`property-override` is an extension that allows for arbitrarily
patching Envoy resources based on resource matching filters. Patch
operations resemble a subset of the JSON Patch spec with minor
differences to facilitate patching pre-defined (protobuf) schemas.
See Envoy Extension product documentation for more details.
Co-authored-by: Eric Haberkorn <eric.haberkorn@hashicorp.com>
Co-authored-by: Kyle Havlovitz <kyle@hashicorp.com>
* perf: Remove expensive reflection from raft/mesh hot path
Replaces a reflection-based copy of a struct in the mesh topology with a
deep-copy generated implementation.
This is in the hot-path of raft FSM updates, and the reflection overhead was a
substantial part of mesh registration times (~90%). This could manifest as raft
thread saturation, and resulting instability.
Co-authored-by: Joel Brandhorst <joel.brandhorst@gmail.com>
* add changelog
---------
Co-authored-by: Joel Brandhorst <joel.brandhorst@gmail.com>
Co-authored-by: John Murret <john.murret@hashicorp.com>
This will likely happen frequently with sameness groups. Relaxing this
constraint is harmless for failover because xds/endpoints exludes cross
partition and peer endpoints.
* xds generation for routes api gateway
* Update gateway.go
* move buildHttpRoute into xds package
* Update agent/consul/discoverychain/gateway.go
* remove unneeded function
* convert http route code to only run for http protocol to future proof code path
* Update agent/consul/discoverychain/gateway.go
Co-authored-by: Mike Morris <mikemorris@users.noreply.github.com>
* fix tests, clean up http check logic
* clean up todo
* Fix casing in docstring
* Fix import block, adjust docstrings
* Rename func
* Consolidate docstring onto single line
* Remove ToIngress() conversion for APIGW, which generates its own xDS now
* update name and comment
* use constant value
* use constant
* rename readyUpstreams to readyListeners to better communicate what that function is doing
---------
Co-authored-by: Mike Morris <mikemorris@users.noreply.github.com>
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* xds generation for routes api gateway
* Update gateway.go
* move buildHttpRoute into xds package
* Update agent/consul/discoverychain/gateway.go
* remove unneeded function
* convert http route code to only run for http protocol to future proof code path
* Update agent/consul/discoverychain/gateway.go
Co-authored-by: Mike Morris <mikemorris@users.noreply.github.com>
* fix tests, clean up http check logic
* clean up todo
* Fix casing in docstring
* Fix import block, adjust docstrings
* update name and comment
* use constant value
* use constant
---------
Co-authored-by: Mike Morris <mikemorris@users.noreply.github.com>
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
Fix ACL check on health endpoint
Prior to this change, the service health API would not explicitly return an
error whenever a token with invalid permissions was given, and it would instead
return empty results. With this change, a "Permission denied" error is returned
whenever data is queried. This is done to better support the agent cache, which
performs a fetch backoff sleep whenever ACL errors are encountered. Affected
endpoints are: `/v1/health/connect/` and `/v1/health/ingress/`.
* Fix namespaced peer service updates / deletes.
This change fixes a function so that namespaced services are
correctly queried when handling updates / deletes. Prior to this
change, some peered services would not correctly be un-exported.
* Add changelog.
To avoid unintended tampering with remote downstreams via service
config, refactor BasicEnvoyExtender and RuntimeConfig to disallow
typical Envoy extensions from being applied to non-local proxies.
Continue to allow this behavior for AWS Lambda and the read-only
Validate builtin extensions.
Addresses CVE-2023-2816.
* API Gateway XDS Primitives, endpoints and clusters (#17002)
* XDS primitive generation for endpoints and clusters
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* server_test
* deleted extra file
* add missing parents to test
---------
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* Routes for API Gateway (#17158)
* XDS primitive generation for endpoints and clusters
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* server_test
* deleted extra file
* add missing parents to test
* checkpoint
* delete extra file
* httproute flattening code
* linting issue
* so close on this, calling for tonight
* unit test passing
* add in header manip to virtual host
* upstream rebuild commented out
* Use consistent upstream name whether or not we're rebuilding
* Start working through route naming logic
* Fix typos in test descriptions
* Simplify route naming logic
* Simplify RebuildHTTPRouteUpstream
* Merge additional compiled discovery chains instead of overwriting
* Use correct chain for flattened route, clean up + add TODOs
* Remove empty conditional branch
* Restore previous variable declaration
Limit the scope of this PR
* Clean up, improve TODO
* add logging, clean up todos
* clean up function
---------
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* checkpoint, skeleton, tests not passing
* checkpoint
* endpoints xds cluster configuration
* resources test fix
* fix reversion in resources_test
* checkpoint
* Update agent/proxycfg/api_gateway.go
Co-authored-by: John Maguire <john.maguire@hashicorp.com>
* unit tests passing
* gofmt
* add deterministic sorting to appease the unit test gods
* remove panic
* Find ready upstream matching listener instead of first in list
* Clean up, improve TODO
* Modify getReadyUpstreams to filter upstreams by listener (#17410)
Each listener would previously have all upstreams from any route that bound to the listener. This is problematic when a route bound to one listener also binds to other listeners and so includes upstreams for multiple listeners. The list for a given listener would then wind up including upstreams for other listeners.
* clean up todos, references to api gateway in listeners_ingress
* merge in Nathan's fix
* Update agent/consul/discoverychain/gateway.go
* cleanup current todos, remove snapshot manipulation from generation code
* Update agent/structs/config_entry_gateways.go
Co-authored-by: Thomas Eckert <teckert@hashicorp.com>
* Update agent/consul/discoverychain/gateway.go
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* Update agent/consul/discoverychain/gateway.go
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* Update agent/proxycfg/snapshot.go
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* clarified header comment for FlattenHTTPRoute, changed RebuildHTTPRouteUpstream to BuildHTTPRouteUpstream
* simplify cert logic
* Delete scratch
* revert route related changes in listener PR
* Update agent/consul/discoverychain/gateway.go
* Update agent/proxycfg/snapshot.go
* clean up uneeded extra lines in endpoints
---------
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
Co-authored-by: John Maguire <john.maguire@hashicorp.com>
Co-authored-by: Thomas Eckert <teckert@hashicorp.com>
* endpoints xds cluster configuration
* clusters xds native generation
* resources test fix
* fix reversion in resources_test
* Update agent/proxycfg/api_gateway.go
Co-authored-by: John Maguire <john.maguire@hashicorp.com>
* gofmt
* Modify getReadyUpstreams to filter upstreams by listener (#17410)
Each listener would previously have all upstreams from any route that bound to the listener. This is problematic when a route bound to one listener also binds to other listeners and so includes upstreams for multiple listeners. The list for a given listener would then wind up including upstreams for other listeners.
* Update agent/proxycfg/api_gateway.go
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* Restore import blocking
* Undo removal of unrelated code
---------
Co-authored-by: John Maguire <john.maguire@hashicorp.com>
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
This change enables workflows where you are reapplying a resource that should have an owner ref to publish modifications to the resources data without performing a read to figure out the current owner resource incarnations UID.
Basically we want workflows similar to `kubectl apply` or `consul config write` to be able to work seamlessly even for owned resources.
In these cases the users intention is to have the resource owned by the “current” incarnation of the owner resource.
* endpoints xds cluster configuration
* resources test fix
* fix reversion in resources_test
* Update agent/proxycfg/api_gateway.go
Co-authored-by: John Maguire <john.maguire@hashicorp.com>
* gofmt
* Modify getReadyUpstreams to filter upstreams by listener (#17410)
Each listener would previously have all upstreams from any route that bound to the listener. This is problematic when a route bound to one listener also binds to other listeners and so includes upstreams for multiple listeners. The list for a given listener would then wind up including upstreams for other listeners.
* Update agent/proxycfg/api_gateway.go
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* Restore import blocking
* Skip to next route if route has no upstreams
* cleanup
* change set from bool to empty struct
---------
Co-authored-by: John Maguire <john.maguire@hashicorp.com>
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* agent: configure server lastseen timestamp
Signed-off-by: Dan Bond <danbond@protonmail.com>
* use correct config
Signed-off-by: Dan Bond <danbond@protonmail.com>
* add comments
Signed-off-by: Dan Bond <danbond@protonmail.com>
* use default age in test golden data
Signed-off-by: Dan Bond <danbond@protonmail.com>
* add changelog
Signed-off-by: Dan Bond <danbond@protonmail.com>
* fix runtime test
Signed-off-by: Dan Bond <danbond@protonmail.com>
* agent: add server_metadata
Signed-off-by: Dan Bond <danbond@protonmail.com>
* update comments
Signed-off-by: Dan Bond <danbond@protonmail.com>
* correctly check if metadata file does not exist
Signed-off-by: Dan Bond <danbond@protonmail.com>
* follow instructions for adding new config
Signed-off-by: Dan Bond <danbond@protonmail.com>
* add comments
Signed-off-by: Dan Bond <danbond@protonmail.com>
* update comments
Signed-off-by: Dan Bond <danbond@protonmail.com>
* Update agent/agent.go
Co-authored-by: Dan Upton <daniel@floppy.co>
* agent/config: add validation for duration with min
Signed-off-by: Dan Bond <danbond@protonmail.com>
* docs: add new server_rejoin_age_max config definition
Signed-off-by: Dan Bond <danbond@protonmail.com>
* agent: add unit test for checking server last seen
Signed-off-by: Dan Bond <danbond@protonmail.com>
* agent: log continually for 60s before erroring
Signed-off-by: Dan Bond <danbond@protonmail.com>
* pr comments
Signed-off-by: Dan Bond <danbond@protonmail.com>
* remove unneeded todo
* agent: fix error message
Signed-off-by: Dan Bond <danbond@protonmail.com>
---------
Signed-off-by: Dan Bond <danbond@protonmail.com>
Co-authored-by: Dan Upton <daniel@floppy.co>
* Add v1/internal/service-virtual-ip for manually setting service VIPs
* Attach service virtual IP info to compiled discovery chain
* Separate auto-assigned and manual VIPs in response
The grpc resolver implementation is fed from changes to the
router.Router. Within the router there is a map of various areas storing
the addressing information for servers in those areas. All map entries
are of the WAN variety except a single special entry for the LAN.
Addressing information in the LAN "area" are local addresses intended
for use when making a client-to-server or server-to-server request.
The client agent correctly updates this LAN area when receiving lan serf
events, so by extension the grpc resolver works fine in that scenario.
The server agent only initially populates a single entry in the LAN area
(for itself) on startup, and then never mutates that area map again.
For normal RPCs a different structure is used for LAN routing.
Additionally when selecting a server to contact in the local datacenter
it will randomly select addresses from either the LAN or WAN addressed
entries in the map.
Unfortunately this means that the grpc resolver stack as it exists on
server agents is either broken or only accidentally functions by having
servers dial each other over the WAN-accessible address. If the operator
disables the serf wan port completely likely this incidental functioning
would break.
This PR enforces that local requests for servers (both for stale reads
or leader forwarded requests) exclusively use the LAN "area" information
and also fixes it so that servers keep that area up to date in the
router.
A test for the grpc resolver logic was added, as well as a higher level
full-stack test to ensure the externally perceived bug does not return.
* snapshot: some improvments to the snapshot process
Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com>
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
UNIX domain socket paths are limited to 104-108 characters, depending on
the OS. This limit was quite easy to exceed when testing the feature on
Kubernetes, due to how proxy IDs encode the Pod ID eg:
metrics-collector-59467bcb9b-fkkzl-hcp-metrics-collector-sidecar-proxy
To ensure we stay under that character limit this commit makes a
couple changes:
- Use a b64 encoded SHA1 hash of the namespace + proxy ID to create a
short and deterministic socket file name.
- Add validation to proxy registrations and proxy-defaults to enforce a
limit on the socket directory length.
Fix multiple issues related to proxycfg health queries.
1. The datacenter was not being provided to a proxycfg query, which resulted in
bypassing agentless query optimizations and using the normal API instead.
2. The health rpc endpoint would return a zero index when insufficient ACLs were
detected. This would result in the agent cache performing an infinite loop of
queries in rapid succession without backoff.
Fix issue with peer stream node cleanup.
This commit encompasses a few problems that are closely related due to their
proximity in the code.
1. The peerstream utilizes node IDs in several locations to determine which
nodes / services / checks should be cleaned up or created. While VM deployments
with agents will likely always have a node ID, agentless uses synthetic nodes
and does not populate the field. This means that for consul-k8s deployments, all
services were likely bundled together into the same synthetic node in some code
paths (but not all), resulting in strange behavior. The Node.Node field should
be used instead as a unique identifier, as it should always be populated.
2. The peerstream cleanup process for unused nodes uses an incorrect query for
node deregistration. This query is NOT namespace aware and results in the node
(and corresponding services) being deregistered prematurely whenever it has zero
default-namespace services and 1+ non-default-namespace services registered on
it. This issue is tricky to find due to the incorrect logic mentioned in #1,
combined with the fact that the affected services must be co-located on the same
node as the currently deregistering service for this to be encountered.
3. The stream tracker did not understand differences between services in
different namespaces and could therefore report incorrect numbers. It was
updated to utilize the full service name to avoid conflicts and return proper
results.
Michael Zalimeni