* Create ConsulNodeList component
* Implement ConsulNodeList and the new Search/Sort to Node List page
* Minor styling fix to align the first icons in composite row
* Fix-up and add tests for the redesigned Node List page
* Add Leader to composite row for Node List page
* Add test for node leader
* Upgrade consul-api-dobule to version 3.1.3
* Create ConsulInstaceChecks component with test
* Redesign: Service Instaces tab in for a Node
* Update Node tests to work with the ConsulServiceInstancesList
* Style fix to the copy button in the composite-row details
* Delete helper and move logic to ConsulInstanceChecks component
* Delete unused component consul-node-service-list
* ui: Combine all "see/don't see" steps into one step
* Fix up broken tests
* Add some test meta data/titles
* Test out proxies in the service listing
* Remove comments
* ui: Add tab navigation to the browser history/URLs
This commit changes all our tabbed UI interfaces in the catalog to use
actual URL changes rather than only updating the content in the page
using CSS.
Originally we had decided not to add tab clicks into the browser
history for a variety of reasons. As the UI has progressed these tabs
are a fairly common pattern we are using and as the UI grows and
stabilizes around certain UX patterns we've decided to make these tabs
'URL changing'.
Pros:
- Deeplinking
- Potentially smaller Route files with a more concentrated scope of the
contents of a tab rather than the entire page.
- Tab clicks now go into your history meaning backwards and forwards
buttons take you through the tabs not just the pages.
- The majority of our partials are now fully fledged templates (Octane
🎉)
Cons:
- Tab clicks now go into your history meaning backwards and forwards
buttons take you through the tabs not just the pages. (Could be good and
bad from a UX perspective)
- Many more Route and Controller files (yet as mentioned above each of these
have a more reduced scope)
- Moving around the contents of these tabs, or changing the visual names
of them means updates to the URL structure, which then should
potentially entail redirects, therefore what things that seem like
straightforwards design reorganizations are now a little more impactful.
It was getting to the point that the Pros outweight the Cons
Apart from moving some files around we made a few more tiny tweaks to
get this all working:
- Our freetext-filter component now performs the initial search rather
than this happening in the Controller (remove of the search method in
the Controllers and the new didInsertElement hook in the component)
- All of the <TabNav>'s were changed to use its alternative href
approach.
- <TabPanel>s usage was mostly removed. This is th thing I dislike the
most. I think this needs removing, but I'd also like to remove the HTML
it creates. You'll see that every new page is wrappe din the HTML for
the old <TabPanel>, this is to continue to use the same HTML structure
and id's as before to avoid making further changes to any CSS that might
use this and being able to target things during testing. We could have
also removed these here, but it would have meant a much larger changeset
and can just as easily be done at a later date.
- We made a new `tabgroup` page-object component, which is almost
identical to the previous `radiogroup` one and injected that instead
where needed during testing.
* Make sure we pick up indexed routes when nspaces are enabled
* Move session invalidation to the child (session) route
* Revert back to not using didInsertElement for updating the searching
This adds a way for the searchable to remember the last search result
instead, which changes less and stick to the previous method of
searching.
* Update search field placeholder to display `Search`
* Add an acceptance test to search node listings with node name and IP Address
* Update and add unit tests for filter/search node listing with IP Address
* ui: Acceptance test improvements to prepare for more NS tests
* ui: Namespace acceptance testing (#7005)
* Update api-double and consul-api-double for http.body
* Adds places where we missed passing the nspace through
* Hardcode nspace CRUD to use the default nspace for policies and roles
* Alter test helpers to allow us to control nspaces from the outside
* Amends to allow tests to account for namespace, move ns from queryParam
1. We decided to move how we pass the namespace value through to the
backend when performing write actions (create, update). Previoulsy we
were using the queryParam although using the post body is the preferred
method to send the Namespace details through to the backend.
2. Other various amends to take into account testing across multiple
namespaced scenarios
* Enable nspace testing by default
* Remove last few occurances of old style http assertions
We had informally 'deprecated' our old style of http assertions that
relied on the order of http calls (even though that order was not
important for the assertion). Following on from our namespace work we
removed the majority of the old occrances of these old style assertions.
This commit removes the remaining few, and also then cleans up the
assertions/http.js file to only include the ones we are using.
This reduces our available step count further and prevents any confusion
over the usage of the old types and the new types.
* ui: Namespace CRUD acceptance tests (#7016)
* Upgrade consul-api-double
* Add all the things required for testing:
1. edit and index page objects
2. enable CONSUL_NSPACE_COUNT cookie setting
3. enable mutating HTTP response bodies based on URL
* Add acceptance test for nspace edit/delete/list and searching
Adds namespace support to the UI:
1. Namespace CRUD/management
2. Show Namespace in relevant areas (intentions, upstreams)
3. Main navigation bar improvements
4. Logic/integration to interact with a new `internal/acl/authorize` endpoint
- yarn upgrade consul-api-double which includes `status/leader`
- add all the ember-data things required to call a new endpoint
- Pass the new leader variable through to the template
- use the new leader variable in the template to set a leader
- add acceptance testing to verify leaders are highlighted
- Change testing navigation/api requests to status/leader (on the node listing page, status/leader is now the last get request to
be called).
- Template whitespace commit (less indenting)
- adds a test to to assert no errors happen with an unelected leader
-Enable blocking queries by default
-Change assertion to check for the last PUT request, not just any request for session destruction from a node page.
Since we've now turned on blocking queries by default this means that a
second GET request is made after the PUT request that we are asserting
for but before the assertion itself, this meant the assertion failed. We
double checked this by turning off blocking queries for this test using
```
And settings from yaml
---
consul:client:
blocking: 0
---
```
which made the test pass again.
As moving forwards blocking queries will be on by default, we didn't
want to disable blocking queries for this test, so we now assert the
last PUT request specifically. This means we continue to assert that the
session has been destroyed but means we don't get into problems of
ordering of requests here
Previously the tomography wasn't using ember `get` so proxy updates
(specifically here whilst receiving a blocking update) wasn't working.
This adds `get` here until we update to newer `get`less ember and also
refactors slightly removing `n` and using `distance.length` instead
Skipped tests are adding here to nag us to come back here at some point.
This commit includes several pieces of functionality to enable services
to be removed and the page to present information that this has happened
but also keep the deleted information on the page. Along with the more
usual blocking query based listing.
To enable this:
1. Implements `meta` on the model (only available on collections in
ember)
2. Adds new `catchable` ComputedProperty alongside a `listen` helper for
working with specific errors that can be thrown from EventSources in an
ember-like way. Briefly, normal computed properties update when a
property changes, EventSources can additionally throw errors so we can
catch them and show different visuals based on that.
Also:
Add support for blocking queries on the service instance detail page
1. Previous we could return undefined when a service instance has no
proxy, but this means we have nothing to attach `meta` to. We've changed
this to return an almost empty object, so with only a meta property.
At first glance there doesn't seem to be any way to provide a proxy
object to templates and be able to detect whether it is actually null
or not so we instead change some conditional logic in the templates to
detect the property we are using to generate the anchor.
2. Made a `pauseUntil` test helper function for steps where we wait for
things. This helps for DRYness but also means if we can move away from
setInterval to something else later, we can do it in one place
3. Whilst running into point 1 here, we managed to make the blocking
queries eternally loop. Whilst this is due to an error in the code and
shouldn't ever happen whilst in actual use, we've added an extra check
so that we only recur/loop the blocking query if the previous response has a
`meta.cursor`
Adds support for blocking queries on the node detail page (#5489)
1. Moves data re-shaping for the templates variables into a repository
so they are easily covered by blocking queries (into coordinatesRepo)
2. The node API returns a 404 as signal for deregistration, we also
close the sessions and coordinates blocking queries when this happens
1. Addition of external source icons for services marked as such.
2. New %with-tooltip css component (wip)
3. New 'no healthcheck' icon as external sources might not have
healthchecks, also minus icon on node cards in the service detail view
4. If a service doesn't have healthchecks, we use the [Services] tabs as the
default instead of the [Health Checks] tab in the Service detail page.
5. `css-var` helper. The idea here is that it will eventually be
replaced with pure css custom properties instead of having to use JS. It
would be nice to be able to build the css variables into the JS at build
time (you'd probably still want to specify in config which variables you
wanted available in JS), but that's possible future work.
Lastly there is probably a tiny bit more testing edits here than usual,
I noticed that there was an area where the dynamic mocking wasn't
happening, it was just using the mocks from consul-api-double, the mocks
I was 'dynamically' setting happened to be the same as the ones in
consul-api-double. I've fixed this here also but it wasn't effecting
anything until actually made certain values dynamic.
* Move notification texts to a slightly different layer (#4572)
* Further Simplify/refactor the actions/notification layer (#4573)
1. Move the 'with-feedback' actions to a 'with-blocking-action' mixin
which better describes what it does
2. Additional set of unit tests almost over the entire layer to prove
things work/add confidence for further changes
The multiple 'with-action' mixins used for every 'index/edit' combo are
now reduced down to only contain the functionality related to their
specific routes, i.e. where to redirect.
The actual functionality to block and carry out the action and then
notify are 'almost' split out so that their respective classes/objects do
one thing and one thing 'well'.
Mixins are chosen for the moment as the decoration approach used by
mixins feels better than multiple levels of inheritence, but I would
like to take this fuether in the future to a 'compositional' based
approach.
There is still possible further work to be done here, but I'm a lot
happier now this is reduced down into separate parts.
John Cowen