748 Commits (81931e52c3a0ba920af6e89ae2ea56ff64147c3c)

Author	SHA1	Message	Date
Matt Keeler	f74d0cef7a	Implement/Utilize secrets for Peering Replication Stream (#13977)	2 years ago
DanStough	2da8949d78	feat: convert destination address to slice	2 years ago
freddygv	b544ce6485	Add ACL enforcement to peering endpoints	2 years ago
Eric Haberkorn	501089292e	Add Cluster Peering Failover Support to Prepared Queries (#13835) ... Add peering failover support to prepared queries	2 years ago
Nitya Dhanushkodi	f47319b7c6	update generate token endpoint to take external addresses (#13844) ... Update generate token endpoint (rpc, http, and api module) If ServerExternalAddresses are set, it will override any addresses gotten from the "consul" service, and be used in the token instead, and dialed by the dialer. This allows for setting up a load balancer for example, in front of the consul servers.	2 years ago
alex	de5a991d8c	peering: refactor reconcile, cleanup (#13795) ... Signed-off-by: acpana <8968914+acpana@users.noreply.github.com>	2 years ago
R.B. Boyer	0678bf91a7	test: fix flaky test TestAPI_CatalogNodes (#13779)	2 years ago
Evan Culver	d523d005d9	Latest submodule versions (#13750)	2 years ago
Matt Keeler	05b5e7e2ca	Enable partition support for peering establishment (#13772) ... Prior to this the dialing side of the peering would only ever work within the default partition. This commit allows properly parsing the partition field out of the API struct request body, query param and header.	2 years ago
Chris S. Kim	f07132dacc	Revise possible states for a peering. (#13661) ... These changes are primarily for Consul's UI, where we want to be more specific about the state a peering is in. - The "initial" state was renamed to pending, and no longer applies to peerings being established from a peering token. - Upon request to establish a peering from a peering token, peerings will be set as "establishing". This will help distinguish between the two roles: the cluster that generates the peering token and the cluster that establishes the peering. - When marked for deletion, peering state will be set to "deleting". This way the UI determines the deletion via the state rather than the "DeletedAt" field. Co-authored-by: freddygv <freddy@hashicorp.com>	2 years ago
alex	cd9ca4290a	peering: add imported/exported counts to peering (#13644) ... Signed-off-by: acpana <8968914+acpana@users.noreply.github.com> Co-authored-by: Chris S. Kim <ckim@hashicorp.com>	2 years ago
alex	beb8b03e8a	peering: reconcile/ hint active state for list (#13619) ... Signed-off-by: acpana <8968914+acpana@users.noreply.github.com>	2 years ago
freddygv	6453375ab2	Add leader routine to clean up peerings ... Once a peering is marked for deletion a new leader routine will now clean up all imported resources and then the peering itself. A lot of the logic was grabbed from the namespace/partitions deferred deletions but with a handful of simplifications: - The rate limiting is not configurable. - Deleting imported nodes/services/checks is done by deleting nodes with the Txn API. The services and checks are deleted as a side-effect. - There is no "round rate limiter" like with namespaces and partitions. This is because peerings are purely local, and deleting a peering in the datacenter does not depend on deleting data from other DCs like with WAN-federated namespaces. All rate limiting is handled by the Raft rate limiter.	2 years ago
freddygv	20955742a7	Fixup api test	2 years ago
freddygv	cc921a9c78	Update peering state and RPC for deferred deletion ... When deleting a peering we do not want to delete the peering and all imported data in a single operation, since deleting a large amount of data at once could overload Consul. Instead we defer deletion of peerings so that: 1. When a peering deletion request is received via gRPC the peering is marked for deletion by setting the DeletedAt field. 2. A leader routine will monitor for peerings that are marked for deletion and kick off a throttled deletion of all imported resources before deleting the peering itself. This commit mostly addresses point #1 by modifying the peering service to mark peerings for deletion. Another key change is to add a PeeringListDeleted state store function which can return all peerings marked for deletion. This function is what will be watched by the deferred deletion leader routine.	2 years ago
R.B. Boyer	7001e1151c	peering: rename initiate to establish in the context of the APIs (#13419)	2 years ago
Chris S. Kim	bb832e2bba	Add SourcePeer fields to relevant Intentions types (#13390)	3 years ago
Fulvio	d457d8b6ce	UDP check for service stanza #12221 (#12722) ... * UDP check for service stanza #12221 * add pass status on timeout condition * delete useless files * Update check_test.go improve comment in test * fix test * fix requested changes and update TestRuntimeConfig_Sanitize.golden * add freeport to TestCheckUDPCritical * improve comment for CheckUDP struct * fix requested changes * fix requested changes * fix requested changes * add UDP to proto * add UDP to proto and add a changelog * add requested test on agent_endpoint_test.go * add test for given endpoints * fix failing tests * add documentation for udp healthcheck * regenerate proto using buf * Update website/content/api-docs/agent/check.mdx Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com> * Update website/content/api-docs/agent/check.mdx Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com> * Update website/content/docs/discovery/checks.mdx Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com> * Update website/content/docs/ecs/configuration-reference.mdx Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com> * Update website/content/docs/ecs/configuration-reference.mdx Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com> * add debug echo * add debug circle-ci * add debug circle-ci bash * use echo instead of status_stage * remove debug and status from devtools script and use echo instead * Update website/content/api-docs/agent/check.mdx Co-authored-by: Jared Kirschner <85913323+jkirschner-hashicorp@users.noreply.github.com> * fix test * replace status_stage with status * replace functions with echo Co-authored-by: Dhia Ayachi <dhia@hashicorp.com> Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com> Co-authored-by: Jared Kirschner <85913323+jkirschner-hashicorp@users.noreply.github.com>	3 years ago
Freddy	143dc75e0d	[OSS] Pull split ns/partition var out of testing file (#13337) ... The api module previously had defaultPartition and defaultNamespace vars for when we need default/empty split usage between ent/oss respectively. This commit moves those two variables out of test code so that they can be used for the service exports config entry's `GetNamespace()` method. Previously `GetNamespace()` would return "default" in both OSS and enterprise, which can trip up automation that passes the result of this method as the namespace to write a config entry. The split vars are kept private to prevent external usage, and prefixed with `split` for more clarity about their behavior.	3 years ago
Dhia Ayachi	1b779240ae	update gateway-services table with endpoints (#13217) ... * update gateway-services table with endpoints * fix failing test * remove unneeded config in test * rename "endpoint" to "destination" * more endpoint renaming to destination in tests * update isDestination based on service-defaults config entry creation * use a 3 state kind to be able to set the kind to unknown (when neither a service or a destination exist) * set unknown state to empty to avoid modifying alot of tests * fix logic to set the kind correctly on CRUD * fix failing tests * add missing tests and fix service delete * fix failing test * Apply suggestions from code review Co-authored-by: Dan Stough <dan.stough@hashicorp.com> * fix a bug with kind and add relevant test * fix compile error * fix failing tests * add kind to clone * fix failing tests * fix failing tests in catalog endpoint * fix service dump test * Apply suggestions from code review Co-authored-by: Dan Stough <dan.stough@hashicorp.com> * remove duplicate tests * rename consts and fix kind when no destination is defined in the service-defaults. * rename Kind to ServiceKind and change switch to use .(type) Co-authored-by: Dan Stough <dan.stough@hashicorp.com>	3 years ago
Riddhi Shah	d8d8c8603e	Add support for merge-central-config query param (#13001) ... Adds a new query param merge-central-config for use with the below endpoints: /catalog/service/:service /catalog/connect/:service /health/service/:service /health/connect/:service If set on the request, the response will include a fully resolved service definition which is merged with the proxy-defaults/global and service-defaults/:service config entries (on-demand style). This is useful to view the full service definition for a mesh service (connect-proxy kind or gateway kind) which might not be merged before being written into the catalog (example: in case of services in the agentless model).	3 years ago
R.B. Boyer	a85b8a4705	api: ensure peering API endpoints do not use protobufs (#13204) ... I noticed that the JSON api endpoints for peerings json encodes protobufs directly, rather than converting them into their `api` package equivalents before marshal/unmarshaling them. I updated this and used `mog` to do the annoying part in the middle. Other changes: - the status enum was converted into the friendlier string form of the enum for readability with tools like `curl` - some of the `api` library functions were slightly modified to match other similar endpoints in UX (cc: @ndhanushkodi ) - peeringRead returns `nil` if not found - partitions are NOT inferred from the agent's partition (matching 1.11-style logic)	3 years ago
DanStough	817449041d	chore(test): Update bats version	3 years ago
DanStough	147fd96d97	feat: add endpoint struct to ServiceConfigEntry	3 years ago
funkiestj	6167400b28	api: add the ability to specify a path prefix (#12914) ... Specifically meant for when consul is behind a reverse proxy / API gateway Co-authored-by: Evan Culver <eculver@hashicorp.com>	3 years ago
Evan Culver	51dc26db4e	peering: fix panic in test (#13069)	3 years ago
R.B. Boyer	901fd4dd68	remove remaining shim runStep functions (#13015) ... Wraps up the refactor from #13013	3 years ago
R.B. Boyer	0d6d16ddfb	add general runstep test helper instead of copying it all over the place (#13013)	3 years ago
FFMMM	37a1e33834	expose meta tags for peering (#12964)	3 years ago
FFMMM	745bd15b15	api: add PeeeringList, polish (#12934)	3 years ago
Mark Anderson	6430af1c0e	Update mesh config tests ... Signed-off-by: Mark Anderson <manderson@hashicorp.com>	3 years ago
Mark Anderson	fee6c7a7b6	Fixup missed config entry ... Signed-off-by: Mark Anderson <manderson@hashicorp.com>	3 years ago
FFMMM	3b3f001580	[sync oss] api: add peering api module (#12911)	3 years ago
Chris S. Kim	9791bad136	peering: Make Upstream peer-aware (#12900) ... Adds DestinationPeer field to Upstream. Adds Peer field to UpstreamID and its string conversion functions.	3 years ago
R.B. Boyer	1a491886fa	structs: ensure exported-services PeerName field can be addressed as peer_name (#12862)	3 years ago
R.B. Boyer	f507f62f3c	peering: initial sync (#12842) ... - Add endpoints related to peering: read, list, generate token, initiate peering - Update node/service/check table indexing to account for peers - Foundational changes for pushing service updates to a peer - Plumb peer name through Health.ServiceNodes path see: ENT-1765, ENT-1280, ENT-1283, ENT-1283, ENT-1756, ENT-1739, ENT-1750, ENT-1679, ENT-1709, ENT-1704, ENT-1690, ENT-1689, ENT-1702, ENT-1701, ENT-1683, ENT-1663, ENT-1650, ENT-1678, ENT-1628, ENT-1658, ENT-1640, ENT-1637, ENT-1597, ENT-1634, ENT-1613, ENT-1616, ENT-1617, ENT-1591, ENT-1588, ENT-1596, ENT-1572, ENT-1555 Co-authored-by: R.B. Boyer <rb@hashicorp.com> Co-authored-by: freddygv <freddy@hashicorp.com> Co-authored-by: Chris S. Kim <ckim@hashicorp.com> Co-authored-by: Evan Culver <eculver@hashicorp.com> Co-authored-by: Nitya Dhanushkodi <nitya@hashicorp.com>	3 years ago
DanStough	95250e7915	Update go version to 1.18.1	3 years ago
Dhia Ayachi	09f2dd4d59	add queryBackend to the api query meta. (#12791) ... * add queryBackend to the api query meta. * add a changelog * use string type instead of int * Apply suggestions from code review Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>	3 years ago
Kyle Havlovitz	3e88f579fc	Fix namespace default field names in expanded token output	3 years ago
R.B. Boyer	25ba9c147a	xds: ensure that all connect timeout configs can apply equally to tproxy direct dial connections (#12711) ... Just like standard upstreams the order of applicability in descending precedence: 1. caller's `service-defaults` upstream override for destination 2. caller's `service-defaults` upstream defaults 3. destination's `service-resolver` ConnectTimeout 4. system default of 5s Co-authored-by: mrspanishviking <kcardenas@hashicorp.com>	3 years ago
R.B. Boyer	d06183ba7f	syncing changes back from enterprise (#12701)	3 years ago
Kyle Havlovitz	b21b4346b4	Add expanded token read flag and endpoint option	3 years ago
R.B. Boyer	e79ce8ab03	xds: adding control of the mesh-wide min/max TLS versions and cipher suites from the mesh config entry (#12601) ... - `tls.incoming`: applies to the inbound mTLS targeting the public listener on `connect-proxy` and `terminating-gateway` envoy instances - `tls.outgoing`: applies to the outbound mTLS dialing upstreams from `connect-proxy` and `ingress-gateway` envoy instances Fixes #11966	3 years ago
R.B. Boyer	ac5bea862a	server: ensure that service-defaults meta is incorporated into the discovery chain response (#12511) ... Also add a new "Default" field to the discovery chain response to clients	3 years ago
Eric	02d8a11ff0	remove gogo from acl protobufs	3 years ago
John Eikenberry	2da701b90c	fix godoc comment for Namespaces client method ... Namespaces method godoc has same sentence as Operator method. Presumably a cut-n-paste error. Fix that.	3 years ago
R.B. Boyer	80dfcb1bcd	raft: update to v1.3.5 (#12325) ... This includes closing some leadership transfer gaps and adding snapshot restore progress logging.	3 years ago
Chris S. Kim	f5d816dace	Remove incorrect usage of url.PathEscape (#12184) ... When r.toHTTP is called, http.Request is built with the path already escaped. This removes all calls to url.PathEscape that would have led to double-escaped URLs.	3 years ago
Dao Thanh Tung	6765c0d965	Add api changes to agent endpoint for part 2 (#12150)	3 years ago
R.B. Boyer	b60d89e7ef	bulk rewrite using this script ... set -euo pipefail unset CDPATH cd "$(dirname "$0")" for f in $(git grep '\brequire := require\.New(' | cut -d':' -f1 | sort -u); do echo "=== require: $f ===" sed -i '/require := require.New(t)/d' $f # require.XXX(blah) but not require.XXX(tblah) or require.XXX(rblah) sed -i 's/\brequire\.\([a-zA-Z0-9_]*\)(\([^tr]\)/require.\1(t,\2/g' $f # require.XXX(tblah) but not require.XXX(t, blah) sed -i 's/\brequire\.\([a-zA-Z0-9_]*\)(\(t[^,]\)/require.\1(t,\2/g' $f # require.XXX(rblah) but not require.XXX(r, blah) sed -i 's/\brequire\.\([a-zA-Z0-9_]*\)(\(r[^,]\)/require.\1(t,\2/g' $f gofmt -s -w $f done for f in $(git grep '\bassert := assert\.New(' | cut -d':' -f1 | sort -u); do echo "=== assert: $f ===" sed -i '/assert := assert.New(t)/d' $f # assert.XXX(blah) but not assert.XXX(tblah) or assert.XXX(rblah) sed -i 's/\bassert\.\([a-zA-Z0-9_]*\)(\([^tr]\)/assert.\1(t,\2/g' $f # assert.XXX(tblah) but not assert.XXX(t, blah) sed -i 's/\bassert\.\([a-zA-Z0-9_]*\)(\(t[^,]\)/assert.\1(t,\2/g' $f # assert.XXX(rblah) but not assert.XXX(r, blah) sed -i 's/\bassert\.\([a-zA-Z0-9_]*\)(\(r[^,]\)/assert.\1(t,\2/g' $f gofmt -s -w $f done	3 years ago