Commit Graph

35 Commits (4bf70dd857eab01dbca31454833dcfed3f28ddbb)

Author SHA1 Message Date
freddygv 768dbaa68d Add session flag to cookie config 2020-09-11 18:34:03 -06:00
freddygv 9d2a9169fd PR comments 2020-09-11 10:49:26 -06:00
freddygv eab90ea9fa Revert EnvoyConfig nesting 2020-09-11 09:21:43 -06:00
freddygv 959d9913b8 Add server receiver to routes and log tgw err 2020-09-03 16:19:58 -06:00
freddygv 318aa094fd Fix http assertion in route creation 2020-09-03 10:21:20 -06:00
freddygv f81fe6a1a1 Remove LB infix and move injection to xds 2020-09-02 15:13:50 -06:00
freddygv 63f79e5f9b Restructure structs and other PR comments 2020-09-02 09:10:50 -06:00
freddygv 28d0602fc1 Pass LB config to Envoy via xDS 2020-08-28 14:27:40 -06:00
R.B. Boyer 74d5df7c7a
xds: use envoy's rbac filter to handle intentions entirely within envoy (#8569) 2020-08-27 12:20:58 -05:00
R.B. Boyer e3cd4a8539
connect: use stronger validation that ingress gateways have compatible protocols defined for their upstreams (#8470)
Fixes #8466

Since Consul 1.8.0 there was a bug in how ingress gateway protocol
compatibility was enforced. At the point in time that an ingress-gateway
config entry was modified the discovery chain for each upstream was
checked to ensure the ingress gateway protocol matched. Unfortunately
future modifications of other config entries were not validated against
existing ingress-gateway definitions, such as:

1. create tcp ingress-gateway pointing to 'api' (ok)
2. create service-defaults for 'api' setting protocol=http (worked, but not ok)
3. create service-splitter or service-router for 'api' (worked, but caused an agent panic)

If you were to do these in a different order, it would fail without a
crash:

1. create service-defaults for 'api' setting protocol=http (ok)
2. create service-splitter or service-router for 'api' (ok)
3. create tcp ingress-gateway pointing to 'api' (fail with message about
   protocol mismatch)

This PR introduces the missing validation. The two new behaviors are:

1. create tcp ingress-gateway pointing to 'api' (ok)
2. (NEW) create service-defaults for 'api' setting protocol=http ("ok" for back compat)
3. (NEW) create service-splitter or service-router for 'api' (fail with
   message about protocol mismatch)

In consideration for any existing users that may be inadvertently be
falling into item (2) above, that is now officiall a valid configuration
to be in. For anyone falling into item (3) above while you cannot use
the API to manufacture that scenario anymore, anyone that has old (now
bad) data will still be able to have the agent use them just enough to
generate a new agent/proxycfg error message rather than a panic.
Unfortunately we just don't have enough information to properly fix the
config entries.
2020-08-12 11:19:20 -05:00
R.B. Boyer c599a2f5f4
xds: add support for envoy 1.15.0 and drop support for 1.11.x (#8424)
Related changes:

- hard-fail the xDS connection attempt if the envoy version is known to be too old to be supported
- remove the RouterMatchSafeRegex proxy feature since all supported envoy versions have it
- stop using --max-obj-name-len (due to: envoyproxy/envoy#11740)
2020-07-31 15:52:49 -05:00
R.B. Boyer 1eef096dfe
xds: version sniff envoy and switch regular expressions from 'regex' to 'safe_regex' on newer envoy versions (#8222)
- cut down on extra node metadata transmission
- split the golden file generation to compare all envoy version
2020-07-09 17:04:51 -05:00
Chris Piraino 735337b170
Append port number to ingress host domain (#8190)
A port can be sent in the Host header as defined in the HTTP RFC, so we
take any hosts that we want to match traffic to and also add another
host with the listener port added.

Also fix an issue with envoy integration tests not running the
case-ingress-gateway-tls test.
2020-07-07 10:43:04 -05:00
Daniel Nephin 010a609912 Fix a bunch of unparam lint issues 2020-06-24 13:00:14 -04:00
R.B. Boyer c63c994b04
connect: upgrade github.com/envoyproxy/go-control-plane to v0.9.5 (#8165) 2020-06-23 15:19:56 -05:00
Chris Piraino 1a853fc954
Always require Host header values for http services (#7990)
Previously, we did not require the 'service-name.*' host header value
when on a single http service was exposed. However, this allows a user
to get into a situation where, if they add another service to the
listener, suddenly the previous service's traffic might not be routed
correctly. Thus, we always require the Host header, even if there is
only 1 service.

Also, we add the make the default domain matching more restrictive by
matching "service-name.ingress.*" by default. This lines up better with
the namespace case and more accurately matches the Consul DNS value we
expect people to use in this case.
2020-06-08 13:16:24 -05:00
Chris Piraino d498a0afc9 Correctly set a namespace label in the required domain for xds routes
If an upstream is not in the default namespace, we expect DNS requests
to be served over "<service-name>.ingress.<namespace>.*"
2020-05-06 15:06:14 -05:00
Chris Piraino 45e635286a Re-add comment on connect-proxy virtual hosts 2020-05-06 15:06:14 -05:00
Chris Piraino f40833d094 Allow Hosts field to be set on an ingress config entry
- Validate that this cannot be set on a 'tcp' listener nor on a wildcard
service.
- Add Hosts field to api and test in consul config write CLI
- xds: Configure envoy with user-provided hosts from ingress gateways
2020-05-06 15:06:13 -05:00
Kyle Havlovitz 247f9eaf13 Allow ingress gateways to route traffic based on Host header
This commit adds the necessary changes to allow an ingress gateway to
route traffic from a single defined port to multiple different upstream
services in the Consul mesh.

To do this, we now require all HTTP requests coming into the ingress
gateway to specify a Host header that matches "<service-name>.*" in
order to correctly route traffic to the correct service.

- Differentiate multiple listener's route names by port
- Adds a case in xds for allowing default discovery chains to create a
  route configuration when on an ingress gateway. This allows default
  services to easily use host header routing
- ingress-gateways have a single route config for each listener
  that utilizes domain matching to route to different services.
2020-05-06 15:06:13 -05:00
Kyle Havlovitz e7b1ee55de Add http routing support and integration test to ingress gateways 2020-04-24 09:31:32 -05:00
Daniel Nephin 1d90ecc31d Remove unused token parameter 2020-03-27 17:57:16 -04:00
Chris Piraino 47ff532735
Fixes envoy config when both RetryOn* values are set (#7280) 2020-02-18 09:25:47 -06:00
R.B. Boyer 561b2fe606
connect: generate the full SNI names for discovery targets in the compiler rather than in the xds package (#6340) 2019-08-19 13:03:03 -05:00
R.B. Boyer c395affc93
connect: expose an API endpoint to compile the discovery chain (#6248)
In addition to exposing compilation over the API cleaned up the structures that would be exchanged to be cleaner and easier to support and understand.

Also removed ability to configure the envoy OverprovisioningFactor.
2019-08-02 15:34:54 -05:00
R.B. Boyer f02924fafe
connect: simplify the compiled discovery chain data structures (#6242)
This should make them better for sending over RPC or the API.

Instead of a chain implemented explicitly like a linked list (nodes
holding pointers to other nodes) instead switch to a flat map of named
nodes with nodes linking other other nodes by name. The shipped
structure is just a map and a string to indicate which key to start
from.

Other changes:

* inline the compiler option InferDefaults as true

* introduce compiled target config to avoid needing to send back
  additional maps of Resolvers; future target-specific compiled state
  can go here

* move compiled MeshGateway out of the Resolver and into the
  TargetConfig where it makes more sense.
2019-08-01 22:44:05 -05:00
R.B. Boyer 6393edba53
connect: reconcile how upstream configuration works with discovery chains (#6225)
* connect: reconcile how upstream configuration works with discovery chains

The following upstream config fields for connect sidecars sanely
integrate into discovery chain resolution:

- Destination Namespace/Datacenter: Compilation occurs locally but using
different default values for namespaces and datacenters. The xDS
clusters that are created are named as they normally would be.

- Mesh Gateway Mode (single upstream): If set this value overrides any
value computed for any resolver for the entire discovery chain. The xDS
clusters that are created may be named differently (see below).

- Mesh Gateway Mode (whole sidecar): If set this value overrides any
value computed for any resolver for the entire discovery chain. If this
is specifically overridden for a single upstream this value is ignored
in that case. The xDS clusters that are created may be named differently
(see below).

- Protocol (in opaque config): If set this value overrides the value
computed when evaluating the entire discovery chain. If the normal chain
would be TCP or if this override is set to TCP then the result is that
we explicitly disable L7 Routing and Splitting. The xDS clusters that
are created may be named differently (see below).

- Connect Timeout (in opaque config): If set this value overrides the
value for any resolver in the entire discovery chain. The xDS clusters
that are created may be named differently (see below).

If any of the above overrides affect the actual result of compiling the
discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op
override to "tcp") then the relevant parameters are hashed and provided
to the xDS layer as a prefix for use in naming the Clusters. This is to
ensure that if one Upstream discovery chain has no overrides and
tangentially needs a cluster named "api.default.XXX", and another
Upstream does have overrides for "api.default.XXX" that they won't
cross-pollinate against the operator's wishes.

Fixes #6159
2019-08-01 22:03:34 -05:00
R.B. Boyer ad9e7b6ae9
connect: allow L7 routers to match on http methods (#6164)
Fixes #6158
2019-07-23 20:56:39 -05:00
R.B. Boyer 85cf2706e6
connect: change router syntax for matching query parameters to resemble the syntax for matching paths and headers for consistency. (#6163)
This is a breaking change, but only in the context of the beta series.
2019-07-23 20:55:26 -05:00
R.B. Boyer 1dbd92e091
connect: validate and test more of the L7 config entries (#6156) 2019-07-23 20:50:23 -05:00
R.B. Boyer d7a5158805
xds: allow http match criteria to be applied to routes on services using grpc protocols (#6149) 2019-07-17 14:07:08 -05:00
R.B. Boyer bcd2de3a2e
implement some missing service-router features and add more xDS testing (#6065)
- also implement OnlyPassing filters for non-gateway clusters
2019-07-12 14:16:21 -05:00
Jack Pearkes e6f1b78efb Make cluster names SNI always (#6081)
* Make cluster names SNI always

* Update some tests

* Ensure we check for prepared query types

* Use sni for route cluster names

* Proper mesh gateway mode defaulting when the discovery chain is used

* Ignore service splits from PatchSliceOfMaps

* Update some xds golden files for proper test output

* Allow for grpc/http listeners/cluster configs with the disco chain

* Update stats expectation
2019-07-08 12:48:48 +01:00
R.B. Boyer 4bdb690a25
activate most discovery chain features in xDS for envoy (#6024) 2019-07-01 22:10:51 -05:00
Paul Banks 1909a95118 xDS Server Implementation (#4731)
* Vendor updates for gRPC and xDS server

* xDS server implementation for serving Envoy as a Connect proxy

* Address initial review comments

* consistent envoy package aliases; typos fixed; override TLS and authz for custom listeners

* Moar Typos

* Moar typos
2018-10-10 16:55:34 +01:00