* docs: document behaviour of tls.https.verify_outgoing
At first it's not clear what verify_outgoing would do for the https
listener as it seems like Consul agent's don't make https requests. Upon
further investigation, it's clear that Consul agents do make https
requests in the following scenarios:
- to implement watches
- to perform checks
In the first scenario, this setting is used here:
a1c8d4dd19/agent/config/runtime.go (L1725)
In the second scenario, it's actually the internal_rpc setting that is
used:
a1c8d4dd19/tlsutil/config.go (L903)
* Update website/content/docs/agent/config/config-files.mdx
Co-authored-by: Jeff Boruszak <104028618+boruszak@users.noreply.github.com>
---------
Co-authored-by: David Yu <dyu@hashicorp.com>
Co-authored-by: Jeff Boruszak <104028618+boruszak@users.noreply.github.com>
* Update cache section for certain API calls
Providing more detail to the cache section to address behavior of API calls using streaming backend. This will help users understand that when '?index' is used and '?cached' is not, caching to servers will be bypassed, causing entry_fetch_max_burst and entry_fetch_rate to not be used in this scenario.
* Update website/content/docs/agent/config/config-files.mdx
Co-authored-by: Jeff Boruszak <104028618+boruszak@users.noreply.github.com>
---------
Co-authored-by: Jeff Boruszak <104028618+boruszak@users.noreply.github.com>
* DNS token doc updates
Review feedback
Update website/content/commands/acl/set-agent-token.mdx
Co-authored-by: Jared Kirschner <85913323+jkirschner-hashicorp@users.noreply.github.com>
Update dns token doc to link to policy templates
* PR feedback updates
* docs: Update locality-aware routing docs
- Align locality-aware routing documentation to the recommended use of the
feature and incorporate engineer feedback.
- Remove docs for unreleased multi-cluster failover feature.
- Fix minor typos and formatting in examples.
* docs: Fix rate limit docs typo
Prior to the introduction of this configuration, grpc keepalive messages were
sent after 2 hours of inactivity on the stream. This posed issues in various
scenarios where the server-side xds connection balancing was unaware that envoy
instances were uncleanly killed / force-closed, since the connections would
only be cleaned up after ~5 minutes of TCP timeouts occurred. Setting this
config to a 30 second interval with a 20 second timeout ensures that at most,
it should take up to 50 seconds for a dead xds connection to be closed.
* updated nav; renamed L7 traffic folder
* Added locality-aware routing to traffic mgmt overview
* Added route to local upstreams topic
* Updated agent configuration reference
* Added locality param to services conf ref
* Added locality param to conf entries
* mentioned traffic management in proxies overview
* added locality-aware to failover overview
* added docs for service rate limiting
* updated service defaults conf entry
* Apply suggestions from code review
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
* Apply suggestions from code review
Co-authored-by: Jeff Boruszak <104028618+boruszak@users.noreply.github.com>
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
* updated links and added redirects
---------
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: Jeff Boruszak <104028618+boruszak@users.noreply.github.com>
* first commit; reformat PD conf entry
* updated proxies overview page
* added Deploy SM proxy usage and removed reg index
* moved sidecar proxy usage to main proxy folder
* recast sidecar reg page as Deploy sidecar services
* fix typos
* recast SM reg as conf reference- set the sidebar
* add redirects
* fix links
* add PD conf entry usage to appropro pages
* edits to proxy conf ref
* fix links on index page
* example command to write PD conf entry
* updated links to old SM proxy reg page
* updated links to sidecar service reg page
* tryna fix front matter issues
* Apply suggestions from code review
Co-authored-by: Ronald <roncodingenthusiast@users.noreply.github.com>
* added paragraph about SM proxies to overivew
* Apply suggestions from code review
Co-authored-by: Jeff Boruszak <104028618+boruszak@users.noreply.github.com>
---------
Co-authored-by: Ronald <roncodingenthusiast@users.noreply.github.com>
Co-authored-by: Jeff Boruszak <104028618+boruszak@users.noreply.github.com>
* fix broken link caught in weekly report
* Apply suggestions from code review
Co-authored-by: Jeff Boruszak <104028618+boruszak@users.noreply.github.com>
---------
Co-authored-by: Jeff Boruszak <104028618+boruszak@users.noreply.github.com>
* replaced ordered list of rate limit ops with flow diagram
* made diagram font bigger
* updated colors for dark mode img
* fixed typo
* recentered dark mode image
* Apply suggestions from code review
Co-authored-by: Jeff Boruszak <104028618+boruszak@users.noreply.github.com>
---------
Co-authored-by: Jeff Boruszak <104028618+boruszak@users.noreply.github.com>
* add enterprise notes for IP-based rate limits
* Apply suggestions from code review
Co-authored-by: Tu Nguyen <im2nguyen@users.noreply.github.com>
Co-authored-by: David Yu <dyu@hashicorp.com>
* added bolded 'Enterprise' in list items.
---------
Co-authored-by: Tu Nguyen <im2nguyen@users.noreply.github.com>
Co-authored-by: David Yu <dyu@hashicorp.com>
* agent: configure server lastseen timestamp
Signed-off-by: Dan Bond <danbond@protonmail.com>
* use correct config
Signed-off-by: Dan Bond <danbond@protonmail.com>
* add comments
Signed-off-by: Dan Bond <danbond@protonmail.com>
* use default age in test golden data
Signed-off-by: Dan Bond <danbond@protonmail.com>
* add changelog
Signed-off-by: Dan Bond <danbond@protonmail.com>
* fix runtime test
Signed-off-by: Dan Bond <danbond@protonmail.com>
* agent: add server_metadata
Signed-off-by: Dan Bond <danbond@protonmail.com>
* update comments
Signed-off-by: Dan Bond <danbond@protonmail.com>
* correctly check if metadata file does not exist
Signed-off-by: Dan Bond <danbond@protonmail.com>
* follow instructions for adding new config
Signed-off-by: Dan Bond <danbond@protonmail.com>
* add comments
Signed-off-by: Dan Bond <danbond@protonmail.com>
* update comments
Signed-off-by: Dan Bond <danbond@protonmail.com>
* Update agent/agent.go
Co-authored-by: Dan Upton <daniel@floppy.co>
* agent/config: add validation for duration with min
Signed-off-by: Dan Bond <danbond@protonmail.com>
* docs: add new server_rejoin_age_max config definition
Signed-off-by: Dan Bond <danbond@protonmail.com>
* agent: add unit test for checking server last seen
Signed-off-by: Dan Bond <danbond@protonmail.com>
* agent: log continually for 60s before erroring
Signed-off-by: Dan Bond <danbond@protonmail.com>
* pr comments
Signed-off-by: Dan Bond <danbond@protonmail.com>
* remove unneeded todo
* agent: fix error message
Signed-off-by: Dan Bond <danbond@protonmail.com>
---------
Signed-off-by: Dan Bond <danbond@protonmail.com>
Co-authored-by: Dan Upton <daniel@floppy.co>
Remove outdated usage of "Consul Connect" instead of Consul service mesh.
The connect subsystem in Consul provides Consul's service mesh capabilities.
However, the term "Consul Connect" should not be used as an alternative to
the name "Consul service mesh".
This is part of an effort to raise awareness that you need to monitor
your mesh CA if coming from an external source as you'll need to manage
the rotation.
* Fix broken links in Consul docs
* more broken link fixes
* more 404 fixes
* 404 fixes
* broken link fix
---------
Co-authored-by: Tu Nguyen <im2nguyen@users.noreply.github.com>
* converted main services page to services overview page
* set up services usage dirs
* added Define Services usage page
* converted health checks everything page to Define Health Checks usage page
* added Register Services and Nodes usage page
* converted Query with DNS to Discover Services and Nodes Overview page
* added Configure DNS Behavior usage page
* added Enable Static DNS Lookups usage page
* added the Enable Dynamic Queries DNS Queries usage page
* added the Configuration dir and overview page - may not need the overview, tho
* fixed the nav from previous commit
* added the Services Configuration Reference page
* added Health Checks Configuration Reference page
* updated service defaults configuraiton entry to new configuration ref format
* fixed some bad links found by checker
* more bad links found by checker
* another bad link found by checker
* converted main services page to services overview page
* set up services usage dirs
* added Define Services usage page
* converted health checks everything page to Define Health Checks usage page
* added Register Services and Nodes usage page
* converted Query with DNS to Discover Services and Nodes Overview page
* added Configure DNS Behavior usage page
* added Enable Static DNS Lookups usage page
* added the Enable Dynamic Queries DNS Queries usage page
* added the Configuration dir and overview page - may not need the overview, tho
* fixed the nav from previous commit
* added the Services Configuration Reference page
* added Health Checks Configuration Reference page
* updated service defaults configuraiton entry to new configuration ref format
* fixed some bad links found by checker
* more bad links found by checker
* another bad link found by checker
* fixed cross-links between new topics
* updated links to the new services pages
* fixed bad links in scale file
* tweaks to titles and phrasing
* fixed typo in checks.mdx
* started updating the conf ref to latest template
* update SD conf ref to match latest CT standard
* Apply suggestions from code review
Co-authored-by: Eddie Rowe <74205376+eddie-rowe@users.noreply.github.com>
* remove previous version of the checks page
* fixed cross-links
* Apply suggestions from code review
Co-authored-by: Eddie Rowe <74205376+eddie-rowe@users.noreply.github.com>
---------
Co-authored-by: Eddie Rowe <74205376+eddie-rowe@users.noreply.github.com>
* Add WAL documentation. Also fix some minor metrics registration details
* Add tests to verify metrics are registered correctly
* refactor and move wal docs
* Updates to the WAL overview page
* updates to enable WAL usage topic
* updates to the monitoring WAL backend topic
* updates for revert WAL topic
* a few tweaks to overview and udpated metadescriptions
* Apply suggestions from code review
Co-authored-by: Paul Banks <pbanks@hashicorp.com>
* make revert docs consistent with enable
* Apply suggestions from code review
Co-authored-by: Paul Banks <pbanks@hashicorp.com>
* address feedback
* address final feedback
* Apply suggestions from code review
Co-authored-by: Jeff Boruszak <104028618+boruszak@users.noreply.github.com>
---------
Co-authored-by: Paul Banks <pbanks@hashicorp.com>
Co-authored-by: trujillo-adam <ajosetru@gmail.com>
Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com>
Co-authored-by: Jeff Boruszak <104028618+boruszak@users.noreply.github.com>
* remove legacy tokens
* Update test comment
Co-authored-by: Paul Glass <pglass@hashicorp.com>
* fix imports
* update docs for additional CLI changes
* add test case for anonymous token
* set deprecated api fields to json ignore and fix patch errors
* update changelog to breaking-change
* fix import
* update api docs to remove legacy reference
* fix docs nav data
---------
Co-authored-by: Paul Glass <pglass@hashicorp.com>
Eric Haberkorn