* Add %panel CSS component
* Deprecate old menu-panel component
* Various smallish tweaks to disclosure-menu
* Move all menus in the app chrome to use new DisclosureMenu
* Follow up CSS to move all app chrome menus to new components
* Don't prevent default any events from anchors
* Add a tick to click steps
We need a way to load certain CSS based on the environment you are viewing, i.e. we have debug CSS that we use for our Eng Documentation and various other DX utilities that shouldn't be compiled into our production or test builds.
Previously we would compile two entirely different CSS files (app and debug) and the load one or the other depending on which environment you were in.
This approach just empties out the debug.css file in certain environments (prod/test) which means we can just import that file from app. When in staging/development this imports the contents of debug.css (quite a bit of CSS) whereas when building for production/test this debug.css is emptied out during the build process.
There is a slight little hack in order to have this work, we import _debug.scss which imports the debug.scss file. I couldn't for the life of me figure out how to have broccoli empty out a file during the build process, so instead we essentially copy over debug.scss during dev and create an empty file during prod to _debug.scss.
When using make build to build an artifact for production CSS remains at ~58kb (during dev its a lot bigger than this)
* Add `is` and `test` helpers in a similar vein to `can`
Adds 2 new helpers in a similar vein to ember-cans can:
- `is` allows you to use vocab/phrases such as (is "something model") which calls isSomething() on the models ability.
- `test` allows you to use vocab/phrases such as (test "is something model") or (test "can something model")which calls isSomething() / canSomething() on the models ability. Mostly using the is helper and the can helper. It's basically the is/can helper combined.
* Adds TextInput component + related modifiers/helpers/machines/services (#11189)
Adds a few new components/modifiers/helpers to aid building forms.
- state-chart helper, used in lieu of a more generic approach for requiring our statecharts.
- A few modifications to our existing disabled modifier.
- A new 'validation' modifier, a super small form validation approach built to make use of state charts (optionally). Eventually we should be able to replace our current validation approach (ember-changeset-validations + extra deps) with this.
- A new TextInput component, which is the first of our new components specifically to make it easy to build forms with validations. This is still a WIP, I left some comments in pointing out where this one would be progressed, but as we don't need the planned functionality yet, I left it where it was. All of this will be fleshed out more at a later date.
Documentation is included for all of ^
* ui: Adds initial CRUD for partitions (#11190)
Adds basic CRUD support for partitions. Engineering-wise probably the biggest takeaway here is that we needed to write very little javascript code to add this entire feature, and the little javascript we did need to write was very straightforwards. Everything is pretty much just HTML. Another note to make is that both ember-changeset and ember-data (model layer things) are now completely abstracted away from the view layer of the application.
New components:
- Consul::Partition::Form
- Consul::Partition::List
- Consul::Partition::Notifications
- Consul::Partition::SearchBar
- Consul::Partition::Selector
See additional documentation here for more details
New Route templates:
- index.hbs partition listing/searching/filtering
- edit.hbs partition editing and creation
Additionally:
There is some additional debug work here for better observability and to prevent any errors regarding our href-to usage when a dc is not available in our documentation site.
Our softDelete functionality has been DRYed out a little to be used across two repos.
isLinkable was removed from our ListCollection component for lists like upstream and service listing, and instead use our new is helper from within the ListCollection, meaning we've added a few more lighterweight templateOnly components.
* ui: Exclude all debug-like files from the build (#11211)
This PR adds **/*-debug.* to our test/prod excluded files (realised I needed to add test-support.js also so added that here as its more or less the same thing). Conditionally juggling ES6 static imports (specifically debug ones) for this was also getting a little hairy, so I moved it all to use the same approach as our conditional routes. All in all it brings the vendor build back down to ~430kb gzipped.
From an engineers perspective, whenever specifying colors from now on we should use the form:
```
color: rgb(var(--tone-red-500));
```
Please note:
- Use rgb. This lets us do this like rgb(var(--tone-red-500) / 10%) so we can use a 10% opacity red-500 if we ever need to whilst still making use of our color tokens.
- Use --tone-colorName-000 (so the prefix tone). Previously we could use a mix of --gray-500: $gray-500 (note the left hand CSS prop and right hand SASS var) for the things we need to theme currently. As we no longer use SASS we can't do --gray-500: --gray-500, so we now do --tone-gray-500: --gray-500.
Just for clarity after that, whenever specifying a color anywhere, use rgb and --tone. There is only one reason where you might not use tone, and that is if you never want a color to be affected by a theme (for example a background shadow probably always should use --black)
There are a 2 or 3 left for the code editor, plus our custom-query values
* Add Partition to all our models
* Add partitions into our serializers/fingerprinting
* Make some amends to a few adapters ready for partitions
* Amend blueprints to avoid linting error
* Update all our repositories to include partitions, also
Remove enabled/disable nspace repo and just use a nspace with
conditionals
* Ensure nspace and parition parameters always return '' no matter what
* Ensure data-sink finds the model properly
This will later be replaced by a @dataSink decorator but we are find
kicking that can down the road a little more
* Add all the new partition data layer
* Add a way to set the title of the page from inside the route
and make it accessibile via a route announcer
* Make the Consul Route the default/basic one
* Tweak nspace and partition abilities not to check the length
* Thread partition through all the components that need it
* Some ACL tweaks
* Move the entire app to use partitions
* Delete all the tests we no longer need
* Update some Unit tests to use partition
* Fix up KV title tests
* Fix up a few more acceptance tests
* Fixup and temporarily ignore some acceptance tests
* Stop using ember-cli-page-objects fillable as it doesn't seem to work
* Fix lint error
* Remove old ACL related test
* Add a tick after filling out forms
* Fix token warning modal
* Found some more places where we need a partition var
* Fixup some more acceptance tests
* Tokens still needs a repo service for CRUD
* Remove acceptance tests we no longer need
* Fixup and "FIXME ignore" a few tests
* Remove an s
* Disable blocking queries for KV to revert to previous release for now
* Fixup adapter tests to follow async/function resolving interface
* Fixup all the serializer integration tests
* Fixup service/repo integration tests
* Fixup deleting acceptance test
* Fixup some ent tests
* Make sure nspaces passes the dc through for when thats important
* ...aaaand acceptance nspaces with the extra dc param
* ui: Standardize logo naming
According to structure it should always be logo-name not name-logo
* Make sure all our logos use logo-name format
* Upgrade to @hashicorp/structure-icons 1.9.0
* Add `-color` to be consistent with other logos
* Add ms logo back in
* Remove all the old `*-color` icons from before when we got masks
* Add missing files
* Missed glimmer extend name change
This commit uses docfy to isolate the individual parts and options and investigates the why you might use certain options and document how you might use certain options.
Originally we used a single %icon-definition CSS component to represent this, but seeing as some of them don't have icons, it didn't seem like the best name. So this PR splits this component into various different ones and then uses the new ones to continue to provide a now deprecated %icon-definition.
The component is currently a CSS only component that assumes a single (or multiple) description lists for its markup component, and provides for multiple different options (including a reversed mode which I'm still not totally sure about, but we don't use this right now anyway).
- %icon-definition
- %horizontal-kv-list
- %csv-list
- %tag-list
- %badge
* ui: change coloring of secondary navigation elements
* Remove top border, this was probably from older designs/iterations
* ui: Move app-view styles into components also...
1. Remove dead %app-view-content-error
2. Remove TabNav border overwriting
* Bring into line with our 'project standard' class/attributes pattern
* Add docs for AppView
When the Consul serf health check is failing, this means that the health checks registered with the agent may no longer be correct. Therefore we show a notice to the user when we detect that the serf health check is failing both for the health check listing for nodes and for service instances.
There were a few little things we fixed up whilst we were here:
- We use our @replace decorator to replace an empty Type with serf in the model.
- We noticed that ServiceTags can be null, so we replace that with an empty array.
- We added docs for both our Notice component and the Consul::HealthCheck::List component. Notice now defaults to @type=info.
* ui: Loader amends/improvements
1. Create a JS compatible template only 'glimmer' component so we can
use it with or without glimmer.
2. Add a set of `rose` colors.
3. Animate the brand loader to keep it centered when the side
navigation appears.
4. Tweak the color of Consul::Loader to use a 'rose' color.
5. Move everything loader related to the `app/components/` folder and
add docs.
* ui: Fix text search for upstream instances
* Clean up predicates for other model types
* Add some docs around DataCollection and searching
* Enable UI Engineering Docs for our preview sites
* Use debug CSS in dev and staging
* Update header logo and inline icon
* Update full logos + layout on loading screen
* Update favicon assets and strategy
- Switches to serve an ico file alongside an SVG file
- Introduces an apple-touch-icon
* Removes unused favicon/meta assets
* Changelog item for ui
* Create component for logo
* Simplify logo component, set brand color
* Fix docs loading state CSS issue
This PR removes storybook and adds docfy and uses docfy to render our existing README files.
This now means we can keep adding README documentation without committing any specific format or framework. If we eventually move to storybook then fine, or if we just want to remove docfy for whatever reason then fine - we will still have a full set of README files viewable via GitHub.
Michael Klein