[OG Author: michael.zalimeni@hashicorp.com, rebase needed a separate PR]
* v2: support virtual port in Service port references
In addition to Service target port references, allow users to specify a
port by stringified virtual port value. This is useful in environments
such as Kubernetes where typical configuration is written in terms of
Service virtual ports rather than workload (pod) target port names.
Retaining the option of referencing target ports by name supports VMs,
Nomad, and other use cases where virtual ports are not used by default.
To support both uses cases at once, we will strictly interpret port
references based on whether the value is numeric. See updated
`ServicePort` docs for more details.
* v2: update service ref docs for virtual port support
Update proto and generated .go files with docs reflecting virtual port
reference support.
* v2: add virtual port references to L7 topo test
Add coverage for mixed virtual and target port references to existing
test.
* update failover policy controller tests to work with computed failover policy and assert error conditions against FailoverPolicy and ComputedFailoverPolicy resources
* accumulate services; don't overwrite them in enterprise
---------
Co-authored-by: Michael Zalimeni <michael.zalimeni@hashicorp.com>
Co-authored-by: R.B. Boyer <rb@hashicorp.com>
* If a workload does not implement a port, it should not be included in the list of endpoints for the Envoy cluster for that port.
* Adds tenancy tests for xds controller and xdsv2 resource generation, and adds all those files.
* The original change in this PR was for filtering the list of endpoints by the port being routed to (bullet 1). Since I made changes to sidecarproxycontroller golden files, I realized some of the golden files were unused because of the tenancy changes, so when I deleted those, that broke xds controller tests which weren't correctly using tenancy. So when I fixed that, then the xdsv2 tests broke, so I added tenancy support there too. So now, from sidecarproxy controller -> xds controller -> xdsv2 we now have tenancy support and all the golden files are lined up.
* API Gateway proto
* fix lint issue
* new line
* run make proto format
* checkpoint
* stub
* Update internal/mesh/internal/controllers/apigateways/controller.go
* panic when passing an incorrect type to the data fetcher
* Add assertions for sidecarproxy datafetcher as well
* rename assertion function
* Add in comments to ensure devs know about potential panics for using
invalid types
* fix method call
* Use black hole cluster for default router when no matches
* Update test assertions
* Use null route cluster instead of black hole cluster concept
* Update test assertions
* Add cache resource decoding helpers
* Implement a common package for workload selection facilities. This includes:
* Controller cache Index
* ACL hooks
* Dependency Mapper to go from workload to list of resources which select it
* Dependency Mapper to go from a resource which selects workloads to all the workloads it selects.
* Update the endpoints controller to use the cache instead of custom mappers.
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* Upgrade Go to 1.21
* ci: detect Go backwards compatibility test version automatically
For our submodules and other places we choose to test against previous
Go versions, detect this version automatically from the current one
rather than hard-coding it.
* NET-6426 Create ProxyStateTemplate when reconciling MeshGateway resource
* Add TODO for switching fetch method based on gateway type
* Use gateway-kind in workload metadata instead of owner reference
* Create ProxyStateTemplate builder for gatewayproxy controller
* Update to use new controller interface
* Add copyright headers
* Set correct name for ProxyStateTemplate identity reference
* Generate empty ProxyStateTemplate by fetching MeshGateway
This cheats and looks up the MeshGateway directly. In the future, we will need a Workload => xGateway mapper
* Specify owner reference when writing ProxyStateTemplate
* Update dependency mapper to account for multiple controllers per resource type
* Regenerate v2 resource dependencies map
* Add helpful trace logs, tag TODOs with ticket identifiers
* NET-6899 Create name-aligned Service when reconciling MeshGateway resource
The Service has an owner reference added to it indicating that it belongs to a MeshGateway
* Specify port list when creating Service
* Use constants, add TODO w/ ticket reference
* Include gateway-kind in metadata of Service resource
* NET-6663 Modify sidecarproxy controller to skip xGateway resources
* Check workload metadata after nil-check for workload
* Add test asserting that workloads with meta gateway-kind are ignored
* Use more common pattern for map access to increase readability
* Add a make target to run lint-consul-retry on all the modules
* Cleanup sdk/testutil/retry
* Fix a bunch of retry.Run* usage to not use the outer testing.T
* Fix some more recent retry lint issues and pin to v1.4.0 of lint-consul-retry
* Fix codegen copywrite lint issues
* Don’t perform cleanup after each retry attempt by default.
* Use the common testutil.TestingTB interface in test-integ/tenancy
* Fix retry tests
* Update otel access logging extension test to perform requests within the retry block
test: Address occasional flakes in sidecarproxy/controller_test.go
We've observed an occasional flake in this test where some state check
fails. Adding in some wait wrappers to these state checks will hopefully
address the issue, assuming it is a simple flake.
* Add meshconfiguration/controller
* Add MeshConfiguration Registration function
* Fix the TODOs on the RegisterMeshGateway function
* Call RegisterMeshConfiguration
* Add comment to MeshConfigurationRegistration
* Add a test for Reconcile and some comments
* [NET-6438] Add tenancy to xDS Tests
* [NET-6438] Add tenancy to xDS Tests
- Fixing imports
* [NET-6438] Add tenancy to xDS Tests
- Added cleanup post test run
* [NET-6356] Add tenancy to xDS Tests
- Added cleanup post test run
* [NET-6438] Add tenancy to xDS Tests
- using t.Cleanup instead of defer delete
* [NET-6438] Add tenancy to xDS Tests
- rebased
* [NET-6438] Add tenancy to xDS Tests
- rebased
* Generate resource_types for MeshGateway by specifying spec option
* Register MeshGateway type w/ TODOs for hooks
* Initialize controller for MeshGateway resources
* Add meshgateway to list of v2 resource dependencies for golden test
* Scope MeshGateway resource to partition
* node health controller tenancy
* some prog
* some fixes
* revert
* pr comment resolved
* removed name
* Add namespace and tenancy in sidecar proxy controller test
* revert node health controller
* clean up data
* fix local
* copy from ENT
* removed dup code
* removed tenancy
* add test tenancies
* cover all protocols in local_app golden tests
* fix xds tests
* updating latest
* fix broken test
* add sorting of routers to TestBuildLocalApp to get rid of the flaking
Add some generic type hook wrappers to first decode the data
There seems to be a pattern for Validation, Mutation and Write Authorization hooks where they first need to decode the Any data before doing the domain specific work.
This PR introduces 3 new functions to generate wrappers around the other hooks to pre-decode the data into a DecodedResource and pass that in instead of the original pbresource.Resource.
This PR also updates the various catalog data types to use the new hook generators.
* xds: Ensure v2 route match is populated for gRPC
Similar to HTTP, ensure that route match config (which is required by
Envoy) is populated when default values are used.
Because the default matches generated for gRPC contain a single empty
`GRPCRouteMatch`, and that proto does not directly support prefix-based
config, an interpretation of the empty struct is needed to generate the
same output that the `HTTPRouteMatch` is explicitly configured to
provide in internal/mesh/internal/controllers/routes/generate.go.
* xds: Ensure protocol set for gRPC resources
Add explicit protocol in `ProxyStateTemplate` builders and validate it
is always set on clusters. This ensures that HTTP filters and
`http2_protocol_options` are populated in all the necessary places for
gRPC traffic and prevents future unintended omissions of non-TCP
protocols.
Co-authored-by: John Murret <john.murret@hashicorp.com>
---------
Co-authored-by: John Murret <john.murret@hashicorp.com>
* NET-5397 - wire up golden tests from sidecar-proxy controller for xds controller and xdsv2
* WIP
* WIP
* everything matching except leafCerts. need to mock those
* single port destinations working except mixed destinations
* golden test input to xds controller tests for destinations
* proposed fix for failover group naming errors
* clean up test to use helper.
* clean up test to use helper.
* fix test file
* add docstring for test function.
* add docstring for test function.
* fix linting error
* fixing test after route fix merged into main
* first source test works
* WIP
* modify all source files
* source tests pass
* fixing tests after bug fix in main
* NET-5397 - wire up golden tests from sidecar-proxy controller for xds controller and xdsv2
* WIP
* WIP
* everything matching except leafCerts. need to mock those
* single port destinations working except mixed destinations
* golden test input to xds controller tests for destinations
* proposed fix for failover group naming errors
* clean up test to use helper.
* clean up test to use helper.
* fix test file
* add docstring for test function.
* add docstring for test function.
* fix linting error
* fixing test after route fix merged into main
When testing adding http probes to apps, I ran into some issues which I fixed here:
- The listener should be listening on the exposed listener port, updated that.
- The listener and route names were pointing to the path of the exposed path. In my test, the path was "/" resulting in an empty string path. Also, the path may not be unique across exposed path listeners, so I decided to use the path+exposed port as the unique identifier.
Matt Keeler