* agent: configure server lastseen timestamp
Signed-off-by: Dan Bond <danbond@protonmail.com>
* use correct config
Signed-off-by: Dan Bond <danbond@protonmail.com>
* add comments
Signed-off-by: Dan Bond <danbond@protonmail.com>
* use default age in test golden data
Signed-off-by: Dan Bond <danbond@protonmail.com>
* add changelog
Signed-off-by: Dan Bond <danbond@protonmail.com>
* fix runtime test
Signed-off-by: Dan Bond <danbond@protonmail.com>
* agent: add server_metadata
Signed-off-by: Dan Bond <danbond@protonmail.com>
* update comments
Signed-off-by: Dan Bond <danbond@protonmail.com>
* correctly check if metadata file does not exist
Signed-off-by: Dan Bond <danbond@protonmail.com>
* follow instructions for adding new config
Signed-off-by: Dan Bond <danbond@protonmail.com>
* add comments
Signed-off-by: Dan Bond <danbond@protonmail.com>
* update comments
Signed-off-by: Dan Bond <danbond@protonmail.com>
* Update agent/agent.go
Co-authored-by: Dan Upton <daniel@floppy.co>
* agent/config: add validation for duration with min
Signed-off-by: Dan Bond <danbond@protonmail.com>
* docs: add new server_rejoin_age_max config definition
Signed-off-by: Dan Bond <danbond@protonmail.com>
* agent: add unit test for checking server last seen
Signed-off-by: Dan Bond <danbond@protonmail.com>
* agent: log continually for 60s before erroring
Signed-off-by: Dan Bond <danbond@protonmail.com>
* pr comments
Signed-off-by: Dan Bond <danbond@protonmail.com>
* remove unneeded todo
* agent: fix error message
Signed-off-by: Dan Bond <danbond@protonmail.com>
---------
Signed-off-by: Dan Bond <danbond@protonmail.com>
Co-authored-by: Dan Upton <daniel@floppy.co>
* Persist HCP management token from server config
We want to move away from injecting an initial management token into
Consul clusters linked to HCP. The reasoning is that by using a separate
class of token we can have more flexibility in terms of allowing HCP's
token to co-exist with the user's management token.
Down the line we can also more easily adjust the permissions attached to
HCP's token to limit it's scope.
With these changes, the cloud management token is like the initial
management token in that iit has the same global management policy and
if it is created it effectively bootstraps the ACL system.
* Update SDK and mock HCP server
The HCP management token will now be sent in a special field rather than
as Consul's "initial management" token configuration.
This commit also updates the mock HCP server to more accurately reflect
the behavior of the CCM backend.
* Refactor HCP bootstrapping logic and add tests
We want to allow users to link Consul clusters that already exist to
HCP. Existing clusters need care when bootstrapped by HCP, since we do
not want to do things like change ACL/TLS settings for a running
cluster.
Additional changes:
* Deconstruct MaybeBootstrap so that it can be tested. The HCP Go SDK
requires HTTPS to fetch a token from the Auth URL, even if the backend
server is mocked. By pulling the hcp.Client creation out we can modify
its TLS configuration in tests while keeping the secure behavior in
production code.
* Add light validation for data received/loaded.
* Sanitize initial_management token from received config, since HCP will
only ever use the CloudConfig.MangementToken.
* Add changelog entry
Receiving an "acl not found" error from an RPC in the agent cache and the
streaming/event components will cause any request loops to cease under the
assumption that they will never work again if the token was destroyed. This
prevents log spam (#14144, #9738).
Unfortunately due to things like:
- authz requests going to stale servers that may not have witnessed the token
creation yet
- authz requests in a secondary datacenter happening before the tokens get
replicated to that datacenter
- authz requests from a primary TO a secondary datacenter happening before the
tokens get replicated to that datacenter
The caller will get an "acl not found" *before* the token exists, rather than
just after. The machinery added above in the linked PRs will kick in and
prevent the request loop from looping around again once the tokens actually
exist.
For `consul-dataplane` usages, where xDS is served by the Consul servers
rather than the clients ultimately this is not a problem because in that
scenario the `agent/proxycfg` machinery is on-demand and launched by a new xDS
stream needing data for a specific service in the catalog. If the watching
goroutines are terminated it ripples down and terminates the xDS stream, which
CDP will eventually re-establish and restart everything.
For Consul client usages, the `agent/proxycfg` machinery is ahead-of-time
launched at service registration time (called "local" in some of the proxycfg
machinery) so when the xDS stream comes in the data is already ready to go. If
the watching goroutines terminate it should terminate the xDS stream, but
there's no mechanism to re-spawn the watching goroutines. If the xDS stream
reconnects it will see no `ConfigSnapshot` and will not get one again until
the client agent is restarted, or the service is re-registered with something
changed in it.
This PR fixes a few things in the machinery:
- there was an inadvertent deadlock in fetching snapshot from the proxycfg
machinery by xDS, such that when the watching goroutine terminated the
snapshots would never be fetched. This caused some of the xDS machinery to
get indefinitely paused and not finish the teardown properly.
- Every 30s we now attempt to re-insert all locally registered services into
the proxycfg machinery.
- When services are re-inserted into the proxycfg machinery we special case
"dead" ones such that we unilaterally replace them rather that doing that
conditionally.
* Stub proxycfg handler for API gateway
* Add Service Kind constants/handling for API Gateway
* Begin stubbing for SDS
* Add new Secret type to xDS order of operations
* Continue stubbing of SDS
* Iterate on proxycfg handler for API gateway
* Handle BoundAPIGateway config entry subscription in proxycfg-glue
* Add API gateway to config snapshot validation
* Add API gateway to config snapshot clone, leaf, etc.
* Subscribe to bound route + cert config entries on bound-api-gateway
* Track routes + certs on API gateway config snapshot
* Generate DeepCopy() for types used in watch.Map
* Watch all active references on api-gateway, unwatch inactive
* Track loading of initial bound-api-gateway config entry
* Use proper proto package for SDS mapping
* Use ResourceReference instead of ServiceName, collect resources
* Fix typo, add + remove TODOs
* Watch discovery chains for TCPRoute
* Add TODO for updating gateway services for api-gateway
* make proto
* Regenerate deep-copy for proxycfg
* Set datacenter on upstream ID from query source
* Watch discovery chains for http-route service backends
* Add ServiceName getter to HTTP+TCP Service structs
* Clean up unwatched discovery chains on API Gateway
* Implement watch for ingress leaf certificate
* Collect upstreams on http-route + tcp-route updates
* Remove unused GatewayServices update handler
* Remove unnecessary gateway services logic for API Gateway
* Remove outdate TODO
* Use .ToIngress where appropriate, including TODO for cleaning up
* Cancel before returning error
* Remove GatewayServices subscription
* Add godoc for handlerAPIGateway functions
* Update terminology from Connect => Consul Service Mesh
Consistent with terminology changes in https://github.com/hashicorp/consul/pull/12690
* Add missing TODO
* Remove duplicate switch case
* Rerun deep-copy generator
* Use correct property on config snapshot
* Remove unnecessary leaf cert watch
* Clean up based on code review feedback
* Note handler properties that are initialized but set elsewhere
* Add TODO for moving helper func into structs pkg
* Update generated DeepCopy code
* gofmt
* Generate DeepCopy() for API gateway listener types
* Improve variable name
* Regenerate DeepCopy() code
* Fix linting issue
* Temporarily remove the secret type from resource generation
* server: add placeholder glue for rate limit handler
This commit adds a no-op implementation of the rate-limit handler and
adds it to the `consul.Server` struct and setup code.
This allows us to start working on the net/rpc and gRPC interceptors and
config logic.
* Add handler errors
* Set the global read and write limits
* fixing multilimiter moving packages
* Fix typo
* Simplify globalLimit usage
* add multilimiter and tests
* exporting LimitedEntity
* Apply suggestions from code review
Co-authored-by: John Murret <john.murret@hashicorp.com>
* add config update and rename config params
* add doc string and split config
* Apply suggestions from code review
Co-authored-by: Dan Upton <daniel@floppy.co>
* use timer to avoid go routine leak and change the interface
* add comments to tests
* fix failing test
* add prefix with config edge, refactor tests
* Apply suggestions from code review
Co-authored-by: Dan Upton <daniel@floppy.co>
* refactor to apply configs for limiters under a prefix
* add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic
* make KeyType an exported type
* split the config and limiter trees to fix race conditions in config update
* rename variables
* fix race in test and remove dead code
* fix reconcile loop to not create a timer on each loop
* add extra benchmark tests and fix tests
* fix benchmark test to pass value to func
* server: add placeholder glue for rate limit handler
This commit adds a no-op implementation of the rate-limit handler and
adds it to the `consul.Server` struct and setup code.
This allows us to start working on the net/rpc and gRPC interceptors and
config logic.
* Set the global read and write limits
* fixing multilimiter moving packages
* add server configuration for global rate limiting.
* remove agent test
* remove added stuff from handler
* remove added stuff from multilimiter
* removing unnecessary TODOs
* Removing TODO comment from handler
* adding in defaulting to infinite
* add disabled status in there
* adding in documentation for disabled mode.
* make disabled the default.
* Add mock and agent test
* addig documentation and missing mock file.
* Fixing test TestLoad_IntegrationWithFlags
* updating docs based on PR feedback.
* Updating Request Limits mode to use int based on PR feedback.
* Adding RequestLimits struct so we have a nested struct in ReloadableConfig.
* fixing linting references
* Update agent/consul/rate/handler.go
Co-authored-by: Dan Upton <daniel@floppy.co>
* Update agent/consul/config.go
Co-authored-by: Dan Upton <daniel@floppy.co>
* removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf
* added conversion function to convert request limits object to handler config.
* Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well.
* Updating values for TestLoad_FullConfig() so that they were different and discernable.
* Updating TestRuntimeConfig_Sanitize
* Fixing TestLoad_IntegrationWithFlags test
* putting nil check in place
* fixing rebase
* removing change for missing error checks. will put in another PR
* Rebasing after default multilimiter config change
* resolving rebase issues
* updating reference for incomingRPCLimiter to use interface
* updating interface
* Updating interfaces
* Fixing mock reference
Co-authored-by: Daniel Upton <daniel@floppy.co>
Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
* auto-config: relax node name validation for JWT authorization
This changes the JWT authorization logic to allow all non-whitespace,
non-quote characters when validating node names. Consul had previously
allowed these characters in node names, until this validation was added
to fix a security vulnerability with whitespace/quotes being passed to
the `bexpr` library. This unintentionally broke node names with
characters like `.` which aren't related to this vulnerability.
* Update website/content/docs/agent/config/cli-flags.mdx
Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com>
Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com>
Prevent serving TLS via ports.grpc
We remove the ability to run the ports.grpc in TLS mode to avoid
confusion and to simplify configuration. This breaking change
ensures that any user currently using ports.grpc in an encrypted
mode will receive an error message indicating that ports.grpc_tls
must be explicitly used.
The suggested action for these users is to simply swap their ports.grpc
to ports.grpc_tls in the configuration file. If both ports are defined,
or if the user has not configured TLS for grpc, then the error message
will not be printed.
* update go version to 1.18 for api and sdk, go mod tidy
* removes ioutil usage everywhere which was deprecated in go1.16 in favour of io and os packages. Also introduces a lint rule which forbids use of ioutil going forward.
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
Fix an issue where rpc_hold_timeout was being used as the timeout for non-blocking queries. Users should be able to tune read timeouts without fiddling with rpc_hold_timeout. A new configuration `rpc_read_timeout` is created.
Refactor some implementation from the original PR 11500 to remove the misleading linkage between RPCInfo's timeout (used to retry in case of certain modes of failures) and the client RPC timeouts.
Adds a user-configurable rate limiter to proxycfg snapshot delivery,
with a default limit of 250 updates per second.
This addresses a problem observed in our load testing of Consul
Dataplane where updating a "global" resource such as a wildcard
intention or the proxy-defaults config entry could starve the Raft or
Memberlist goroutines of CPU time, causing general cluster instability.
Preivously the TLS configurator would default to presenting auto TLS
certificates as client certificates.
Server agents should not have this behavior and should instead present
the manually configured certs. The autoTLS certs for servers are
exclusively used for peering and should not be used as the default for
outbound communication.
To ease the transition for users, the original gRPC
port can still operate in a deprecated mode as either
plain-text or TLS mode. This behavior should be removed
in a future release whenever we no longer support this.
The resulting behavior from this commit is:
`ports.grpc > 0 && ports.grpc_tls > 0` spawns both plain-text and tls ports.
`ports.grpc > 0 && grpc.tls == undefined` spawns a single plain-text port.
`ports.grpc > 0 && grpc.tls != undefined` spawns a single tls port (backwards compat mode).
- Introduce a new telemetry configurable parameter retry_failed_connection. User can set the value to true to let consul agent continue its start process on failed connection to datadog server. When set to false, agent will stop on failed start. The default behavior is true.
Co-authored-by: Dan Upton <daniel@floppy.co>
Co-authored-by: Evan Culver <eculver@users.noreply.github.com>
Changes to how the version string was handled created small regression with the release of consul 1.12.0 enterprise.
Many tools use the Config:Version field reported by the agent/self resource to determine whether Consul is an enterprise or OSS instance, expect something like 1.12.0+ent for enterprise and simply 1.12.0 for OSS. This was accidentally broken during the runup to 1.12.x
This work fixes the value returned by both the self endpoint in ["Config"]["Version"] and the metrics consul.version field.
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
* Support vault namespaces in connect CA
Follow on to some missed items from #12655
From an internal ticket "Support standard "Vault namespace in the
path" semantics for Connect Vault CA Provider"
Vault allows the namespace to be specified as a prefix in the path of
a PKI definition, but our usage of the Vault API includes calls that
don't support a namespaced key. In particular the sys.* family of
calls simply appends the key, instead of prefixing the namespace in
front of the path.
Unfortunately it is difficult to reliably parse a path with a
namespace; only vault knows what namespaces are present, and the '/'
separator can be inside a key name, as well as separating path
elements. This is in use in the wild; for example
'dc1/intermediate-key' is a relatively common naming schema.
Instead we add two new fields: RootPKINamespace and
IntermediatePKINamespace, which are the absolute namespace paths
'prefixed' in front of the respective PKI Paths.
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
* add config watcher to the config package
* add logging to watcher
* add test and refactor to add WatcherEvent.
* add all API calls and fix a bug with recreated files
* add tests for watcher
* remove the unnecessary use of context
* Add debug log and a test for file rename
* use inode to detect if the file is recreated/replaced and only listen to create events.
* tidy ups (#1535)
* tidy ups
* Add tests for inode reconcile
* fix linux vs windows syscall
* fix linux vs windows syscall
* fix windows compile error
* increase timeout
* use ctime ID
* remove remove/creation test as it's a use case that fail in linux
* fix linux/windows to use Ino/CreationTime
* fix the watcher to only overwrite current file id
* fix linter error
* fix remove/create test
* set reconcile loop to 200 Milliseconds
* fix watcher to not trigger event on remove, add more tests
* on a remove event try to add the file back to the watcher and trigger the handler if success
* fix race condition
* fix flaky test
* fix race conditions
* set level to info
* fix when file is removed and get an event for it after
* fix to trigger handler when we get a remove but re-add fail
* fix error message
* add tests for directory watch and fixes
* detect if a file is a symlink and return an error on Add
* rename Watcher to FileWatcher and remove symlink deref
* add fsnotify@v1.5.1
* fix go mod
* do not reset timer on errors, rename OS specific files
* rename New func
* events trigger on write and rename
* add missing test
* fix flaking tests
* fix flaky test
* check reconcile when removed
* delete invalid file
* fix test to create files with different mod time.
* back date file instead of sleeping
* add watching file in agent command.
* fix watcher call to use new API
* add configuration and stop watcher when server stop
* add certs as watched files
* move FileWatcher to the agent start instead of the command code
* stop watcher before replacing it
* save watched files in agent
* add add and remove interfaces to the file watcher
* fix remove to not return an error
* use `Add` and `Remove` to update certs files
* fix tests
* close events channel on the file watcher even when the context is done
* extract `NotAutoReloadableRuntimeConfig` is a separate struct
* fix linter errors
* add Ca configs and outgoing verify to the not auto reloadable config
* add some logs and fix to use background context
* add tests to auto-config reload
* remove stale test
* add tests to changes to config files
* add check to see if old cert files still trigger updates
* rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig`
* fix to re add both key and cert file. Add test to cover this case.
* review suggestion
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* add check to static runtime config changes
* fix test
* add changelog file
* fix review comments
* Apply suggestions from code review
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* update flag description
Co-authored-by: FFMMM <FFMMM@users.noreply.github.com>
* fix compilation error
* add static runtime config support
* fix test
* fix review comments
* fix log test
* Update .changelog/12329.txt
Co-authored-by: Dan Upton <daniel@floppy.co>
* transfer tests to runtime_test.go
* fix filewatcher Replace to not deadlock.
* avoid having lingering locks
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* split ReloadConfig func
* fix warning message
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* convert `FileWatcher` into an interface
* fix compilation errors
* fix tests
* extract func for adding and removing files
* add a coalesceTimer with a very small timer
* extract coaelsce Timer and add a shim for testing
* add tests to coalesceTimer fix to send remaining events
* set `coalesceTimer` to 1 Second
* support symlink, fix a nil deref.
* fix compile error
* fix compile error
* refactor file watcher rate limiting to be a Watcher implementation
* fix linter issue
* fix runtime config
* fix runtime test
* fix flaky tests
* fix compile error
* Apply suggestions from code review
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* fix agent New to return an error if File watcher New return an error
* quit timer loop if ctx is canceled
* Apply suggestions from code review
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com>
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
Co-authored-by: FFMMM <FFMMM@users.noreply.github.com>
Co-authored-by: Daniel Upton <daniel@floppy.co>
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
* add config watcher to the config package
* add logging to watcher
* add test and refactor to add WatcherEvent.
* add all API calls and fix a bug with recreated files
* add tests for watcher
* remove the unnecessary use of context
* Add debug log and a test for file rename
* use inode to detect if the file is recreated/replaced and only listen to create events.
* tidy ups (#1535)
* tidy ups
* Add tests for inode reconcile
* fix linux vs windows syscall
* fix linux vs windows syscall
* fix windows compile error
* increase timeout
* use ctime ID
* remove remove/creation test as it's a use case that fail in linux
* fix linux/windows to use Ino/CreationTime
* fix the watcher to only overwrite current file id
* fix linter error
* fix remove/create test
* set reconcile loop to 200 Milliseconds
* fix watcher to not trigger event on remove, add more tests
* on a remove event try to add the file back to the watcher and trigger the handler if success
* fix race condition
* fix flaky test
* fix race conditions
* set level to info
* fix when file is removed and get an event for it after
* fix to trigger handler when we get a remove but re-add fail
* fix error message
* add tests for directory watch and fixes
* detect if a file is a symlink and return an error on Add
* rename Watcher to FileWatcher and remove symlink deref
* add fsnotify@v1.5.1
* fix go mod
* do not reset timer on errors, rename OS specific files
* rename New func
* events trigger on write and rename
* add missing test
* fix flaking tests
* fix flaky test
* check reconcile when removed
* delete invalid file
* fix test to create files with different mod time.
* back date file instead of sleeping
* add watching file in agent command.
* fix watcher call to use new API
* add configuration and stop watcher when server stop
* add certs as watched files
* move FileWatcher to the agent start instead of the command code
* stop watcher before replacing it
* save watched files in agent
* add add and remove interfaces to the file watcher
* fix remove to not return an error
* use `Add` and `Remove` to update certs files
* fix tests
* close events channel on the file watcher even when the context is done
* extract `NotAutoReloadableRuntimeConfig` is a separate struct
* fix linter errors
* add Ca configs and outgoing verify to the not auto reloadable config
* add some logs and fix to use background context
* add tests to auto-config reload
* remove stale test
* add tests to changes to config files
* add check to see if old cert files still trigger updates
* rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig`
* fix to re add both key and cert file. Add test to cover this case.
* review suggestion
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* add check to static runtime config changes
* fix test
* add changelog file
* fix review comments
* Apply suggestions from code review
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* update flag description
Co-authored-by: FFMMM <FFMMM@users.noreply.github.com>
* fix compilation error
* add static runtime config support
* fix test
* fix review comments
* fix log test
* Update .changelog/12329.txt
Co-authored-by: Dan Upton <daniel@floppy.co>
* transfer tests to runtime_test.go
* fix filewatcher Replace to not deadlock.
* avoid having lingering locks
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* split ReloadConfig func
* fix warning message
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* convert `FileWatcher` into an interface
* fix compilation errors
* fix tests
* extract func for adding and removing files
Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com>
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
Co-authored-by: FFMMM <FFMMM@users.noreply.github.com>
Co-authored-by: Daniel Upton <daniel@floppy.co>
Eric Haberkorn