Commit Graph

63 Commits (ae307ba7a2cc9e96cd779a0023d1b99ba5c10a2b)

Author SHA1 Message Date
Freddy b3ec383d04
Gateway Services Nodes UI Endpoint (#7685)
The endpoint supports queries for both Ingress Gateways and Terminating Gateways. Used to display a gateway's linked services in the UI.
2020-05-11 11:35:17 -06:00
Chris Piraino 30792e933b Add test for adding DNSSAN for ConnectCALeaf cache type 2020-05-06 15:12:02 -05:00
Kyle Havlovitz f14c54e25e Add TLS option and DNS SAN support to ingress config
xds: Only set TLS context for ingress listener when requested
2020-05-06 15:12:02 -05:00
Freddy 137a2c32c6
TLS Origination for Terminating Gateways (#7671) 2020-04-27 16:25:37 -06:00
Daniel Nephin 5fe7043439 agent/cache: Make all cache options RegisterOptions
Previously the SupportsBlocking option was specified by a method on the
type, and all the other options were specified from RegisterOptions.

This change moves RegisterOptions to a method on the type, and moves
SupportsBlocking into the options struct.

Currently there are only 2 cache-types. So all cache-types can implement
this method by embedding a struct with those predefined values. In the
future if a cache type needs to be registered more than once with different
options it can remove the embedded type and implement the method in a way
that allows for paramaterization.
2020-04-16 18:56:34 -04:00
Kyle Havlovitz e9e8c0e730
Ingress Gateways for TCP services (#7509)
* Implements a simple, tcp ingress gateway workflow

This adds a new type of gateway for allowing Ingress traffic into Connect from external services.

Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>
2020-04-16 14:00:48 -07:00
sasha ac9b330f6b
add DNSSAN and IPSAN to cache key (#7597) 2020-04-15 10:11:11 -05:00
R.B. Boyer 6adad71125
wan federation via mesh gateways (#6884)
This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch:

There are several distinct chunks of code that are affected:

* new flags and config options for the server

* retry join WAN is slightly different

* retry join code is shared to discover primary mesh gateways from secondary datacenters

* because retry join logic runs in the *agent* and the results of that
  operation for primary mesh gateways are needed in the *server* there are
  some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur
  at multiple layers of abstraction just to pass the data down to the right
  layer.

* new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers

* the function signature for RPC dialing picked up a new required field (the
  node name of the destination)

* several new RPCs for manipulating a FederationState object:
  `FederationState:{Apply,Get,List,ListMeshGateways}`

* 3 read-only internal APIs for debugging use to invoke those RPCs from curl

* raft and fsm changes to persist these FederationStates

* replication for FederationStates as they are canonically stored in the
  Primary and replicated to the Secondaries.

* a special derivative of anti-entropy that runs in secondaries to snapshot
  their local mesh gateway `CheckServiceNodes` and sync them into their upstream
  FederationState in the primary (this works in conjunction with the
  replication to distribute addresses for all mesh gateways in all DCs to all
  other DCs)

* a "gateway locator" convenience object to make use of this data to choose
  the addresses of gateways to use for any given RPC or gossip operation to a
  remote DC. This gets data from the "retry join" logic in the agent and also
  directly calls into the FSM.

* RPC (`:8300`) on the server sniffs the first byte of a new connection to
  determine if it's actually doing native TLS. If so it checks the ALPN header
  for protocol determination (just like how the existing system uses the
  type-byte marker).

* 2 new kinds of protocols are exclusively decoded via this native TLS
  mechanism: one for ferrying "packet" operations (udp-like) from the gossip
  layer and one for "stream" operations (tcp-like). The packet operations
  re-use sockets (using length-prefixing) to cut down on TLS re-negotiation
  overhead.

* the server instances specially wrap the `memberlist.NetTransport` when running
  with gateway federation enabled (in a `wanfed.Transport`). The general gist is
  that if it tries to dial a node in the SAME datacenter (deduced by looking
  at the suffix of the node name) there is no change. If dialing a DIFFERENT
  datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh
  gateways to eventually end up in a server's :8300 port.

* a new flag when launching a mesh gateway via `consul connect envoy` to
  indicate that the servers are to be exposed. This sets a special service
  meta when registering the gateway into the catalog.

* `proxycfg/xds` notice this metadata blob to activate additional watches for
  the FederationState objects as well as the location of all of the consul
  servers in that datacenter.

* `xds:` if the extra metadata is in place additional clusters are defined in a
  DC to bulk sink all traffic to another DC's gateways. For the current
  datacenter we listen on a wildcard name (`server.<dc>.consul`) that load
  balances all servers as well as one mini-cluster per node
  (`<node>.server.<dc>.consul`)

* the `consul tls cert create` command got a new flag (`-node`) to help create
  an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 15:59:02 -05:00
Matt Keeler e231d62bc9
Make the config entry and leaf cert cache types ns aware (#7256) 2020-02-10 19:26:01 -05:00
Anthony Scalisi beb928f8de fix spelling errors (#7135) 2020-01-27 07:00:33 -06:00
Matt Keeler c09693e545
Updates to Config Entries and Connect for Namespaces (#7116) 2020-01-24 10:04:58 -05:00
Hans Hasselberg 87f32c8ba6
auto_encrypt: set dns and ip san for k8s and provide configuration (#6944)
* Add CreateCSRWithSAN
* Use CreateCSRWithSAN in auto_encrypt and cache
* Copy DNSNames and IPAddresses to cert
* Verify auto_encrypt.sign returns cert with SAN
* provide configuration options for auto_encrypt dnssan and ipsan
* rename CreateCSRWithSAN to CreateCSR
2020-01-17 23:25:26 +01:00
Matt Keeler 5934f803bf
Sync of OSS changes to support namespaces (#6909) 2019-12-09 21:26:41 -05:00
Todd Radel 54f92e2924 Make all Connect Cert Common Names valid FQDNs (#6423) 2019-11-11 17:11:54 +00:00
Paul Banks 87699eca2f
Fix support for RSA CA keys in Connect. (#6638)
* Allow RSA CA certs for consul and vault providers to correctly sign EC leaf certs.

* Ensure key type ad bits are populated from CA cert and clean up tests

* Add integration test and fix error when initializing secondary CA with RSA key.

* Add more tests, fix review feedback

* Update docs with key type config and output

* Apply suggestions from code review

Co-Authored-By: R.B. Boyer <rb@hashicorp.com>
2019-11-01 13:20:26 +00:00
R.B. Boyer c4b92d5534
connect: connect CA Roots in secondary datacenters should use a SigningKeyID derived from their local intermediate (#6513)
This fixes an issue where leaf certificates issued in secondary
datacenters would be reissued very frequently (every ~20 seconds)
because the logic meant to detect root rotation was errantly triggering
because a hash of the ultimate root (in the primary) was being compared
against a hash of the local intermediate root (in the secondary) and
always failing.
2019-09-26 11:54:14 -05:00
Freddy fdd10dd8b8
Expose HTTP-based paths through Connect proxy (#6446)
Fixes: #5396

This PR adds a proxy configuration stanza called expose. These flags register
listeners in Connect sidecar proxies to allow requests to specific HTTP paths from outside of the node. This allows services to protect themselves by only
listening on the loopback interface, while still accepting traffic from non
Connect-enabled services.

Under expose there is a boolean checks flag that would automatically expose all
registered HTTP and gRPC check paths.

This stanza also accepts a paths list to expose individual paths. The primary
use case for this functionality would be to expose paths for third parties like
Prometheus or the kubelet.

Listeners for requests to exposed paths are be configured dynamically at run
time. Any time a proxy, or check can be registered, a listener can also be
created.

In this initial implementation requests to these paths are not
authenticated/encrypted.
2019-09-25 20:55:52 -06:00
R.B. Boyer af01d397a5
connect: don't colon-hex-encode the AuthorityKeyId and SubjectKeyId fields in connect certs (#6492)
The fields in the certs are meant to hold the original binary
representation of this data, not some ascii-encoded version.

The only time we should be colon-hex-encoding fields is for display
purposes or marshaling through non-TLS mediums (like RPC).
2019-09-23 12:52:35 -05:00
R.B. Boyer 20eb0d3e94 cache: remove data race in agent cache
In normal operations there is a read/write race related to request
QueryOptions fields. An example race:

    WARNING: DATA RACE
    Read at 0x00c000836950 by goroutine 30:
      github.com/hashicorp/consul/agent/structs.(*ServiceConfigRequest).CacheInfo()
          /go/src/github.com/hashicorp/consul/agent/structs/config_entry.go:506 +0x109
      github.com/hashicorp/consul/agent/cache.(*Cache).getWithIndex()
          /go/src/github.com/hashicorp/consul/agent/cache/cache.go:262 +0x5c
      github.com/hashicorp/consul/agent/cache.(*Cache).notifyBlockingQuery()
          /go/src/github.com/hashicorp/consul/agent/cache/watch.go:89 +0xd7

    Previous write at 0x00c000836950 by goroutine 147:
      github.com/hashicorp/consul/agent/cache-types.(*ResolvedServiceConfig).Fetch()
          /go/src/github.com/hashicorp/consul/agent/cache-types/resolved_service_config.go:31 +0x219
      github.com/hashicorp/consul/agent/cache.(*Cache).fetch.func1()
          /go/src/github.com/hashicorp/consul/agent/cache/cache.go:495 +0x112

This patch does a lightweight copy of the request struct so that the
embedded QueryOptions fields that are mutated during Fetch() are scoped
to just that one RPC.
2019-09-12 16:18:01 -05:00
Alvin Huang c516fabfac
revert commits on master (#6413) 2019-08-27 17:45:58 -04:00
tradel 7f36a5b676 construct a common name for each CSR 2019-08-27 14:12:56 -07:00
R.B. Boyer 561b2fe606
connect: generate the full SNI names for discovery targets in the compiler rather than in the xds package (#6340) 2019-08-19 13:03:03 -05:00
R.B. Boyer 8e22d80e35
connect: fix failover through a mesh gateway to a remote datacenter (#6259)
Failover is pushed entirely down to the data plane by creating envoy
clusters and putting each successive destination in a different load
assignment priority band. For example this shows that normally requests
go to 1.2.3.4:8080 but when that fails they go to 6.7.8.9:8080:

- name: foo
  load_assignment:
    cluster_name: foo
    policy:
      overprovisioning_factor: 100000
    endpoints:
    - priority: 0
      lb_endpoints:
      - endpoint:
          address:
            socket_address:
              address: 1.2.3.4
              port_value: 8080
    - priority: 1
      lb_endpoints:
      - endpoint:
          address:
            socket_address:
              address: 6.7.8.9
              port_value: 8080

Mesh gateways route requests based solely on the SNI header tacked onto
the TLS layer. Envoy currently only lets you configure the outbound SNI
header at the cluster layer.

If you try to failover through a mesh gateway you ideally would
configure the SNI value per endpoint, but that's not possible in envoy
today.

This PR introduces a simpler way around the problem for now:

1. We identify any target of failover that will use mesh gateway mode local or
   remote and then further isolate any resolver node in the compiled discovery
   chain that has a failover destination set to one of those targets.

2. For each of these resolvers we will perform a small measurement of
   comparative healths of the endpoints that come back from the health API for the
   set of primary target and serial failover targets. We walk the list of targets
   in order and if any endpoint is healthy we return that target, otherwise we
   move on to the next target.

3. The CDS and EDS endpoints both perform the measurements in (2) for the
   affected resolver nodes.

4. For CDS this measurement selects which TLS SNI field to use for the cluster
   (note the cluster is always going to be named for the primary target)

5. For EDS this measurement selects which set of endpoints will populate the
   cluster. Priority tiered failover is ignored.

One of the big downsides to this approach to failover is that the failover
detection and correction is going to be controlled by consul rather than
deferring that entirely to the data plane as with the prior version. This also
means that we are bound to only failover using official health signals and
cannot make use of data plane signals like outlier detection to affect
failover.

In this specific scenario the lack of data plane signals is ok because the
effectiveness is already muted by the fact that the ultimate destination
endpoints will have their data plane signals scrambled when they pass through
the mesh gateway wrapper anyway so we're not losing much.

Another related fix is that we now use the endpoint health from the
underlying service, not the health of the gateway (regardless of
failover mode).
2019-08-05 13:30:35 -05:00
R.B. Boyer c395affc93
connect: expose an API endpoint to compile the discovery chain (#6248)
In addition to exposing compilation over the API cleaned up the structures that would be exchanged to be cleaner and easier to support and understand.

Also removed ability to configure the envoy OverprovisioningFactor.
2019-08-02 15:34:54 -05:00
R.B. Boyer 6393edba53
connect: reconcile how upstream configuration works with discovery chains (#6225)
* connect: reconcile how upstream configuration works with discovery chains

The following upstream config fields for connect sidecars sanely
integrate into discovery chain resolution:

- Destination Namespace/Datacenter: Compilation occurs locally but using
different default values for namespaces and datacenters. The xDS
clusters that are created are named as they normally would be.

- Mesh Gateway Mode (single upstream): If set this value overrides any
value computed for any resolver for the entire discovery chain. The xDS
clusters that are created may be named differently (see below).

- Mesh Gateway Mode (whole sidecar): If set this value overrides any
value computed for any resolver for the entire discovery chain. If this
is specifically overridden for a single upstream this value is ignored
in that case. The xDS clusters that are created may be named differently
(see below).

- Protocol (in opaque config): If set this value overrides the value
computed when evaluating the entire discovery chain. If the normal chain
would be TCP or if this override is set to TCP then the result is that
we explicitly disable L7 Routing and Splitting. The xDS clusters that
are created may be named differently (see below).

- Connect Timeout (in opaque config): If set this value overrides the
value for any resolver in the entire discovery chain. The xDS clusters
that are created may be named differently (see below).

If any of the above overrides affect the actual result of compiling the
discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op
override to "tcp") then the relevant parameters are hashed and provided
to the xDS layer as a prefix for use in naming the Clusters. This is to
ensure that if one Upstream discovery chain has no overrides and
tangentially needs a cluster named "api.default.XXX", and another
Upstream does have overrides for "api.default.XXX" that they won't
cross-pollinate against the operator's wishes.

Fixes #6159
2019-08-01 22:03:34 -05:00
Paul Banks e87cef2bb8 Revert "connect: support AWS PCA as a CA provider" (#6251)
This reverts commit 3497b7c00d.
2019-07-31 09:08:10 -04:00
Todd Radel 3497b7c00d
connect: support AWS PCA as a CA provider (#6189)
Port AWS PCA provider from consul-ent
2019-07-30 22:57:51 -04:00
R.B. Boyer e8132b61c0
add test for discovery chain agent cache-type (#6130) 2019-07-15 10:09:52 -05:00
Matt Keeler 3b6d5e382a Implement caching for config entry lists
Update agent/cache-types/config_entry.go

Co-Authored-By: R.B. Boyer <public@richardboyer.net>
2019-07-02 10:11:19 -04:00
R.B. Boyer 4bdb690a25
activate most discovery chain features in xDS for envoy (#6024) 2019-07-01 22:10:51 -05:00
Matt Keeler 3943e38133 Implement Kind based ServiceDump and caching of the ServiceDump RPC 2019-07-01 16:28:30 -04:00
hashicorp-ci 43bda6fb76 Merge Consul OSS branch 'master' at commit e91f73f592 2019-06-30 02:00:31 +00:00
Hans Hasselberg 33a7df3330
tls: auto_encrypt enables automatic RPC cert provisioning for consul clients (#5597) 2019-06-27 22:22:07 +02:00
Matt Keeler 43c5ba0304
New Cache Types (#5995)
* Add a cache type for the Catalog.ListServices endpoint

* Add a cache type for the Catalog.ListDatacenters endpoint
2019-06-24 14:11:34 -04:00
Paul Banks 0cfb6051ea Add integration test for central config; fix central config WIP (#5752)
* Add integration test for central config; fix central config WIP

* Add integration test for central config; fix central config WIP

* Set proxy protocol correctly and begin adding upstream support

* Add upstreams to service config cache key and start new notify watcher if they change.

This doesn't update the tests to pass though.

* Fix some merging logic get things working manually with a hack (TODO fix properly)

* Simplification to not allow enabling sidecars centrally - it makes no sense without upstreams anyway

* Test compile again and obvious ones pass. Lots of failures locally not debugged yet but may be flakes. Pushing up to see what CI does

* Fix up service manageer and API test failures

* Remove the enable command since it no longer makes much sense without being able to turn on sidecar proxies centrally

* Remove version.go hack - will make integration test fail until release

* Remove unused code from commands and upstream merge

* Re-bump version to 1.5.0
2019-05-01 16:39:31 -07:00
Kyle Havlovitz c269369760 Make central service config opt-in and rework the initial registration 2019-04-24 06:11:08 -07:00
Kyle Havlovitz 7c25869e67 Add the service registration manager to the agent 2019-04-23 00:17:27 -07:00
Jeff Mitchell 4243c3ae42
Move internal/ to sdk/ (#5568)
* Move internal/ to sdk/

* Add a readme to the SDK folder
2019-03-27 08:54:56 -04:00
Jeff Mitchell 47c390025b
Convert to Go Modules (#5517)
* First conversion

* Use serf 0.8.2 tag and associated updated deps

* * Move freeport and testutil into internal/

* Make internal/ its own module

* Update imports

* Add replace statements so API and normal Consul code are
self-referencing for ease of development

* Adapt to newer goe/values

* Bump to new cleanhttp

* Fix ban nonprintable chars test

* Update lock bad args test

The error message when the duration cannot be parsed changed in Go 1.12
(ae0c435877d3aacb9af5e706c40f9dddde5d3e67). This updates that test.

* Update another test as well

* Bump travis

* Bump circleci

* Bump go-discover and godo to get rid of launchpad dep

* Bump dockerfile go version

* fix tar command

* Bump go-cleanhttp
2019-03-26 17:04:58 -04:00
R.B. Boyer f4a3b9d518
fix typos reported by golangci-lint:misspell (#5434) 2019-03-06 11:13:28 -06:00
Aestek f1cdfbe40e Allow DNS interface to use agent cache (#5300)
Adds two new configuration parameters "dns_config.use_cache" and
"dns_config.cache_max_age" controlling how DNS requests use the agent
cache when querying servers.
2019-02-25 14:06:01 -05:00
Paul Banks ef9f27cbc8
connect: tame thundering herd of CSRs on CA rotation (#5228)
* Support rate limiting and concurrency limiting CSR requests on servers; handle CA rotations gracefully with jitter and backoff-on-rate-limit in client

* Add CSR rate limiting docs

* Fix config naming and add tests for new CA configs
2019-01-22 17:19:36 +00:00
Matt Keeler baa8946ea6
cache: Pass through wait query param to the cache.Get (#5203)
This adds a MaxQueryTime field to the connect ca leaf cache request type and populates it via the wait query param. The cache will then do the right thing and timeout the operation as expected if no new leaf cert is available within that time.

Fixes #4462 

The reproduction scenario in the original issue now times out appropriately.
2019-01-10 11:23:37 -05:00
Paul Banks 0638e09b6e
connect: agent leaf cert caching improvements (#5091)
* Add State storage and LastResult argument into Cache so that cache.Types can safely store additional data that is eventually expired.

* New Leaf cache type working and basic tests passing. TODO: more extensive testing for the Root change jitter across blocking requests, test concurrent fetches for different leaves interact nicely with rootsWatcher.

* Add multi-client and delayed rotation tests.

* Typos and cleanup error handling in roots watch

* Add comment about how the FetchResult can be used and change ca leaf state to use a non-pointer state.

* Plumb test override of root CA jitter through TestAgent so that tests are deterministic again!

* Fix failing config test
2019-01-10 12:46:11 +00:00
Paul Banks b29bc906ee
bugfix: use ServiceTags to generate cache key hash (#4987)
* bugfix: use ServiceTags to generate cahce key hash

* update unit test

* update

* remote print log

* Update .gitignore

* Completely deprecate ServiceTag field internally for clarity

* Add explicit test for CacheInfo cases
2019-01-07 21:30:47 +00:00
Paul Banks c9217c958e merge feedback: fix typos; actually use deliverLatest added previously but not plumbed in 2018-10-10 16:55:34 +01:00
Paul Banks a28e4a33b2 Fix bug in leaf-cert cache type where multiple client tokens collide (#4736)
* Fix bug in leaf-cert cache type where multiple clients with different tokens would share certs and block incorrectly

* Use hash for issued certs key to avoid ambiguity concatenating
2018-10-10 16:55:34 +01:00
Paul Banks 88388d760d Support Agent Caching for Service Discovery Results (#4541)
* Add cache types for catalog/services and health/services and basic test that caching works

* Support non-blocking cache types with Cache-Control semantics.

* Update API docs to include caching info for every endpoint.

* Comment updates per PR feedback.

* Add note on caching to the 10,000 foot view on the architecture page to make the new data path more clear.

* Document prepared query staleness quirk and force all background requests to AllowStale so we can spread service discovery load across servers.
2018-10-10 16:55:34 +01:00
Paul Banks 8cbeb29e73
Fixes #4421: General solution to stop blocking queries with index 0 (#4437)
* Fix theoretical cache collision bug if/when we use more cache types with same result type

* Generalized fix for blocking query handling when state store methods return zero index

* Refactor test retry to only affect CI

* Undo make file merge

* Add hint to error message returned to end-user requests if Connect is not enabled when they try to request cert

* Explicit error for Roots endpoint if connect is disabled

* Fix tests that were asserting old behaviour
2018-07-25 20:26:27 +01:00
Paul Banks 43b48bc06b Get agent cache tests passing without global hit count (which is racy).
Few other fixes in here just to get a clean run locally - they are all also fixed in other PRs but shouldn't conflict.

This should be robust to timing between goroutines now.
2018-06-25 12:25:37 -07:00