39 Commits (b2a0251f66b4b1f47f79aaa051c553cfa7cdf88f)

Author	SHA1	Message	Date
Kyle Havlovitz	f14c54e25e	Add TLS option and DNS SAN support to ingress config ... xds: Only set TLS context for ingress listener when requested	5 years ago
Chris Piraino	f40833d094	Allow Hosts field to be set on an ingress config entry ... - Validate that this cannot be set on a 'tcp' listener nor on a wildcard service. - Add Hosts field to api and test in consul config write CLI - xds: Configure envoy with user-provided hosts from ingress gateways	5 years ago
Kyle Havlovitz	711d1389aa	Support multiple listeners referencing the same service in gateway definitions	5 years ago
Kyle Havlovitz	247f9eaf13	Allow ingress gateways to route traffic based on Host header ... This commit adds the necessary changes to allow an ingress gateway to route traffic from a single defined port to multiple different upstream services in the Consul mesh. To do this, we now require all HTTP requests coming into the ingress gateway to specify a Host header that matches "<service-name>.*" in order to correctly route traffic to the correct service. - Differentiate multiple listener's route names by port - Adds a case in xds for allowing default discovery chains to create a route configuration when on an ingress gateway. This allows default services to easily use host header routing - ingress-gateways have a single route config for each listener that utilizes domain matching to route to different services.	5 years ago
Freddy	137a2c32c6	TLS Origination for Terminating Gateways (#7671)	5 years ago
freddygv	eddd5bd73b	PR comments	5 years ago
freddygv	6abc71f915	Skip filter chain creation if no client cert	5 years ago
freddygv	840d27a9d5	Un-nest switch in gateway update handler	5 years ago
freddygv	913b13f31f	Add subset support	5 years ago
freddygv	24207226ca	Add proxycfg state management for terminating-gateways	5 years ago
Kyle Havlovitz	e9e8c0e730	Ingress Gateways for TCP services (#7509) ... * Implements a simple, tcp ingress gateway workflow This adds a new type of gateway for allowing Ingress traffic into Connect from external services. Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>	5 years ago
Chris Piraino	584f90bbeb	Fix flapping of mesh gateway connect-service watches (#7575)	5 years ago
R.B. Boyer	6adad71125	wan federation via mesh gateways (#6884) ... This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.	5 years ago
Lars Lehtonen	6bcd596539	agent/proxycfg: fix dropped error in state.initWatchesMeshGateway() (#7267)	5 years ago
Matt Keeler	9e5fd7f925	OSS Changes for various config entry namespacing bugs (#7226)	5 years ago
Matt Keeler	dfb0177dbc	Testing updates to support namespaced testing of the agent/xds… (#7185) ... * Various testing updates to support namespaced testing of the agent/xds package * agent/proxycfg package updates to support better namespace testing	5 years ago
Chris Piraino	401221de58	Allow users to configure either unstructured or JSON logging (#7130) ... * hclog Allow users to choose between unstructured and JSON logging	5 years ago
Matt Keeler	c09693e545	Updates to Config Entries and Connect for Namespaces (#7116)	5 years ago
Matt Keeler	27f49eede9	Move where the service-resolver watch is done so that it happen… (#7025) ... Before we were issuing 1 watch for every service in the services listing which would have caused the agent to process many more identical events simultaneously.	5 years ago
R.B. Boyer	97aa050c20	agent: allow mesh gateways to initialize even if there are no connect services registered yet (#6576) ... Fixes #6543 Also improved some of the proxycfg tests to cover snapshot validity better.	5 years ago
R.B. Boyer	9566df524e	agent: cache notifications work after error if the underlying RPC returns index=1 (#6547) ... Fixes #6521 Ensure that initial failures to fetch an agent cache entry using the notify API where the underlying RPC returns a synthetic index of 1 correctly recovers when those RPCs resume working. The bug in the Cache.notifyBlockingQuery used to incorrectly "fix" the index for the next query from 0 to 1 for all queries, when it should have not done so for queries that errored. Also fixed some things that made debugging difficult: - config entry read/list endpoints send back QueryMeta headers - xds event loops don't swallow the cache notification errors	5 years ago
Freddy	fdd10dd8b8	Expose HTTP-based paths through Connect proxy (#6446) ... Fixes: #5396 This PR adds a proxy configuration stanza called expose. These flags register listeners in Connect sidecar proxies to allow requests to specific HTTP paths from outside of the node. This allows services to protect themselves by only listening on the loopback interface, while still accepting traffic from non Connect-enabled services. Under expose there is a boolean checks flag that would automatically expose all registered HTTP and gRPC check paths. This stanza also accepts a paths list to expose individual paths. The primary use case for this functionality would be to expose paths for third parties like Prometheus or the kubelet. Listeners for requests to exposed paths are be configured dynamically at run time. Any time a proxy, or check can be registered, a listener can also be created. In this initial implementation requests to these paths are not authenticated/encrypted.	5 years ago
R.B. Boyer	8e22d80e35	connect: fix failover through a mesh gateway to a remote datacenter (#6259) ... Failover is pushed entirely down to the data plane by creating envoy clusters and putting each successive destination in a different load assignment priority band. For example this shows that normally requests go to 1.2.3.4:8080 but when that fails they go to 6.7.8.9:8080: - name: foo load_assignment: cluster_name: foo policy: overprovisioning_factor: 100000 endpoints: - priority: 0 lb_endpoints: - endpoint: address: socket_address: address: 1.2.3.4 port_value: 8080 - priority: 1 lb_endpoints: - endpoint: address: socket_address: address: 6.7.8.9 port_value: 8080 Mesh gateways route requests based solely on the SNI header tacked onto the TLS layer. Envoy currently only lets you configure the outbound SNI header at the cluster layer. If you try to failover through a mesh gateway you ideally would configure the SNI value per endpoint, but that's not possible in envoy today. This PR introduces a simpler way around the problem for now: 1. We identify any target of failover that will use mesh gateway mode local or remote and then further isolate any resolver node in the compiled discovery chain that has a failover destination set to one of those targets. 2. For each of these resolvers we will perform a small measurement of comparative healths of the endpoints that come back from the health API for the set of primary target and serial failover targets. We walk the list of targets in order and if any endpoint is healthy we return that target, otherwise we move on to the next target. 3. The CDS and EDS endpoints both perform the measurements in (2) for the affected resolver nodes. 4. For CDS this measurement selects which TLS SNI field to use for the cluster (note the cluster is always going to be named for the primary target) 5. For EDS this measurement selects which set of endpoints will populate the cluster. Priority tiered failover is ignored. One of the big downsides to this approach to failover is that the failover detection and correction is going to be controlled by consul rather than deferring that entirely to the data plane as with the prior version. This also means that we are bound to only failover using official health signals and cannot make use of data plane signals like outlier detection to affect failover. In this specific scenario the lack of data plane signals is ok because the effectiveness is already muted by the fact that the ultimate destination endpoints will have their data plane signals scrambled when they pass through the mesh gateway wrapper anyway so we're not losing much. Another related fix is that we now use the endpoint health from the underlying service, not the health of the gateway (regardless of failover mode).	5 years ago
R.B. Boyer	c395affc93	connect: expose an API endpoint to compile the discovery chain (#6248) ... In addition to exposing compilation over the API cleaned up the structures that would be exchanged to be cleaner and easier to support and understand. Also removed ability to configure the envoy OverprovisioningFactor.	5 years ago
R.B. Boyer	f02924fafe	connect: simplify the compiled discovery chain data structures (#6242) ... This should make them better for sending over RPC or the API. Instead of a chain implemented explicitly like a linked list (nodes holding pointers to other nodes) instead switch to a flat map of named nodes with nodes linking other other nodes by name. The shipped structure is just a map and a string to indicate which key to start from. Other changes: * inline the compiler option InferDefaults as true * introduce compiled target config to avoid needing to send back additional maps of Resolvers; future target-specific compiled state can go here * move compiled MeshGateway out of the Resolver and into the TargetConfig where it makes more sense.	5 years ago
R.B. Boyer	6393edba53	connect: reconcile how upstream configuration works with discovery chains (#6225) ... * connect: reconcile how upstream configuration works with discovery chains The following upstream config fields for connect sidecars sanely integrate into discovery chain resolution: - Destination Namespace/Datacenter: Compilation occurs locally but using different default values for namespaces and datacenters. The xDS clusters that are created are named as they normally would be. - Mesh Gateway Mode (single upstream): If set this value overrides any value computed for any resolver for the entire discovery chain. The xDS clusters that are created may be named differently (see below). - Mesh Gateway Mode (whole sidecar): If set this value overrides any value computed for any resolver for the entire discovery chain. If this is specifically overridden for a single upstream this value is ignored in that case. The xDS clusters that are created may be named differently (see below). - Protocol (in opaque config): If set this value overrides the value computed when evaluating the entire discovery chain. If the normal chain would be TCP or if this override is set to TCP then the result is that we explicitly disable L7 Routing and Splitting. The xDS clusters that are created may be named differently (see below). - Connect Timeout (in opaque config): If set this value overrides the value for any resolver in the entire discovery chain. The xDS clusters that are created may be named differently (see below). If any of the above overrides affect the actual result of compiling the discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op override to "tcp") then the relevant parameters are hashed and provided to the xDS layer as a prefix for use in naming the Clusters. This is to ensure that if one Upstream discovery chain has no overrides and tangentially needs a cluster named "api.default.XXX", and another Upstream does have overrides for "api.default.XXX" that they won't cross-pollinate against the operator's wishes. Fixes #6159	5 years ago
R.B. Boyer	e039dfd7f8	connect: rework how the service resolver subset OnlyPassing flag works (#6173) ... The main change is that we no longer filter service instances by health, preferring instead to render all results down into EDS endpoints in envoy and merely label the endpoints as HEALTHY or UNHEALTHY. When OnlyPassing is set to true we will force consul checks in a 'warning' state to render as UNHEALTHY in envoy. Fixes #6171	5 years ago
Matt Keeler	4728329aeb	Various Gateway Fixes (#6093) ... * Ensure the mesh gateway configuration comes back in the api within each upstream * Add a test for the MeshGatewayConfig in the ToAPI functions * Ensure we don’t use gateways for dc local connections * Update the svc kind index for deletions * Replace the proxycfg.state cache with an interface for testing Also start implementing proxycfg state testing. * Update the state tests to verify some gateway watches for upstream-targets of a discovery chain.	5 years ago
R.B. Boyer	bcd2de3a2e	implement some missing service-router features and add more xDS testing (#6065) ... - also implement OnlyPassing filters for non-gateway clusters	5 years ago
Jack Pearkes	e6f1b78efb	Make cluster names SNI always (#6081) ... * Make cluster names SNI always * Update some tests * Ensure we check for prepared query types * Use sni for route cluster names * Proper mesh gateway mode defaulting when the discovery chain is used * Ignore service splits from PatchSliceOfMaps * Update some xds golden files for proper test output * Allow for grpc/http listeners/cluster configs with the disco chain * Update stats expectation	5 years ago
Matt Keeler	3d562bee5c	Fix Internal.ServiceDump blocking (#6076) ... maxIndexWatchTxn was only watching the IndexEntry of the max index of all the entries. It needed to watch all of them regardless of which was the max. Also plumbed the query source through in the proxy config to help better track requests.	5 years ago
Matt Keeler	a7421c160f	Implement mesh gateway management of service subsets ... Fixup some error handling	5 years ago
R.B. Boyer	4bdb690a25	activate most discovery chain features in xDS for envoy (#6024)	5 years ago
Matt Keeler	8d953f5840	Implement Mesh Gateways ... This includes both ingress and egress functionality.	5 years ago
Matt Keeler	813e009a2d	Prepare for having different service kinds that are all generic… (#6013) ... Default to internal error when service kind is unknown	6 years ago
Paul Banks	421ecd32fc	Connect: allow configuring Envoy for L7 Observability (#5558) ... * Add support for HTTP proxy listeners * Add customizable bootstrap configuration options * Debug logging for xDS AuthZ * Add Envoy Integration test suite with basic test coverage * Add envoy command tests to cover new cases * Add tracing integration test * Add gRPC support WIP * Merged changes from master Docker. get CI integration to work with same Dockerfile now * Make docker build optional for integration * Enable integration tests again! * http2 and grpc integration tests and fixes * Fix up command config tests * Store all container logs as artifacts in circle on fail * Add retries to outer part of stats measurements as we keep missing them in CI * Only dump logs on failing cases * Fix typos from code review * Review tidying and make tests pass again * Add debug logs to exec test. * Fix legit test failure caused by upstream rename in envoy config * Attempt to reduce cases of bad TLS handshake in CI integration tests * bring up the right service * Add prometheus integration test * Add test for denied AuthZ both HTTP and TCP * Try ANSI term for Circle	6 years ago
R.B. Boyer	f4a3b9d518	fix typos reported by golangci-lint:misspell (#5434)	6 years ago
Matt Keeler	7e6b3e6a0c	Implement prepared query upstreams watching for envoy (#5224) ... Fixes #4969 This implements non-blocking request polling at the cache layer which is currently only used for prepared queries. Additionally this enables the proxycfg manager to poll prepared queries for use in envoy proxy upstreams.	6 years ago
Paul Banks	0f27ffd163	Proxy Config Manager (#4729) ... * Proxy Config Manager This component watches for local state changes on the agent and ensures that each service registered locally with Kind == connect-proxy has it's state being actively populated in the cache. This serves two purposes: 1. For the built-in proxy, it ensures that the state needed to accept connections is available in RAM shortly after registration and likely before the proxy actually starts accepting traffic. 2. For (future - next PR) xDS server and other possible future proxies that require _push_ based config discovery, this provides a mechanism to subscribe and be notified about updates to a proxy instance's config including upstream service discovery results. * Address review comments * Better comments; Better delivery of latest snapshot for slow watchers; Embed Config * Comment typos * Add upstream Stringer for funsies	6 years ago