31 Commits (32d1eae28bfd0a5e72e02e4f6a4c040154dcc31d)

Author	SHA1	Message	Date
Paul Banks	3e3f0e1f31	HTTP agent registration allows proxy to be defined.	7 years ago
Paul Banks	e6071051cf	Added connect proxy config and local agent state setup on boot.	7 years ago
Preetha Appan	d721da7b67	Also make snapshot interval configurable	7 years ago
Preetha Appan	66f31cd25a	Make raft snapshot commit threshold configurable	7 years ago
Pierre Souchay	a680c8e91b	Clearer documentation and comments for enabling Prometheus support	7 years ago
Pierre Souchay	93a01b0949	Now use prometheus_retention_time > 0 to enable prometheus support	7 years ago
Pierre Souchay	fd98fb1449	Added support exposing metrics in Prometheus format	7 years ago
Preetha	a67d27c756	Adds discovery_max_stale (#4004) ... Adds a new option to allow service discovery endpoints to return stale results if configured at the agent level.	7 years ago
Josh Soref	94835a2715	Spelling (#3958) ... * spelling: another * spelling: autopilot * spelling: beginning * spelling: circonus * spelling: default * spelling: definition * spelling: distance * spelling: encountered * spelling: enterprise * spelling: expands * spelling: exits * spelling: formatting * spelling: health * spelling: hierarchy * spelling: imposed * spelling: independence * spelling: inspect * spelling: last * spelling: latest * spelling: client * spelling: message * spelling: minimum * spelling: notify * spelling: nonexistent * spelling: operator * spelling: payload * spelling: preceded * spelling: prepared * spelling: programmatically * spelling: required * spelling: reconcile * spelling: responses * spelling: request * spelling: response * spelling: results * spelling: retrieve * spelling: service * spelling: significantly * spelling: specifies * spelling: supported * spelling: synchronization * spelling: synchronous * spelling: themselves * spelling: unexpected * spelling: validations * spelling: value	7 years ago
Devin Canterberry	c901307a47	🔒 Update supported TLS cipher suites ... The list of cipher suites included in this commit are consistent with the values and precedence in the [Golang TLS documentation](https://golang.org/src/crypto/tls/cipher_suites.go). > **Note:** Cipher suites with RC4 are still included within the list > of accepted values for compatibility, but **these cipher suites are > not safe to use** and should be deprecated with warnings and > subsequently removed. Support for RC4 ciphers has already been > removed or disabled by default in many prominent browsers and tools, > including Golang. > > **References:** > > * [RC4 on Wikipedia](https://en.wikipedia.org/wiki/RC4) > * [Mozilla Security Blog](https://blog.mozilla.org/security/2015/09/11/deprecating-the-rc4-cipher/)	7 years ago
Pierre Souchay	0b7f620dc6	Allow to control the number of A/AAAA Record returned by DNS ... This allows to have randomized resource records (i.e. each answer contains only one IP, but the IP changes every request) for A, AAAA records. It will fix https://github.com/hashicorp/consul/issues/3355 and https://github.com/hashicorp/consul/issues/3937 See https://github.com/hashicorp/consul/issues/3937#issuecomment-370610509 for details. It basically add a new option called `a_record_limit` and will not return more than a_record_limit when performing A, AAAA or ANY DNS requests. The existing `udp_answer_limit` option is still working but should be considered as deprecated since it works only with DNS clients not supporting EDNS.	7 years ago
James Phillips	93f68555d0	Adds enable_agent_tls_for_checks configuration option which allows (#3661) ... HTTP health checks for services requiring 2-way TLS to be checked using the agent's credentials.	7 years ago
Frank Schroeder	21a7d399bd	config: address review comments	7 years ago
Frank Schroeder	cf0a571a76	config: document remaining config options	7 years ago
Frank Schroeder	149ab13a13	config: document more config options	7 years ago
Frank Schroeder	a8f709a875	config: document more config options	7 years ago
Frank Schroeder	6c64cf9b5d	config: document more acl options	7 years ago
Frank Schroeder	ffb0f6ec8b	config: document config options	7 years ago
Frank Schroeder	70270d6d98	config: document acl options	7 years ago
Frank Schroeder	7f214b1e1c	config: document autopilot options	7 years ago
Frank Schroeder	cfc891fc25	config: document dns options	7 years ago
Frank Schroeder	d27617c60b	config: document http options	7 years ago
Frank Schroeder	625713dd72	config: document telemetry options	7 years ago
Frank Schröder	94f58199b1	agent: add option to discard health output (#3562) ... * agent: add option to discard health output In high volatile environments consul will have checks with "noisy" output which changes every time even though the status does not change. Since the output is stored in the raft log every health check update unblocks a blocking call on health checks since the raft index has changed even though the status of the health checks may not have changed at all. By discarding the output of the health checks the users can choose a different tradeoff. Less visibility on why a check failed in exchange for a reduced change rate on the raft log. * agent: discard output also when adding a check * agent: add test for discard check output * agent: update docs * go vet * Adds discard_check_output to reloadable config table. * Updates the change log.	7 years ago
James Phillips	bb12368eac	Makes RPC handling more robust when rolling servers. (#3561) ... * Adds client-side retry for no leader errors. This paves over the case where the client was connected to the leader when it loses leadership. * Adds a configurable server RPC drain time and a fail-fast path for RPCs. When a server leaves it gets removed from the Raft configuration, so it will never know who the new leader server ends up being. Without this we'd be doomed to wait out the RPC hold timeout and then fail. This makes things fail a little quicker while a sever is draining, and since we added a client retry AND since the server doing this has already shut down and left the Serf LAN, clients should retry against some other server. * Makes the RPC hold timeout configurable. * Reorders struct members. * Sets the RPC hold timeout default for test servers. * Bumps the leave drain time up to 5 seconds. * Robustifies retries with a simpler client-side RPC hold. * Reverts untended delete.	7 years ago
Kyle Havlovitz	c728564994	Update metric names and add a legacy config flag	7 years ago
Preetha Appan	51a04ec87d	Introduces new 'list' permission that applies to KV store recursive reads, and enforced only when opted in.	7 years ago
James Phillips	98850322c0	Adds a comment about Datacenter and NodeName being stable interfaces ... in the runtime config strucutre.	7 years ago
Frank Schröder	21118cafeb	Recursive sanitize (#3505) ... * vendor: add github.com/sergi/go-diff/diffmatchpatch for diff'ing test output * config: refactor Sanitize to recursively clean runtime config and format complex fields * Removes an extra int cast. * Adds a top-level check test case for sanitization.	7 years ago
Frank Schröder	e84c2b2edd	Metrics service prefix (#3498) ... * metrics: replace statsite_prefix with service_prefix The metrics prefix isn't statsite specific and is in fact used for all metrics providers. Since we are deprecating fields anyway we should fix this one as well. Fixes #3293 * Updates docs and sorts telemetry section. * Renames to "metrics_prefix" to disambiguate with Consul services. * Updates the change log.	7 years ago
Frank Schröder	12216583a1	New config parser, HCL support, multiple bind addrs (#3480) ... * new config parser for agent This patch implements a new config parser for the consul agent which makes the following changes to the previous implementation: * add HCL support * all configuration fragments in tests and for default config are expressed as HCL fragments * HCL fragments can be provided on the command line so that they can eventually replace the command line flags. * HCL/JSON fragments are parsed into a temporary Config structure which can be merged using reflection (all values are pointers). The existing merge logic of overwrite for values and append for slices has been preserved. * A single builder process generates a typed runtime configuration for the agent. The new implementation is more strict and fails in the builder process if no valid runtime configuration can be generated. Therefore, additional validations in other parts of the code should be removed. The builder also pre-computes all required network addresses so that no address/port magic should be required where the configuration is used and should therefore be removed. * Upgrade github.com/hashicorp/hcl to support int64 * improve error messages * fix directory permission test * Fix rtt test * Fix ForceLeave test * Skip performance test for now until we know what to do * Update github.com/hashicorp/memberlist to update log prefix * Make memberlist use the default logger * improve config error handling * do not fail on non-existing data-dir * experiment with non-uniform timeouts to get a handle on stalled leader elections * Run tests for packages separately to eliminate the spurious port conflicts * refactor private address detection and unify approach for ipv4 and ipv6. Fixes #2825 * do not allow unix sockets for DNS * improve bind and advertise addr error handling * go through builder using test coverage * minimal update to the docs * more coverage tests fixed * more tests * fix makefile * cleanup * fix port conflicts with external port server 'porter' * stop test server on error * do not run api test that change global ENV concurrently with the other tests * Run remaining api tests concurrently * no need for retry with the port number service * monkey patch race condition in go-sockaddr until we understand why that fails * monkey patch hcl decoder race condidtion until we understand why that fails * monkey patch spurious errors in strings.EqualFold from here * add test for hcl decoder race condition. Run with go test -parallel 128 * Increase timeout again * cleanup * don't log port allocations by default * use base command arg parsing to format help output properly * handle -dc deprecation case in Build * switch autopilot.max_trailing_logs to int * remove duplicate test case * remove unused methods * remove comments about flag/config value inconsistencies * switch got and want around since the error message was misleading. * Removes a stray debug log. * Removes a stray newline in imports. * Fixes TestACL_Version8. * Runs go fmt. * Adds a default case for unknown address types. * Reoders and reformats some imports. * Adds some comments and fixes typos. * Reorders imports. * add unix socket support for dns later * drop all deprecated flags and arguments * fix wrong field name * remove stray node-id file * drop unnecessary patch section in test * drop duplicate test * add test for LeaveOnTerm and SkipLeaveOnInt in client mode * drop "bla" and add clarifying comment for the test * split up tests to support enterprise/non-enterprise tests * drop raft multiplier and derive values during build phase * sanitize runtime config reflectively and add test * detect invalid config fields * fix tests with invalid config fields * use different values for wan sanitiziation test * drop recursor in favor of recursors * allow dns_config.udp_answer_limit to be zero * make sure tests run on machines with multiple ips * Fix failing tests in a few more places by providing a bind address in the test * Gets rid of skipped TestAgent_CheckPerformanceSettings and adds case for builder. * Add porter to server_test.go to make tests there less flaky * go fmt	7 years ago