63 Commits (57096f8410d4fbf1a9c361404e20b6179cb305f1)

Author	SHA1	Message	Date
Freddy	b3ec383d04	Gateway Services Nodes UI Endpoint (#7685) ... The endpoint supports queries for both Ingress Gateways and Terminating Gateways. Used to display a gateway's linked services in the UI.	5 years ago
Chris Piraino	30792e933b	Add test for adding DNSSAN for ConnectCALeaf cache type	5 years ago
Kyle Havlovitz	f14c54e25e	Add TLS option and DNS SAN support to ingress config ... xds: Only set TLS context for ingress listener when requested	5 years ago
Freddy	137a2c32c6	TLS Origination for Terminating Gateways (#7671)	5 years ago
Daniel Nephin	5fe7043439	agent/cache: Make all cache options RegisterOptions ... Previously the SupportsBlocking option was specified by a method on the type, and all the other options were specified from RegisterOptions. This change moves RegisterOptions to a method on the type, and moves SupportsBlocking into the options struct. Currently there are only 2 cache-types. So all cache-types can implement this method by embedding a struct with those predefined values. In the future if a cache type needs to be registered more than once with different options it can remove the embedded type and implement the method in a way that allows for paramaterization.	5 years ago
Kyle Havlovitz	e9e8c0e730	Ingress Gateways for TCP services (#7509) ... * Implements a simple, tcp ingress gateway workflow This adds a new type of gateway for allowing Ingress traffic into Connect from external services. Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>	5 years ago
sasha	ac9b330f6b	add DNSSAN and IPSAN to cache key (#7597)	5 years ago
R.B. Boyer	6adad71125	wan federation via mesh gateways (#6884) ... This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.	5 years ago
Matt Keeler	e231d62bc9	Make the config entry and leaf cert cache types ns aware (#7256)	5 years ago
Anthony Scalisi	beb928f8de	fix spelling errors (#7135)	5 years ago
Matt Keeler	c09693e545	Updates to Config Entries and Connect for Namespaces (#7116)	5 years ago
Hans Hasselberg	87f32c8ba6	auto_encrypt: set dns and ip san for k8s and provide configuration (#6944) ... * Add CreateCSRWithSAN * Use CreateCSRWithSAN in auto_encrypt and cache * Copy DNSNames and IPAddresses to cert * Verify auto_encrypt.sign returns cert with SAN * provide configuration options for auto_encrypt dnssan and ipsan * rename CreateCSRWithSAN to CreateCSR	5 years ago
Matt Keeler	5934f803bf	Sync of OSS changes to support namespaces (#6909)	5 years ago
Todd Radel	54f92e2924	Make all Connect Cert Common Names valid FQDNs (#6423)	5 years ago
Paul Banks	87699eca2f	Fix support for RSA CA keys in Connect. (#6638) ... * Allow RSA CA certs for consul and vault providers to correctly sign EC leaf certs. * Ensure key type ad bits are populated from CA cert and clean up tests * Add integration test and fix error when initializing secondary CA with RSA key. * Add more tests, fix review feedback * Update docs with key type config and output * Apply suggestions from code review Co-Authored-By: R.B. Boyer <rb@hashicorp.com>	5 years ago
R.B. Boyer	c4b92d5534	connect: connect CA Roots in secondary datacenters should use a SigningKeyID derived from their local intermediate (#6513) ... This fixes an issue where leaf certificates issued in secondary datacenters would be reissued very frequently (every ~20 seconds) because the logic meant to detect root rotation was errantly triggering because a hash of the ultimate root (in the primary) was being compared against a hash of the local intermediate root (in the secondary) and always failing.	5 years ago
Freddy	fdd10dd8b8	Expose HTTP-based paths through Connect proxy (#6446) ... Fixes: #5396 This PR adds a proxy configuration stanza called expose. These flags register listeners in Connect sidecar proxies to allow requests to specific HTTP paths from outside of the node. This allows services to protect themselves by only listening on the loopback interface, while still accepting traffic from non Connect-enabled services. Under expose there is a boolean checks flag that would automatically expose all registered HTTP and gRPC check paths. This stanza also accepts a paths list to expose individual paths. The primary use case for this functionality would be to expose paths for third parties like Prometheus or the kubelet. Listeners for requests to exposed paths are be configured dynamically at run time. Any time a proxy, or check can be registered, a listener can also be created. In this initial implementation requests to these paths are not authenticated/encrypted.	5 years ago
R.B. Boyer	af01d397a5	connect: don't colon-hex-encode the AuthorityKeyId and SubjectKeyId fields in connect certs (#6492) ... The fields in the certs are meant to hold the original binary representation of this data, not some ascii-encoded version. The only time we should be colon-hex-encoding fields is for display purposes or marshaling through non-TLS mediums (like RPC).	5 years ago
R.B. Boyer	20eb0d3e94	cache: remove data race in agent cache ... In normal operations there is a read/write race related to request QueryOptions fields. An example race: WARNING: DATA RACE Read at 0x00c000836950 by goroutine 30: github.com/hashicorp/consul/agent/structs.(*ServiceConfigRequest).CacheInfo() /go/src/github.com/hashicorp/consul/agent/structs/config_entry.go:506 +0x109 github.com/hashicorp/consul/agent/cache.(*Cache).getWithIndex() /go/src/github.com/hashicorp/consul/agent/cache/cache.go:262 +0x5c github.com/hashicorp/consul/agent/cache.(*Cache).notifyBlockingQuery() /go/src/github.com/hashicorp/consul/agent/cache/watch.go:89 +0xd7 Previous write at 0x00c000836950 by goroutine 147: github.com/hashicorp/consul/agent/cache-types.(*ResolvedServiceConfig).Fetch() /go/src/github.com/hashicorp/consul/agent/cache-types/resolved_service_config.go:31 +0x219 github.com/hashicorp/consul/agent/cache.(*Cache).fetch.func1() /go/src/github.com/hashicorp/consul/agent/cache/cache.go:495 +0x112 This patch does a lightweight copy of the request struct so that the embedded QueryOptions fields that are mutated during Fetch() are scoped to just that one RPC.	5 years ago
Alvin Huang	c516fabfac	revert commits on master (#6413)	5 years ago
tradel	7f36a5b676	construct a common name for each CSR	5 years ago
R.B. Boyer	561b2fe606	connect: generate the full SNI names for discovery targets in the compiler rather than in the xds package (#6340)	5 years ago
R.B. Boyer	8e22d80e35	connect: fix failover through a mesh gateway to a remote datacenter (#6259) ... Failover is pushed entirely down to the data plane by creating envoy clusters and putting each successive destination in a different load assignment priority band. For example this shows that normally requests go to 1.2.3.4:8080 but when that fails they go to 6.7.8.9:8080: - name: foo load_assignment: cluster_name: foo policy: overprovisioning_factor: 100000 endpoints: - priority: 0 lb_endpoints: - endpoint: address: socket_address: address: 1.2.3.4 port_value: 8080 - priority: 1 lb_endpoints: - endpoint: address: socket_address: address: 6.7.8.9 port_value: 8080 Mesh gateways route requests based solely on the SNI header tacked onto the TLS layer. Envoy currently only lets you configure the outbound SNI header at the cluster layer. If you try to failover through a mesh gateway you ideally would configure the SNI value per endpoint, but that's not possible in envoy today. This PR introduces a simpler way around the problem for now: 1. We identify any target of failover that will use mesh gateway mode local or remote and then further isolate any resolver node in the compiled discovery chain that has a failover destination set to one of those targets. 2. For each of these resolvers we will perform a small measurement of comparative healths of the endpoints that come back from the health API for the set of primary target and serial failover targets. We walk the list of targets in order and if any endpoint is healthy we return that target, otherwise we move on to the next target. 3. The CDS and EDS endpoints both perform the measurements in (2) for the affected resolver nodes. 4. For CDS this measurement selects which TLS SNI field to use for the cluster (note the cluster is always going to be named for the primary target) 5. For EDS this measurement selects which set of endpoints will populate the cluster. Priority tiered failover is ignored. One of the big downsides to this approach to failover is that the failover detection and correction is going to be controlled by consul rather than deferring that entirely to the data plane as with the prior version. This also means that we are bound to only failover using official health signals and cannot make use of data plane signals like outlier detection to affect failover. In this specific scenario the lack of data plane signals is ok because the effectiveness is already muted by the fact that the ultimate destination endpoints will have their data plane signals scrambled when they pass through the mesh gateway wrapper anyway so we're not losing much. Another related fix is that we now use the endpoint health from the underlying service, not the health of the gateway (regardless of failover mode).	5 years ago
R.B. Boyer	c395affc93	connect: expose an API endpoint to compile the discovery chain (#6248) ... In addition to exposing compilation over the API cleaned up the structures that would be exchanged to be cleaner and easier to support and understand. Also removed ability to configure the envoy OverprovisioningFactor.	5 years ago
R.B. Boyer	6393edba53	connect: reconcile how upstream configuration works with discovery chains (#6225) ... * connect: reconcile how upstream configuration works with discovery chains The following upstream config fields for connect sidecars sanely integrate into discovery chain resolution: - Destination Namespace/Datacenter: Compilation occurs locally but using different default values for namespaces and datacenters. The xDS clusters that are created are named as they normally would be. - Mesh Gateway Mode (single upstream): If set this value overrides any value computed for any resolver for the entire discovery chain. The xDS clusters that are created may be named differently (see below). - Mesh Gateway Mode (whole sidecar): If set this value overrides any value computed for any resolver for the entire discovery chain. If this is specifically overridden for a single upstream this value is ignored in that case. The xDS clusters that are created may be named differently (see below). - Protocol (in opaque config): If set this value overrides the value computed when evaluating the entire discovery chain. If the normal chain would be TCP or if this override is set to TCP then the result is that we explicitly disable L7 Routing and Splitting. The xDS clusters that are created may be named differently (see below). - Connect Timeout (in opaque config): If set this value overrides the value for any resolver in the entire discovery chain. The xDS clusters that are created may be named differently (see below). If any of the above overrides affect the actual result of compiling the discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op override to "tcp") then the relevant parameters are hashed and provided to the xDS layer as a prefix for use in naming the Clusters. This is to ensure that if one Upstream discovery chain has no overrides and tangentially needs a cluster named "api.default.XXX", and another Upstream does have overrides for "api.default.XXX" that they won't cross-pollinate against the operator's wishes. Fixes #6159	5 years ago
Paul Banks	e87cef2bb8	Revert "connect: support AWS PCA as a CA provider" (#6251) ... This reverts commit 3497b7c00d.	5 years ago
Todd Radel	3497b7c00d	connect: support AWS PCA as a CA provider (#6189) ... Port AWS PCA provider from consul-ent	5 years ago
R.B. Boyer	e8132b61c0	add test for discovery chain agent cache-type (#6130)	5 years ago
Matt Keeler	3b6d5e382a	Implement caching for config entry lists ... Update agent/cache-types/config_entry.go Co-Authored-By: R.B. Boyer <public@richardboyer.net>	5 years ago
R.B. Boyer	4bdb690a25	activate most discovery chain features in xDS for envoy (#6024)	5 years ago
Matt Keeler	3943e38133	Implement Kind based ServiceDump and caching of the ServiceDump RPC	5 years ago
hashicorp-ci	43bda6fb76	Merge Consul OSS branch 'master' at commit e91f73f592	5 years ago
Hans Hasselberg	33a7df3330	tls: auto_encrypt enables automatic RPC cert provisioning for consul clients (#5597)	5 years ago
Matt Keeler	43c5ba0304	New Cache Types (#5995) ... * Add a cache type for the Catalog.ListServices endpoint * Add a cache type for the Catalog.ListDatacenters endpoint	6 years ago
Paul Banks	0cfb6051ea	Add integration test for central config; fix central config WIP (#5752) ... * Add integration test for central config; fix central config WIP * Add integration test for central config; fix central config WIP * Set proxy protocol correctly and begin adding upstream support * Add upstreams to service config cache key and start new notify watcher if they change. This doesn't update the tests to pass though. * Fix some merging logic get things working manually with a hack (TODO fix properly) * Simplification to not allow enabling sidecars centrally - it makes no sense without upstreams anyway * Test compile again and obvious ones pass. Lots of failures locally not debugged yet but may be flakes. Pushing up to see what CI does * Fix up service manageer and API test failures * Remove the enable command since it no longer makes much sense without being able to turn on sidecar proxies centrally * Remove version.go hack - will make integration test fail until release * Remove unused code from commands and upstream merge * Re-bump version to 1.5.0	6 years ago
Kyle Havlovitz	c269369760	Make central service config opt-in and rework the initial registration	6 years ago
Kyle Havlovitz	7c25869e67	Add the service registration manager to the agent	6 years ago
Jeff Mitchell	4243c3ae42	Move internal/ to sdk/ (#5568) ... * Move internal/ to sdk/ * Add a readme to the SDK folder	6 years ago
Jeff Mitchell	47c390025b	Convert to Go Modules (#5517) ... * First conversion * Use serf 0.8.2 tag and associated updated deps * * Move freeport and testutil into internal/ * Make internal/ its own module * Update imports * Add replace statements so API and normal Consul code are self-referencing for ease of development * Adapt to newer goe/values * Bump to new cleanhttp * Fix ban nonprintable chars test * Update lock bad args test The error message when the duration cannot be parsed changed in Go 1.12 (ae0c435877d3aacb9af5e706c40f9dddde5d3e67). This updates that test. * Update another test as well * Bump travis * Bump circleci * Bump go-discover and godo to get rid of launchpad dep * Bump dockerfile go version * fix tar command * Bump go-cleanhttp	6 years ago
R.B. Boyer	f4a3b9d518	fix typos reported by golangci-lint:misspell (#5434)	6 years ago
Aestek	f1cdfbe40e	Allow DNS interface to use agent cache (#5300) ... Adds two new configuration parameters "dns_config.use_cache" and "dns_config.cache_max_age" controlling how DNS requests use the agent cache when querying servers.	6 years ago
Paul Banks	ef9f27cbc8	connect: tame thundering herd of CSRs on CA rotation (#5228) ... * Support rate limiting and concurrency limiting CSR requests on servers; handle CA rotations gracefully with jitter and backoff-on-rate-limit in client * Add CSR rate limiting docs * Fix config naming and add tests for new CA configs	6 years ago
Matt Keeler	baa8946ea6	cache: Pass through wait query param to the cache.Get (#5203) ... This adds a MaxQueryTime field to the connect ca leaf cache request type and populates it via the wait query param. The cache will then do the right thing and timeout the operation as expected if no new leaf cert is available within that time. Fixes #4462 The reproduction scenario in the original issue now times out appropriately.	6 years ago
Paul Banks	0638e09b6e	connect: agent leaf cert caching improvements (#5091) ... * Add State storage and LastResult argument into Cache so that cache.Types can safely store additional data that is eventually expired. * New Leaf cache type working and basic tests passing. TODO: more extensive testing for the Root change jitter across blocking requests, test concurrent fetches for different leaves interact nicely with rootsWatcher. * Add multi-client and delayed rotation tests. * Typos and cleanup error handling in roots watch * Add comment about how the FetchResult can be used and change ca leaf state to use a non-pointer state. * Plumb test override of root CA jitter through TestAgent so that tests are deterministic again! * Fix failing config test	6 years ago
Paul Banks	b29bc906ee	bugfix: use ServiceTags to generate cache key hash (#4987) ... * bugfix: use ServiceTags to generate cahce key hash * update unit test * update * remote print log * Update .gitignore * Completely deprecate ServiceTag field internally for clarity * Add explicit test for CacheInfo cases	6 years ago
Paul Banks	c9217c958e	merge feedback: fix typos; actually use deliverLatest added previously but not plumbed in	6 years ago
Paul Banks	a28e4a33b2	Fix bug in leaf-cert cache type where multiple client tokens collide (#4736) ... * Fix bug in leaf-cert cache type where multiple clients with different tokens would share certs and block incorrectly * Use hash for issued certs key to avoid ambiguity concatenating	6 years ago
Paul Banks	88388d760d	Support Agent Caching for Service Discovery Results (#4541) ... * Add cache types for catalog/services and health/services and basic test that caching works * Support non-blocking cache types with Cache-Control semantics. * Update API docs to include caching info for every endpoint. * Comment updates per PR feedback. * Add note on caching to the 10,000 foot view on the architecture page to make the new data path more clear. * Document prepared query staleness quirk and force all background requests to AllowStale so we can spread service discovery load across servers.	6 years ago
Paul Banks	8cbeb29e73	Fixes #4421: General solution to stop blocking queries with index 0 (#4437) ... * Fix theoretical cache collision bug if/when we use more cache types with same result type * Generalized fix for blocking query handling when state store methods return zero index * Refactor test retry to only affect CI * Undo make file merge * Add hint to error message returned to end-user requests if Connect is not enabled when they try to request cert * Explicit error for Roots endpoint if connect is disabled * Fix tests that were asserting old behaviour	6 years ago
Paul Banks	43b48bc06b	Get agent cache tests passing without global hit count (which is racy). ... Few other fixes in here just to get a clean run locally - they are all also fixed in other PRs but shouldn't conflict. This should be robust to timing between goroutines now.	7 years ago