17 Commits (3b6d5e382ad6e26908ff37b47c542dde86106c18)

Author	SHA1	Message	Date
Pierre Souchay	0e907f5aa8	Support for maximum size for Output of checks (#5233) ... * Support for maximum size for Output of checks This PR allows users to limit the size of output produced by checks at the agent and check level. When set at the agent level, it will limit the output for all checks monitored by the agent. When set at the check level, it can override the agent max for a specific check but only if it is lower than the agent max. Default value is 4k, and input must be at least 1.	5 years ago
Hans Hasselberg	d35824b1fa	default to tls 1.2 as promised. (#5340)	6 years ago
Matt Keeler	18b29c45c4	New ACLs (#4791) ... This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.	6 years ago
Paul Banks	8336b5e6b9	XDS Server Config (#4730) ... * Config for the coming XDS server * Default gRPC to 8502 for -dev mode; Re-merge the command Info output that shows gRPC.	6 years ago
Paul Banks	1e7eace066	Add SidecarService Syntax sugar to Service Definition (#4686) ... * Added new Config for SidecarService in ServiceDefinitions. * WIP: all the code needed for SidecarService is written... none of it is tested other than config :). Need API updates too. * Test coverage for the new sidecarServiceFromNodeService method. * Test API registratrion with SidecarService * Recursive Key Translation 🤦 * Add tests for nested sidecar defintion arrays to ensure they are translated correctly * Use dedicated internal state rather than Service Meta for tracking sidecars for deregistration. Add tests for deregistration. * API struct for agent register. No other endpoint should be affected yet. * Additional test cases to cover updates to API registrations	6 years ago
Matt Keeler	0e0227792b	Gossip tuneables (#4444) ... Expose a few gossip tuneables for both lan and wan interfaces gossip_nodes gossip_interval probe_timeout probe_interval retransmit_mult suspicion_mult	6 years ago
Kyle Havlovitz	bc997688e3	connect/ca: update Consul provider to use new cross-sign CSR method	7 years ago
Kyle Havlovitz	6a2fc00997	connect/ca: add URI SAN support to the Vault provider	7 years ago
Mitchell Hashimoto	927b45bf91	agent/config: move ports to `ports` structure, update docs	7 years ago
Mitchell Hashimoto	9a62bce03b	agent/config: default connect enabled in dev mode ... This enables `consul agent -dev` to begin using Connect features with the built-in CA. I think this is expected behavior since you can imagine that new users would want to try. There is no real downside since we're just using the built-in CA.	7 years ago
Pierre Souchay	0b7f620dc6	Allow to control the number of A/AAAA Record returned by DNS ... This allows to have randomized resource records (i.e. each answer contains only one IP, but the IP changes every request) for A, AAAA records. It will fix https://github.com/hashicorp/consul/issues/3355 and https://github.com/hashicorp/consul/issues/3937 See https://github.com/hashicorp/consul/issues/3937#issuecomment-370610509 for details. It basically add a new option called `a_record_limit` and will not return more than a_record_limit when performing A, AAAA or ANY DNS requests. The existing `udp_answer_limit` option is still working but should be considered as deprecated since it works only with DNS clients not supporting EDNS.	7 years ago
James Phillips	46742a5041	Adds TODOs referencing #3744.	7 years ago
James Phillips	2892f91d0b	Copies the autopilot settings from the runtime config. ... Fixes #3730	7 years ago
James Phillips	bb12368eac	Makes RPC handling more robust when rolling servers. (#3561) ... * Adds client-side retry for no leader errors. This paves over the case where the client was connected to the leader when it loses leadership. * Adds a configurable server RPC drain time and a fail-fast path for RPCs. When a server leaves it gets removed from the Raft configuration, so it will never know who the new leader server ends up being. Without this we'd be doomed to wait out the RPC hold timeout and then fail. This makes things fail a little quicker while a sever is draining, and since we added a client retry AND since the server doing this has already shut down and left the Serf LAN, clients should retry against some other server. * Makes the RPC hold timeout configurable. * Reorders struct members. * Sets the RPC hold timeout default for test servers. * Bumps the leave drain time up to 5 seconds. * Robustifies retries with a simpler client-side RPC hold. * Reverts untended delete.	7 years ago
Frank Schröder	e84c2b2edd	Metrics service prefix (#3498) ... * metrics: replace statsite_prefix with service_prefix The metrics prefix isn't statsite specific and is in fact used for all metrics providers. Since we are deprecating fields anyway we should fix this one as well. Fixes #3293 * Updates docs and sorts telemetry section. * Renames to "metrics_prefix" to disambiguate with Consul services. * Updates the change log.	7 years ago
James Phillips	a75a779469	Renames `enable_ui` to `ui` to keep compatibility with existing configs.	7 years ago
Frank Schröder	12216583a1	New config parser, HCL support, multiple bind addrs (#3480) ... * new config parser for agent This patch implements a new config parser for the consul agent which makes the following changes to the previous implementation: * add HCL support * all configuration fragments in tests and for default config are expressed as HCL fragments * HCL fragments can be provided on the command line so that they can eventually replace the command line flags. * HCL/JSON fragments are parsed into a temporary Config structure which can be merged using reflection (all values are pointers). The existing merge logic of overwrite for values and append for slices has been preserved. * A single builder process generates a typed runtime configuration for the agent. The new implementation is more strict and fails in the builder process if no valid runtime configuration can be generated. Therefore, additional validations in other parts of the code should be removed. The builder also pre-computes all required network addresses so that no address/port magic should be required where the configuration is used and should therefore be removed. * Upgrade github.com/hashicorp/hcl to support int64 * improve error messages * fix directory permission test * Fix rtt test * Fix ForceLeave test * Skip performance test for now until we know what to do * Update github.com/hashicorp/memberlist to update log prefix * Make memberlist use the default logger * improve config error handling * do not fail on non-existing data-dir * experiment with non-uniform timeouts to get a handle on stalled leader elections * Run tests for packages separately to eliminate the spurious port conflicts * refactor private address detection and unify approach for ipv4 and ipv6. Fixes #2825 * do not allow unix sockets for DNS * improve bind and advertise addr error handling * go through builder using test coverage * minimal update to the docs * more coverage tests fixed * more tests * fix makefile * cleanup * fix port conflicts with external port server 'porter' * stop test server on error * do not run api test that change global ENV concurrently with the other tests * Run remaining api tests concurrently * no need for retry with the port number service * monkey patch race condition in go-sockaddr until we understand why that fails * monkey patch hcl decoder race condidtion until we understand why that fails * monkey patch spurious errors in strings.EqualFold from here * add test for hcl decoder race condition. Run with go test -parallel 128 * Increase timeout again * cleanup * don't log port allocations by default * use base command arg parsing to format help output properly * handle -dc deprecation case in Build * switch autopilot.max_trailing_logs to int * remove duplicate test case * remove unused methods * remove comments about flag/config value inconsistencies * switch got and want around since the error message was misleading. * Removes a stray debug log. * Removes a stray newline in imports. * Fixes TestACL_Version8. * Runs go fmt. * Adds a default case for unknown address types. * Reoders and reformats some imports. * Adds some comments and fixes typos. * Reorders imports. * add unix socket support for dns later * drop all deprecated flags and arguments * fix wrong field name * remove stray node-id file * drop unnecessary patch section in test * drop duplicate test * add test for LeaveOnTerm and SkipLeaveOnInt in client mode * drop "bla" and add clarifying comment for the test * split up tests to support enterprise/non-enterprise tests * drop raft multiplier and derive values during build phase * sanitize runtime config reflectively and add test * detect invalid config fields * fix tests with invalid config fields * use different values for wan sanitiziation test * drop recursor in favor of recursors * allow dns_config.udp_answer_limit to be zero * make sure tests run on machines with multiple ips * Fix failing tests in a few more places by providing a bind address in the test * Gets rid of skipped TestAgent_CheckPerformanceSettings and adds case for builder. * Add porter to server_test.go to make tests there less flaky * go fmt	7 years ago