Commit Graph

48 Commits (560d410c6d52a23609ddf04d983d61c79a701c29)

Author SHA1 Message Date
freddygv 650e48624d Allow terminated peerings to be deleted
Peerings are terminated when a peer decides to delete the peering from
their end. Deleting a peering sends a termination message to the peer
and triggers them to mark the peering as terminated but does NOT delete
the peering itself. This is to prevent peerings from disappearing from
both sides just because one side deleted them.

Previously the Delete endpoint was skipping the deletion if the peering
was not marked as active. However, terminated peerings are also
inactive.

This PR makes some updates so that peerings marked as terminated can be
deleted by users.
2022-08-26 10:52:47 -06:00
Chris S. Kim 6ddcc04613
Replace ring buffer with async version (#14314)
We need to watch for changes to peerings and update the server addresses which get served by the ring buffer.

Also, if there is an active connection for a peer, we are getting up-to-date server addresses from the replication stream and can safely ignore the token's addresses which may be stale.
2022-08-26 10:27:13 -04:00
freddygv c04515a844 Use proto message for each secrets write op
Previously there was a field indicating the operation that triggered a
secrets write. Now there is a message for each operation and it contains
the secret ID being persisted.
2022-08-08 01:41:00 -06:00
freddygv 60d6e28c97 Pass explicit signal with op for secrets write
Previously the updates to the peering secrets UUID table relied on
inferring what action triggered the update based on a reconciliation
against the existing secrets.

Instead we now explicitly require the operation to be given so that the
inference isn't necessary. This makes the UUID table logic easier to
reason about and fixes some related bugs.

There is also an update so that the peering secrets get handled on
snapshots/restores.
2022-08-03 17:25:12 -05:00
freddygv 9ca687bc7c Avoid deleting peering secret UUIDs at dialers
Dialers do not keep track of peering secret UUIDs, so they should not
attempt to clean up data from that table when their peering is deleted.

We also now keep peer server addresses when marking peerings for
deletion. Peer server addresses are used by the ShouldDial() helper
when determining whether the peering is for a dialer or an acceptor.
We need to keep this data so that peering secrets can be cleaned up
accordingly.
2022-08-03 16:34:57 -05:00
Matt Keeler f74d0cef7a
Implement/Utilize secrets for Peering Replication Stream (#13977) 2022-08-01 10:33:18 -04:00
acpana 6033584349
use EqualPartitions
Signed-off-by: acpana <8968914+acpana@users.noreply.github.com>
2022-07-27 14:48:30 -07:00
acpana 0351ca5136
better fix
Signed-off-by: acpana <8968914+acpana@users.noreply.github.com>
2022-07-27 14:28:08 -07:00
acpana 8b2ef80336
sync w ent
Signed-off-by: acpana <8968914+acpana@users.noreply.github.com>
2022-07-27 11:41:39 -07:00
alex 437a28d18a
peering: prevent peering in same partition (#13851)
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
2022-07-25 18:00:48 -07:00
Luke Kysow 3530d3782d
peering: read endpoints can now return failing status (#13849)
Track streams that have been disconnected due to an error and
set their statuses to failing.
2022-07-25 14:27:53 -07:00
Chris S. Kim 73a84f256f
Preserve PeeringState on upsert (#13666)
Fixes a bug where if the generate token is called twice, the second call upserts the zero-value (undefined) of PeeringState.
2022-07-25 14:37:56 -04:00
freddygv b544ce6485 Add ACL enforcement to peering endpoints 2022-07-25 09:34:29 -06:00
alex 279d458e6e
peering: use ShouldDial to validate peer role (#13823)
Signed-off-by: acpana <8968914+acpana@users.noreply.github.com>
2022-07-22 15:56:25 -07:00
Luke Kysow a1e6d69454
peering: add config to enable/disable peering (#13867)
* peering: add config to enable/disable peering

Add config:

```
peering {
  enabled = true
}
```

Defaults to true. When disabled:
1. All peering RPC endpoints will return an error
2. Leader won't start its peering establishment goroutines
3. Leader won't start its peering deletion goroutines
2022-07-22 15:20:21 -07:00
Nitya Dhanushkodi f47319b7c6
update generate token endpoint to take external addresses (#13844)
Update generate token endpoint (rpc, http, and api module)

If ServerExternalAddresses are set, it will override any addresses gotten from the "consul" service, and be used in the token instead, and dialed by the dialer. This allows for setting up a load balancer for example, in front of the consul servers.
2022-07-21 14:56:11 -07:00
alex de5a991d8c
peering: refactor reconcile, cleanup (#13795)
Signed-off-by: acpana <8968914+acpana@users.noreply.github.com>
2022-07-19 11:43:29 -07:00
alex a9ae2ff4fa
peering: track exported services (#13784)
Signed-off-by: acpana <8968914+acpana@users.noreply.github.com>
2022-07-18 10:20:04 -07:00
alex adb5ffa1a6
peering: track imported services (#13718) 2022-07-15 10:20:43 -07:00
Dan Upton b9e525d689
grpc: rename public/private directories to external/internal (#13721)
Previously, public referred to gRPC services that are both exposed on
the dedicated gRPC port and have their definitions in the proto-public
directory (so were considered usable by 3rd parties). Whereas private
referred to services on the multiplexed server port that are only usable
by agents and other servers.

Now, we're splitting these definitions, such that external/internal
refers to the port and public/private refers to whether they can be used
by 3rd parties.

This is necessary because the peering replication API needs to be
exposed on the dedicated port, but is not (yet) suitable for use by 3rd
parties.
2022-07-13 16:33:48 +01:00
R.B. Boyer af04851637
peering: move peer replication to the external gRPC port (#13698)
Peer replication is intended to be between separate Consul installs and
effectively should be considered "external". This PR moves the peer
stream replication bidirectional RPC endpoint to the external gRPC
server and ensures that things continue to function.
2022-07-08 12:01:13 -05:00
Chris S. Kim f07132dacc
Revise possible states for a peering. (#13661)
These changes are primarily for Consul's UI, where we want to be more
specific about the state a peering is in.

- The "initial" state was renamed to pending, and no longer applies to
  peerings being established from a peering token.

- Upon request to establish a peering from a peering token, peerings
  will be set as "establishing". This will help distinguish between the
  two roles: the cluster that generates the peering token and the
  cluster that establishes the peering.

- When marked for deletion, peering state will be set to "deleting".
  This way the UI determines the deletion via the state rather than the
  "DeletedAt" field.

Co-authored-by: freddygv <freddy@hashicorp.com>
2022-07-04 10:47:58 -04:00
alex beb8b03e8a
peering: reconcile/ hint active state for list (#13619)
Signed-off-by: acpana <8968914+acpana@users.noreply.github.com>
2022-06-29 09:43:50 -07:00
R.B. Boyer 0fa828db76
peering: replicate all SpiffeID values necessary for the importing side to do SAN validation (#13612)
When traversing an exported peered service, the discovery chain
evaluation at the other side may re-route the request to a variety of
endpoints. Furthermore we intend to terminate mTLS at the mesh gateway
for arriving peered traffic that is http-like (L7), so the caller needs
to know the mesh gateway's SpiffeID in that case as well.

The following new SpiffeID values will be shipped back in the peerstream
replication:

- tcp: all possible SpiffeIDs resulting from the service-resolver
        component of the exported discovery chain

- http-like: the SpiffeID of the mesh gateway
2022-06-27 14:37:18 -05:00
R.B. Boyer e8ea3d7c3b
state: peering ID assignment cannot happen inside of the state store (#13525)
Move peering ID assignment outisde of the FSM, so that the ID is written
to the raft log and the same ID is used by all voters, and after
restarts.
2022-06-21 13:04:08 -05:00
R.B. Boyer 201d1458c3
xds: mesh gateways now have their own leaf certificate when involved in a peering (#13460)
This is only configured in xDS when a service with an L7 protocol is
exported.

They also load any relevant trust bundles for the peered services to
eventually use for L7 SPIFFE validation during mTLS termination.
2022-06-15 14:36:18 -05:00
freddygv 6c8ab1bbac Fixup stream tear-down steps.
1. Fix a bug where the peering leader routine would not track all active
   peerings in the "stored" reconciliation map. This could lead to
   tearing down streams where the token was generated, since the
   ConnectedStreams() method used for reconciliation returns all streams
   and not just the ones initiated by this leader routine.

2. Fix a race where stream contexts were being canceled before
   termination messages were being processed by a peer.

   Previously the leader routine would tear down streams by canceling
   their context right after the termination message was sent. This
   context cancelation could be propagated to the server side faster
   than the termination message. Now there is a change where the
   dialing peer uses CloseSend() to signal when no more messages will
   be sent. Eventually the server peer will read an EOF after receiving
   and processing the preceding termination message.

   Using CloseSend() is actually not enough to address the issue
   mentioned, since it doesn't wait for the server peer to finish
   processing messages. Because of this now the dialing peer also reads
   from the stream until an error signals that there are no more
   messages. Receiving an EOF from our peer indicates that they
   processed the termination message and have no additional work to do.

   Given that the stream is being closed, all the messages received by
   Recv are discarded. We only check for errors to avoid importing new
   data.
2022-06-13 12:10:42 -06:00
freddygv cc921a9c78 Update peering state and RPC for deferred deletion
When deleting a peering we do not want to delete the peering and all
imported data in a single operation, since deleting a large amount of
data at once could overload Consul.

Instead we defer deletion of peerings so that:

1. When a peering deletion request is received via gRPC the peering is
   marked for deletion by setting the DeletedAt field.

2. A leader routine will monitor for peerings that are marked for
   deletion and kick off a throttled deletion of all imported resources
   before deleting the peering itself.

This commit mostly addresses point #1 by modifying the peering service
to mark peerings for deletion. Another key change is to add a
PeeringListDeleted state store function which can return all peerings
marked for deletion. This function is what will be watched by the
deferred deletion leader routine.
2022-06-13 12:10:32 -06:00
Freddy 71b254522e
Clean up imported nodes/services/checks as needed (#13367)
Previously, imported data would never be deleted. As
nodes/services/checks were registered and deregistered, resources
deleted from the exporting cluster would accumulate in the imported
cluster.

This commit makes updates to replication so that whenever an update is
received for a service name we reconcile what was present in the catalog
against what was received.

This handleUpdateService method can handle both updates and deletions.
2022-06-13 11:52:28 -06:00
R.B. Boyer 7001e1151c
peering: rename initiate to establish in the context of the APIs (#13419) 2022-06-10 11:10:46 -05:00
R.B. Boyer bba3eb8cdd
peering: mesh gateways are required for cross-peer service mesh communication (#13410)
Require use of mesh gateways in order for service mesh data plane
traffic to flow between peers.

This also adds plumbing for envoy integration tests involving peers, and
one starter peering test.
2022-06-09 11:05:18 -05:00
R.B. Boyer 7423886136
peering: allow protobuf requests to populate the default partition or namespace (#13398) 2022-06-08 11:55:18 -05:00
alex bbbc50815a
peering: send leader addr (#13342)
Signed-off-by: acpana <8968914+acpana@users.noreply.github.com>
2022-06-06 10:00:38 -07:00
freddygv 647c57a416 Add agent cache-type for TrustBundleListByService
There are a handful of changes in this commit:
* When querying trust bundles for a service we need to be able to
  specify the namespace of the service.
* The endpoint needs to track the index because the cache watches use
  it.
* Extracted bulk of the endpoint's logic to a state store function
  so that index tracking could be tested more easily.
* Removed check for service existence, deferring that sort of work to ACL authz
* Added the cache type
2022-06-01 17:05:10 -06:00
Freddy 9427700270
[OSS] Add grpc endpoint to fetch a specific trust bundle (#13292)
Co-authored-by: R.B. Boyer <rb@hashicorp.com>
2022-05-31 09:54:40 -06:00
alex fd7a403e11
monitor leadership in peering service (#13257)
Signed-off-by: acpana <8968914+acpana@users.noreply.github.com>

Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: Freddy <freddygv@users.noreply.github.com>
2022-05-26 17:55:16 -07:00
Chris S. Kim 6d3bea7129
Add support for streaming CA roots to peers (#13260)
Sender watches for changes to CA roots and sends
them through the replication stream. Receiver saves
CA roots to tablePeeringTrustBundle
2022-05-26 15:24:09 -04:00
R.B. Boyer 1a8834e1c8
peering: replicate expected SNI, SPIFFE, and service protocol to peers (#13218)
The importing peer will need to know what SNI and SPIFFE name
corresponds to each exported service. Additionally it will need to know
at a high level the protocol in use (L4/L7) to generate the appropriate
connection pool and local metrics.

For replicated connect synthetic entities we edit the `Connect{}` part
of a `NodeService` to have a new section:

    {
      "PeerMeta": {
        "SNI": [
          "web.default.default.owt.external.183150d5-1033-3672-c426-c29205a576b8.consul"
        ],
        "SpiffeID": [
          "spiffe://183150d5-1033-3672-c426-c29205a576b8.consul/ns/default/dc/dc1/svc/web"
        ],
        "Protocol": "tcp"
      }
    }

This data is then replicated and saved as-is at the importing side. Both
SNI and SpiffeID are slices for now until I can be sure we don't need
them for how mesh gateways will ultimately work.
2022-05-25 12:37:44 -05:00
R.B. Boyer be631ebdce
peering: disable requirement for mesh gateways initially (#13213) 2022-05-25 10:13:23 -05:00
alex 876f3bb971
peering: expose IsLeader, hung up on dialer if follower (#13164)
Signed-off-by: acpana <8968914+acpana@users.noreply.github.com>

Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
2022-05-23 11:30:58 -07:00
R.B. Boyer 2e72f44fda
peering: accept replication stream of discovery chain information at the importing side (#13151) 2022-05-19 16:37:52 -05:00
R.B. Boyer 3e4a522882 peering: replicate discovery chains information to importing peers
Treat each exported service as a "discovery chain" and replicate one
synthetic CheckServiceNode for each chain and remote mesh gateway.

The health will be a flattened generated check of the checks for that
mesh gateway node.
2022-05-19 14:21:44 -05:00
R.B. Boyer 5a03536040 prefactor some functions out of the monolithic file 2022-05-19 14:21:29 -05:00
Freddy b38be4c0ed
Patches to peering initiation for POC demo (#13076)
Co-authored-by: R.B. Boyer <rb@hashicorp.com>
2022-05-13 13:01:00 -06:00
Evan Culver 0fa5e7be5a
peering: add TrustBundleListByService endpoint (#13048) 2022-05-12 15:58:22 -07:00
Freddy 4e215dc411
[OSS] Add upsert handling for receiving CheckServiceNode (#13061) 2022-05-12 15:04:44 -06:00
FFMMM 37a1e33834
expose meta tags for peering (#12964) 2022-05-09 13:47:37 -07:00
R.B. Boyer f507f62f3c
peering: initial sync (#12842)
- Add endpoints related to peering: read, list, generate token, initiate peering
- Update node/service/check table indexing to account for peers
- Foundational changes for pushing service updates to a peer
- Plumb peer name through Health.ServiceNodes path

see: ENT-1765, ENT-1280, ENT-1283, ENT-1283, ENT-1756, ENT-1739, ENT-1750, ENT-1679,
     ENT-1709, ENT-1704, ENT-1690, ENT-1689, ENT-1702, ENT-1701, ENT-1683, ENT-1663,
     ENT-1650, ENT-1678, ENT-1628, ENT-1658, ENT-1640, ENT-1637, ENT-1597, ENT-1634,
     ENT-1613, ENT-1616, ENT-1617, ENT-1591, ENT-1588, ENT-1596, ENT-1572, ENT-1555

Co-authored-by: R.B. Boyer <rb@hashicorp.com>
Co-authored-by: freddygv <freddy@hashicorp.com>
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: Evan Culver <eculver@hashicorp.com>
Co-authored-by: Nitya Dhanushkodi <nitya@hashicorp.com>
2022-04-21 17:34:40 -05:00