consul

Commit Graph

Author	SHA1	Message	Date
Eric Haberkorn	8d923c1789	Add the Lua Envoy extension (#15906 )	2 years ago
Dan Stough	b3bd3a6586	[OSS] feat: access logs for listeners and listener filters (#15864 ) * feat: access logs for listeners and listener filters * changelog * fix integration test	2 years ago
Nitya Dhanushkodi	24f01f96b1	add extensions for local service to GetExtensionConfigurations (#15871 ) This gets the extensions information for the local service into the snapshot and ExtensionConfigurations for a proxy. It grabs the extensions from config entries and puts them in structs.NodeService.Proxy field, which already is copied into the config snapshot. Also: * add EnvoyExtensions to api.AgentService so that it matches structs.NodeService	2 years ago
Nitya Dhanushkodi	d382ca0aec	extensions: refactor serverless plugin to use extensions from config entry fields (#15817 ) docs: update config entry docs and the Lambda manual registration docs Co-authored-by: Nitya Dhanushkodi <nitya@hashicorp.com> Co-authored-by: Eric <eric@haberkorn.co>	2 years ago
cskh	252a08e903	Change field to pointer so it will be parsed as nil (#15831 )	2 years ago
Dan Stough	233dbcb67f	feat: add access logging API to proxy defaults (#15780 )	2 years ago
Luke Kysow	fbd47e1161	config entry: hardcode proxy-defaults name as global (#14833 ) * config entry: hardcode proxy-defaults name as global proxy-defaults can only have the name global. Because of this, we support not even setting the name in the config file: ``` kind = "proxy-defaults" ``` Previously, writing this would result in the output: ``` Config entry written: proxy-defaults/ ``` Now it will output: ``` Config entry written: proxy-defaults/global ``` This change follows what was done for the new Mesh config entry.	2 years ago
boruszak	38b1a515f1	Mergimg	2 years ago
Derek Menteer	aa4709ab74	Add envoy connection balancing. (#14616 ) Add envoy connection balancing config.	2 years ago
malizz	e743eefbd1	update enforcing consecutive 5xx type to pointer type (#14592 ) * update enforcing condecutive 5xx type to pointer type * update test	2 years ago
cskh	f22685b969	Config-entry: Support proxy config in service-defaults (#14395 ) * Config-entry: Support proxy config in service-defaults * Update website/content/docs/connect/config-entries/service-defaults.mdx Co-authored-by: Jeff Boruszak <104028618+boruszak@users.noreply.github.com>	2 years ago
malizz	b3ac8f48ca	Add additional parameters to envoy passive health check config (#14238 ) * draft commit * add changelog, update test * remove extra param * fix test * update type to account for nil value * add test for custom passive health check * update comments and tests * update description in docs * fix missing commas	2 years ago
cskh	527ebd068a	fix: missing MaxInboundConnections field in service-defaults config entry (#14072 ) * fix: missing max_inbound_connections field in merge config	2 years ago
DanStough	2da8949d78	feat: convert destination address to slice	2 years ago
Dhia Ayachi	1b779240ae	update gateway-services table with endpoints (#13217 ) * update gateway-services table with endpoints * fix failing test * remove unneeded config in test * rename "endpoint" to "destination" * more endpoint renaming to destination in tests * update isDestination based on service-defaults config entry creation * use a 3 state kind to be able to set the kind to unknown (when neither a service or a destination exist) * set unknown state to empty to avoid modifying alot of tests * fix logic to set the kind correctly on CRUD * fix failing tests * add missing tests and fix service delete * fix failing test * Apply suggestions from code review Co-authored-by: Dan Stough <dan.stough@hashicorp.com> * fix a bug with kind and add relevant test * fix compile error * fix failing tests * add kind to clone * fix failing tests * fix failing tests in catalog endpoint * fix service dump test * Apply suggestions from code review Co-authored-by: Dan Stough <dan.stough@hashicorp.com> * remove duplicate tests * rename consts and fix kind when no destination is defined in the service-defaults. * rename Kind to ServiceKind and change switch to use .(type) Co-authored-by: Dan Stough <dan.stough@hashicorp.com>	3 years ago
DanStough	817449041d	chore(test): Update bats version	3 years ago
DanStough	147fd96d97	feat: add endpoint struct to ServiceConfigEntry	3 years ago
R.B. Boyer	e79ce8ab03	xds: adding control of the mesh-wide min/max TLS versions and cipher suites from the mesh config entry (#12601 ) - `tls.incoming`: applies to the inbound mTLS targeting the public listener on `connect-proxy` and `terminating-gateway` envoy instances - `tls.outgoing`: applies to the outbound mTLS dialing upstreams from `connect-proxy` and `ingress-gateway` envoy instances Fixes #11966	3 years ago
Chris S. Kim	f5d816dace	Remove incorrect usage of url.PathEscape (#12184 ) When r.toHTTP is called, http.Request is built with the path already escaped. This removes all calls to url.PathEscape that would have led to double-escaped URLs.	3 years ago
Dao Thanh Tung	6765c0d965	Add api changes to agent endpoint for part 2 (#12150 )	3 years ago
freddygv	ed6076db26	Rename partition-exports to exported-services Using a name less tied to partitions gives us more flexibility to use this config entry in OSS for exports between datacenters/meshes.	3 years ago
Daniel Upton	d47b7311b8	Support Check-And-Set deletion of config entries (#11419 ) Implements #11372	3 years ago
sidzi	29f192a130	Refactor requireHttpCodes for segregated error handling (#11287 )	3 years ago
freddygv	5c24ed61a8	Rename service-exports to partition-exports Existing config entries prefixed by service- are specific to individual services. Since this config entry applies to partitions it is being renamed. Additionally, the Partition label was changed to Name because using Partition at the top-level and in the enterprise meta was leading to the enterprise meta partition being dropped by msgpack.	3 years ago
Kyle Havlovitz	04cd2c983e	Add new service-exports config entry	3 years ago
Chris S. Kim	5b658d2f39	Sync partition fields from enterprise (#11021 )	3 years ago
Daniel Nephin	6ac9149c3f	api: properly close the response body reads resp.Body until EOF, so that the http client is able to re-use the TCP connection.	3 years ago
Freddy	429f9d8bb8	Add flag for transparent proxies to dial individual instances (#10329 )	4 years ago
Daniel Nephin	62efaaab21	config-entry: remove Kind and Name field from Mesh config entry No config entry needs a Kind field. It is only used to determine the Go type to target. As we introduce new config entries (like this one) we can remove the kind field and have the GetKind method return the single supported value. In this case (similar to proxy-defaults) the Name field is also unnecessary. We always use the same value. So we can omit the name field entirely.	4 years ago
Freddy	078c40425f	Rename "cluster" config entry to "mesh" (#10127 ) This config entry is being renamed primarily because in k8s the name cluster could be confusing given that the config entry applies across federated datacenters. Additionally, this config entry will only apply to Consul as a service mesh, so the more generic "cluster" name is not needed.	4 years ago
R.B. Boyer	4db8b78854	connect: update centralized upstreams representation in service-defaults (#10015 )	4 years ago
freddygv	7cb3f32672	Convert new tproxy structs in api module into ptrs This way we avoid serializing these when empty. Otherwise users of the latest version of the api submodule cannot interact with older versions of Consul, because a new api client would send keys that the older Consul doesn't recognize yet.	4 years ago
freddygv	7bd51ff536	Replace TransparentProxy bool with ProxyMode This PR replaces the original boolean used to configure transparent proxy mode. It was replaced with a string mode that can be set to: - "": Empty string is the default for when the setting should be defaulted from other configuration like config entries. - "direct": Direct mode is how applications originally opted into the mesh. Proxy listeners need to be dialed directly. - "transparent": Transparent mode enables configuring Envoy as a transparent proxy. Traffic must be captured and redirected to the inbound and outbound listeners. This PR also adds a struct for transparent proxy specific configuration. Initially this is not stored as a pointer. Will revisit that decision before GA.	4 years ago
freddygv	98ba582797	Fixup mesh gateway docs	4 years ago
freddygv	ab752c1c86	Avoid sending zero-value upstream defaults from api	4 years ago
R.B. Boyer	499fee73b3	connect: add toggle to globally disable wildcard outbound network access when transparent proxy is enabled (#9973 ) This adds a new config entry kind "cluster" with a single special name "cluster" where this can be controlled.	4 years ago
freddygv	8b46d8dcbb	Restore old Envoy prefix on escape hatches This is done because after removing ID and NodeName from ServiceConfigRequest we will no longer know whether a request coming in is for a Consul client earlier than v1.10.	4 years ago
freddygv	41b2ba1e58	Add omitempty across the board for UpstreamConfig	4 years ago
freddygv	6fd30d0384	Add TransparentProxy opt to proxy definition	4 years ago
freddygv	e3dc2a49df	Turn Limits and PassiveHealthChecks into pointers	4 years ago
freddygv	87cde19b4c	Create new types for service-defaults upstream cfg	4 years ago
R.B. Boyer	a2a8e9c783	connect: intentions are now managed as a new config entry kind "service-intentions" (#8834 ) - Upgrade the ConfigEntry.ListAll RPC to be kind-aware so that older copies of consul will not see new config entries it doesn't understand replicate down. - Add shim conversion code so that the old API/CLI method of interacting with intentions will continue to work so long as none of these are edited via config entry endpoints. Almost all of the read-only APIs will continue to function indefinitely. - Add new APIs that operate on individual intentions without IDs so that the UI doesn't need to implement CAS operations. - Add a new serf feature flag indicating support for intentions-as-config-entries. - The old line-item intentions way of interacting with the state store will transparently flip between the legacy memdb table and the config entry representations so that readers will never see a hiccup during migration where the results are incomplete. It uses a piece of system metadata to control the flip. - The primary datacenter will begin migrating intentions into config entries on startup once all servers in the datacenter are on a version of Consul with the intentions-as-config-entries feature flag. When it is complete the old state store representations will be cleared. We also record a piece of system metadata indicating this has occurred. We use this metadata to skip ALL of this code the next time the leader starts up. - The secondary datacenters continue to run the old intentions replicator until all servers in the secondary DC and primary DC support intentions-as-config-entries (via serf flag). Once this condition it met the old intentions replicator ceases. - The secondary datacenters replicate the new config entries as they are migrated in the primary. When they detect that the primary has zeroed it's old state store table it waits until all config entries up to that point are replicated and then zeroes its own copy of the old state store table. We also record a piece of system metadata indicating this has occurred. We use this metadata to skip ALL of this code the next time the leader starts up.	4 years ago
R.B. Boyer	d2eb27e0a3	api: support GetMeta() and GetNamespace() on all config entry kinds (#8764 ) Fixes #8755 Since I was updating the interface, i also added the missing `GetNamespace()`. Depending upon how you look at it, this is a breaking change since it adds methods to the exported interface `api.ConfigEntry`. Given that you cannot define your own config entry kinds, and all of the machinery of the `api.Client` acts like a factory to construct the canned ones from the rest of the module, this feels like it's not a problematic change as it would only break someone who had reimplemented the `ConfigEntry` interface themselves for no apparent utility?	4 years ago
R.B. Boyer	119e945c3e	connect: all config entries pick up a meta field (#8596 ) Fixes #8595	4 years ago
Daniel Nephin	8ced4300c8	Add alias struct tags for new decode hook	5 years ago
Freddy	90576060bc	Add config entry for terminating gateways (#7545 ) This config entry will be used to configure terminating gateways. It accepts the name of the gateway and a list of services the gateway will represent. For each service users will be able to specify: its name, namespace, and additional options for TLS origination. Co-authored-by: Kyle Havlovitz <kylehav@gmail.com> Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>	5 years ago
Kyle Havlovitz	c911174327	Add config entry/state for Ingress Gateways (#7483 ) * Add Ingress gateway config entry and other relevant structs * Add api package tests for ingress gateways * Embed EnterpriseMeta into ingress service struct * Add namespace fields to api module and test consul config write decoding * Don't require a port for ingress gateways * Add snakeJSON and camelJSON cases in command test * Run Normalize on service's ent metadata Sadly cannot think of a way to test this in OSS. * Every protocol requires at least 1 service * Validate ingress protocols * Update agent/structs/config_entry_gateways.go Co-authored-by: Chris Piraino <cpiraino@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com>	5 years ago
Matt Keeler	c09693e545	Updates to Config Entries and Connect for Namespaces (#7116 )	5 years ago
Freddy	fdd10dd8b8	Expose HTTP-based paths through Connect proxy (#6446 ) Fixes: #5396 This PR adds a proxy configuration stanza called expose. These flags register listeners in Connect sidecar proxies to allow requests to specific HTTP paths from outside of the node. This allows services to protect themselves by only listening on the loopback interface, while still accepting traffic from non Connect-enabled services. Under expose there is a boolean checks flag that would automatically expose all registered HTTP and gRPC check paths. This stanza also accepts a paths list to expose individual paths. The primary use case for this functionality would be to expose paths for third parties like Prometheus or the kubelet. Listeners for requests to exposed paths are be configured dynamically at run time. Any time a proxy, or check can be registered, a listener can also be created. In this initial implementation requests to these paths are not authenticated/encrypted.	5 years ago
R.B. Boyer	fd1c62ee8b	connect: ensure time.Duration fields retain their human readable forms in the API (#6348 ) This applies for both config entries and the compiled discovery chain. Also omit some other config entries fields when empty.	5 years ago

1 2

59 Commits (4e154144a6dc4e98b3414d81d47cfb7e9ad2a6cc)