Commit Graph

94 Commits (97173725b74be3cbb38c1c963c02e61f1d19842d)

Author SHA1 Message Date
freddygv 12923f5ebc PR comments 2021-10-27 11:15:25 -06:00
freddygv a33b6923e0 Account for partitions in xds gen for mesh gw
This commit avoids skipping gateways in remote partitions of the local
DC when generating listeners/clusters/endpoints.
2021-10-27 11:15:25 -06:00
freddygv 110fae820a Update xds pkg to account for GatewayKey 2021-10-27 09:03:56 -06:00
freddygv 7e65678c52 Update mesh gateway proxy watches for partitions
This commit updates mesh gateway watches for cross-partitions
communication.

* Mesh gateways are keyed by partition and datacenter.

* Mesh gateways will now watch gateways in partitions that export
services to their partition.

* Mesh gateways in non-default partitions will not have cross-datacenter
watches. They are not involved in traditional WAN federation.
2021-10-27 09:03:56 -06:00
freddygv 37a16e9487 Replace Split with SplitN 2021-10-26 23:36:01 -06:00
freddygv 62e0fc62c1 Configure sidecars to watch gateways in partitions
Previously the datacenter of the gateway was the key identifier, now it
is the datacenter and partition.

When dialing services in other partitions or datacenters we now watch
the appropriate partition.
2021-10-26 23:35:37 -06:00
Paul Banks 136928a90f Minor PR typo and cleanup fixes 2021-09-23 10:13:19 +01:00
Paul Banks ccbda0c285 Update proxycfg to hold more ingress config state 2021-09-23 10:08:02 +01:00
Paul Banks 4e39f03d5b Add ingress-gateway config for SDS 2021-09-23 10:08:02 +01:00
Paul Banks f439dfc04f Ingress gateway header manip plumbing 2021-09-10 21:09:24 +01:00
freddygv 47da00d3c7 Validate SANs for passthrough clusters and failovers 2021-07-14 22:21:55 -06:00
Freddy 429f9d8bb8
Add flag for transparent proxies to dial individual instances (#10329) 2021-06-09 14:34:17 -06:00
Freddy 078c40425f
Rename "cluster" config entry to "mesh" (#10127)
This config entry is being renamed primarily because in k8s the name
cluster could be confusing given that the config entry applies across
federated datacenters.

Additionally, this config entry will only apply to Consul as a service
mesh, so the more generic "cluster" name is not needed.
2021-04-28 16:13:29 -06:00
freddygv 7bd51ff536 Replace TransparentProxy bool with ProxyMode
This PR replaces the original boolean used to configure transparent
proxy mode. It was replaced with a string mode that can be set to:

- "": Empty string is the default for when the setting should be
defaulted from other configuration like config entries.
- "direct": Direct mode is how applications originally opted into the
mesh. Proxy listeners need to be dialed directly.
- "transparent": Transparent mode enables configuring Envoy as a
transparent proxy. Traffic must be captured and redirected to the
inbound and outbound listeners.

This PR also adds a struct for transparent proxy specific configuration.
Initially this is not stored as a pointer. Will revisit that decision
before GA.
2021-04-12 09:35:14 -06:00
R.B. Boyer 499fee73b3
connect: add toggle to globally disable wildcard outbound network access when transparent proxy is enabled (#9973)
This adds a new config entry kind "cluster" with a single special name "cluster" where this can be controlled.
2021-04-06 13:19:59 -05:00
freddygv a54d6a9010 Update proxycfg for transparent proxy 2021-03-17 13:40:39 -06:00
R.B. Boyer 43193a35c6
xds: prevent LDS flaps in mesh gateways due to unstable datacenter lists (#9651)
Also fix a similar issue in Terminating Gateways that was masked by an overzealous test.
2021-02-08 10:19:57 -06:00
R.B. Boyer 74d5df7c7a
xds: use envoy's rbac filter to handle intentions entirely within envoy (#8569) 2020-08-27 12:20:58 -05:00
Daniel Nephin 068b43df90 Enable gofmt simplify
Code changes done automatically with 'gofmt -s -w'
2020-06-16 13:21:11 -04:00
freddygv 19e3954603 Move compound service names to use ServiceName type 2020-06-12 13:47:43 -06:00
Freddy 9ed325ba8b
Enable gateways to resolve hostnames to IPv4 addresses (#7999)
The DNS resolution will be handled by Envoy and defaults to LOGICAL_DNS. This discovery type can be overridden on a per-gateway basis with the envoy_dns_discovery_type Gateway Option.

If a service contains an instance with a hostname as an address we set the Envoy cluster to use DNS as the discovery type rather than EDS. Since both mesh gateways and terminating gateways route to clusters using SNI, whenever there is a mix of hostnames and IP addresses associated with a service we use the hostname + CDS rather than the IPs + EDS.

Note that we detect hostnames by attempting to parse the service instance's address as an IP. If it is not a valid IP we assume it is a hostname.
2020-06-03 15:28:45 -06:00
Chris Piraino 0bd5618cb2 Cleanup proxycfg for TLS
- Use correct enterprise metadata for finding config entry
- nil out cancel functions on config snapshot copy
- Look at HostsSet when checking validity
2020-05-07 10:22:57 -05:00
Kyle Havlovitz f14c54e25e Add TLS option and DNS SAN support to ingress config
xds: Only set TLS context for ingress listener when requested
2020-05-06 15:12:02 -05:00
Chris Piraino 881760f701 xds: Use only the port number as the configured route name
This removes duplication of protocol from the stats_prefix
2020-05-06 15:06:13 -05:00
Kyle Havlovitz 247f9eaf13 Allow ingress gateways to route traffic based on Host header
This commit adds the necessary changes to allow an ingress gateway to
route traffic from a single defined port to multiple different upstream
services in the Consul mesh.

To do this, we now require all HTTP requests coming into the ingress
gateway to specify a Host header that matches "<service-name>.*" in
order to correctly route traffic to the correct service.

- Differentiate multiple listener's route names by port
- Adds a case in xds for allowing default discovery chains to create a
  route configuration when on an ingress gateway. This allows default
  services to easily use host header routing
- ingress-gateways have a single route config for each listener
  that utilizes domain matching to route to different services.
2020-05-06 15:06:13 -05:00
Freddy 137a2c32c6
TLS Origination for Terminating Gateways (#7671) 2020-04-27 16:25:37 -06:00
freddygv 034d7d83d4 Fix snapshot IsEmpty 2020-04-27 11:08:41 -06:00
freddygv c0e1751878 Allow terminating-gateway to setup listener before servicegroups are known 2020-04-27 11:08:40 -06:00
freddygv 913b13f31f Add subset support 2020-04-27 11:08:40 -06:00
freddygv 24207226ca Add proxycfg state management for terminating-gateways 2020-04-27 11:07:06 -06:00
Kyle Havlovitz e9e8c0e730
Ingress Gateways for TCP services (#7509)
* Implements a simple, tcp ingress gateway workflow

This adds a new type of gateway for allowing Ingress traffic into Connect from external services.

Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>
2020-04-16 14:00:48 -07:00
R.B. Boyer 6adad71125
wan federation via mesh gateways (#6884)
This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch:

There are several distinct chunks of code that are affected:

* new flags and config options for the server

* retry join WAN is slightly different

* retry join code is shared to discover primary mesh gateways from secondary datacenters

* because retry join logic runs in the *agent* and the results of that
  operation for primary mesh gateways are needed in the *server* there are
  some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur
  at multiple layers of abstraction just to pass the data down to the right
  layer.

* new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers

* the function signature for RPC dialing picked up a new required field (the
  node name of the destination)

* several new RPCs for manipulating a FederationState object:
  `FederationState:{Apply,Get,List,ListMeshGateways}`

* 3 read-only internal APIs for debugging use to invoke those RPCs from curl

* raft and fsm changes to persist these FederationStates

* replication for FederationStates as they are canonically stored in the
  Primary and replicated to the Secondaries.

* a special derivative of anti-entropy that runs in secondaries to snapshot
  their local mesh gateway `CheckServiceNodes` and sync them into their upstream
  FederationState in the primary (this works in conjunction with the
  replication to distribute addresses for all mesh gateways in all DCs to all
  other DCs)

* a "gateway locator" convenience object to make use of this data to choose
  the addresses of gateways to use for any given RPC or gossip operation to a
  remote DC. This gets data from the "retry join" logic in the agent and also
  directly calls into the FSM.

* RPC (`:8300`) on the server sniffs the first byte of a new connection to
  determine if it's actually doing native TLS. If so it checks the ALPN header
  for protocol determination (just like how the existing system uses the
  type-byte marker).

* 2 new kinds of protocols are exclusively decoded via this native TLS
  mechanism: one for ferrying "packet" operations (udp-like) from the gossip
  layer and one for "stream" operations (tcp-like). The packet operations
  re-use sockets (using length-prefixing) to cut down on TLS re-negotiation
  overhead.

* the server instances specially wrap the `memberlist.NetTransport` when running
  with gateway federation enabled (in a `wanfed.Transport`). The general gist is
  that if it tries to dial a node in the SAME datacenter (deduced by looking
  at the suffix of the node name) there is no change. If dialing a DIFFERENT
  datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh
  gateways to eventually end up in a server's :8300 port.

* a new flag when launching a mesh gateway via `consul connect envoy` to
  indicate that the servers are to be exposed. This sets a special service
  meta when registering the gateway into the catalog.

* `proxycfg/xds` notice this metadata blob to activate additional watches for
  the FederationState objects as well as the location of all of the consul
  servers in that datacenter.

* `xds:` if the extra metadata is in place additional clusters are defined in a
  DC to bulk sink all traffic to another DC's gateways. For the current
  datacenter we listen on a wildcard name (`server.<dc>.consul`) that load
  balances all servers as well as one mini-cluster per node
  (`<node>.server.<dc>.consul`)

* the `consul tls cert create` command got a new flag (`-node`) to help create
  an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 15:59:02 -05:00
Matt Keeler 4c9577678e
xDS Mesh Gateway Resolver Subset Fixes (#7294)
* xDS Mesh Gateway Resolver Subset Fixes

The first fix was that clusters were being generated for every service resolver subset regardless of there being any service instances of the associated service in that dc. The previous logic didn’t care at all but now it will omit generating those clusters unless we also have service instances that should be proxied.

The second fix was to respect the DefaultSubset of a service resolver so that mesh-gateways would configure the endpoints of the unnamed subset cluster to only those endpoints matched by the default subsets filters.

* Refactor the gateway endpoint generation to be a little easier to read
2020-02-19 11:57:55 -05:00
Matt Keeler c09693e545
Updates to Config Entries and Connect for Namespaces (#7116) 2020-01-24 10:04:58 -05:00
R.B. Boyer 2011f3d7dc
xds: mesh gateway CDS requests are now allowed to receive an empty CDS reply (#6787)
This is the rest of the fix for #6543 that was incompletely fixed in #6576.
2019-11-26 15:55:13 -06:00
R.B. Boyer 97aa050c20
agent: allow mesh gateways to initialize even if there are no connect services registered yet (#6576)
Fixes #6543

Also improved some of the proxycfg tests to cover snapshot validity
better.
2019-10-17 16:46:49 -05:00
Freddy fdd10dd8b8
Expose HTTP-based paths through Connect proxy (#6446)
Fixes: #5396

This PR adds a proxy configuration stanza called expose. These flags register
listeners in Connect sidecar proxies to allow requests to specific HTTP paths from outside of the node. This allows services to protect themselves by only
listening on the loopback interface, while still accepting traffic from non
Connect-enabled services.

Under expose there is a boolean checks flag that would automatically expose all
registered HTTP and gRPC check paths.

This stanza also accepts a paths list to expose individual paths. The primary
use case for this functionality would be to expose paths for third parties like
Prometheus or the kubelet.

Listeners for requests to exposed paths are be configured dynamically at run
time. Any time a proxy, or check can be registered, a listener can also be
created.

In this initial implementation requests to these paths are not
authenticated/encrypted.
2019-09-25 20:55:52 -06:00
R.B. Boyer 8e22d80e35
connect: fix failover through a mesh gateway to a remote datacenter (#6259)
Failover is pushed entirely down to the data plane by creating envoy
clusters and putting each successive destination in a different load
assignment priority band. For example this shows that normally requests
go to 1.2.3.4:8080 but when that fails they go to 6.7.8.9:8080:

- name: foo
  load_assignment:
    cluster_name: foo
    policy:
      overprovisioning_factor: 100000
    endpoints:
    - priority: 0
      lb_endpoints:
      - endpoint:
          address:
            socket_address:
              address: 1.2.3.4
              port_value: 8080
    - priority: 1
      lb_endpoints:
      - endpoint:
          address:
            socket_address:
              address: 6.7.8.9
              port_value: 8080

Mesh gateways route requests based solely on the SNI header tacked onto
the TLS layer. Envoy currently only lets you configure the outbound SNI
header at the cluster layer.

If you try to failover through a mesh gateway you ideally would
configure the SNI value per endpoint, but that's not possible in envoy
today.

This PR introduces a simpler way around the problem for now:

1. We identify any target of failover that will use mesh gateway mode local or
   remote and then further isolate any resolver node in the compiled discovery
   chain that has a failover destination set to one of those targets.

2. For each of these resolvers we will perform a small measurement of
   comparative healths of the endpoints that come back from the health API for the
   set of primary target and serial failover targets. We walk the list of targets
   in order and if any endpoint is healthy we return that target, otherwise we
   move on to the next target.

3. The CDS and EDS endpoints both perform the measurements in (2) for the
   affected resolver nodes.

4. For CDS this measurement selects which TLS SNI field to use for the cluster
   (note the cluster is always going to be named for the primary target)

5. For EDS this measurement selects which set of endpoints will populate the
   cluster. Priority tiered failover is ignored.

One of the big downsides to this approach to failover is that the failover
detection and correction is going to be controlled by consul rather than
deferring that entirely to the data plane as with the prior version. This also
means that we are bound to only failover using official health signals and
cannot make use of data plane signals like outlier detection to affect
failover.

In this specific scenario the lack of data plane signals is ok because the
effectiveness is already muted by the fact that the ultimate destination
endpoints will have their data plane signals scrambled when they pass through
the mesh gateway wrapper anyway so we're not losing much.

Another related fix is that we now use the endpoint health from the
underlying service, not the health of the gateway (regardless of
failover mode).
2019-08-05 13:30:35 -05:00
R.B. Boyer c395affc93
connect: expose an API endpoint to compile the discovery chain (#6248)
In addition to exposing compilation over the API cleaned up the structures that would be exchanged to be cleaner and easier to support and understand.

Also removed ability to configure the envoy OverprovisioningFactor.
2019-08-02 15:34:54 -05:00
Matt Keeler a7421c160f Implement mesh gateway management of service subsets
Fixup some error handling
2019-07-02 10:29:37 -04:00
R.B. Boyer 4bdb690a25
activate most discovery chain features in xDS for envoy (#6024) 2019-07-01 22:10:51 -05:00
Matt Keeler 8d953f5840 Implement Mesh Gateways
This includes both ingress and egress functionality.
2019-07-01 16:28:30 -04:00
Matt Keeler 813e009a2d
Prepare for having different service kinds that are all generic… (#6013)
Default to internal error when service kind is unknown
2019-06-24 15:05:36 -04:00
Paul Banks 0f27ffd163 Proxy Config Manager (#4729)
* Proxy Config Manager

This component watches for local state changes on the agent and ensures that each service registered locally with Kind == connect-proxy has it's state being actively populated in the cache.

This serves two purposes:
 1. For the built-in proxy, it ensures that the state needed to accept connections is available in RAM shortly after registration and likely before the proxy actually starts accepting traffic.
 2. For (future - next PR) xDS server and other possible future proxies that require _push_ based config discovery, this provides a mechanism to subscribe and be notified about updates to a proxy instance's config including upstream service discovery results.

* Address review comments

* Better comments; Better delivery of latest snapshot for slow watchers; Embed Config

* Comment typos

* Add upstream Stringer for funsies
2018-10-10 16:55:34 +01:00