Add case insensitive param on service route match
This commit adds in a new feature that allows service routers to specify that
paths and path prefixes should ignore upper / lower casing when matching URLs.
Co-authored-by: Derek Menteer <105233703+hashi-derek@users.noreply.github.com>
This add a fix to properly verify the gateway mode before creating a watch specific to mesh gateways. This watch have a high performance cost and when mesh gateways are not used is not used.
This also adds an optimization to only return the nodes when watching the Internal.ServiceDump RPC to avoid unnecessary disco chain compilation. As watches in proxy config only need the nodes.
* add a hash to config entries when normalizing
* add GetHash and implement comparing hashes
* only update if the Hash is different
* only update if the Hash is different and not 0
* fix proto to include the Hash
* fix proto gen
* buf format
* add SetHash and fix tests
* fix config load tests
* fix state test and config test
* recalculate hash when restoring config entries
* fix snapshot restore test
* add changelog
* fix missing normalize, fix proto indexes and add normalize test
* Update catalog and ui endpoints to show APIGateway in gateway service
topology view
* Added initial implementation for service view
* updated ui
* Fix topology view for gateways
* Adding tests for gw controller
* remove unused args
* Undo formatting changes
* Fix call sites for upstream/downstream gw changes
* Add config entry tests
* Fix function calls again
* Move from ServiceKey to ServiceName, cleanup from PR review
* Add additional check for length of services in bound apigateway for
IsSame comparison
* fix formatting for proto
* gofmt
* Add DeepCopy for retrieved BoundAPIGateway
* gofmt
* gofmt
* Rename function to be more consistent
When the v2 catalog experiment is enabled the old v1 catalog apis will be
forcibly disabled at both the API (json) layer and the RPC (msgpack) layer.
This will also disable anti-entropy as it uses the v1 api.
This includes all of /v1/catalog/*, /v1/health/*, most of /v1/agent/*,
/v1/config/*, and most of /v1/internal/*.
This PR fixes an issue where upstreams did not correctly inherit the proper
namespace / partition from the parent service when attempting to fetch the
upstream protocol due to inconsistent normalization.
Some of the merge-service-configuration logic would normalize to default, while
some of the proxycfg logic would normalize to match the parent service. Due to
this mismatch in logic, an incorrect service-defaults configuration entry would
be fetched and have its protocol applied to the upstream.
* Refactors the leafcert package to not have a dependency on agent/consul and agent/cache to avoid import cycles. This way the xds controller can just import the leafcert package to use the leafcert manager.
The leaf cert logic in the controller:
* Sets up watches for leaf certs that are referenced in the ProxyStateTemplate (which generates the leaf certs too).
* Gets the leaf cert from the leaf cert cache
* Stores the leaf cert in the ProxyState that's pushed to xds
* For the cert watches, this PR also uses a bimapper + a thin wrapper to map leaf cert events to related ProxyStateTemplates
Since bimapper uses a resource.Reference or resource.ID to map between two resource types, I've created an internal type for a leaf certificate to use for the resource.Reference, since it's not a v2 resource.
The wrapper allows mapping events to resources (as opposed to mapping resources to resources)
The controller tests:
Unit: Ensure that we resolve leaf cert references
Lifecycle: Ensure that when the CA is updated, the leaf cert is as well
Also adds a new spiffe id type, and adds workload identity and workload identity URI to leaf certs. This is so certs are generated with the new workload identity based SPIFFE id.
* Pulls out some leaf cert test helpers into a helpers file so it
can be used in the xds controller tests.
* Wires up leaf cert manager dependency
* Support getting token from proxytracker
* Add workload identity spiffe id type to the authorize and sign functions
---------
Co-authored-by: John Murret <john.murret@hashicorp.com>
* Add response header filters to http-route config entry definitions
* Map response header filters from config entry when constructing route destination
* Support response header modifiers at the service level as well
* Update protobuf definitions
* Update existing unit tests
* Add response filters to route consolidation logic
* Make existing unit tests more robust
* Add missing docstring
* Add changelog entry
* Add response filter modifiers to existing integration test
* Add more robust testing for response header modifiers in the discovery chain
* Add more robust testing for request header modifiers in the discovery chain
* Modify test to verify that service filter modifiers take precedence over rule filter modifiers
* [NET-5325] ACL templated policies support in tokens and roles
- Add API support for creating tokens/roles with templated-policies
- Add CLI support for creating tokens/roles with templated-policies
* adding changelog
This PR enables the GetEnvoyBootstrapParams endpoint to construct envoy bootstrap parameters from v2 catalog and mesh resources.
* Make bootstrap request and response parameters less specific to services so that we can re-use them for workloads or service instances.
* Remove ServiceKind from bootstrap params response. This value was unused previously and is not needed for V2.
* Make access logs generation generic so that we can generate them using v1 or v2 resources.
Add support for querying tokens by service name
The consul-k8s endpoints controller has a workflow where it fetches all tokens.
This is not performant for large clusters, where there may be a sizable number
of tokens. This commit attempts to alleviate that problem and introduces a new
way to query by the token's service name.
* Add the plumbing for APIGW JWT work
* Remove unneeded import
* Add deep equal function for HTTPMatch
* Added plumbing for status conditions
* Remove unneeded comment
* Fix comments
* Add calls in xds listener for apigateway to setup listener jwt auth
* Adding explicit MPL license for sub-package
This directory and its subdirectories (packages) contain files licensed with the MPLv2 `LICENSE` file in this directory and are intentionally licensed separately from the BSL `LICENSE` file at the root of this repository.
* Adding explicit MPL license for sub-package
This directory and its subdirectories (packages) contain files licensed with the MPLv2 `LICENSE` file in this directory and are intentionally licensed separately from the BSL `LICENSE` file at the root of this repository.
* Updating the license from MPL to Business Source License
Going forward, this project will be licensed under the Business Source License v1.1. Please see our blog post for more details at <Blog URL>, FAQ at www.hashicorp.com/licensing-faq, and details of the license at www.hashicorp.com/bsl.
* add missing license headers
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
---------
Co-authored-by: hashicorp-copywrite[bot] <110428419+hashicorp-copywrite[bot]@users.noreply.github.com>
* Added oss config entries for Policy and JWT on APIGW
* Updated structs for config entry
* Updated comments, ran deep-copy
* Move JWT configuration into OSS file
* Add in the config entry OSS file for jwts
* Added changelog
* fixing proto spacing
* Moved to using manually written deep copy method
* Use pointers for override/default fields in apigw config entries
* Run gen scripts for changed types
* [CC-5719] Add support for builtin global-read-only policy
* Add changelog
* Add read-only to docs
* Fix some minor issues.
* Change from ReplaceAll to Sprintf
* Change IsValidPolicy name to return an error instead of bool
* Fix PolicyList test
* Fix other tests
* Apply suggestions from code review
Co-authored-by: Paul Glass <pglass@hashicorp.com>
* Fix state store test for policy list.
* Fix naming issues
* Update acl/validation.go
Co-authored-by: Chris Thain <32781396+cthain@users.noreply.github.com>
* Update agent/consul/acl_endpoint.go
---------
Co-authored-by: Paul Glass <pglass@hashicorp.com>
Co-authored-by: Chris Thain <32781396+cthain@users.noreply.github.com>
* update UINodes and UINodeInfo response with consul-version info added as NodeMeta, fetched from serf members
* update test cases TestUINodes, TestUINodeInfo
* added nil check for map
* add consul-version in local agent node metadata
* get consul version from serf member and add this as node meta in catalog register request
* updated ui mock response to include consul versions as node meta
* updated ui trans and added version as query param to node list route
* updates in ui templates to display consul version with filter and sorts
* updates in ui - model class, serializers,comparators,predicates for consul version feature
* added change log for Consul Version Feature
* updated to get version from consul service, if for some reason not available from serf
* updated changelog text
* updated dependent testcases
* multiselection version filter
* Update agent/consul/state/catalog.go
comments updated
Co-authored-by: Jared Kirschner <85913323+jkirschner-hashicorp@users.noreply.github.com>
---------
Co-authored-by: Jared Kirschner <85913323+jkirschner-hashicorp@users.noreply.github.com>
Lord-Y