The HCP metrics sink will always be enabled, so the length of sinks will
always be greater than zero. This also means that we will also always
default to prefixing metrics with the hostname, which is what our
documentation states is the expected behavior anyway.
* Add changelog
* Check and set running status in one method
* Check for primary datacenter, add back test
* Clarify merge reasoning, fix timing issue in test
* Add comment about controller placement
* Expand on breaking change, fix typo in changelog
* Update ui server to include V2 Catalog flag
* Fix typo
* Add route and redirects for the unavailable warning
* Add qualtrics link
* Remove unneccessary check and redirect
[OG Author: michael.zalimeni@hashicorp.com, rebase needed a separate PR]
* v2: support virtual port in Service port references
In addition to Service target port references, allow users to specify a
port by stringified virtual port value. This is useful in environments
such as Kubernetes where typical configuration is written in terms of
Service virtual ports rather than workload (pod) target port names.
Retaining the option of referencing target ports by name supports VMs,
Nomad, and other use cases where virtual ports are not used by default.
To support both uses cases at once, we will strictly interpret port
references based on whether the value is numeric. See updated
`ServicePort` docs for more details.
* v2: update service ref docs for virtual port support
Update proto and generated .go files with docs reflecting virtual port
reference support.
* v2: add virtual port references to L7 topo test
Add coverage for mixed virtual and target port references to existing
test.
* update failover policy controller tests to work with computed failover policy and assert error conditions against FailoverPolicy and ComputedFailoverPolicy resources
* accumulate services; don't overwrite them in enterprise
---------
Co-authored-by: Michael Zalimeni <michael.zalimeni@hashicorp.com>
Co-authored-by: R.B. Boyer <rb@hashicorp.com>
* Convert consul-hcp to a simpler component
* update existing test to use envStub helper
* Add missing copyright - weird no one yelled about this
* remove consul-hcp from load
* remove this test that doesn't run anymore
The docker image used in CICD was referencing `registry.k8s.io/pause:3.3`,
which appears to no longer function correctly. This commit swaps over to a
Hashicorp mirrored image that shouldn't have rate limits or disappearing
images.
* If a workload does not implement a port, it should not be included in the list of endpoints for the Envoy cluster for that port.
* Adds tenancy tests for xds controller and xdsv2 resource generation, and adds all those files.
* The original change in this PR was for filtering the list of endpoints by the port being routed to (bullet 1). Since I made changes to sidecarproxycontroller golden files, I realized some of the golden files were unused because of the tenancy changes, so when I deleted those, that broke xds controller tests which weren't correctly using tenancy. So when I fixed that, then the xdsv2 tests broke, so I added tenancy support there too. So now, from sidecarproxy controller -> xds controller -> xdsv2 we now have tenancy support and all the golden files are lined up.
* feat: add api call to hcp/link endpoint
* updated
* updated
* update approach to get the linking status
* updated application template
* feat: add api call to hcp/link endpoint
* updated
* updated
* update approach to get the linking status
* updated application template
* update purple banner links
* Hook up the linked check to the purple banner
* fixed lint issue
* Updated tests for new link status API calls as args instead of from service
---------
Co-authored-by: Chris Hut <tophernuts@gmail.com>
* API Gateway proto
* fix lint issue
* new line
* run make proto format
* checkpoint
* stub
* Update internal/mesh/internal/controllers/apigateways/controller.go
* Change logging of registered v2 resource endpoints to add /api prefix
Previous:
agent.http: Registered resource endpoint: endpoint=/demo/v1/executive
New:
agent.http: Registered resource endpoint: endpoint=/api/demo/v1/executive
This reduces confusion when attempting to call the APIs after looking at
the logs.
* Add Link API docs
* Update website/content/api-docs/hcp-link.mdx
Co-authored-by: Melissa Kam <3768460+mkam@users.noreply.github.com>
* Update website/content/api-docs/hcp-link.mdx
Co-authored-by: Melissa Kam <3768460+mkam@users.noreply.github.com>
* Update website/content/api-docs/hcp-link.mdx
Co-authored-by: Tu Nguyen <im2nguyen@users.noreply.github.com>
* Update website/content/api-docs/hcp-link.mdx
Co-authored-by: Tu Nguyen <im2nguyen@users.noreply.github.com>
* Update website/content/api-docs/hcp-link.mdx
Co-authored-by: Tu Nguyen <im2nguyen@users.noreply.github.com>
* Add summary sentence and move api vs config section up
* Add hcp link endpoint to API Overview page
* Update website/content/api-docs/index.mdx
Co-authored-by: Tu Nguyen <im2nguyen@users.noreply.github.com>
* Update note about v1 API endpoint prefix
* Add a period at end of v1 prefix note.
* Add link to HCP Consul Central
---------
Co-authored-by: Melissa Kam <3768460+mkam@users.noreply.github.com>
Co-authored-by: Tu Nguyen <im2nguyen@users.noreply.github.com>
Heat Hamilton