67 Commits (2e4cb6f77d2be36b02e9be0b289b24e5b0afb794)

Author	SHA1	Message	Date
Chris S. Kim	fcdd031911	Revert getPathSuffixUnescaped (#13256)	3 years ago
Mathew Estafanous	474385d153	Unify various status errors into one HTTP error type. (#12594) ... Replaces specific error types for HTTP Status codes with a generic HTTPError type. Co-authored-by: Chris S. Kim <ckim@hashicorp.com>	3 years ago
Daniel Nephin	3f590bb8a1	testing: fix test failures caused by new log level ... These two tests require debug logging enabled, because they look for log lines. Also switched to testify assertions because the previous errors were not clear.	3 years ago
R.B. Boyer	b60d89e7ef	bulk rewrite using this script ... set -euo pipefail unset CDPATH cd "$(dirname "$0")" for f in $(git grep '\brequire := require\.New(' | cut -d':' -f1 | sort -u); do echo "=== require: $f ===" sed -i '/require := require.New(t)/d' $f # require.XXX(blah) but not require.XXX(tblah) or require.XXX(rblah) sed -i 's/\brequire\.\([a-zA-Z0-9_]*\)(\([^tr]\)/require.\1(t,\2/g' $f # require.XXX(tblah) but not require.XXX(t, blah) sed -i 's/\brequire\.\([a-zA-Z0-9_]*\)(\(t[^,]\)/require.\1(t,\2/g' $f # require.XXX(rblah) but not require.XXX(r, blah) sed -i 's/\brequire\.\([a-zA-Z0-9_]*\)(\(r[^,]\)/require.\1(t,\2/g' $f gofmt -s -w $f done for f in $(git grep '\bassert := assert\.New(' | cut -d':' -f1 | sort -u); do echo "=== assert: $f ===" sed -i '/assert := assert.New(t)/d' $f # assert.XXX(blah) but not assert.XXX(tblah) or assert.XXX(rblah) sed -i 's/\bassert\.\([a-zA-Z0-9_]*\)(\([^tr]\)/assert.\1(t,\2/g' $f # assert.XXX(tblah) but not assert.XXX(t, blah) sed -i 's/\bassert\.\([a-zA-Z0-9_]*\)(\(t[^,]\)/assert.\1(t,\2/g' $f # assert.XXX(rblah) but not assert.XXX(r, blah) sed -i 's/\bassert\.\([a-zA-Z0-9_]*\)(\(r[^,]\)/assert.\1(t,\2/g' $f gofmt -s -w $f done	3 years ago
littlestar642	634c72d22f	add path escape and unescape to path params	3 years ago
Dan Upton	205ce9a69d	Remove references to "master" ACL tokens in tests (#11751)	3 years ago
Dan Upton	1e47e3c82b	Groundwork for exposing when queries are filtered by ACLs (#11569)	3 years ago
Daniel Nephin	970f5d78ec	agent: fix two data race in agent tests ... The LogOutput io.Writer used by TestAgent must allow concurrent reads and writes, and a bytes.Buffer does not allow this. The bytes.Buffer must be wrapped with a lock to make this safe.	3 years ago
Daniel Nephin	b9e60c0775	testing: skip slow tests with -short ... Add a skip condition to all tests slower than 100ms. This change was made using `gotestsum tool slowest` with data from the last 3 CI runs of master. See https://github.com/gotestyourself/gotestsum#finding-and-skipping-slow-tests With this change: ``` $ time go test -count=1 -short ./agent ok github.com/hashicorp/consul/agent 0.743s real 0m4.791s $ time go test -count=1 -short ./agent/consul ok github.com/hashicorp/consul/agent/consul 4.229s real 0m8.769s ```	4 years ago
R.B. Boyer	61eac21f1a	agent: return the default ACL policy to callers as a header (#9101) ... Header is: X-Consul-Default-ACL-Policy=<allow|deny> This is of particular utility when fetching matching intentions, as the fallthrough for a request that doesn't match any intentions is to enforce using the default acl policy.	4 years ago
Paul Banks	e4db845246	Refactor uiserver to separate package, cleaner Reloading	4 years ago
Paul Banks	54a33efa4b	Fix JSON encoding of metrics options which broke the index but didn't break tests. ... Also add tests that do catch that error.	4 years ago
Daniel Nephin	282fbdfa75	api: rename HTTPServer to HTTPHandlers ... Resolves a TODO about naming. This type is a set of handlers for an http.Server, it is not itself a Server. It provides http.Handler functions.	4 years ago
Daniel Nephin	0bb9c318b7	http: fix tests incorrectly using HTTPAddr to get the address of the ... https server. In #8234 I changed a few tests to use TestAgent.HTTPAddr() to find the addr used in the test. Due to the way HTTPAddr() was implemented these tests were passing, but I think the pass was incidental. HTTPAddr() was not matching any servers, and was instead returning the last server, which happened to be the one these tests wanted. This commit fixes the implementation of HTTPAddr to panic if no match was found. The tests which require an HTTPS server are changed to use a new firstAddr() to look up the correct address.	4 years ago
Daniel Nephin	6ca45e1a61	agent: add apiServers type for managing HTTP servers ... Remove Server field from HTTPServer. The field is no longer used.	4 years ago
Daniel Nephin	51b08c645b	Merge pull request #8514 from hashicorp/dnephin/testing-improvements-1 ... testing: small improvements to TestSessionCreate and testutil.retry	4 years ago
Daniel Nephin	d68edcecf4	testing: Remove all the defer os.Removeall ... Now that testutil uses t.Cleanup to remove the directory the caller no longer has to manage the removal	4 years ago
Daniel Nephin	a4b201af36	testing: Improve session_endpoint_test ... While working on another change I caused a bunch of these tests to fail. Unfortunately the failure messages were not super helpful at first. One problem was that the request and response were created outside of the retry. This meant that when the second attempt happened, the request body was empty (because the buffer had been consumed), and so the request was not actually being retried. This was fixed by moving more of the request creation into the retry block. Another problem was that these functions can return errors in two ways, and are not consistent about which way they use. Some errors are returned to the response writer, but the tests were not checking those errors, which was causing a panic later on. This was fixed by adding a check for the response code. Also adds some missing t.Helper(), and has assertIndex use checkIndex so that it is clear these are the same implementation.	4 years ago
Daniel Nephin	df4088291c	agent/http: Update TestSetupHTTPServer_HTTP2 ... To remove the need to store the http.Server. This will allow us to remove the http.Server field from the HTTPServer struct.	4 years ago
Daniel Nephin	a5e45defb1	agent/http: un-embed the HTTPServer ... The embedded HTTPServer struct is not used by the large HTTPServer struct. It is used by tests and the agent. This change is a small first step in the process of removing that field. The eventual goal is to reduce the scope of HTTPServer making it easier to test, and split into separate packages.	4 years ago
Matt Keeler	3dbbd2d37d	Implement Client Agent Auto Config ... There are a couple of things in here. First, just like auto encrypt, any Cluster.AutoConfig RPC will implicitly use the less secure RPC mechanism. This drastically modifies how the Consul Agent starts up and moves most of the responsibilities (other than signal handling) from the cli command and into the Agent.	5 years ago
Hans Hasselberg	c7e6c9ebec	http: use default minsize for gzip handler. (#7354) ... Fixes #6306	5 years ago
R.B. Boyer	ffb9c7d6f7	acl: remove the deprecated `acl_enforce_version_8` option (#7991) ... Fixes #7292	5 years ago
Daniel Nephin	c662f0f0de	Fix a number of problems found by staticcheck ... Some of these problems are minor (unused vars), but others are real bugs (ignored errors). Co-authored-by: Matt Keeler <mkeeler@users.noreply.github.com>	5 years ago
Daniel Nephin	600645b5f9	Add unconvert linter ... To find unnecessary type convertions	5 years ago
Daniel Nephin	e759daafdd	Rename NewTestAgentWithFields to StartTestAgent ... This function now only starts the agent. Using: git grep -l 'StartTestAgent(t, true,' | \ xargs sed -i -e 's/StartTestAgent(t, true,/StartTestAgent(t,/g'	5 years ago
Daniel Nephin	475659a132	Remove name from NewTestAgent ... Using: git grep -l 'NewTestAgent(t, t.Name(),' | \ xargs sed -i -e 's/NewTestAgent(t, t.Name(),/NewTestAgent(t,/g'	5 years ago
John Cowen	e83fb1882c	Adds http_config.response_headers to the UI headers plus tests (#7369)	5 years ago
Hans Hasselberg	5531678e9e	Security fixes (#7182) ... * Mitigate HTTP/RPC Services Allow Unbounded Resource Usage Fixes #7159. Co-authored-by: Matt Keeler <mkeeler@users.noreply.github.com> Co-authored-by: Paul Banks <banks@banksco.de>	5 years ago
Chris Piraino	401221de58	Allow users to configure either unstructured or JSON logging (#7130) ... * hclog Allow users to choose between unstructured and JSON logging	5 years ago
Hans Hasselberg	f457cfa965	tests: increase TLSHandshakeTimeout to help slow tests (#6864) ... Fixes https://github.com/hashicorp/consul/issues/6858.	5 years ago
R.B. Boyer	f9496dc627	sdk: add freelist tracking and ephemeral port range skipping to freeport ... This should cut down on test flakiness. Problems handled: - If you had enough parallel test cases running, the former circular approach to handling the port block could hand out the same port to multiple cases before they each had a chance to bind them, leading to one of the two tests to fail. - The freeport library would allocate out of the ephemeral port range. This has been corrected for Linux (which should cover CI). - The library now waits until a formerly-in-use port is verified to be free before putting it back into circulation.	5 years ago
Sarah Adams	001137e5e5	test: ensure all TestAgent constructions use a constructor (#6443) ... ensure all TestAgent constructions use a constructor to get start retries + test logs going to the right place Fixes #6435	5 years ago
Sarah Adams	4ed5515fca	refactor & add better retry logic to NewTestAgent (#6363) ... Fixes #6361	5 years ago
R.B. Boyer	3be88df207	test: explicitly run the pprof tests for 1s instead of the 30s default (#6421)	5 years ago
Mike Morris	65be58703c	connect: remove managed proxies (#6220) ... * connect: remove managed proxies implementation and all supporting config options and structs * connect: remove deprecated ProxyDestination * command: remove CONNECT_PROXY_TOKEN env var * agent: remove entire proxyprocess proxy manager * test: remove all managed proxy tests * test: remove irrelevant managed proxy note from TestService_ServerTLSConfig * test: update ContentHash to reflect managed proxy removal * test: remove deprecated ProxyDestination test * telemetry: remove managed proxy note * http: remove /v1/agent/connect/proxy endpoint * ci: remove deprecated test exclusion * website: update managed proxies deprecation page to note removal * website: remove managed proxy configuration API docs * website: remove managed proxy note from built-in proxy config * website: add note on removing proxy subdirectory of data_dir	5 years ago
Jeff Mitchell	4243c3ae42	Move internal/ to sdk/ (#5568) ... * Move internal/ to sdk/ * Add a readme to the SDK folder	6 years ago
Jeff Mitchell	47c390025b	Convert to Go Modules (#5517) ... * First conversion * Use serf 0.8.2 tag and associated updated deps * * Move freeport and testutil into internal/ * Make internal/ its own module * Update imports * Add replace statements so API and normal Consul code are self-referencing for ease of development * Adapt to newer goe/values * Bump to new cleanhttp * Fix ban nonprintable chars test * Update lock bad args test The error message when the duration cannot be parsed changed in Go 1.12 (ae0c435877d3aacb9af5e706c40f9dddde5d3e67). This updates that test. * Update another test as well * Bump travis * Bump circleci * Bump go-discover and godo to get rid of launchpad dep * Bump dockerfile go version * fix tar command * Bump go-cleanhttp	6 years ago
Matt Keeler	118adbb123	ACL Token Persistence and Reloading (#5328) ... This PR adds two features which will be useful for operators when ACLs are in use. 1. Tokens set in configuration files are now reloadable. 2. If `acl.enable_token_persistence` is set to `true` in the configuration, tokens set via the `v1/agent/token` endpoint are now persisted to disk and loaded when the agent starts (or during configuration reload) Note that token persistence is opt-in so our users who do not want tokens on the local disk will see no change. Some other secondary changes: * Refactored a bunch of places where the replication token is retrieved from the token store. This token isn't just for replicating ACLs and now it is named accordingly. * Allowed better paths in the `v1/agent/token/` API. Instead of paths like: `v1/agent/token/acl_replication_token` the path can now be just `v1/agent/token/replication`. The old paths remain to be valid. * Added a couple new API functions to set tokens via the new paths. Deprecated the old ones and pointed to the new names. The names are also generally better and don't imply that what you are setting is for ACLs but rather are setting ACL tokens. There is a minor semantic difference there especially for the replication token as again, its no longer used only for ACL token/policy replication. The new functions will detect 404s and fallback to using the older token paths when talking to pre-1.4.3 agents. * Docs updated to reflect the API additions and to show using the new endpoints. * Updated the ACL CLI set-agent-tokens command to use the non-deprecated APIs.	6 years ago
Matt Keeler	766d771017	Pass a testing.T into NewTestAgent and TestAgent.Start (#5342) ... This way we can avoid unnecessary panics which cause other tests not to run. This doesn't remove all the possibilities for panics causing other tests not to run, it just fixes the TestAgent	6 years ago
Aestek	c043de5381	[Security] Allow blocking Write endpoints on Agent using Network Addresses (#4719) ... * Add -write-allowed-nets option * Add documentation for the new write_allowed_nets option	6 years ago
Jack Pearkes	8c684db488	New command: consul debug (#4754) ... * agent/debug: add package for debugging, host info * api: add v1/agent/host endpoint * agent: add v1/agent/host endpoint * command/debug: implementation of static capture * command/debug: tests and only configured targets * agent/debug: add basic test for host metrics * command/debug: add methods for dynamic data capture * api: add debug/pprof endpoints * command/debug: add pprof * command/debug: timing, wg, logs to disk * vendor: add gopsutil/disk * command/debug: add a usage section * website: add docs for consul debug * agent/host: require operator:read * api/host: improve docs and no retry timing * command/debug: fail on extra arguments * command/debug: fixup file permissions to 0644 * command/debug: remove server flags * command/debug: improve clarity of usage section * api/debug: add Trace for profiling, fix profile * command/debug: capture profile and trace at the same time * command/debug: add index document * command/debug: use "clusters" in place of members * command/debug: remove address in output * command/debug: improve comment on metrics sleep * command/debug: clarify usage * agent: always register pprof handlers and protect This will allow us to avoid a restart of a target agent for profiling by always registering the pprof handlers. Given this is a potentially sensitive path, it is protected with an operator:read ACL and enable debug being set to true on the target agent. enable_debug still requires a restart. If ACLs are disabled, enable_debug is sufficient. * command/debug: use trace.out instead of .prof More in line with golang docs. * agent: fix comment wording * agent: wrap table driven tests in t.run()	6 years ago
Paul Banks	88388d760d	Support Agent Caching for Service Discovery Results (#4541) ... * Add cache types for catalog/services and health/services and basic test that caching works * Support non-blocking cache types with Cache-Control semantics. * Update API docs to include caching info for every endpoint. * Comment updates per PR feedback. * Add note on caching to the 10,000 foot view on the architecture page to make the new data path more clear. * Document prepared query staleness quirk and force all background requests to AllowStale so we can spread service discovery load across servers.	6 years ago
Miroslav Bagljas	3c23979afd	Fixes #4483: Add support for Authorization: Bearer token Header (#4502) ... Added Authorization Bearer token support as per RFC6750 * appended Authorization header token parsing after X-Consul-Token * added test cases * updated website documentation to mention Authorization header * improve tests, improve Bearer parsing	6 years ago
Matt Keeler	870a6ad6a8	Handle resolving proxy tokens when parsing HTTP requests (#4453) ... Fixes: #4441 This fixes the issue with Connect Managed Proxies + ACLs being broken. The underlying problem was that the token parsed for most http endpoints was sent untouched to the servers via the RPC request. These changes make it so that at the HTTP endpoint when parsing the token we additionally attempt to convert potential proxy tokens into regular tokens before sending to the RPC endpoint. Proxy tokens are only valid on the agent with the managed proxy so the resolution has to happen before it gets forwarded anywhere.	6 years ago
Paul Banks	8dd50d5b2d	Add config option to disable HTTP printable char path check (#4442)	6 years ago
Paul Banks	d5e934f9ff	Ooops that was meant to be to a branch no master... EMORECOFFEE ... Revert "Add config option to disable HTTP printable char path check" This reverts commit eebe45a47b.	6 years ago
Paul Banks	eebe45a47b	Add config option to disable HTTP printable char path check	6 years ago
Preetha	a67d27c756	Adds discovery_max_stale (#4004) ... Adds a new option to allow service discovery endpoints to return stale results if configured at the agent level.	7 years ago
Edd Steel	f770f360e9	Test every endpoint for OPTIONS/MethodNotFound	7 years ago