30 Commits (8f61558e195ef367a25224c6e6fc08af909cdaee)

Author	SHA1	Message	Date
John Cowen	ebc574c509	ui: oss don't ever POST/PUT Namespaces when writing data (#7238) ... * ui: Ensure we use nonEmptySet everywhere where we add Namespace We missed a coupld of places where we use the noEmptySet function, which will only perform the set if the specified property is non-empty. Currently we aren't certain there is a place in OSS where a Namespace can make its way down via the API and endup being PUT/POSTed back out again when saved. If this did ever happen we would assume it would be the default namespace, but we add an extra check here to ensure we never PUT/POST the Namespace property if Namespaces are disabled. * ui: Add step/assertion for assert if a property is NOT set in the body * ui: Improve updated/create acc testing for policy/token/roles: Including making sure a Namespace property is never sent through if you are running without namespace support	5 years ago
John Cowen	eb35d89893	ui: Run 2 separate test runs oss and ent (#7214) ... * ui: Make API integration tests aware of CONSUL_NSPACES_ENABLED * ui: Allow passing CONSUL_NSPACES_ENABLED in via the cli in ember * ui: Add more makefile targets/package scripts to switch NSPACEs on/off * ui: Ensure all acceptance tests continue to pass with NSPACEs on/off This required a little tweaking of the dictionary, at some point page-navigation and some of these little tweaks will no longer be required * ui: Try running CI frontend tests in two parellel runs oss/ent * ui: Use correct make target, use different names for the reports	5 years ago
John Cowen	279cd874cc	ui: Ensure KV flags are passed through to Consul on update (#7216) ... * ui: always pass KV flags through on update * ui: Integration test to prove the flags queryParams gets passed through * ui: Add Flags to the KV updating acceptance tests	5 years ago
John Cowen	327aac9fe9	ui: Acceptance test improvements to prepare for more NS tests (#6980) ... * ui: Acceptance test improvements to prepare for more NS tests * ui: Namespace acceptance testing (#7005) * Update api-double and consul-api-double for http.body * Adds places where we missed passing the nspace through * Hardcode nspace CRUD to use the default nspace for policies and roles * Alter test helpers to allow us to control nspaces from the outside * Amends to allow tests to account for namespace, move ns from queryParam 1. We decided to move how we pass the namespace value through to the backend when performing write actions (create, update). Previoulsy we were using the queryParam although using the post body is the preferred method to send the Namespace details through to the backend. 2. Other various amends to take into account testing across multiple namespaced scenarios * Enable nspace testing by default * Remove last few occurances of old style http assertions We had informally 'deprecated' our old style of http assertions that relied on the order of http calls (even though that order was not important for the assertion). Following on from our namespace work we removed the majority of the old occrances of these old style assertions. This commit removes the remaining few, and also then cleans up the assertions/http.js file to only include the ones we are using. This reduces our available step count further and prevents any confusion over the usage of the old types and the new types. * ui: Namespace CRUD acceptance tests (#7016) * Upgrade consul-api-double * Add all the things required for testing: 1. edit and index page objects 2. enable CONSUL_NSPACE_COUNT cookie setting 3. enable mutating HTTP response bodies based on URL * Add acceptance test for nspace edit/delete/list and searching	5 years ago
John Cowen	36728b961f	ui: Various amends for 1.7beta (#6965) ... * Remove empty init * Actually make the disco chain endpoint send the nspace, note: The backend doesn't support this as yet. * Tweak the font size of flash-messages ever so slightly * Make sure the nspace menu is kept up to date when creating a new one * Move comment to the correct place * Only refresh the namespace menu if you specifically created a nspace * Change FIXMEs to TODOs as we are happy for these to wait until later	5 years ago
John Cowen	aa680d5f0c	ui: Discovery Chain (#6746) ... * Add data layer for discovery chain (model/adapter/serializer/repo) * Add routing plus template for routing tab * Add extra deps - consul-api-double upgrade plus ngraph for graphing * Add discovery-chain and related components and helpers: 1. discovery-chain to orchestrate/view controller 2. route-card, splitter-card, resolver card to represent the 3 different node types. 3. route-match helper for easy formatting of route rules 4. dom-position to figure out where things are in order to draw lines 5. svg-curve, simple wrapper around svg's <path d=""> attribute format. 6. data-structs service. This isn't super required but we are using other data-structures provided by other third party npm modules in other yet to be merged PRs. All of these types of things will live here for easy access/injection/changability 7. Some additions to our css-var 'polyfill' for a couple of extra needed rules * Related CSS for discovery chain 1. We add a %card base component here, eventually this will go into our base folder and %stats-card will also use it for a base component. 2. New icon for failovers * ui: Discovery Chain Continued (#6939) 1. Add in the things we use for the animations 2 Use IntersectionObserver so we know when the tab is visible, otherwise the dom-position helper won't work as the dom elements don't have any display. 3. Add some base work for animations and use them a little 4. Try to detect if a resolver is a redirect. Right now this works for datacenters and namespaces, but it can't work for services and subsets - we are awaiting backend support for doing this properly. 5. Add a fake 'this service has no routes' route that says 'Default' 6. redirect icon 7. Add CSS.escape polyfill for Edge	5 years ago
John Cowen	7044aa52c8	ui: Namespace Support (#6639) ... Adds namespace support to the UI: 1. Namespace CRUD/management 2. Show Namespace in relevant areas (intentions, upstreams) 3. Main navigation bar improvements 4. Logic/integration to interact with a new `internal/acl/authorize` endpoint	5 years ago
John Cowen	ab461f6603	ui: Remove `writable` usage from policy and use the request instead (#6934)	5 years ago
John Cowen	5a88d4ebe1	ui: Explicitly remove properties that shouldn't be sent when saving (#6917)	5 years ago
John Cowen	f691a29240	Ensure AbortErrors have a zero status (#6839)	5 years ago
John Cowen	b3b32dc0f6	ui: UI Release Merge (ui-staging merge) (#6527) ... ## HTTPAdapter (#5637) ## Ember upgrade 2.18 > 3.12 (#6448) ### Proxies can no longer get away with not calling _super This means that we can't use create anymore to define dynamic methods. Therefore we dynamically make 2 extended Proxies on demand, and then create from those. Therefore we can call _super in the init method of the extended Proxies. ### We aren't allowed to reset a service anymore We never actually need to now anyway, this is a remnant of the refactor from browser based confirmations. We fix it as simply as possible here but will revisit and remove the old browser confirm functionality at a later date ### Revert classes to use ES5 style to workaround babel transp. probs Using a mixture of ES6 classes (and hence super) and arrow functions means that when babel transpiles the arrow functions down to ES5, a reference to this is moved before the call to super, hence causing a js error. Furthermore, we the testing environment no longer lets use use apply/call on the constructor. These errors only manifests during testing (only in the testing environment), the application itself runs fine with no problems without this change. Using ES5 style class definitions give us freedom to do all of the above without causing any errors, so we reverted these classes back to ES5 class definitions ### Skip test that seems to have changed due to a change in RSVP timing This test tests a usecase/area of the API that will probably never ever be used, it was more testing out the API. We've skipped the test for now as this doesn't affect the application itself, but left a note to come back here later to investigate further ### Remove enumerableContentDidChange Initial testing looks like we don't need to call this function anymore, the function no longer exists ### Rework Changeset.isSaving to take into account new ember APIs Setting/hanging a computedProperty of an instantiated object no longer works. Move to setting it on the prototype/class definition instead ### Change how we detect whether something requires listening New ember API's have changed how you can detect whether something is a computedProperty or not. It's not immediately clear if its even possible now. Therefore we change how we detect whether something should be listened to or not by just looking for presence of `addEventListener` ### Potentially temporary change of ci test scripts to ensure deps exist All our tooling scripts run through a Makefile (for people familiar with only using those), which then call yarn scripts which can be called independently (for people familar with only using yarn). The Makefile targets always check to make sure all the dependencies are installed before running anything that requires them (building, testing etc). The CI scripts/targets didn't follow this same route and called the yarn scripts directly (usually CI builds a cache of the dependencies first). For some reason this cache isn't doing what it usually does, and it looks as though, in CI, ember isn't installed. This commit makes the CI scripts consistently use the same method as all of the other tooling scripts (Makefile target > Install Deps if required > call yarn script). This should install the dependencies if for some reason the CI cache building doesn't complete/isn't successful. Potentially this commit may be reverted if, the root of the problem is elsewhere, although consistency is always good, so it might be a good idea to leave this commit as is even if we need to debug and fix things elsewhere. ### Make test-parallel consistent with the rest of the tooling scripts As we are here making changes for CI purposes (making test-ci consistent), we spotted that test-parallel is also inconsistent and also the README manual instructions won't work without `ember` installed globally. This commit makes everything consistent and changes the manual instructions to use the local ember instance that gets installed via yarn ### Re-wrangle catchable to fit with new ember 3.12 APIs In the upgrade from ember 3.8 > 3.12 the public interfaces for ComputedProperties have changed slightly. `meta` is no longer a public property of ComputedProperty but of a ComputedDecoratorImpl mixin instead. 7e4ba1096e/packages/%40ember/-internals/metal/lib/computed.ts (L725) There seems to be no way, by just using publically available methods, to replicate this behaviour so that we can create our own 'ComputedProperty` factory via injecting the ComputedProperty class as we did previously. 3f333bada1/ui-v2/app/utils/computed/factory.js (L1-L18) Instead we dynamically hang our `Catchable` `catch` method off the instantiated ComputedProperty. In doing it like this `ComputedProperty` has already has its `meta` method mixed in so we don't have to manually mix it in ourselves (which doesn't seem possible) This functionality is only used during our work in trying to ensure our EventSource/BlockingQuery work was as 'ember-like' as possible (i.e. using the traditional Route.model hooks and ember-like Controller properties). Our ongoing/upcoming work on a componentized approach to data a.k.a `<DataSource />` means we will be able to remove the majority of the code involved here now that it seems to be under an amount of flux in ember. ### Build bindata_assetfs.go with new UI changes	5 years ago
John Cowen	24847b169e	ui: Leader icon for node listing view (#6265) ... - yarn upgrade consul-api-double which includes `status/leader` - add all the ember-data things required to call a new endpoint - Pass the new leader variable through to the template - use the new leader variable in the template to set a leader - add acceptance testing to verify leaders are highlighted - Change testing navigation/api requests to status/leader (on the node listing page, status/leader is now the last get request to be called). - Template whitespace commit (less indenting) - adds a test to to assert no errors happen with an unelected leader	5 years ago
John Cowen	482426b13e	UI: ACL Roles (#5635) ... Adds support for ACL Roles and Service Identities CRUD, along with necessary changes to Tokens, and the CSS improvements required. Also includes refinements/improvements for easier testing of deeply nested components. 1. ember-data adapter/serializer/model triplet for Roles 2. repository, form/validations and searching filter for Roles 3. Moves potentially, repeated, or soon to to repeated functionality into a mixin (mainly for 'many policy' relationships) 4. A few styling tweaks for little edge cases around roles 5. Router additions, Route, Controller and templates for Roles Also see: * UI: ACL Roles cont. plus Service Identities (#5661 and #5720)	6 years ago
John Cowen	355f034822	UI: Service Instances (#5326) ... This gives more prominence to 'Service Instances' as opposed to 'Services'. It also begins to surface Connect related 'nouns' such as 'Proxies' and 'Upstreams' and begins to interconnect them giving more visibility to operators. Various smaller changes: 1. Move healthcheck-status component to healthcheck-output 2. Create a new healthcheck-status component for showing the number of checks plus its icon 3. Create a new healthcheck-info component to group multiple statuses plus a different view if there are no checks 4. Componentize tag-list	6 years ago
John Cowen	cb0c5309c9	UI: Add EventSource ready for implementing blocking queries (#5070) ... - Maintain http headers as JSON-API meta for all API requests (#4946) - Add EventSource ready for implementing blocking queries - EventSource project implementation to enable blocking queries for service and node listings (#5267) - Add setting to enable/disable blocking queries (#5352)	6 years ago
John Cowen	516610eb0b	ui: Adds XHR connection management to HTTP/1.1 installs (#5083) ... Adds xhr connection managment to http/1.1 installs This includes various things: 1. An object pool to 'acquire', 'release' and 'dispose' of objects, also a 'purge' to completely empty it 2. A `Request` data object, mainly for reasoning about the object better 3. A pseudo http 'client' which doens't actually control the request itself but does help to manage the connections An initializer is used to detect the script element of the consul-ui sourcecode which we use later to sniff the protocol that we are most likely using for API access	6 years ago
John Cowen	ebfddaaace	ui: ember-data AbortError should have a `0` status (#5048)	6 years ago
John Cowen	7fc59af7e2	ui: Pass GET data and clean certain values for KV's ensuring consistency (#4991)	6 years ago
John Cowen	f7d2651ac3	ui: Maintain http headers as JSON-API meta for all API requests (#4946)	6 years ago
John Cowen	c8386ec0cc	UI: [BUGFIX] Decode/encode urls (#5206) ... In 858b05fc31 (diff-46ef88aa04507fb9b039344277531584) we removed encoding values in pathnames as we thought they were eventually being encoded by `ember`. It looks like this isn't the case. Turns out sometimes they are encoded sometimes they aren't. It's complicated. If at all possible refer to the PR https://github.com/hashicorp/consul/pull/5206. It's related to the difference between `dynamic` routes and `wildcard` routes. Partly related to this is a decision on whether we urlencode the slashes within service names or not. Whilst historically we haven't done this, we feel its a good time to change this behaviour, so we'll also be changing services to use dynamic routes instead of wildcard routes. So service links will then look like /ui/dc-1/services/application%2Fservice rather than /ui/dc-1/services/application/service Here, we define our routes in a declarative format (for the moment at least JSON) outside of Router.map, and loop through this within Router.map to set all our routes using the standard this.route method. We essentially configure our Router from the outside. As this configuration is now done declaratively outside of Router.map we can also make this data available to href-to and paramsFor, allowing us to detect wildcard routes and therefore apply urlencoding/decoding. Where I mention 'conditionally' below, this is detection is what is used for the decision. We conditionally add url encoding to the `{{href-to}}` helper/addon. The reasoning here is, if we are asking for a 'href/url' then whatever we receive back should always be urlencoded. We've done this by reusing as much code from the original `ember-href-to` addon as possible, after this change every call to the `{{href-to}}` helper will be urlencoded. As all links using `{{href-to}}` are now properly urlencoded. We also need to decode them in the correct place 'on the other end', so.. We also override the default `Route.paramsFor` method to conditionally decode all params before passing them to the `Route.model` hook. Lastly (the revert), as we almost consistently use url params to construct API calls, we make sure we re-encode any slugs that have been passed in by the user/developer. The original API for the `createURL` function was to allow you to pass values that didn't need encoding, values that **did** need encoding, followed by query params (which again require url encoding) All in all this should make the entire ember app url encode/decode safe.	6 years ago
John Cowen	7d89e519a2	UI: New ACLs (#4789) ... UI to accompany the new ACLs APIs	6 years ago
John Cowen	b75731aaec	ui: Cope with service names that contain slashes (#4756)	6 years ago
John Cowen	12811c0844	UI - Refactor Adapter.handleResponse (#4398) ... * Add some tests to check the correct GET API endpoints are called * Refactor adapters 1. Add integration tests for `urlFor...` and majority `handleResponse` methods 2. Refactor out `handleResponse` a little more into single/batch/boolean methods 3. Move setting of the `Datacenter` property into the `handleResponse` method, basically the same place that the uid is being set using the dc parsed form the URL 4. Add some Errors for if you don't pass ids to certain `urlFor` methods	6 years ago
John Cowen	b29546e578	Looking into atob functionality, consequence of Value: null ... The Consul API can pass through `Value: null` which does not get cast to a string by ember-data. This snowballs into problems with `atob` which then tried to decode `null`. There are 2 problems here. 1. `Value` should never be `null` - I've added a removeNull function to shallowly loop though props and remove properties that are `null`, for the moment this is only on single KV JSON responses - therefore `Value` will never be `null` which is the root of the problem 2. `atob` doesn't quite follow the `window.atob` API in that the `window.atob` API casts everything down to a string first, therefore it will try to decode `null` > `'null'` > `crazy unicode thing`. - I've commented in a fix for this, but whilst this shouldn't be causing anymore problems in our UI (now that `Value` is never `null`), I'll uncomment it in another future release. Tests are already written for it which more closely follow `window.atob` but skipped for now (next commit)	6 years ago
John Cowen	6398fb02c7	Ensure we catch empty ID's for single nodes also ... I don't think this would have a large effect on the UI whichever but best to make sure	6 years ago
John Cowen	a47a0b617f	Hedge for when consul sends nodes with an empty ID	6 years ago
John Cowen	b0ff68cd7d	Lint	7 years ago
John Cowen	55bc45832e	Tie up real endpoints	7 years ago
John Cowen	b38e5df630	WIP: First draft intentions ... 1. Listing, filtering by action and searching by source name and destination name 2. Edit/Create page, edits ping the API double fine, need to work through creates and deletes 3. Currently uses a `Precedence` intention keyname that doesn't yet exist in the real API	7 years ago
John Cowen	e5eeb0aa7c	UI V2 (#4086) ... * Move settings to use the same service/route API as the rest of the app * Put some ideas down for unit testing on adapters * Favour `Model` over `Entity` * Move away from using `reopen` to using Mixins * Amend messages, comment/document some usage * Make sure the returns are consistent in normalizePayload, also Add some todo's in to remind me to think consider this further at a later date. For example, is normalizePayload to be a hook or an overridable method * Start stripping back the HTML to semantics * Use a variable rather than chaining * Remove unused helpers * Start picking through the new designs, start with listing pages * First draft HTML for every page * Making progress on the CSS * Keep plugging away at the catalog css * Looking at scrolling * Wire up filtering * Sort out filter counting, more or less done a few outstanding * Start knocking the forms into shape * Add in codemirror * Keep moving forwards with the form like layouts * Start looking at ACL editing page, add footer in * Pull the filters back in, look at an autoresizer for scroll views * First draft toggles * 2nd draft healthcheck icons * Tweak node healthcheck icons * Looking at healthcheck detail icons * Tweak the filter-bar and add selections to the in content tabs * Add ACL create, pill-like acl type highlight * Tweaking the main nav some more * Working on the filter-bar and freetext-filter * Masonry layout * Stick with `checks` instead of healthy/unhealthy * Fix up the filter numbers/counts * Use the thead for a measure * First draft tomography back in * First draft DC dropdown * Add a temporary create buttong to kv's * Move KV and ACL to use a create page * Move tags * Run through old tests * Injectable server * Start adding test attributes * Add some page objects * More test attributes and pages * Acl filter objects * Add a page.. page object * Clickable items in lists * Add rest/spread babel plugin, remove mirage for now * Add fix for ember-collection * Keep track of acl filters * ember-cli-page-object * ember-test-selectors * ui: update version of ui compile deps * Update static assets * Centralize radiogroup helper * Rejig KV's and begin to clean it up * Work around lack of Tags for the moment.. * Some little css tweaks and start to remove possibles * Working on the dc page and incidentals 1. Sort the datacenter-picker list 2. Add a selected state to the datacenter-picker 3. Make dc an {Name: dc} 4. Add an env helper to get to 'env vars' from within templates * Click outside stuff for the datacenter-picker, is-active on nav * Make sure the dropdown CTA can be active * Bump ember add pluralize helper * Little try at sass based custom queries * Rejig tablular collection so it deals with resizing, actions 1. WIP: start building actions dropdowns 2. Move tabular collection to deal with resizing to rule out differences * First draft actions dropdowns * Add ports, selectable IP's * Flash messages, plus general cleanup/consistency 1. Add ember-cli-flash for flash messages 2. Move everything to get() instead of item.get 3. Spotted a few things that weren't consistent * DOn't go lower than zero * First draft vertical menu * Missed a get, tweak dropmenu tick * Big cleanup 1. this.get(), this.set() > get(), set() 2. assign > {...{}, ...{}} 3. Seperator > separator * WIP: settings * Moved things into a ui-v2 folder * Decide on a way to do the settings page whilst maintaining the url + dc's * Start some error pages * Remove base64 polyfill * Tie in settings, fix atob bug, tweak layout css * Centralize confirmations into a component * Allow switching between the old and new UI with the CONSUL_UI_BETA env var Currently all the assets are packaged into a single AssetFS and a prefix is configured to switch between the two. * Attempt at some updates to integrate the v2 ui build into the main infrastructure * Add redirect to index.html for unknown paths * Allow redictor to /index.html for new ui when using -ui-dir * Take ACLs to the correct place on save * First pass breadcrumbs * Remove datacenter selector on the index page * Tweak overall layout * Make buttons 'resets' * Tweak last DC stuff * Validations plus kv keyname viewing tweaks * Pull sessions back in * Tweak the env vars to be more reusable * Move isAnon to the view * No items and disabled acl css * ACL and KV details 1. Unauthorized page 2. Make sure the ACL is always selected when it needs it 3. Check record deletion with a changeset * Few more acl tweaks/corrections * Add no items view to node > services * Tags for node > services * Make sure we have tags * Fix up the labels on the tomography graph * Add node link (agent) to kv sessions * Duplicate up `create` for KV 'root creation' * Safety check for health checks * Fix up the grids * Truncate td a's, fix kv columns * Watch for spaces in KV id's * Move actions to their own mixins for now at least * Link reset to settings incase I want to type it in * Tweak error page * Cleanup healthcheck icons in service listing * Centralize errors and make getting back easier * Nice numbers * Compact buttons * Some incidental css cleanups * Use 'Key / Value' for root * Tweak tomography layout * Fix single healthcheck unhealthy resource * Get loading screen ready * Fix healthy healthcheck tick * Everything in header starts white * First draft loader * Refactor the entire backend to use proper unique keys, plus.. 1. Make unique keys form dc + slug (uid) 2. Fun with errors... * Tweak header colors * Add noopener noreferrer to external links * Add supers to setupController * Implement cloning, using ember-data... * Move the more expensive down the switch order * First draft empty record cleanup.. * Add the cusomt store test * Temporarily use the htmlSafe prototype to remove the console warning * Encode hashes in urls * Go back to using title for errors for now * Start removing unused bulma * Lint * WIP: Start looking at failing tests * Remove single redirect test * Finish off error message styling * Add full ember-data cache invalidation to avoid stale data... * Add uncolorable warning icons * More info icon * Rearrange single service, plus tag printing * Logo * No quotes * Add a simple startup logo * Tweak healthcheck statuses * Fix border-color for healthchecks * Tweak node tabs * Catch 401 ACL errors and rethrow with the provided error message * Remove old acl unauth and error routes * Missed a super * Make 'All' refer to number of checks, not services * Remove ember-resizer, add autoprefixer * Don't show tomography if its not worth it, viewify it more also * Little model cleanup * Chevrons * Find a way to reliably set the class of html from the view * Consistent html * Make sure session id's are visible as long as possible * Fix single service check count * Add filters and searchs to the query string * Don't remember the selected tab * Change text * Eror tweaking * Use chevrons on all breadcrumbs even in kv's * Clean up a file * Tweak some messaging * Makesure the footer overlays whats in the page * Tweak KV errors * Move json toggle over to the right * feedback-dialog along with copy buttons * Better confirmation dialogs * Add git sha comment * Same title as old UI * Allow defaults * Make sure value is a string * WIP: Scrolling dropdowns/confirmations * Add to kv's * Remove set * First pass trace * Better table rows * Pull over the hashi code editor styles * Editor tweaks * Responsive tabs * Add number formatting to tomography * Review whats left todo * Lint * Add a coordinate ember data triplet * Bump in a v2.0.0 * Update old tests * Get coverage working again * Make sure query keys are also encoded * Don't test console.error * Unit test some more utils * Tweak the size of the tabular collections * Clean up gitignore * Fix copy button rollovers * Get healthcheck 'icon icons' onto the text baseline * Tweak healthcheck padding and alignment * Make sure commas kick in in rtt, probably never get to that * Improve vertical menu * Tweak dropdown active state to not have a bg * Tweak paddings * Search entire string not just 'startsWith' * Button states * Most buttons have 1px border * More button tweaks * You can only view kv folders * CSS cleanup reduction * Form input states and little cleanup * More CSS reduction * Sort checks by importance * Fix click outside on datacenter picker * Make sure table th's also auto calculate properly * Make sure `json` isn't remembered in KV editing * Fix recursive deletion in KV's * Centralize size * Catch updateRecord * Don't double envode * model > item consistency * Action loading and ACL tweaks * Add settings dependencies to acl tests * Better loading * utf-8 base64 encode/decode * Don't hang off a prototype for htmlSafe * Missing base64 files... * Get atob/btoa polyfill right * Shadowy rollovers * Disabled button styling for primaries * autofocuses only onload for now * Fix footer centering * Beginning of 'notices' * Remove the isLocked disabling as we are letting you do what the API does * Don't forget the documentation link for sessions * Updates are more likely * Use exported constant * Dont export redirectFS and a few other PR updates * Remove the old bootstrap config which was used for the old UI skin * Use curlies for multiple properties	7 years ago