44 Commits (972998203ea7056d93de38a27525ba57eaae46c7)

Author	SHA1	Message	Date
Derek Menteer	87324c9ec8	Add PrioritizeByLocality to config entries. (#17007) ... This commit adds the PrioritizeByLocality field to both proxy-config and service-resolver config entries for locality-aware routing. The field is currently intended for enterprise only, and will be used to enable prioritization of service-mesh connections to services based on geographical region / zone.	2 years ago
Eric Haberkorn	a6d69adcf5	Add default resolvers to disco chains based on the default sameness group (#16837)	2 years ago
Eric Haberkorn	0d1d2fc4c9	add order by locality failover to Consul enterprise (#16791)	2 years ago
Ronald	94ec4eb2f4	copyright headers for agent folder (#16704) ... * copyright headers for agent folder * Ignore test data files * fix proto files and remove headers in agent/uiserver folder * ignore deep-copy files	2 years ago
Derek Menteer	2236975011	Change partition for peers in discovery chain targets (#16769) ... This commit swaps the partition field to the local partition for discovery chains targeting peers. Prior to this change, peer upstreams would always use a value of default regardless of which partition they exist in. This caused several issues in xds / proxycfg because of id mismatches. Some prior fixes were made to deal with one-off id mismatches that this PR also cleans up, since they are no longer needed.	2 years ago
Eric Haberkorn	495ad4c7ef	add enterprise xds tests (#16738)	2 years ago
Eric Haberkorn	7477f52a16	add sameness groups to discovery chains (#16671)	2 years ago
Eric Haberkorn	e298f506a5	Add Peer Locality to Discovery Chains (#16588) ... Add peer locality to discovery chains	2 years ago
Eric Haberkorn	5f81662066	Add support for failover policies (#16505)	2 years ago
Andrew Stucki	4b661d1e0c	Add ServiceResolver RequestTimeout for route timeouts to make TerminatingGateway upstream timeouts configurable (#16495) ... * Leverage ServiceResolver ConnectTimeout for route timeouts to make TerminatingGateway upstream timeouts configurable * Regenerate golden files * Add RequestTimeout field * Add changelog entry	2 years ago
Nitya Dhanushkodi	d382ca0aec	extensions: refactor serverless plugin to use extensions from config entry fields (#15817) ... docs: update config entry docs and the Lambda manual registration docs Co-authored-by: Nitya Dhanushkodi <nitya@hashicorp.com> Co-authored-by: Eric <eric@haberkorn.co>	2 years ago
Derek Menteer	e87d35e313	Fix DialedDirectly configuration for Consul dataplane. (#15760) ... Fix DialedDirectly configuration for Consul dataplane.	2 years ago
Eric Haberkorn	58901ad7df	Cluster peering failover disco chain changes (#14296)	2 years ago
Eric Haberkorn	ebd5513d4b	Refactor failover code to use Envoy's aggregate clusters (#14178)	2 years ago
R.B. Boyer	0fa828db76	peering: replicate all SpiffeID values necessary for the importing side to do SAN validation (#13612) ... When traversing an exported peered service, the discovery chain evaluation at the other side may re-route the request to a variety of endpoints. Furthermore we intend to terminate mTLS at the mesh gateway for arriving peered traffic that is http-like (L7), so the caller needs to know the mesh gateway's SpiffeID in that case as well. The following new SpiffeID values will be shipped back in the peerstream replication: - tcp: all possible SpiffeIDs resulting from the service-resolver component of the exported discovery chain - http-like: the SpiffeID of the mesh gateway	2 years ago
R.B. Boyer	25ba9c147a	xds: ensure that all connect timeout configs can apply equally to tproxy direct dial connections (#12711) ... Just like standard upstreams the order of applicability in descending precedence: 1. caller's `service-defaults` upstream override for destination 2. caller's `service-defaults` upstream defaults 3. destination's `service-resolver` ConnectTimeout 4. system default of 5s Co-authored-by: mrspanishviking <kcardenas@hashicorp.com>	3 years ago
Mark Anderson	98a2e282be	Fixup acl.EnterpriseMeta ... Signed-off-by: Mark Anderson <manderson@hashicorp.com>	3 years ago
Mark Anderson	05eded4f1d	Manual Structs fixup ... Change things by hand that I couldn't figure out how to automate Signed-off-by: Mark Anderson <manderson@hashicorp.com>	3 years ago
R.B. Boyer	ac5bea862a	server: ensure that service-defaults meta is incorporated into the discovery chain response (#12511) ... Also add a new "Default" field to the discovery chain response to clients	3 years ago
Paul Banks	e22cc9c53a	Header manip for split legs plumbing	3 years ago
Dhia Ayachi	bc0e4f2f46	partition dicovery chains (#10983) ... * partition dicovery chains * fix default partition for OSS	3 years ago
Dhia Ayachi	09197c989c	add partition to SNI when partition is non default (#10917)	3 years ago
R.B. Boyer	188e8dc51f	agent/structs: add a bunch more EnterpriseMeta helper functions to help with partitioning (#10669)	3 years ago
Freddy	429f9d8bb8	Add flag for transparent proxies to dial individual instances (#10329)	4 years ago
Freddy	ed1082510d	Fixup discovery chain handling in transparent mode (#10168) ... Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Previously we would associate the address of a discovery chain target with the discovery chain's filter chain. This was broken for a few reasons: - If the upstream is a virtual service, the client proxy has no way of dialing it because virtual services are not targets of their discovery chains. The targets are distinct services. This is addressed by watching the endpoints of all upstream services, not just their discovery chain targets. - If multiple discovery chains resolve to the same target, that would lead to multiple filter chains attempting to match on the target's virtual IP. This is addressed by only matching on the upstream's virtual IP. NOTE: this implementation requires an intention to the redirecting virtual service and not just to the final destination. This is how we can know that the virtual service is an upstream to watch. A later PR will look into traversing discovery chains when computing upstreams so that intentions are only required to the discovery chain targets.	4 years ago
freddygv	cd4cf5161f	Update resolver defaulting	4 years ago
freddygv	eaa250cc80	Ensure resolver node with LB isn't considered default	4 years ago
freddygv	63f79e5f9b	Restructure structs and other PR comments	4 years ago
freddygv	81115b6eaa	Compile down LB policy to disco chain nodes	4 years ago
Matt Keeler	9e5fd7f925	OSS Changes for various config entry namespacing bugs (#7226)	5 years ago
Matt Keeler	c09693e545	Updates to Config Entries and Connect for Namespaces (#7116)	5 years ago
Matt Keeler	a704ebe639	Add Namespace support to the API module and the CLI commands (#6874) ... Also update the Docs and fixup the HTTP API to return proper errors when someone attempts to use Namespaces with an OSS agent. Add Namespace HTTP API docs Make all API endpoints disallow unknown fields	5 years ago
R.B. Boyer	fd1c62ee8b	connect: ensure time.Duration fields retain their human readable forms in the API (#6348) ... This applies for both config entries and the compiled discovery chain. Also omit some other config entries fields when empty.	5 years ago
R.B. Boyer	561b2fe606	connect: generate the full SNI names for discovery targets in the compiler rather than in the xds package (#6340)	5 years ago
R.B. Boyer	ae79cdab1b	connect: introduce ExternalSNI field on service-defaults (#6324) ... Compiling this will set an optional SNI field on each DiscoveryTarget. When set this value should be used for TLS connections to the instances of the target. If not set the default should be used. Setting ExternalSNI will disable mesh gateway use for that target. It also disables several service-resolver features that do not make sense for an external service.	5 years ago
R.B. Boyer	8e22d80e35	connect: fix failover through a mesh gateway to a remote datacenter (#6259) ... Failover is pushed entirely down to the data plane by creating envoy clusters and putting each successive destination in a different load assignment priority band. For example this shows that normally requests go to 1.2.3.4:8080 but when that fails they go to 6.7.8.9:8080: - name: foo load_assignment: cluster_name: foo policy: overprovisioning_factor: 100000 endpoints: - priority: 0 lb_endpoints: - endpoint: address: socket_address: address: 1.2.3.4 port_value: 8080 - priority: 1 lb_endpoints: - endpoint: address: socket_address: address: 6.7.8.9 port_value: 8080 Mesh gateways route requests based solely on the SNI header tacked onto the TLS layer. Envoy currently only lets you configure the outbound SNI header at the cluster layer. If you try to failover through a mesh gateway you ideally would configure the SNI value per endpoint, but that's not possible in envoy today. This PR introduces a simpler way around the problem for now: 1. We identify any target of failover that will use mesh gateway mode local or remote and then further isolate any resolver node in the compiled discovery chain that has a failover destination set to one of those targets. 2. For each of these resolvers we will perform a small measurement of comparative healths of the endpoints that come back from the health API for the set of primary target and serial failover targets. We walk the list of targets in order and if any endpoint is healthy we return that target, otherwise we move on to the next target. 3. The CDS and EDS endpoints both perform the measurements in (2) for the affected resolver nodes. 4. For CDS this measurement selects which TLS SNI field to use for the cluster (note the cluster is always going to be named for the primary target) 5. For EDS this measurement selects which set of endpoints will populate the cluster. Priority tiered failover is ignored. One of the big downsides to this approach to failover is that the failover detection and correction is going to be controlled by consul rather than deferring that entirely to the data plane as with the prior version. This also means that we are bound to only failover using official health signals and cannot make use of data plane signals like outlier detection to affect failover. In this specific scenario the lack of data plane signals is ok because the effectiveness is already muted by the fact that the ultimate destination endpoints will have their data plane signals scrambled when they pass through the mesh gateway wrapper anyway so we're not losing much. Another related fix is that we now use the endpoint health from the underlying service, not the health of the gateway (regardless of failover mode).	5 years ago
R.B. Boyer	c395affc93	connect: expose an API endpoint to compile the discovery chain (#6248) ... In addition to exposing compilation over the API cleaned up the structures that would be exchanged to be cleaner and easier to support and understand. Also removed ability to configure the envoy OverprovisioningFactor.	5 years ago
R.B. Boyer	dcb609af83	connect: detect and prevent circular discovery chain references (#6246)	5 years ago
R.B. Boyer	f02924fafe	connect: simplify the compiled discovery chain data structures (#6242) ... This should make them better for sending over RPC or the API. Instead of a chain implemented explicitly like a linked list (nodes holding pointers to other nodes) instead switch to a flat map of named nodes with nodes linking other other nodes by name. The shipped structure is just a map and a string to indicate which key to start from. Other changes: * inline the compiler option InferDefaults as true * introduce compiled target config to avoid needing to send back additional maps of Resolvers; future target-specific compiled state can go here * move compiled MeshGateway out of the Resolver and into the TargetConfig where it makes more sense.	5 years ago
R.B. Boyer	6393edba53	connect: reconcile how upstream configuration works with discovery chains (#6225) ... * connect: reconcile how upstream configuration works with discovery chains The following upstream config fields for connect sidecars sanely integrate into discovery chain resolution: - Destination Namespace/Datacenter: Compilation occurs locally but using different default values for namespaces and datacenters. The xDS clusters that are created are named as they normally would be. - Mesh Gateway Mode (single upstream): If set this value overrides any value computed for any resolver for the entire discovery chain. The xDS clusters that are created may be named differently (see below). - Mesh Gateway Mode (whole sidecar): If set this value overrides any value computed for any resolver for the entire discovery chain. If this is specifically overridden for a single upstream this value is ignored in that case. The xDS clusters that are created may be named differently (see below). - Protocol (in opaque config): If set this value overrides the value computed when evaluating the entire discovery chain. If the normal chain would be TCP or if this override is set to TCP then the result is that we explicitly disable L7 Routing and Splitting. The xDS clusters that are created may be named differently (see below). - Connect Timeout (in opaque config): If set this value overrides the value for any resolver in the entire discovery chain. The xDS clusters that are created may be named differently (see below). If any of the above overrides affect the actual result of compiling the discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op override to "tcp") then the relevant parameters are hashed and provided to the xDS layer as a prefix for use in naming the Clusters. This is to ensure that if one Upstream discovery chain has no overrides and tangentially needs a cluster named "api.default.XXX", and another Upstream does have overrides for "api.default.XXX" that they won't cross-pollinate against the operator's wishes. Fixes #6159	5 years ago
R.B. Boyer	e039dfd7f8	connect: rework how the service resolver subset OnlyPassing flag works (#6173) ... The main change is that we no longer filter service instances by health, preferring instead to render all results down into EDS endpoints in envoy and merely label the endpoints as HEALTHY or UNHEALTHY. When OnlyPassing is set to true we will force consul checks in a 'warning' state to render as UNHEALTHY in envoy. Fixes #6171	5 years ago
R.B. Boyer	9138a97054	Fix bug in service-resolver redirects if the destination uses a default resolver. (#6122) ... Also: - add back an internal http endpoint to dump a compiled discovery chain for debugging purposes Before the CompiledDiscoveryChain.IsDefault() method would test: - is this chain just one resolver step? - is that resolver step just the default? But what I forgot to test: - is that resolver step for the same service that the chain represents? This last point is important because if you configured just one config entry: kind = "service-resolver" name = "web" redirect { service = "other" } and requested the chain for "web" you'd get back a **default** resolver for "other". In the xDS code the IsDefault() method is used to determine if this chain is "empty". If it is then we use the pre-discovery-chain logic that just uses data embedded in the Upstream object (and still lets the escape hatches function). In the example above that means certain parts of the xDS code were going to try referencing a cluster named "web..." despite the other parts of the xDS code maintaining clusters named "other...".	5 years ago
R.B. Boyer	4bdb690a25	activate most discovery chain features in xDS for envoy (#6024)	5 years ago
R.B. Boyer	6a52f9f9fb	initial version of L7 config entry compiler (#5994) ... With this you should be able to fetch all of the relevant discovery chain config entries from the state store in one query and then feed them into the compiler outside of a transaction. There are a lot of TODOs scattered through here, but they're mostly around handling fun edge cases and can be deferred until more of the plumbing works completely.	5 years ago