Reworks the sidecar controller to accept ComputedRoutes as an input and use it to generate appropriate ProxyStateTemplate resources containing L4/L7 mesh configuration.
The renaming of files from oss -> ce caused incorrect snapshots
to be created due to ce writes now happening prior to ent writes.
When this happens various entities will attempt to be restored
from the snapshot prior to a partition existing and will cause a
panic to occur.
* Refactors the leafcert package to not have a dependency on agent/consul and agent/cache to avoid import cycles. This way the xds controller can just import the leafcert package to use the leafcert manager.
The leaf cert logic in the controller:
* Sets up watches for leaf certs that are referenced in the ProxyStateTemplate (which generates the leaf certs too).
* Gets the leaf cert from the leaf cert cache
* Stores the leaf cert in the ProxyState that's pushed to xds
* For the cert watches, this PR also uses a bimapper + a thin wrapper to map leaf cert events to related ProxyStateTemplates
Since bimapper uses a resource.Reference or resource.ID to map between two resource types, I've created an internal type for a leaf certificate to use for the resource.Reference, since it's not a v2 resource.
The wrapper allows mapping events to resources (as opposed to mapping resources to resources)
The controller tests:
Unit: Ensure that we resolve leaf cert references
Lifecycle: Ensure that when the CA is updated, the leaf cert is as well
Also adds a new spiffe id type, and adds workload identity and workload identity URI to leaf certs. This is so certs are generated with the new workload identity based SPIFFE id.
* Pulls out some leaf cert test helpers into a helpers file so it
can be used in the xds controller tests.
* Wires up leaf cert manager dependency
* Support getting token from proxytracker
* Add workload identity spiffe id type to the authorize and sign functions
---------
Co-authored-by: John Murret <john.murret@hashicorp.com>
* mesh-controller: handle L4 protocols for a proxy without upstreams
* sidecar-controller: Support explicit destinations for L4 protocols and single ports.
* This controller generates and saves ProxyStateTemplate for sidecar proxies.
* It currently supports single-port L4 ports only.
* It keeps a cache of all destinations to make it easier to compute and retrieve destinations.
* It will update the status of the pbmesh.Upstreams resource if anything is invalid.
* endpoints-controller: add workload identity to the service endpoints resource
* small fixes
* review comments
* Address PR comments
* sidecar-proxy controller: Add support for transparent proxy
This currently does not support inferring destinations from intentions.
* PR review comments
* mesh-controller: handle L4 protocols for a proxy without upstreams
* sidecar-controller: Support explicit destinations for L4 protocols and single ports.
* This controller generates and saves ProxyStateTemplate for sidecar proxies.
* It currently supports single-port L4 ports only.
* It keeps a cache of all destinations to make it easier to compute and retrieve destinations.
* It will update the status of the pbmesh.Upstreams resource if anything is invalid.
* endpoints-controller: add workload identity to the service endpoints resource
* small fixes
* review comments
* Make sure endpoint refs route to mesh port instead of an app port
* Address PR comments
* fixing copyright
* tidy imports
* sidecar-proxy controller: Add support for transparent proxy
This currently does not support inferring destinations from intentions.
* tidy imports
* add copyright headers
* Prefix sidecar proxy test files with source and destination.
* Update controller_test.go
* NET-5132 - Configure multiport routing for connect proxies in TProxy mode
* formatting golden files
* reverting golden files and adding changes in manually. build implicit destinations still has some issues.
* fixing files that were incorrectly repeating the outbound listener
* PR comments
* extract AlpnProtocol naming convention to getAlpnProtocolFromPortName(portName)
* removing address level filtering.
* adding license to resources_test.go
---------
Co-authored-by: Iryna Shustava <iryna@hashicorp.com>
Co-authored-by: R.B. Boyer <rb@hashicorp.com>
Co-authored-by: github-team-consul-core <github-team-consul-core@hashicorp.com>
This commit adds support for transparent proxy to the sidecar proxy controller. As we do not yet support inferring destinations from intentions, this assumes that all services in the cluster are destinations.
* Add response header filters to http-route config entry definitions
* Map response header filters from config entry when constructing route destination
* Support response header modifiers at the service level as well
* Update protobuf definitions
* Update existing unit tests
* Add response filters to route consolidation logic
* Make existing unit tests more robust
* Add missing docstring
* Add changelog entry
* Add response filter modifiers to existing integration test
* Add more robust testing for response header modifiers in the discovery chain
* Add more robust testing for request header modifiers in the discovery chain
* Modify test to verify that service filter modifiers take precedence over rule filter modifiers
* [NET-5325] ACL templated policies support in tokens and roles
- Add API support for creating tokens/roles with templated-policies
- Add CLI support for creating tokens/roles with templated-policies
* adding changelog
* Fixes issues in setting status
* Update golden files for changes to xds generation to not use deprecated
methods
* Fixed default for validation of JWT for route
* This controller generates and saves ProxyStateTemplate for sidecar proxies.
* It currently supports single-port L4 ports only.
* It keeps a cache of all destinations to make it easier to compute and retrieve destinations.
* It will update the status of the pbmesh.Upstreams resource if anything is invalid.
* This commit also changes service endpoints to include workload identity. This made the implementation a bit easier as we don't need to look up as many workloads and instead rely on endpoints data.
This PR enables the GetEnvoyBootstrapParams endpoint to construct envoy bootstrap parameters from v2 catalog and mesh resources.
* Make bootstrap request and response parameters less specific to services so that we can re-use them for workloads or service instances.
* Remove ServiceKind from bootstrap params response. This value was unused previously and is not needed for V2.
* Make access logs generation generic so that we can generate them using v1 or v2 resources.
Add support for querying tokens by service name
The consul-k8s endpoints controller has a workflow where it fetches all tokens.
This is not performant for large clusters, where there may be a sizable number
of tokens. This commit attempts to alleviate that problem and introduces a new
way to query by the token's service name.
Fix issue where agentless endpoints would fail to populate after snapshot restore.
Fixes an issue that was introduced in #17775. This issue happens because
a long-lived pointer to the state store is held, which is unsafe to do.
Snapshot restorations will swap out this state store, meaning that the
proxycfg watches would break for agentless.
* Add the plumbing for APIGW JWT work
* Remove unneeded import
* Add deep equal function for HTTPMatch
* Added plumbing for status conditions
* Remove unneeded comment
* Fix comments
* Add calls in xds listener for apigateway to setup listener jwt auth
* Add Enabler interface to turn sink on/off
* Use h for hcpProviderImpl vars, fix PR feeback and fix errors
* Keep nil check in exporter and fix tests
* Clarify comment and fix function name
* Use disable instead of enable
* Fix errors nit in otlp_transform
* Add test for refreshInterval of updateConfig
* Add disabled field in MetricsConfig struct
* Fix PR feedback: improve comment and remove double colons
* Fix deps test which requires a maybe
* Update hcp-sdk-go to v0.61.0
* use disabled flag in telemetry_config.go
* Handle 4XX errors in telemetry_provider
* Fix deps test
* Check 4XX instead
* Run make go-mod-tidy
* Adding explicit MPL license for sub-package
This directory and its subdirectories (packages) contain files licensed with the MPLv2 `LICENSE` file in this directory and are intentionally licensed separately from the BSL `LICENSE` file at the root of this repository.
* Adding explicit MPL license for sub-package
This directory and its subdirectories (packages) contain files licensed with the MPLv2 `LICENSE` file in this directory and are intentionally licensed separately from the BSL `LICENSE` file at the root of this repository.
* Updating the license from MPL to Business Source License
Going forward, this project will be licensed under the Business Source License v1.1. Please see our blog post for more details at <Blog URL>, FAQ at www.hashicorp.com/licensing-faq, and details of the license at www.hashicorp.com/bsl.
* add missing license headers
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
* Update copyright file headers to BUSL-1.1
---------
Co-authored-by: hashicorp-copywrite[bot] <110428419+hashicorp-copywrite[bot]@users.noreply.github.com>
* Added oss config entries for Policy and JWT on APIGW
* Updated structs for config entry
* Updated comments, ran deep-copy
* Move JWT configuration into OSS file
* Add in the config entry OSS file for jwts
* Added changelog
* fixing proto spacing
* Moved to using manually written deep copy method
* Use pointers for override/default fields in apigw config entries
* Run gen scripts for changed types
* Add logging to locality policy application
In OSS, this is currently a no-op.
* Inherit locality when registering sidecars
When sidecar locality is not explicitly configured, inherit locality
from the proxied service.
* bump testcontainers-go from 0.22.0 and remove pinned go version in integ test
* go mod tidy
* Replace deprecated target.Authority with target.URL.Host
* OTElExporter now uses an EndpointProvider to discover the endpoint
* OTELSink uses a ConfigProvider to obtain filters and labels configuration
* improve tests for otel_sink
* Regex logic is moved into client for a method on the TelemetryConfig object
* Create a telemetry_config_provider and update deps to use it
* Fix conversion
* fix import newline
* Add logger to hcp client and move telemetry_config out of the client.go file
* Add a telemetry_config.go to refactor client.go
* Update deps
* update hcp deps test
* Modify telemetry_config_providers
* Check for nil filters
* PR review updates
* Fix comments and move around pieces
* Fix comments
* Remove context from client struct
* Moved ctx out of sink struct and fixed filters, added a test
* Remove named imports, use errors.New if not fformatting
* Remove HCP dependencies in telemetry package
* Add success metric and move lock only to grab the t.cfgHahs
* Update hash
* fix nits
* Create an equals method and add tests
* Improve telemetry_config_provider.go tests
* Add race test
* Add missing godoc
* Remove mock for MetricsClient
* Avoid goroutine test panics
* trying to kick CI lint issues by upgrading mod
* imprve test code and add hasher for testing
* Use structure logging for filters, fix error constants, and default to allow all regex
* removed hashin and modify logic to simplify
* Improve race test and fix PR feedback by removing hash equals and avoid testing the timer.Ticker logic, and instead unit test
* Ran make go-mod-tidy
* Use errtypes in the test
* Add changelog
* add safety check for exporter endpoint
* remove require.Contains by using error types, fix structure logging, and fix success metric typo in exporter
* Fixed race test to have changing config values
* Send success metric before modifying config
* Avoid the defer and move the success metric under
* [CC-5719] Add support for builtin global-read-only policy
* Add changelog
* Add read-only to docs
* Fix some minor issues.
* Change from ReplaceAll to Sprintf
* Change IsValidPolicy name to return an error instead of bool
* Fix PolicyList test
* Fix other tests
* Apply suggestions from code review
Co-authored-by: Paul Glass <pglass@hashicorp.com>
* Fix state store test for policy list.
* Fix naming issues
* Update acl/validation.go
Co-authored-by: Chris Thain <32781396+cthain@users.noreply.github.com>
* Update agent/consul/acl_endpoint.go
---------
Co-authored-by: Paul Glass <pglass@hashicorp.com>
Co-authored-by: Chris Thain <32781396+cthain@users.noreply.github.com>
Prevent partial application of Envoy extensions
Ensure that non-required extensions do not change xDS resources before
exiting on failure by cloning proto messages prior to applying each
extension.
To support this change, also move `CanApply` checks up a layer and make
them prior to attempting extension application, s.t. we avoid
unnecessary copies where extensions can't be applied.
Last, ensure that we do not allow panics from `CanApply` or `Extend`
checks to escape the attempted extension application.
* Fix topoloy intention with mixed connect-native/normal services.
If a service is registered twice, once with connect-native and once
without, the topology views would prune the existing intentions. This
change brings the code more in line with the transparent proxy behavior.
* Dedupe nodes in the ServiceTopology ui endpoint (like done with tags).
* Consider a service connect-native as soon as one instance is.
* api-gateway: subscribe to bound-api-gateway only after receiving api-gateway
This fixes a race condition due to our dependency on having the listener(s) from the api-gateway config entry in order to fully and properly process the resources on the bound-api-gateway config entry.
* Apply suggestions from code review
* Add changelog entry
### Description
<!-- Please describe why you're making this change, in plain English.
-->
- Currently the jwt-auth filter doesn't take into account the service
identity when validating jwt-auth, it only takes into account the path
and jwt provider during validation. This causes issues when multiple
source intentions restrict access to an endpoint with different JWT
providers.
- To fix these issues, rather than use the JWT auth filter for
validation, we use it in metadata mode and allow it to forward the
successful validated JWT token payload to the RBAC filter which will
make the decisions.
This PR ensures requests with and without JWT tokens successfully go
through the jwt-authn filter. The filter however only forwards the data
for successful/valid tokens. On the RBAC filter level, we check the
payload for claims and token issuer + existing rbac rules.
### Testing & Reproduction steps
<!--
* In the case of bugs, describe how to replicate
* If any manual tests were done, document the steps and the conditions
to replicate
* Call out any important/ relevant unit tests, e2e tests or integration
tests you have added or are adding
-->
- This test covers a multi level jwt requirements (requirements at top
level and permissions level). It also assumes you have envoy running,
you have a redis and a sidecar proxy service registered, and have a way
to generate jwks with jwt. I mostly use:
https://www.scottbrady91.com/tools/jwt for this.
- first write your proxy defaults
```
Kind = "proxy-defaults"
name = "global"
config {
protocol = "http"
}
```
- Create two providers
```
Kind = "jwt-provider"
Name = "auth0"
Issuer = "https://ronald.local"
JSONWebKeySet = {
Local = {
JWKS = "eyJrZXlzIjog....."
}
}
```
```
Kind = "jwt-provider"
Name = "okta"
Issuer = "https://ronald.local"
JSONWebKeySet = {
Local = {
JWKS = "eyJrZXlzIjogW3...."
}
}
```
- add a service intention
```
Kind = "service-intentions"
Name = "redis"
JWT = {
Providers = [
{
Name = "okta"
},
]
}
Sources = [
{
Name = "*"
Permissions = [{
Action = "allow"
HTTP = {
PathPrefix = "/workspace"
}
JWT = {
Providers = [
{
Name = "okta"
VerifyClaims = [
{
Path = ["aud"]
Value = "my_client_app"
},
{
Path = ["sub"]
Value = "5be86359073c434bad2da3932222dabe"
}
]
},
]
}
},
{
Action = "allow"
HTTP = {
PathPrefix = "/"
}
JWT = {
Providers = [
{
Name = "auth0"
},
]
}
}]
}
]
```
- generate 3 jwt tokens: 1 from auth0 jwks, 1 from okta jwks with
different claims than `/workspace` expects and 1 with correct claims
- connect to your envoy (change service and address as needed) to view
logs and potential errors. You can add: `-- --log-level debug` to see
what data is being forwarded
```
consul connect envoy -sidecar-for redis1 -grpc-addr 127.0.0.1:8502
```
- Make the following requests:
```
curl -s -H "Authorization: Bearer $Auth0_TOKEN" --insecure --cert leaf.cert --key leaf.key --cacert connect-ca.pem https://localhost:20000/workspace -v
RBAC filter denied
curl -s -H "Authorization: Bearer $Okta_TOKEN_with_wrong_claims" --insecure --cert leaf.cert --key leaf.key --cacert connect-ca.pem https://localhost:20000/workspace -v
RBAC filter denied
curl -s -H "Authorization: Bearer $Okta_TOKEN_with_correct_claims" --insecure --cert leaf.cert --key leaf.key --cacert connect-ca.pem https://localhost:20000/workspace -v
Successful request
```
### TODO
* [x] Update test coverage
* [ ] update integration tests (follow-up PR)
* [x] appropriate backport labels added
### Description
<!-- Please describe why you're making this change, in plain English.
-->
The mock is used in `http_ent_test` file which caused lint failures. For
OSS->ENT parity adding the same change here.
### Links
<!--
Include any links here that might be helpful for people reviewing your
PR (Tickets, GH issues, API docs, external benchmarks, tools docs, etc).
If there are none, feel free to delete this section.
Please be mindful not to leak any customer or confidential information.
HashiCorp employees may want to use our internal URL shortener to
obfuscate links.
-->
Identified in OSS->ENT [merge
PR](https://github.com/hashicorp/consul-enterprise/pull/6328)
### PR Checklist
* [ ] ~updated test coverage~
* [ ] ~external facing docs updated~
* [x] appropriate backport labels added
* [ ] ~not a security concern~
### Description
This is to correct a code problem because this assumes all segments, but
when you get to Enterprise, you can be in partition that is not the
default partition, in which case specifying all segments does not
validate and fails. This is to correct the setting of this filter with
`AllSegments` to `true` to only occur when in the the `default`
partition.
### Testing & Reproduction steps
<!--
* In the case of bugs, describe how to replicate
* If any manual tests were done, document the steps and the conditions
to replicate
* Call out any important/ relevant unit tests, e2e tests or integration
tests you have added or are adding
-->
### Links
<!--
Include any links here that might be helpful for people reviewing your
PR (Tickets, GH issues, API docs, external benchmarks, tools docs, etc).
If there are none, feel free to delete this section.
Please be mindful not to leak any customer or confidential information.
HashiCorp employees may want to use our internal URL shortener to
obfuscate links.
-->
### PR Checklist
* [ ] updated test coverage
* [ ] external facing docs updated
* [ ] appropriate backport labels added
* [ ] not a security concern
Updating RootPKIPath but not IntermediatePKIPath would not update
leaf signing certs with the new root. Unsure if this happens in practice
but manual testing showed it is a bug that would break mesh and agent
connections once the old root is pruned.
### Description
<!-- Please describe why you're making this change, in plain English.
-->
Dan had already started on this
[task](https://github.com/hashicorp/consul/pull/17849) which is needed
to start building the HTTP APIs. This just needed some cleanup to get it
ready for review.
Overview:
- Rename `internalResourceServiceClient` to
`insecureResourceServiceClient` for name consistency
- Configure a `secureResourceServiceClient` with auth enabled
### PR Checklist
* [ ] ~updated test coverage~
* [ ] ~external facing docs updated~
* [x] appropriate backport labels added
* [ ] ~not a security concern~
* update UINodes and UINodeInfo response with consul-version info added as NodeMeta, fetched from serf members
* update test cases TestUINodes, TestUINodeInfo
* added nil check for map
* add consul-version in local agent node metadata
* get consul version from serf member and add this as node meta in catalog register request
* updated ui mock response to include consul versions as node meta
* updated ui trans and added version as query param to node list route
* updates in ui templates to display consul version with filter and sorts
* updates in ui - model class, serializers,comparators,predicates for consul version feature
* added change log for Consul Version Feature
* updated to get version from consul service, if for some reason not available from serf
* updated changelog text
* updated dependent testcases
* multiselection version filter
* Update agent/consul/state/catalog.go
comments updated
Co-authored-by: Jared Kirschner <85913323+jkirschner-hashicorp@users.noreply.github.com>
---------
Co-authored-by: Jared Kirschner <85913323+jkirschner-hashicorp@users.noreply.github.com>
This PR fixes a bug that was introduced in:
https://github.com/hashicorp/consul/pull/16021
A user setting a protocol in proxy-defaults would cause tproxy implicit
upstreams to not honor the upstream service's protocol set in its
`ServiceDefaults.Protocol` field, and would instead always use the
proxy-defaults value.
Due to the fact that upstreams configured with "tcp" can successfully contact
upstream "http" services, this issue was not recognized until recently (a
proxy-defaults with "tcp" and a listening service with "http" would make
successful requests, but not the opposite).
As a temporary work-around, users experiencing this issue can explicitly set
the protocol on the `ServiceDefaults.UpstreamConfig.Overrides`, which should
take precedence.
The fix in this PR removes the proxy-defaults protocol from the wildcard
upstream that tproxy uses to configure implicit upstreams. When the protocol
was included, it would always overwrite the value during discovery chain
compilation, which was not correct. The discovery chain compiler also consumes
proxy defaults to determine the protocol, so simply excluding it from the
wildcard upstream config map resolves the issue.
* # This is a combination of 9 commits.
# This is the 1st commit message:
init without tests
# This is the commit message #2:
change log
# This is the commit message #3:
fix tests
# This is the commit message #4:
fix tests
# This is the commit message #5:
added tests
# This is the commit message #6:
change log breaking change
# This is the commit message #7:
removed breaking change
# This is the commit message #8:
fix test
# This is the commit message #9:
keeping the test behaviour same
* # This is a combination of 12 commits.
# This is the 1st commit message:
init without tests
# This is the commit message #2:
change log
# This is the commit message #3:
fix tests
# This is the commit message #4:
fix tests
# This is the commit message #5:
added tests
# This is the commit message #6:
change log breaking change
# This is the commit message #7:
removed breaking change
# This is the commit message #8:
fix test
# This is the commit message #9:
keeping the test behaviour same
# This is the commit message #10:
made enable debug atomic bool
# This is the commit message #11:
fix lint
# This is the commit message #12:
fix test true enable debug
* parent 10f500e895
author absolutelightning <ashesh.vidyut@hashicorp.com> 1687352587 +0530
committer absolutelightning <ashesh.vidyut@hashicorp.com> 1687352592 +0530
init without tests
change log
fix tests
fix tests
added tests
change log breaking change
removed breaking change
fix test
keeping the test behaviour same
made enable debug atomic bool
fix lint
fix test true enable debug
using enable debug in agent as atomic bool
test fixes
fix tests
fix tests
added update on correct locaiton
fix tests
fix reloadable config enable debug
fix tests
fix init and acl 403
* revert commit
* Ensure RSA keys are at least 2048 bits in length
* Add changelog
* update key length check for FIPS compliance
* Fix no new variables error and failing to return when error exists from
validating
* clean up code for better readability
* actually return value
* Fix a bug that wrongly trims domains when there is an overlap with DC name
Before this change, when DC name and domain/alt-domain overlap, the domain name incorrectly trimmed from the query.
Example:
Given: datacenter = dc-test, alt-domain = test.consul.
Querying for "test-node.node.dc-test.consul" will faile, because the
code was trimming "test.consul" instead of just ".consul"
This change, fixes the issue by adding dot (.) before trimming
* trimDomain: ensure domain trimmed without modyfing original domains
* update changelog
---------
Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
For consistency, resource type names must follow these rules:
- `Group` must be snake case, and in most cases a single word.
- `GroupVersion` must be lowercase, start with a "v" and end with a number.
- `Kind` must be pascal case.
These were chosen because they map to our protobuf type naming
conventions.
Update CA provider docs
Clarify that providers can differ between
primary and secondary datacenters
Provide a comparison chart for consul vs
vault CA providers
Loosen Vault CA provider validation for RootPKIPath
Update Vault CA provider documentation
* Reject inbound Prop Override patch with Services
Services filtering is only supported for outbound TrafficDirection patches.
* Improve Prop Override unexpected type validation
- Guard against additional invalid parent and target types
- Add specific error handling for Any fields (unsupported)
Fix issue with streaming service health watches.
This commit fixes an issue where the health streams were unaware of service
export changes. Whenever an exported-services config entry is modified, it is
effectively an ACL change.
The bug would be triggered by the following situation:
- no services are exported
- an upstream watch to service X is spawned
- the streaming backend filters out data for service X (due to lack of exports)
- service X is finally exported
In the situation above, the streaming backend does not trigger a refresh of its
data. This means that any events that were supposed to have been received prior
to the export are NOT backfilled, and the watches never see service X spawning.
We currently have decided to not trigger a stream refresh in this situation due
to the potential for a thundering herd effect (touching exports would cause a
re-fetch of all watches for that partition, potentially). Therefore, a local
blocking-query approach was added by this commit for agentless.
It's also worth noting that the streaming subscription is currently bypassed
most of the time with agentful, because proxycfg has a `req.Source.Node != ""`
which prevents the `streamingEnabled` check from passing. This means that while
agents should technically have this same issue, they don't experience it with
mesh health watches.
Note that this is a temporary fix that solves the issue for proxycfg, but not
service-discovery use cases.
* agent: remove agent cache dependency from service mesh leaf certificate management
This extracts the leaf cert management from within the agent cache.
This code was produced by the following process:
1. All tests in agent/cache, agent/cache-types, agent/auto-config,
agent/consul/servercert were run at each stage.
- The tests in agent matching .*Leaf were run at each stage.
- The tests in agent/leafcert were run at each stage after they
existed.
2. The former leaf cert Fetch implementation was extracted into a new
package behind a "fake RPC" endpoint to make it look almost like all
other cache type internals.
3. The old cache type was shimmed to use the fake RPC endpoint and
generally cleaned up.
4. I selectively duplicated all of Get/Notify/NotifyCallback/Prepopulate
from the agent/cache.Cache implementation over into the new package.
This was renamed as leafcert.Manager.
- Code that was irrelevant to the leaf cert type was deleted
(inlining blocking=true, refresh=false)
5. Everything that used the leaf cert cache type (including proxycfg
stuff) was shifted to use the leafcert.Manager instead.
6. agent/cache-types tests were moved and gently replumbed to execute
as-is against a leafcert.Manager.
7. Inspired by some of the locking changes from derek's branch I split
the fat lock into N+1 locks.
8. The waiter chan struct{} was eventually replaced with a
singleflight.Group around cache updates, which was likely the biggest
net structural change.
9. The awkward two layers or logic produced as a byproduct of marrying
the agent cache management code with the leaf cert type code was
slowly coalesced and flattened to remove confusion.
10. The .*Leaf tests from the agent package were copied and made to work
directly against a leafcert.Manager to increase direct coverage.
I have done a best effort attempt to port the previous leaf-cert cache
type's tests over in spirit, as well as to take the e2e-ish tests in the
agent package with Leaf in the test name and copy those into the
agent/leafcert package to get more direct coverage, rather than coverage
tangled up in the agent logic.
There is no net-new test coverage, just coverage that was pushed around
from elsewhere.
This includes prioritize by localities on disco chain targets rather than
resolvers, allowing different targets within the same partition to have
different policies.
* Add header filter to api-gateway xDS golden test
* Stop adding all header filters to virtual host when generating xDS for api-gateway
* Regenerate xDS golden file for api-gateway w/ header filter
Ensure that the embedded api struct is properly parsed when
deserializing config containing a set ResourceFilter.Services field.
Also enhance existing integration test to guard against bugs and
exercise this field.
TLDR with many modules the versions included in each diverged quite a bit. Attempting to use Go Workspaces produces a bunch of errors.
This commit:
1. Fixes envoy-library-references.sh to work again
2. Ensures we are pulling in go-control-plane@v0.11.0 everywhere (previously it was at that version in some modules and others were much older)
3. Remove one usage of golang/protobuf that caused us to have a direct dependency on it.
4. Remove deprecated usage of the Endpoint field in the grpc resolver.Target struct. The current version of grpc (v1.55.0) has removed that field and recommended replacement with URL.Opaque and calls to the Endpoint() func when needing to consume the previous field.
4. `go work init <all the paths to go.mod files>` && `go work sync`. This syncrhonized versions of dependencies from the main workspace/root module to all submodules
5. Updated .gitignore to ignore the go.work and go.work.sum files. This seems to be standard practice at the moment.
6. Update doc comments in protoc-gen-consul-rate-limit to be go fmt compatible
7. Upgraded makefile infra to perform linting, testing and go mod tidy on all modules in a flexible manner.
8. Updated linter rules to prevent usage of golang/protobuf
9. Updated a leader peering test to account for an extra colon in a grpc error message.
When UpstreamEnvoyExtender was introduced, some code was left duplicated
between it and BasicEnvoyExtender. One path in that code panics when a
TProxy listener patch is attempted due to no upstream data in
RuntimeConfig matching the local service (which would only happen in
rare cases).
Instead, we can remove the special handling of upstream VIPs from
BasicEnvoyExtender entirely, greatly simplifying the listener filter
patch code and avoiding the panic. UpstreamEnvoyExtender, which needs
this code to function, is modified to ensure a panic does not occur.
This also fixes a second regression in which the Lua extension was not
applied to TProxy outbound listeners.
Sameness groups with default-for-failover enabled did not function properly with
tproxy whenever all instances of the service disappeared from the local cluster.
This occured, because there were no corresponding resolvers (due to the implicit
failover policy) which caused VIPs to be deallocated.
This ticket expands upon the VIP allocations so that both service-defaults and
service-intentions (without destination wildcards) will ensure that the virtual
IP exists.
This commit only contains the OSS PR (datacenter query param support).
A separate enterprise PR adds support for ap and namespace query params.
Resources in Consul can exists within scopes such as datacenters, cluster
peers, admin partitions, and namespaces. You can refer to those resources from
interfaces such as the CLI, HTTP API, DNS, and configuration files.
Some scope levels have consistent naming: cluster peers are always referred to
as "peer".
Other scope levels use a short-hand in DNS lookups...
- "ns" for namespace
- "ap" for admin partition
- "dc" for datacenter
...But use long-hand in CLI commands:
- "namespace" for namespace
- "partition" for admin partition
- and "datacenter"
However, HTTP API query parameters do not follow a consistent pattern,
supporting short-hand for some scopes but long-hand for others:
- "ns" for namespace
- "partition" for admin partition
- and "dc" for datacenter.
This inconsistency is confusing, especially for users who have been exposed to
providing scope names through another interface such as CLI or DNS queries.
This commit improves UX by consistently supporting both short-hand and
long-hand forms of the namespace, partition, and datacenter scopes in HTTP API
query parameters.
* add upstream service targeting to property override extension
* Also add baseline goldens for service specific property override extension.
* Refactor the extension framework to put more logic into the templates.
* fix up the golden tests
* Move hcp client to subpackage hcpclient (#16800)
* [HCP Observability] New MetricsClient (#17100)
* Client configured with TLS using HCP config and retry/throttle
* Add tests and godoc for metrics client
* close body after request
* run go mod tidy
* Remove one abstraction to use the config from deps
* Address PR feedback
* remove clone
* Extract CloudConfig and mock for future PR
* Switch to hclog.FromContext
* [HCP Observability] OTELExporter (#17128)
* Client configured with TLS using HCP config and retry/throttle
* run go mod tidy
* Remove one abstraction to use the config from deps
* Address PR feedback
* Client configured with TLS using HCP config and retry/throttle
* run go mod tidy
* Create new OTELExporter which uses the MetricsClient
Add transform because the conversion is in an /internal package
* Fix lint error
* early return when there are no metrics
* Add NewOTELExporter() function
* Downgrade to metrics SDK version: v1.15.0-rc.1
* Fix imports
* fix small nits with comments and url.URL
* Fix tests by asserting actual error for context cancellation, fix parallel, and make mock more versatile
* Cleanup error handling and clarify empty metrics case
* Fix input/expected naming in otel_transform_test.go
* add comment for metric tracking
* Add a general isEmpty method
* Add clear error types
* update to latest version 1.15.0 of OTEL
* [HCP Observability] OTELSink (#17159)
* Client configured with TLS using HCP config and retry/throttle
* run go mod tidy
* Remove one abstraction to use the config from deps
* Address PR feedback
* Client configured with TLS using HCP config and retry/throttle
* run go mod tidy
* Create new OTELExporter which uses the MetricsClient
Add transform because the conversion is in an /internal package
* Fix lint error
* early return when there are no metrics
* Add NewOTELExporter() function
* Downgrade to metrics SDK version: v1.15.0-rc.1
* Fix imports
* fix small nits with comments and url.URL
* Fix tests by asserting actual error for context cancellation, fix parallel, and make mock more versatile
* Cleanup error handling and clarify empty metrics case
* Fix input/expected naming in otel_transform_test.go
* add comment for metric tracking
* Add a general isEmpty method
* Add clear error types
* update to latest version 1.15.0 of OTEL
* Client configured with TLS using HCP config and retry/throttle
* run go mod tidy
* Remove one abstraction to use the config from deps
* Address PR feedback
* Initialize OTELSink with sync.Map for all the instrument stores.
* Moved PeriodicReader init to NewOtelReader function. This allows us to use a ManualReader for tests.
* Switch to mutex instead of sync.Map to avoid type assertion
* Add gauge store
* Clarify comments
* return concrete sink type
* Fix lint errors
* Move gauge store to be within sink
* Use context.TODO,rebase and clenaup opts handling
* Rebase onto otl exporter to downgrade metrics API to v1.15.0-rc.1
* Fix imports
* Update to latest stable version by rebasing on cc-4933, fix import, remove mutex init, fix opts error messages and use logger from ctx
* Add lots of documentation to the OTELSink
* Fix gauge store comment and check ok
* Add select and ctx.Done() check to gauge callback
* use require.Equal for attributes
* Fixed import naming
* Remove float64 calls and add a NewGaugeStore method
* Change name Store to Set in gaugeStore, add concurrency tests in both OTELSink and gauge store
* Generate 100 gauge operations
* Seperate the labels into goroutines in sink test
* Generate kv store for the test case keys to avoid using uuid
* Added a race test with 300 samples for OTELSink
* Do not pass in waitgroup and use error channel instead.
* Using SHA 7dea2225a218872e86d2f580e82c089b321617b0 to avoid build failures in otel
* Fix nits
* [HCP Observability] Init OTELSink in Telemetry (#17162)
* Move hcp client to subpackage hcpclient (#16800)
* [HCP Observability] New MetricsClient (#17100)
* Client configured with TLS using HCP config and retry/throttle
* Add tests and godoc for metrics client
* close body after request
* run go mod tidy
* Remove one abstraction to use the config from deps
* Address PR feedback
* remove clone
* Extract CloudConfig and mock for future PR
* Switch to hclog.FromContext
* [HCP Observability] New MetricsClient (#17100)
* Client configured with TLS using HCP config and retry/throttle
* Add tests and godoc for metrics client
* close body after request
* run go mod tidy
* Remove one abstraction to use the config from deps
* Address PR feedback
* remove clone
* Extract CloudConfig and mock for future PR
* Switch to hclog.FromContext
* [HCP Observability] New MetricsClient (#17100)
* Client configured with TLS using HCP config and retry/throttle
* Add tests and godoc for metrics client
* close body after request
* run go mod tidy
* Remove one abstraction to use the config from deps
* Address PR feedback
* remove clone
* Extract CloudConfig and mock for future PR
* Switch to hclog.FromContext
* Client configured with TLS using HCP config and retry/throttle
* run go mod tidy
* Remove one abstraction to use the config from deps
* Address PR feedback
* Client configured with TLS using HCP config and retry/throttle
* run go mod tidy
* Create new OTELExporter which uses the MetricsClient
Add transform because the conversion is in an /internal package
* Fix lint error
* early return when there are no metrics
* Add NewOTELExporter() function
* Downgrade to metrics SDK version: v1.15.0-rc.1
* Fix imports
* fix small nits with comments and url.URL
* Fix tests by asserting actual error for context cancellation, fix parallel, and make mock more versatile
* Cleanup error handling and clarify empty metrics case
* Fix input/expected naming in otel_transform_test.go
* add comment for metric tracking
* Add a general isEmpty method
* Add clear error types
* update to latest version 1.15.0 of OTEL
* Client configured with TLS using HCP config and retry/throttle
* run go mod tidy
* Remove one abstraction to use the config from deps
* Address PR feedback
* Initialize OTELSink with sync.Map for all the instrument stores.
* Moved PeriodicReader init to NewOtelReader function. This allows us to use a ManualReader for tests.
* Switch to mutex instead of sync.Map to avoid type assertion
* Add gauge store
* Clarify comments
* return concrete sink type
* Fix lint errors
* Move gauge store to be within sink
* Use context.TODO,rebase and clenaup opts handling
* Rebase onto otl exporter to downgrade metrics API to v1.15.0-rc.1
* Fix imports
* Update to latest stable version by rebasing on cc-4933, fix import, remove mutex init, fix opts error messages and use logger from ctx
* Add lots of documentation to the OTELSink
* Fix gauge store comment and check ok
* Add select and ctx.Done() check to gauge callback
* use require.Equal for attributes
* Fixed import naming
* Remove float64 calls and add a NewGaugeStore method
* Change name Store to Set in gaugeStore, add concurrency tests in both OTELSink and gauge store
* Generate 100 gauge operations
* Seperate the labels into goroutines in sink test
* Generate kv store for the test case keys to avoid using uuid
* Added a race test with 300 samples for OTELSink
* [HCP Observability] OTELExporter (#17128)
* Client configured with TLS using HCP config and retry/throttle
* run go mod tidy
* Remove one abstraction to use the config from deps
* Address PR feedback
* Client configured with TLS using HCP config and retry/throttle
* run go mod tidy
* Create new OTELExporter which uses the MetricsClient
Add transform because the conversion is in an /internal package
* Fix lint error
* early return when there are no metrics
* Add NewOTELExporter() function
* Downgrade to metrics SDK version: v1.15.0-rc.1
* Fix imports
* fix small nits with comments and url.URL
* Fix tests by asserting actual error for context cancellation, fix parallel, and make mock more versatile
* Cleanup error handling and clarify empty metrics case
* Fix input/expected naming in otel_transform_test.go
* add comment for metric tracking
* Add a general isEmpty method
* Add clear error types
* update to latest version 1.15.0 of OTEL
* Do not pass in waitgroup and use error channel instead.
* Using SHA 7dea2225a218872e86d2f580e82c089b321617b0 to avoid build failures in otel
* Rebase onto otl exporter to downgrade metrics API to v1.15.0-rc.1
* Initialize OTELSink with sync.Map for all the instrument stores.
* Added telemetry agent to client and init sink in deps
* Fixed client
* Initalize sink in deps
* init sink in telemetry library
* Init deps before telemetry
* Use concrete telemetry.OtelSink type
* add /v1/metrics
* Avoid returning err for telemetry init
* move sink init within the IsCloudEnabled()
* Use HCPSinkOpts in deps instead
* update golden test for configuration file
* Switch to using extra sinks in the telemetry library
* keep name MetricsConfig
* fix log in verifyCCMRegistration
* Set logger in context
* pass around MetricSink in deps
* Fix imports
* Rebased onto otel sink pr
* Fix URL in test
* [HCP Observability] OTELSink (#17159)
* Client configured with TLS using HCP config and retry/throttle
* run go mod tidy
* Remove one abstraction to use the config from deps
* Address PR feedback
* Client configured with TLS using HCP config and retry/throttle
* run go mod tidy
* Create new OTELExporter which uses the MetricsClient
Add transform because the conversion is in an /internal package
* Fix lint error
* early return when there are no metrics
* Add NewOTELExporter() function
* Downgrade to metrics SDK version: v1.15.0-rc.1
* Fix imports
* fix small nits with comments and url.URL
* Fix tests by asserting actual error for context cancellation, fix parallel, and make mock more versatile
* Cleanup error handling and clarify empty metrics case
* Fix input/expected naming in otel_transform_test.go
* add comment for metric tracking
* Add a general isEmpty method
* Add clear error types
* update to latest version 1.15.0 of OTEL
* Client configured with TLS using HCP config and retry/throttle
* run go mod tidy
* Remove one abstraction to use the config from deps
* Address PR feedback
* Initialize OTELSink with sync.Map for all the instrument stores.
* Moved PeriodicReader init to NewOtelReader function. This allows us to use a ManualReader for tests.
* Switch to mutex instead of sync.Map to avoid type assertion
* Add gauge store
* Clarify comments
* return concrete sink type
* Fix lint errors
* Move gauge store to be within sink
* Use context.TODO,rebase and clenaup opts handling
* Rebase onto otl exporter to downgrade metrics API to v1.15.0-rc.1
* Fix imports
* Update to latest stable version by rebasing on cc-4933, fix import, remove mutex init, fix opts error messages and use logger from ctx
* Add lots of documentation to the OTELSink
* Fix gauge store comment and check ok
* Add select and ctx.Done() check to gauge callback
* use require.Equal for attributes
* Fixed import naming
* Remove float64 calls and add a NewGaugeStore method
* Change name Store to Set in gaugeStore, add concurrency tests in both OTELSink and gauge store
* Generate 100 gauge operations
* Seperate the labels into goroutines in sink test
* Generate kv store for the test case keys to avoid using uuid
* Added a race test with 300 samples for OTELSink
* Do not pass in waitgroup and use error channel instead.
* Using SHA 7dea2225a218872e86d2f580e82c089b321617b0 to avoid build failures in otel
* Fix nits
* pass extraSinks as function param instead
* Add default interval as package export
* remove verifyCCM func
* Add clusterID
* Fix import and add t.Parallel() for missing tests
* Kick Vercel CI
* Remove scheme from endpoint path, and fix error logging
* return metrics.MetricSink for sink method
* Update SDK
* [HCP Observability] Metrics filtering and Labels in Go Metrics sink (#17184)
* Move hcp client to subpackage hcpclient (#16800)
* [HCP Observability] New MetricsClient (#17100)
* Client configured with TLS using HCP config and retry/throttle
* Add tests and godoc for metrics client
* close body after request
* run go mod tidy
* Remove one abstraction to use the config from deps
* Address PR feedback
* remove clone
* Extract CloudConfig and mock for future PR
* Switch to hclog.FromContext
* [HCP Observability] New MetricsClient (#17100)
* Client configured with TLS using HCP config and retry/throttle
* Add tests and godoc for metrics client
* close body after request
* run go mod tidy
* Remove one abstraction to use the config from deps
* Address PR feedback
* remove clone
* Extract CloudConfig and mock for future PR
* Switch to hclog.FromContext
* [HCP Observability] New MetricsClient (#17100)
* Client configured with TLS using HCP config and retry/throttle
* Add tests and godoc for metrics client
* close body after request
* run go mod tidy
* Remove one abstraction to use the config from deps
* Address PR feedback
* remove clone
* Extract CloudConfig and mock for future PR
* Switch to hclog.FromContext
* Client configured with TLS using HCP config and retry/throttle
* run go mod tidy
* Remove one abstraction to use the config from deps
* Address PR feedback
* Client configured with TLS using HCP config and retry/throttle
* run go mod tidy
* Create new OTELExporter which uses the MetricsClient
Add transform because the conversion is in an /internal package
* Fix lint error
* early return when there are no metrics
* Add NewOTELExporter() function
* Downgrade to metrics SDK version: v1.15.0-rc.1
* Fix imports
* fix small nits with comments and url.URL
* Fix tests by asserting actual error for context cancellation, fix parallel, and make mock more versatile
* Cleanup error handling and clarify empty metrics case
* Fix input/expected naming in otel_transform_test.go
* add comment for metric tracking
* Add a general isEmpty method
* Add clear error types
* update to latest version 1.15.0 of OTEL
* Client configured with TLS using HCP config and retry/throttle
* run go mod tidy
* Remove one abstraction to use the config from deps
* Address PR feedback
* Initialize OTELSink with sync.Map for all the instrument stores.
* Moved PeriodicReader init to NewOtelReader function. This allows us to use a ManualReader for tests.
* Switch to mutex instead of sync.Map to avoid type assertion
* Add gauge store
* Clarify comments
* return concrete sink type
* Fix lint errors
* Move gauge store to be within sink
* Use context.TODO,rebase and clenaup opts handling
* Rebase onto otl exporter to downgrade metrics API to v1.15.0-rc.1
* Fix imports
* Update to latest stable version by rebasing on cc-4933, fix import, remove mutex init, fix opts error messages and use logger from ctx
* Add lots of documentation to the OTELSink
* Fix gauge store comment and check ok
* Add select and ctx.Done() check to gauge callback
* use require.Equal for attributes
* Fixed import naming
* Remove float64 calls and add a NewGaugeStore method
* Change name Store to Set in gaugeStore, add concurrency tests in both OTELSink and gauge store
* Generate 100 gauge operations
* Seperate the labels into goroutines in sink test
* Generate kv store for the test case keys to avoid using uuid
* Added a race test with 300 samples for OTELSink
* [HCP Observability] OTELExporter (#17128)
* Client configured with TLS using HCP config and retry/throttle
* run go mod tidy
* Remove one abstraction to use the config from deps
* Address PR feedback
* Client configured with TLS using HCP config and retry/throttle
* run go mod tidy
* Create new OTELExporter which uses the MetricsClient
Add transform because the conversion is in an /internal package
* Fix lint error
* early return when there are no metrics
* Add NewOTELExporter() function
* Downgrade to metrics SDK version: v1.15.0-rc.1
* Fix imports
* fix small nits with comments and url.URL
* Fix tests by asserting actual error for context cancellation, fix parallel, and make mock more versatile
* Cleanup error handling and clarify empty metrics case
* Fix input/expected naming in otel_transform_test.go
* add comment for metric tracking
* Add a general isEmpty method
* Add clear error types
* update to latest version 1.15.0 of OTEL
* Do not pass in waitgroup and use error channel instead.
* Using SHA 7dea2225a218872e86d2f580e82c089b321617b0 to avoid build failures in otel
* Rebase onto otl exporter to downgrade metrics API to v1.15.0-rc.1
* Initialize OTELSink with sync.Map for all the instrument stores.
* Added telemetry agent to client and init sink in deps
* Fixed client
* Initalize sink in deps
* init sink in telemetry library
* Init deps before telemetry
* Use concrete telemetry.OtelSink type
* add /v1/metrics
* Avoid returning err for telemetry init
* move sink init within the IsCloudEnabled()
* Use HCPSinkOpts in deps instead
* update golden test for configuration file
* Switch to using extra sinks in the telemetry library
* keep name MetricsConfig
* fix log in verifyCCMRegistration
* Set logger in context
* pass around MetricSink in deps
* Fix imports
* Rebased onto otel sink pr
* Fix URL in test
* [HCP Observability] OTELSink (#17159)
* Client configured with TLS using HCP config and retry/throttle
* run go mod tidy
* Remove one abstraction to use the config from deps
* Address PR feedback
* Client configured with TLS using HCP config and retry/throttle
* run go mod tidy
* Create new OTELExporter which uses the MetricsClient
Add transform because the conversion is in an /internal package
* Fix lint error
* early return when there are no metrics
* Add NewOTELExporter() function
* Downgrade to metrics SDK version: v1.15.0-rc.1
* Fix imports
* fix small nits with comments and url.URL
* Fix tests by asserting actual error for context cancellation, fix parallel, and make mock more versatile
* Cleanup error handling and clarify empty metrics case
* Fix input/expected naming in otel_transform_test.go
* add comment for metric tracking
* Add a general isEmpty method
* Add clear error types
* update to latest version 1.15.0 of OTEL
* Client configured with TLS using HCP config and retry/throttle
* run go mod tidy
* Remove one abstraction to use the config from deps
* Address PR feedback
* Initialize OTELSink with sync.Map for all the instrument stores.
* Moved PeriodicReader init to NewOtelReader function. This allows us to use a ManualReader for tests.
* Switch to mutex instead of sync.Map to avoid type assertion
* Add gauge store
* Clarify comments
* return concrete sink type
* Fix lint errors
* Move gauge store to be within sink
* Use context.TODO,rebase and clenaup opts handling
* Rebase onto otl exporter to downgrade metrics API to v1.15.0-rc.1
* Fix imports
* Update to latest stable version by rebasing on cc-4933, fix import, remove mutex init, fix opts error messages and use logger from ctx
* Add lots of documentation to the OTELSink
* Fix gauge store comment and check ok
* Add select and ctx.Done() check to gauge callback
* use require.Equal for attributes
* Fixed import naming
* Remove float64 calls and add a NewGaugeStore method
* Change name Store to Set in gaugeStore, add concurrency tests in both OTELSink and gauge store
* Generate 100 gauge operations
* Seperate the labels into goroutines in sink test
* Generate kv store for the test case keys to avoid using uuid
* Added a race test with 300 samples for OTELSink
* Do not pass in waitgroup and use error channel instead.
* Using SHA 7dea2225a218872e86d2f580e82c089b321617b0 to avoid build failures in otel
* Fix nits
* pass extraSinks as function param instead
* Add default interval as package export
* remove verifyCCM func
* Add clusterID
* Fix import and add t.Parallel() for missing tests
* Kick Vercel CI
* Remove scheme from endpoint path, and fix error logging
* return metrics.MetricSink for sink method
* Update SDK
* Added telemetry agent to client and init sink in deps
* Add node_id and __replica__ default labels
* add function for default labels and set x-hcp-resource-id
* Fix labels tests
* Commit suggestion for getDefaultLabels
Co-authored-by: Joshua Timmons <joshua.timmons1@gmail.com>
* Fixed server.id, and t.Parallel()
* Make defaultLabels a method on the TelemetryConfig object
* Rename FilterList to lowercase filterList
* Cleanup filter implemetation by combining regex into a single one, and making the type lowercase
* Fix append
* use regex directly for filters
* Fix x-resource-id test to use mocked value
* Fix log.Error formats
* Forgot the len(opts.Label) optimization)
* Use cfg.NodeID instead
---------
Co-authored-by: Joshua Timmons <joshua.timmons1@gmail.com>
* remove replic tag (#17484)
* [HCP Observability] Add custom metrics for OTEL sink, improve logging, upgrade modules and cleanup metrics client (#17455)
* Add custom metrics for Exporter and transform operations
* Improve deps logging
Run go mod tidy
* Upgrade SDK and OTEL
* Remove the partial success implemetation and check for HTTP status code in metrics client
* Add x-channel
* cleanup logs in deps.go based on PR feedback
* Change to debug log and lowercase
* address test operation feedback
* use GetHumanVersion on version
* Fix error wrapping
* Fix metric names
* [HCP Observability] Turn off retries for now until dynamically configurable (#17496)
* Remove retries for now until dynamic configuration is possible
* Clarify comment
* Update changelog
* improve changelog
---------
Co-authored-by: Joshua Timmons <joshua.timmons1@gmail.com>
* Support Listener in Property Override
Add support for patching `Listener` resources via the builtin
`property-override` extension.
Refactor existing listener patch code in `BasicEnvoyExtender` to
simplify addition of resource support.
* Support ClusterLoadAssignment in Property Override
Add support for patching `ClusterLoadAssignment` resources via the
builtin `property-override` extension.
`property-override` is an extension that allows for arbitrarily
patching Envoy resources based on resource matching filters. Patch
operations resemble a subset of the JSON Patch spec with minor
differences to facilitate patching pre-defined (protobuf) schemas.
See Envoy Extension product documentation for more details.
Co-authored-by: Eric Haberkorn <eric.haberkorn@hashicorp.com>
Co-authored-by: Kyle Havlovitz <kyle@hashicorp.com>
* perf: Remove expensive reflection from raft/mesh hot path
Replaces a reflection-based copy of a struct in the mesh topology with a
deep-copy generated implementation.
This is in the hot-path of raft FSM updates, and the reflection overhead was a
substantial part of mesh registration times (~90%). This could manifest as raft
thread saturation, and resulting instability.
Co-authored-by: Joel Brandhorst <joel.brandhorst@gmail.com>
* add changelog
---------
Co-authored-by: Joel Brandhorst <joel.brandhorst@gmail.com>
Co-authored-by: John Murret <john.murret@hashicorp.com>
This will likely happen frequently with sameness groups. Relaxing this
constraint is harmless for failover because xds/endpoints exludes cross
partition and peer endpoints.
* xds generation for routes api gateway
* Update gateway.go
* move buildHttpRoute into xds package
* Update agent/consul/discoverychain/gateway.go
* remove unneeded function
* convert http route code to only run for http protocol to future proof code path
* Update agent/consul/discoverychain/gateway.go
Co-authored-by: Mike Morris <mikemorris@users.noreply.github.com>
* fix tests, clean up http check logic
* clean up todo
* Fix casing in docstring
* Fix import block, adjust docstrings
* Rename func
* Consolidate docstring onto single line
* Remove ToIngress() conversion for APIGW, which generates its own xDS now
* update name and comment
* use constant value
* use constant
* rename readyUpstreams to readyListeners to better communicate what that function is doing
---------
Co-authored-by: Mike Morris <mikemorris@users.noreply.github.com>
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* xds generation for routes api gateway
* Update gateway.go
* move buildHttpRoute into xds package
* Update agent/consul/discoverychain/gateway.go
* remove unneeded function
* convert http route code to only run for http protocol to future proof code path
* Update agent/consul/discoverychain/gateway.go
Co-authored-by: Mike Morris <mikemorris@users.noreply.github.com>
* fix tests, clean up http check logic
* clean up todo
* Fix casing in docstring
* Fix import block, adjust docstrings
* update name and comment
* use constant value
* use constant
---------
Co-authored-by: Mike Morris <mikemorris@users.noreply.github.com>
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
Fix ACL check on health endpoint
Prior to this change, the service health API would not explicitly return an
error whenever a token with invalid permissions was given, and it would instead
return empty results. With this change, a "Permission denied" error is returned
whenever data is queried. This is done to better support the agent cache, which
performs a fetch backoff sleep whenever ACL errors are encountered. Affected
endpoints are: `/v1/health/connect/` and `/v1/health/ingress/`.
* Fix namespaced peer service updates / deletes.
This change fixes a function so that namespaced services are
correctly queried when handling updates / deletes. Prior to this
change, some peered services would not correctly be un-exported.
* Add changelog.
To avoid unintended tampering with remote downstreams via service
config, refactor BasicEnvoyExtender and RuntimeConfig to disallow
typical Envoy extensions from being applied to non-local proxies.
Continue to allow this behavior for AWS Lambda and the read-only
Validate builtin extensions.
Addresses CVE-2023-2816.
* API Gateway XDS Primitives, endpoints and clusters (#17002)
* XDS primitive generation for endpoints and clusters
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* server_test
* deleted extra file
* add missing parents to test
---------
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* Routes for API Gateway (#17158)
* XDS primitive generation for endpoints and clusters
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* server_test
* deleted extra file
* add missing parents to test
* checkpoint
* delete extra file
* httproute flattening code
* linting issue
* so close on this, calling for tonight
* unit test passing
* add in header manip to virtual host
* upstream rebuild commented out
* Use consistent upstream name whether or not we're rebuilding
* Start working through route naming logic
* Fix typos in test descriptions
* Simplify route naming logic
* Simplify RebuildHTTPRouteUpstream
* Merge additional compiled discovery chains instead of overwriting
* Use correct chain for flattened route, clean up + add TODOs
* Remove empty conditional branch
* Restore previous variable declaration
Limit the scope of this PR
* Clean up, improve TODO
* add logging, clean up todos
* clean up function
---------
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* checkpoint, skeleton, tests not passing
* checkpoint
* endpoints xds cluster configuration
* resources test fix
* fix reversion in resources_test
* checkpoint
* Update agent/proxycfg/api_gateway.go
Co-authored-by: John Maguire <john.maguire@hashicorp.com>
* unit tests passing
* gofmt
* add deterministic sorting to appease the unit test gods
* remove panic
* Find ready upstream matching listener instead of first in list
* Clean up, improve TODO
* Modify getReadyUpstreams to filter upstreams by listener (#17410)
Each listener would previously have all upstreams from any route that bound to the listener. This is problematic when a route bound to one listener also binds to other listeners and so includes upstreams for multiple listeners. The list for a given listener would then wind up including upstreams for other listeners.
* clean up todos, references to api gateway in listeners_ingress
* merge in Nathan's fix
* Update agent/consul/discoverychain/gateway.go
* cleanup current todos, remove snapshot manipulation from generation code
* Update agent/structs/config_entry_gateways.go
Co-authored-by: Thomas Eckert <teckert@hashicorp.com>
* Update agent/consul/discoverychain/gateway.go
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* Update agent/consul/discoverychain/gateway.go
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* Update agent/proxycfg/snapshot.go
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* clarified header comment for FlattenHTTPRoute, changed RebuildHTTPRouteUpstream to BuildHTTPRouteUpstream
* simplify cert logic
* Delete scratch
* revert route related changes in listener PR
* Update agent/consul/discoverychain/gateway.go
* Update agent/proxycfg/snapshot.go
* clean up uneeded extra lines in endpoints
---------
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
Co-authored-by: John Maguire <john.maguire@hashicorp.com>
Co-authored-by: Thomas Eckert <teckert@hashicorp.com>
* endpoints xds cluster configuration
* clusters xds native generation
* resources test fix
* fix reversion in resources_test
* Update agent/proxycfg/api_gateway.go
Co-authored-by: John Maguire <john.maguire@hashicorp.com>
* gofmt
* Modify getReadyUpstreams to filter upstreams by listener (#17410)
Each listener would previously have all upstreams from any route that bound to the listener. This is problematic when a route bound to one listener also binds to other listeners and so includes upstreams for multiple listeners. The list for a given listener would then wind up including upstreams for other listeners.
* Update agent/proxycfg/api_gateway.go
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* Restore import blocking
* Undo removal of unrelated code
---------
Co-authored-by: John Maguire <john.maguire@hashicorp.com>
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
This change enables workflows where you are reapplying a resource that should have an owner ref to publish modifications to the resources data without performing a read to figure out the current owner resource incarnations UID.
Basically we want workflows similar to `kubectl apply` or `consul config write` to be able to work seamlessly even for owned resources.
In these cases the users intention is to have the resource owned by the “current” incarnation of the owner resource.
* endpoints xds cluster configuration
* resources test fix
* fix reversion in resources_test
* Update agent/proxycfg/api_gateway.go
Co-authored-by: John Maguire <john.maguire@hashicorp.com>
* gofmt
* Modify getReadyUpstreams to filter upstreams by listener (#17410)
Each listener would previously have all upstreams from any route that bound to the listener. This is problematic when a route bound to one listener also binds to other listeners and so includes upstreams for multiple listeners. The list for a given listener would then wind up including upstreams for other listeners.
* Update agent/proxycfg/api_gateway.go
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* Restore import blocking
* Skip to next route if route has no upstreams
* cleanup
* change set from bool to empty struct
---------
Co-authored-by: John Maguire <john.maguire@hashicorp.com>
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
Semir Patel