68 Commits (8110ecc93bb665e1d7190c5b5f20a0cca109304e)

Author	SHA1	Message	Date
R.B. Boyer	424f3cdd2c	proxycfg: introduce explicit UpstreamID in lieu of bare string (#12125) ... The gist here is that now we use a value-type struct proxycfg.UpstreamID as the map key in ConfigSnapshot maps where we used to use "upstream id-ish" strings. These are internal only and used just for bidirectional trips through the agent cache keyspace (like the discovery chain target struct). For the few places where the upstream id needs to be projected into xDS, that's what (proxycfg.UpstreamID).EnvoyID() is for. This lets us ALWAYS inject the partition and namespace into these things without making stuff like the golden testdata diverge.	3 years ago
Daniel Upton	50a1f20ff9	xds: prefer fed state gateway definitions if they're fresher (#11522) ... Fixes an issue described in #10132, where if two DCs are WAN federated over mesh gateways, and the gateway in the non-primary DC is terminated and receives a new IP address (as is commonly the case when running them on ephemeral compute instances) the primary DC is unable to re-establish its connection until the agent running on its own gateway is restarted. This was happening because we always preferred gateways discovered by the `Internal.ServiceDump` RPC (which would fail because there's no way to dial the remote DC) over those discovered in the federation state, which is replicated as long as the primary DC's gateway is reachable.	3 years ago
freddygv	60066e5154	Exclude default partition from GatewayKey string ... This will behave the way we handle SNI and SPIFFE IDs, where the default partition is excluded. Excluding the default ensures that don't attempt to compare default.dc2 to dc2 in OSS.	3 years ago
freddygv	90ce897456	Store GatewayKey in proxycfg snapshot for re-use	3 years ago
freddygv	7e65678c52	Update mesh gateway proxy watches for partitions ... This commit updates mesh gateway watches for cross-partitions communication. * Mesh gateways are keyed by partition and datacenter. * Mesh gateways will now watch gateways in partitions that export services to their partition. * Mesh gateways in non-default partitions will not have cross-datacenter watches. They are not involved in traditional WAN federation.	3 years ago
freddygv	b9b6447977	Finish removing useInDatacenter	3 years ago
freddygv	62e0fc62c1	Configure sidecars to watch gateways in partitions ... Previously the datacenter of the gateway was the key identifier, now it is the datacenter and partition. When dialing services in other partitions or datacenters we now watch the appropriate partition.	3 years ago
Paul Banks	ccbda0c285	Update proxycfg to hold more ingress config state	3 years ago
Paul Banks	e22cc9c53a	Header manip for split legs plumbing	3 years ago
Paul Banks	83fc8723a3	Header manip for service-router plumbed through	3 years ago
Paul Banks	f439dfc04f	Ingress gateway header manip plumbing	3 years ago
Dhia Ayachi	bc0e4f2f46	partition dicovery chains (#10983) ... * partition dicovery chains * fix default partition for OSS	3 years ago
freddygv	f52bd80f6d	Update comment for test function	3 years ago
freddygv	af52d21884	Update prepared query cluster SAN validation ... Previously SAN validation for prepared queries was broken because we validated against the name, namespace, and datacenter for prepared queries. However, prepared queries can target: - Services with a name that isn't their own - Services in multiple datacenters This means that the SpiffeID to validate needs to be based on the prepared query endpoints, and not the prepared query's upstream definition. This commit updates prepared query clusters to account for that.	3 years ago
freddygv	85878685b7	Fixup proxy config test fixtures ... - The TestNodeService helper created services with the fixed name "web", and now that name is overridable. - The discovery chain snapshot didn't have prepared query endpoints so the endpoints tests were missing data for prepared queries	3 years ago
R.B. Boyer	097e1645e3	agent: ensure that most agent behavior correctly respects partition configuration (#10880)	3 years ago
Mark Anderson	6be9cebad0	Add tests for xds/listeners ... Signed-off-by: Mark Anderson <manderson@hashicorp.com>	4 years ago
R.B. Boyer	71d45a3460	Support Incremental xDS mode (#9855) ... This adds support for the Incremental xDS protocol when using xDS v3. This is best reviewed commit-by-commit and will not be squashed when merged. Union of all commit messages follows to give an overarching summary: xds: exclusively support incremental xDS when using xDS v3 Attempts to use SoTW via v3 will fail, much like attempts to use incremental via v2 will fail. Work around a strange older envoy behavior involving empty CDS responses over incremental xDS. xds: various cleanups and refactors that don't strictly concern the addition of incremental xDS support Dissolve the connectionInfo struct in favor of per-connection ResourceGenerators instead. Do a better job of ensuring the xds code uses a well configured logger that accurately describes the connected client. xds: pull out checkStreamACLs method in advance of a later commit xds: rewrite SoTW xDS protocol tests to use protobufs rather than hand-rolled json strings In the test we very lightly reuse some of the more boring protobuf construction helper code that is also technically under test. The important thing of the protocol tests is testing the protocol. The actual inputs and outputs are largely already handled by the xds golden output tests now so these protocol tests don't have to do double-duty. This also updates the SoTW protocol test to exclusively use xDS v2 which is the only variant of SoTW that will be supported in Consul 1.10. xds: default xds.Server.AuthCheckFrequency at use-time instead of construction-time	4 years ago
freddygv	a54d6a9010	Update proxycfg for transparent proxy	4 years ago
freddygv	768dbaa68d	Add session flag to cookie config	4 years ago
freddygv	eab90ea9fa	Revert EnvoyConfig nesting	4 years ago
freddygv	30ba080d25	Add explicit protocol overrides in tgw xds test cases	4 years ago
freddygv	f81fe6a1a1	Remove LB infix and move injection to xds	4 years ago
freddygv	63f79e5f9b	Restructure structs and other PR comments	4 years ago
freddygv	28d0602fc1	Pass LB config to Envoy via xDS	4 years ago
R.B. Boyer	74d5df7c7a	xds: use envoy's rbac filter to handle intentions entirely within envoy (#8569)	4 years ago
Matt Keeler	be01c4241d	Default Cache rate limiting options in New ... Also get rid of the TestCache helper which was where these defaults were happening previously.	4 years ago
Matt Keeler	12acdd7481	Disable background cache refresh for Connect Leaf Certs ... The rationale behind removing them is that all of our own code (xDS, builtin connect proxy) use the cache notification mechanism. This ensures that the blocking fetch behind the scenes is always executing. Therefore the only way you might go to get a certificate and have to wait is when 1) the request has never been made for that cert before or 2) you are using the v1/agent/connect/ca/leaf API for retrieving the cert yourself. In the first case, the refresh change doesn’t alter the behavior. In the second case, it can be mitigated by using blocking queries with that API which just like normal cache notification mechanism will cause the blocking fetch to be initiated and to get leaf certs as soon as needed. If you are not using blocking queries, or Envoy/xDS, or the builtin connect proxy but are retrieving the certs yourself then the HTTP endpoint might take a little longer to respond. This also renames the RefreshTimeout field on the register options to QueryTimeout to more accurately reflect that it is used for any type that supports blocking queries.	4 years ago
Freddy	5baa7b1b04	Always return a gateway cluster (#8158)	5 years ago
Daniel Nephin	068b43df90	Enable gofmt simplify ... Code changes done automatically with 'gofmt -s -w'	5 years ago
freddygv	19e3954603	Move compound service names to use ServiceName type	5 years ago
Freddy	9ed325ba8b	Enable gateways to resolve hostnames to IPv4 addresses (#7999) ... The DNS resolution will be handled by Envoy and defaults to LOGICAL_DNS. This discovery type can be overridden on a per-gateway basis with the envoy_dns_discovery_type Gateway Option. If a service contains an instance with a hostname as an address we set the Envoy cluster to use DNS as the discovery type rather than EDS. Since both mesh gateways and terminating gateways route to clusters using SNI, whenever there is a mix of hostnames and IP addresses associated with a service we use the hostname + CDS rather than the IPs + EDS. Note that we detect hostnames by attempting to parse the service instance's address as an IP. If it is not a valid IP we assume it is a hostname.	5 years ago
Kyle Havlovitz	f14c54e25e	Add TLS option and DNS SAN support to ingress config ... xds: Only set TLS context for ingress listener when requested	5 years ago
Kyle Havlovitz	711d1389aa	Support multiple listeners referencing the same service in gateway definitions	5 years ago
Kyle Havlovitz	247f9eaf13	Allow ingress gateways to route traffic based on Host header ... This commit adds the necessary changes to allow an ingress gateway to route traffic from a single defined port to multiple different upstream services in the Consul mesh. To do this, we now require all HTTP requests coming into the ingress gateway to specify a Host header that matches "<service-name>.*" in order to correctly route traffic to the correct service. - Differentiate multiple listener's route names by port - Adds a case in xds for allowing default discovery chains to create a route configuration when on an ingress gateway. This allows default services to easily use host header routing - ingress-gateways have a single route config for each listener that utilizes domain matching to route to different services.	5 years ago
Freddy	137a2c32c6	TLS Origination for Terminating Gateways (#7671)	5 years ago
freddygv	09a8e5f36d	Use golden files for gateway certs and fix listener test flakiness	5 years ago
freddygv	913b13f31f	Add subset support	5 years ago
freddygv	219c78e586	Add xds cluster/listener/endpoint management	5 years ago
Chris Piraino	cb9df538d5	Add all the xds ingress tests ... This commit copies many of the connect-proxy xds testcases and reuses for ingress gateways. This allows us to more easily see changes to the envoy configuration when make updates to ingress gateways.	5 years ago
Chris Piraino	0ca9b606e8	Pull out setupTestVariationConfigEntriesAndSnapshot in proxycfg ... This allows us to reuse the same variations for ingress gateway testing	5 years ago
Daniel Nephin	5fe7043439	agent/cache: Make all cache options RegisterOptions ... Previously the SupportsBlocking option was specified by a method on the type, and all the other options were specified from RegisterOptions. This change moves RegisterOptions to a method on the type, and moves SupportsBlocking into the options struct. Currently there are only 2 cache-types. So all cache-types can implement this method by embedding a struct with those predefined values. In the future if a cache type needs to be registered more than once with different options it can remove the embedded type and implement the method in a way that allows for paramaterization.	5 years ago
Kyle Havlovitz	e9e8c0e730	Ingress Gateways for TCP services (#7509) ... * Implements a simple, tcp ingress gateway workflow This adds a new type of gateway for allowing Ingress traffic into Connect from external services. Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>	5 years ago
Andy Lindeman	c1cb18c648	proxycfg: support path exposed with non-HTTP2 protocol (#7510) ... If a proxied service is a gRPC or HTTP2 service, but a path is exposed using the HTTP1 or TCP protocol, Envoy should not be configured with `http2ProtocolOptions` for the cluster backing the path. A situation where this comes up is a gRPC service whose healthcheck or metrics route (e.g. for Prometheus) is an HTTP1 service running on a different port. Previously, if these were exposed either using `Expose: { Checks: true }` or `Expose: { Paths: ... }`, Envoy would still be configured to communicate with the path over HTTP2, which would not work properly.	5 years ago
R.B. Boyer	6adad71125	wan federation via mesh gateways (#6884) ... This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.	5 years ago
Matt Keeler	dfb0177dbc	Testing updates to support namespaced testing of the agent/xds… (#7185) ... * Various testing updates to support namespaced testing of the agent/xds package * agent/proxycfg package updates to support better namespace testing	5 years ago
Matt Keeler	c09693e545	Updates to Config Entries and Connect for Namespaces (#7116)	5 years ago
Aestek	ba8fd8296f	Add support for dual stack IPv4/IPv6 network (#6640) ... * Use consts for well known tagged adress keys * Add ipv4 and ipv6 tagged addresses for node lan and wan * Add ipv4 and ipv6 tagged addresses for service lan and wan * Use IPv4 and IPv6 address in DNS	5 years ago
R.B. Boyer	97aa050c20	agent: allow mesh gateways to initialize even if there are no connect services registered yet (#6576) ... Fixes #6543 Also improved some of the proxycfg tests to cover snapshot validity better.	5 years ago
Freddy	fdd10dd8b8	Expose HTTP-based paths through Connect proxy (#6446) ... Fixes: #5396 This PR adds a proxy configuration stanza called expose. These flags register listeners in Connect sidecar proxies to allow requests to specific HTTP paths from outside of the node. This allows services to protect themselves by only listening on the loopback interface, while still accepting traffic from non Connect-enabled services. Under expose there is a boolean checks flag that would automatically expose all registered HTTP and gRPC check paths. This stanza also accepts a paths list to expose individual paths. The primary use case for this functionality would be to expose paths for third parties like Prometheus or the kubelet. Listeners for requests to exposed paths are be configured dynamically at run time. Any time a proxy, or check can be registered, a listener can also be created. In this initial implementation requests to these paths are not authenticated/encrypted.	5 years ago