Adding coauthors who mobbed/paired at various points throughout last week.
Co-authored-by: Dan Stough <dan.stough@hashicorp.com>
Co-authored-by: Iryna Shustava <iryna@hashicorp.com>
Co-authored-by: John Murret <john.murret@hashicorp.com>
Co-authored-by: Michael Zalimeni <michael.zalimeni@hashicorp.com>
Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com>
Co-authored-by: Michael Wilkerson <mwilkerson@hashicorp.com>
Configure Envoy to use the same HTTP protocol version used by the
downstream caller when forwarding requests to a local application that
is configured with the protocol set to either `http2` or `grpc`.
This allows upstream applications that support both HTTP/1.1 and
HTTP/2 on a single port to receive requests using either protocol. This
is beneficial when the application primarily communicates using HTTP/2,
but also needs to support HTTP/1.1, such as to respond to Kubernetes
HTTP readiness/liveness probes.
Co-authored-by: Derek Menteer <derek.menteer@hashicorp.com>
Previously, when using implicit upstreams, we'd build outbound listener per destination instead of one for all destinations. This will result in port conflicts when trying to send this config to envoy.
This PR also makes sure that leaf and root references are always added (before we would only add it if there are inbound non-mesh ports).
Also, black-hole traffic when there are no inbound ports other than mesh
Reworks the sidecar controller to accept ComputedRoutes as an input and use it to generate appropriate ProxyStateTemplate resources containing L4/L7 mesh configuration.
The renaming of files from oss -> ce caused incorrect snapshots
to be created due to ce writes now happening prior to ent writes.
When this happens various entities will attempt to be restored
from the snapshot prior to a partition existing and will cause a
panic to occur.
* Refactors the leafcert package to not have a dependency on agent/consul and agent/cache to avoid import cycles. This way the xds controller can just import the leafcert package to use the leafcert manager.
The leaf cert logic in the controller:
* Sets up watches for leaf certs that are referenced in the ProxyStateTemplate (which generates the leaf certs too).
* Gets the leaf cert from the leaf cert cache
* Stores the leaf cert in the ProxyState that's pushed to xds
* For the cert watches, this PR also uses a bimapper + a thin wrapper to map leaf cert events to related ProxyStateTemplates
Since bimapper uses a resource.Reference or resource.ID to map between two resource types, I've created an internal type for a leaf certificate to use for the resource.Reference, since it's not a v2 resource.
The wrapper allows mapping events to resources (as opposed to mapping resources to resources)
The controller tests:
Unit: Ensure that we resolve leaf cert references
Lifecycle: Ensure that when the CA is updated, the leaf cert is as well
Also adds a new spiffe id type, and adds workload identity and workload identity URI to leaf certs. This is so certs are generated with the new workload identity based SPIFFE id.
* Pulls out some leaf cert test helpers into a helpers file so it
can be used in the xds controller tests.
* Wires up leaf cert manager dependency
* Support getting token from proxytracker
* Add workload identity spiffe id type to the authorize and sign functions
---------
Co-authored-by: John Murret <john.murret@hashicorp.com>
* mesh-controller: handle L4 protocols for a proxy without upstreams
* sidecar-controller: Support explicit destinations for L4 protocols and single ports.
* This controller generates and saves ProxyStateTemplate for sidecar proxies.
* It currently supports single-port L4 ports only.
* It keeps a cache of all destinations to make it easier to compute and retrieve destinations.
* It will update the status of the pbmesh.Upstreams resource if anything is invalid.
* endpoints-controller: add workload identity to the service endpoints resource
* small fixes
* review comments
* Address PR comments
* sidecar-proxy controller: Add support for transparent proxy
This currently does not support inferring destinations from intentions.
* PR review comments
* mesh-controller: handle L4 protocols for a proxy without upstreams
* sidecar-controller: Support explicit destinations for L4 protocols and single ports.
* This controller generates and saves ProxyStateTemplate for sidecar proxies.
* It currently supports single-port L4 ports only.
* It keeps a cache of all destinations to make it easier to compute and retrieve destinations.
* It will update the status of the pbmesh.Upstreams resource if anything is invalid.
* endpoints-controller: add workload identity to the service endpoints resource
* small fixes
* review comments
* Make sure endpoint refs route to mesh port instead of an app port
* Address PR comments
* fixing copyright
* tidy imports
* sidecar-proxy controller: Add support for transparent proxy
This currently does not support inferring destinations from intentions.
* tidy imports
* add copyright headers
* Prefix sidecar proxy test files with source and destination.
* Update controller_test.go
* NET-5132 - Configure multiport routing for connect proxies in TProxy mode
* formatting golden files
* reverting golden files and adding changes in manually. build implicit destinations still has some issues.
* fixing files that were incorrectly repeating the outbound listener
* PR comments
* extract AlpnProtocol naming convention to getAlpnProtocolFromPortName(portName)
* removing address level filtering.
* adding license to resources_test.go
---------
Co-authored-by: Iryna Shustava <iryna@hashicorp.com>
Co-authored-by: R.B. Boyer <rb@hashicorp.com>
Co-authored-by: github-team-consul-core <github-team-consul-core@hashicorp.com>
This commit adds support for transparent proxy to the sidecar proxy controller. As we do not yet support inferring destinations from intentions, this assumes that all services in the cluster are destinations.
* Add response header filters to http-route config entry definitions
* Map response header filters from config entry when constructing route destination
* Support response header modifiers at the service level as well
* Update protobuf definitions
* Update existing unit tests
* Add response filters to route consolidation logic
* Make existing unit tests more robust
* Add missing docstring
* Add changelog entry
* Add response filter modifiers to existing integration test
* Add more robust testing for response header modifiers in the discovery chain
* Add more robust testing for request header modifiers in the discovery chain
* Modify test to verify that service filter modifiers take precedence over rule filter modifiers
* [NET-5325] ACL templated policies support in tokens and roles
- Add API support for creating tokens/roles with templated-policies
- Add CLI support for creating tokens/roles with templated-policies
* adding changelog
* Fixes issues in setting status
* Update golden files for changes to xds generation to not use deprecated
methods
* Fixed default for validation of JWT for route
* This controller generates and saves ProxyStateTemplate for sidecar proxies.
* It currently supports single-port L4 ports only.
* It keeps a cache of all destinations to make it easier to compute and retrieve destinations.
* It will update the status of the pbmesh.Upstreams resource if anything is invalid.
* This commit also changes service endpoints to include workload identity. This made the implementation a bit easier as we don't need to look up as many workloads and instead rely on endpoints data.
This PR enables the GetEnvoyBootstrapParams endpoint to construct envoy bootstrap parameters from v2 catalog and mesh resources.
* Make bootstrap request and response parameters less specific to services so that we can re-use them for workloads or service instances.
* Remove ServiceKind from bootstrap params response. This value was unused previously and is not needed for V2.
* Make access logs generation generic so that we can generate them using v1 or v2 resources.
Add support for querying tokens by service name
The consul-k8s endpoints controller has a workflow where it fetches all tokens.
This is not performant for large clusters, where there may be a sizable number
of tokens. This commit attempts to alleviate that problem and introduces a new
way to query by the token's service name.
Fix issue where agentless endpoints would fail to populate after snapshot restore.
Fixes an issue that was introduced in #17775. This issue happens because
a long-lived pointer to the state store is held, which is unsafe to do.
Snapshot restorations will swap out this state store, meaning that the
proxycfg watches would break for agentless.
* Add the plumbing for APIGW JWT work
* Remove unneeded import
* Add deep equal function for HTTPMatch
* Added plumbing for status conditions
* Remove unneeded comment
* Fix comments
* Add calls in xds listener for apigateway to setup listener jwt auth
* Add Enabler interface to turn sink on/off
* Use h for hcpProviderImpl vars, fix PR feeback and fix errors
* Keep nil check in exporter and fix tests
* Clarify comment and fix function name
* Use disable instead of enable
* Fix errors nit in otlp_transform
* Add test for refreshInterval of updateConfig
* Add disabled field in MetricsConfig struct
* Fix PR feedback: improve comment and remove double colons
* Fix deps test which requires a maybe
* Update hcp-sdk-go to v0.61.0
* use disabled flag in telemetry_config.go
* Handle 4XX errors in telemetry_provider
* Fix deps test
* Check 4XX instead
* Run make go-mod-tidy
* Adding explicit MPL license for sub-package
This directory and its subdirectories (packages) contain files licensed with the MPLv2 `LICENSE` file in this directory and are intentionally licensed separately from the BSL `LICENSE` file at the root of this repository.
* Adding explicit MPL license for sub-package
This directory and its subdirectories (packages) contain files licensed with the MPLv2 `LICENSE` file in this directory and are intentionally licensed separately from the BSL `LICENSE` file at the root of this repository.
* Updating the license from MPL to Business Source License
Going forward, this project will be licensed under the Business Source License v1.1. Please see our blog post for more details at <Blog URL>, FAQ at www.hashicorp.com/licensing-faq, and details of the license at www.hashicorp.com/bsl.
* add missing license headers
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
---------
Co-authored-by: hashicorp-copywrite[bot] <110428419+hashicorp-copywrite[bot]@users.noreply.github.com>
* Added oss config entries for Policy and JWT on APIGW
* Updated structs for config entry
* Updated comments, ran deep-copy
* Move JWT configuration into OSS file
* Add in the config entry OSS file for jwts
* Added changelog
* fixing proto spacing
* Moved to using manually written deep copy method
* Use pointers for override/default fields in apigw config entries
* Run gen scripts for changed types
* Add logging to locality policy application
In OSS, this is currently a no-op.
* Inherit locality when registering sidecars
When sidecar locality is not explicitly configured, inherit locality
from the proxied service.
* bump testcontainers-go from 0.22.0 and remove pinned go version in integ test
* go mod tidy
* Replace deprecated target.Authority with target.URL.Host
* OTElExporter now uses an EndpointProvider to discover the endpoint
* OTELSink uses a ConfigProvider to obtain filters and labels configuration
* improve tests for otel_sink
* Regex logic is moved into client for a method on the TelemetryConfig object
* Create a telemetry_config_provider and update deps to use it
* Fix conversion
* fix import newline
* Add logger to hcp client and move telemetry_config out of the client.go file
* Add a telemetry_config.go to refactor client.go
* Update deps
* update hcp deps test
* Modify telemetry_config_providers
* Check for nil filters
* PR review updates
* Fix comments and move around pieces
* Fix comments
* Remove context from client struct
* Moved ctx out of sink struct and fixed filters, added a test
* Remove named imports, use errors.New if not fformatting
* Remove HCP dependencies in telemetry package
* Add success metric and move lock only to grab the t.cfgHahs
* Update hash
* fix nits
* Create an equals method and add tests
* Improve telemetry_config_provider.go tests
* Add race test
* Add missing godoc
* Remove mock for MetricsClient
* Avoid goroutine test panics
* trying to kick CI lint issues by upgrading mod
* imprve test code and add hasher for testing
* Use structure logging for filters, fix error constants, and default to allow all regex
* removed hashin and modify logic to simplify
* Improve race test and fix PR feedback by removing hash equals and avoid testing the timer.Ticker logic, and instead unit test
* Ran make go-mod-tidy
* Use errtypes in the test
* Add changelog
* add safety check for exporter endpoint
* remove require.Contains by using error types, fix structure logging, and fix success metric typo in exporter
* Fixed race test to have changing config values
* Send success metric before modifying config
* Avoid the defer and move the success metric under
* [CC-5719] Add support for builtin global-read-only policy
* Add changelog
* Add read-only to docs
* Fix some minor issues.
* Change from ReplaceAll to Sprintf
* Change IsValidPolicy name to return an error instead of bool
* Fix PolicyList test
* Fix other tests
* Apply suggestions from code review
Co-authored-by: Paul Glass <pglass@hashicorp.com>
* Fix state store test for policy list.
* Fix naming issues
* Update acl/validation.go
Co-authored-by: Chris Thain <32781396+cthain@users.noreply.github.com>
* Update agent/consul/acl_endpoint.go
---------
Co-authored-by: Paul Glass <pglass@hashicorp.com>
Co-authored-by: Chris Thain <32781396+cthain@users.noreply.github.com>
Prevent partial application of Envoy extensions
Ensure that non-required extensions do not change xDS resources before
exiting on failure by cloning proto messages prior to applying each
extension.
To support this change, also move `CanApply` checks up a layer and make
them prior to attempting extension application, s.t. we avoid
unnecessary copies where extensions can't be applied.
Last, ensure that we do not allow panics from `CanApply` or `Extend`
checks to escape the attempted extension application.
* Fix topoloy intention with mixed connect-native/normal services.
If a service is registered twice, once with connect-native and once
without, the topology views would prune the existing intentions. This
change brings the code more in line with the transparent proxy behavior.
* Dedupe nodes in the ServiceTopology ui endpoint (like done with tags).
* Consider a service connect-native as soon as one instance is.
* api-gateway: subscribe to bound-api-gateway only after receiving api-gateway
This fixes a race condition due to our dependency on having the listener(s) from the api-gateway config entry in order to fully and properly process the resources on the bound-api-gateway config entry.
* Apply suggestions from code review
* Add changelog entry
Nitya Dhanushkodi