32 Commits (262897469260cc6319ea9369518e20ac2fed3178)

Author	SHA1	Message	Date
Freddy	078c40425f	Rename "cluster" config entry to "mesh" (#10127) ... This config entry is being renamed primarily because in k8s the name cluster could be confusing given that the config entry applies across federated datacenters. Additionally, this config entry will only apply to Consul as a service mesh, so the more generic "cluster" name is not needed.	4 years ago
freddygv	7bd51ff536	Replace TransparentProxy bool with ProxyMode ... This PR replaces the original boolean used to configure transparent proxy mode. It was replaced with a string mode that can be set to: - "": Empty string is the default for when the setting should be defaulted from other configuration like config entries. - "direct": Direct mode is how applications originally opted into the mesh. Proxy listeners need to be dialed directly. - "transparent": Transparent mode enables configuring Envoy as a transparent proxy. Traffic must be captured and redirected to the inbound and outbound listeners. This PR also adds a struct for transparent proxy specific configuration. Initially this is not stored as a pointer. Will revisit that decision before GA.	4 years ago
R.B. Boyer	499fee73b3	connect: add toggle to globally disable wildcard outbound network access when transparent proxy is enabled (#9973) ... This adds a new config entry kind "cluster" with a single special name "cluster" where this can be controlled.	4 years ago
freddygv	a54d6a9010	Update proxycfg for transparent proxy	4 years ago
R.B. Boyer	43193a35c6	xds: prevent LDS flaps in mesh gateways due to unstable datacenter lists (#9651) ... Also fix a similar issue in Terminating Gateways that was masked by an overzealous test.	4 years ago
R.B. Boyer	74d5df7c7a	xds: use envoy's rbac filter to handle intentions entirely within envoy (#8569)	4 years ago
Daniel Nephin	068b43df90	Enable gofmt simplify ... Code changes done automatically with 'gofmt -s -w'	5 years ago
freddygv	19e3954603	Move compound service names to use ServiceName type	5 years ago
Freddy	9ed325ba8b	Enable gateways to resolve hostnames to IPv4 addresses (#7999) ... The DNS resolution will be handled by Envoy and defaults to LOGICAL_DNS. This discovery type can be overridden on a per-gateway basis with the envoy_dns_discovery_type Gateway Option. If a service contains an instance with a hostname as an address we set the Envoy cluster to use DNS as the discovery type rather than EDS. Since both mesh gateways and terminating gateways route to clusters using SNI, whenever there is a mix of hostnames and IP addresses associated with a service we use the hostname + CDS rather than the IPs + EDS. Note that we detect hostnames by attempting to parse the service instance's address as an IP. If it is not a valid IP we assume it is a hostname.	5 years ago
Chris Piraino	0bd5618cb2	Cleanup proxycfg for TLS ... - Use correct enterprise metadata for finding config entry - nil out cancel functions on config snapshot copy - Look at HostsSet when checking validity	5 years ago
Kyle Havlovitz	f14c54e25e	Add TLS option and DNS SAN support to ingress config ... xds: Only set TLS context for ingress listener when requested	5 years ago
Chris Piraino	881760f701	xds: Use only the port number as the configured route name ... This removes duplication of protocol from the stats_prefix	5 years ago
Kyle Havlovitz	247f9eaf13	Allow ingress gateways to route traffic based on Host header ... This commit adds the necessary changes to allow an ingress gateway to route traffic from a single defined port to multiple different upstream services in the Consul mesh. To do this, we now require all HTTP requests coming into the ingress gateway to specify a Host header that matches "<service-name>.*" in order to correctly route traffic to the correct service. - Differentiate multiple listener's route names by port - Adds a case in xds for allowing default discovery chains to create a route configuration when on an ingress gateway. This allows default services to easily use host header routing - ingress-gateways have a single route config for each listener that utilizes domain matching to route to different services.	5 years ago
Freddy	137a2c32c6	TLS Origination for Terminating Gateways (#7671)	5 years ago
freddygv	034d7d83d4	Fix snapshot IsEmpty	5 years ago
freddygv	c0e1751878	Allow terminating-gateway to setup listener before servicegroups are known	5 years ago
freddygv	913b13f31f	Add subset support	5 years ago
freddygv	24207226ca	Add proxycfg state management for terminating-gateways	5 years ago
Kyle Havlovitz	e9e8c0e730	Ingress Gateways for TCP services (#7509) ... * Implements a simple, tcp ingress gateway workflow This adds a new type of gateway for allowing Ingress traffic into Connect from external services. Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>	5 years ago
R.B. Boyer	6adad71125	wan federation via mesh gateways (#6884) ... This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch: There are several distinct chunks of code that are affected: * new flags and config options for the server * retry join WAN is slightly different * retry join code is shared to discover primary mesh gateways from secondary datacenters * because retry join logic runs in the *agent* and the results of that operation for primary mesh gateways are needed in the *server* there are some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur at multiple layers of abstraction just to pass the data down to the right layer. * new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers * the function signature for RPC dialing picked up a new required field (the node name of the destination) * several new RPCs for manipulating a FederationState object: `FederationState:{Apply,Get,List,ListMeshGateways}` * 3 read-only internal APIs for debugging use to invoke those RPCs from curl * raft and fsm changes to persist these FederationStates * replication for FederationStates as they are canonically stored in the Primary and replicated to the Secondaries. * a special derivative of anti-entropy that runs in secondaries to snapshot their local mesh gateway `CheckServiceNodes` and sync them into their upstream FederationState in the primary (this works in conjunction with the replication to distribute addresses for all mesh gateways in all DCs to all other DCs) * a "gateway locator" convenience object to make use of this data to choose the addresses of gateways to use for any given RPC or gossip operation to a remote DC. This gets data from the "retry join" logic in the agent and also directly calls into the FSM. * RPC (`:8300`) on the server sniffs the first byte of a new connection to determine if it's actually doing native TLS. If so it checks the ALPN header for protocol determination (just like how the existing system uses the type-byte marker). * 2 new kinds of protocols are exclusively decoded via this native TLS mechanism: one for ferrying "packet" operations (udp-like) from the gossip layer and one for "stream" operations (tcp-like). The packet operations re-use sockets (using length-prefixing) to cut down on TLS re-negotiation overhead. * the server instances specially wrap the `memberlist.NetTransport` when running with gateway federation enabled (in a `wanfed.Transport`). The general gist is that if it tries to dial a node in the SAME datacenter (deduced by looking at the suffix of the node name) there is no change. If dialing a DIFFERENT datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh gateways to eventually end up in a server's :8300 port. * a new flag when launching a mesh gateway via `consul connect envoy` to indicate that the servers are to be exposed. This sets a special service meta when registering the gateway into the catalog. * `proxycfg/xds` notice this metadata blob to activate additional watches for the FederationState objects as well as the location of all of the consul servers in that datacenter. * `xds:` if the extra metadata is in place additional clusters are defined in a DC to bulk sink all traffic to another DC's gateways. For the current datacenter we listen on a wildcard name (`server.<dc>.consul`) that load balances all servers as well as one mini-cluster per node (`<node>.server.<dc>.consul`) * the `consul tls cert create` command got a new flag (`-node`) to help create an additional SAN in certs that can be used with this flavor of federation.	5 years ago
Matt Keeler	4c9577678e	xDS Mesh Gateway Resolver Subset Fixes (#7294) ... * xDS Mesh Gateway Resolver Subset Fixes The first fix was that clusters were being generated for every service resolver subset regardless of there being any service instances of the associated service in that dc. The previous logic didn’t care at all but now it will omit generating those clusters unless we also have service instances that should be proxied. The second fix was to respect the DefaultSubset of a service resolver so that mesh-gateways would configure the endpoints of the unnamed subset cluster to only those endpoints matched by the default subsets filters. * Refactor the gateway endpoint generation to be a little easier to read	5 years ago
Matt Keeler	c09693e545	Updates to Config Entries and Connect for Namespaces (#7116)	5 years ago
R.B. Boyer	2011f3d7dc	xds: mesh gateway CDS requests are now allowed to receive an empty CDS reply (#6787) ... This is the rest of the fix for #6543 that was incompletely fixed in #6576.	5 years ago
R.B. Boyer	97aa050c20	agent: allow mesh gateways to initialize even if there are no connect services registered yet (#6576) ... Fixes #6543 Also improved some of the proxycfg tests to cover snapshot validity better.	5 years ago
Freddy	fdd10dd8b8	Expose HTTP-based paths through Connect proxy (#6446) ... Fixes: #5396 This PR adds a proxy configuration stanza called expose. These flags register listeners in Connect sidecar proxies to allow requests to specific HTTP paths from outside of the node. This allows services to protect themselves by only listening on the loopback interface, while still accepting traffic from non Connect-enabled services. Under expose there is a boolean checks flag that would automatically expose all registered HTTP and gRPC check paths. This stanza also accepts a paths list to expose individual paths. The primary use case for this functionality would be to expose paths for third parties like Prometheus or the kubelet. Listeners for requests to exposed paths are be configured dynamically at run time. Any time a proxy, or check can be registered, a listener can also be created. In this initial implementation requests to these paths are not authenticated/encrypted.	5 years ago
R.B. Boyer	8e22d80e35	connect: fix failover through a mesh gateway to a remote datacenter (#6259) ... Failover is pushed entirely down to the data plane by creating envoy clusters and putting each successive destination in a different load assignment priority band. For example this shows that normally requests go to 1.2.3.4:8080 but when that fails they go to 6.7.8.9:8080: - name: foo load_assignment: cluster_name: foo policy: overprovisioning_factor: 100000 endpoints: - priority: 0 lb_endpoints: - endpoint: address: socket_address: address: 1.2.3.4 port_value: 8080 - priority: 1 lb_endpoints: - endpoint: address: socket_address: address: 6.7.8.9 port_value: 8080 Mesh gateways route requests based solely on the SNI header tacked onto the TLS layer. Envoy currently only lets you configure the outbound SNI header at the cluster layer. If you try to failover through a mesh gateway you ideally would configure the SNI value per endpoint, but that's not possible in envoy today. This PR introduces a simpler way around the problem for now: 1. We identify any target of failover that will use mesh gateway mode local or remote and then further isolate any resolver node in the compiled discovery chain that has a failover destination set to one of those targets. 2. For each of these resolvers we will perform a small measurement of comparative healths of the endpoints that come back from the health API for the set of primary target and serial failover targets. We walk the list of targets in order and if any endpoint is healthy we return that target, otherwise we move on to the next target. 3. The CDS and EDS endpoints both perform the measurements in (2) for the affected resolver nodes. 4. For CDS this measurement selects which TLS SNI field to use for the cluster (note the cluster is always going to be named for the primary target) 5. For EDS this measurement selects which set of endpoints will populate the cluster. Priority tiered failover is ignored. One of the big downsides to this approach to failover is that the failover detection and correction is going to be controlled by consul rather than deferring that entirely to the data plane as with the prior version. This also means that we are bound to only failover using official health signals and cannot make use of data plane signals like outlier detection to affect failover. In this specific scenario the lack of data plane signals is ok because the effectiveness is already muted by the fact that the ultimate destination endpoints will have their data plane signals scrambled when they pass through the mesh gateway wrapper anyway so we're not losing much. Another related fix is that we now use the endpoint health from the underlying service, not the health of the gateway (regardless of failover mode).	5 years ago
R.B. Boyer	c395affc93	connect: expose an API endpoint to compile the discovery chain (#6248) ... In addition to exposing compilation over the API cleaned up the structures that would be exchanged to be cleaner and easier to support and understand. Also removed ability to configure the envoy OverprovisioningFactor.	5 years ago
Matt Keeler	a7421c160f	Implement mesh gateway management of service subsets ... Fixup some error handling	5 years ago
R.B. Boyer	4bdb690a25	activate most discovery chain features in xDS for envoy (#6024)	5 years ago
Matt Keeler	8d953f5840	Implement Mesh Gateways ... This includes both ingress and egress functionality.	5 years ago
Matt Keeler	813e009a2d	Prepare for having different service kinds that are all generic… (#6013) ... Default to internal error when service kind is unknown	6 years ago
Paul Banks	0f27ffd163	Proxy Config Manager (#4729) ... * Proxy Config Manager This component watches for local state changes on the agent and ensures that each service registered locally with Kind == connect-proxy has it's state being actively populated in the cache. This serves two purposes: 1. For the built-in proxy, it ensures that the state needed to accept connections is available in RAM shortly after registration and likely before the proxy actually starts accepting traffic. 2. For (future - next PR) xDS server and other possible future proxies that require _push_ based config discovery, this provides a mechanism to subscribe and be notified about updates to a proxy instance's config including upstream service discovery results. * Address review comments * Better comments; Better delivery of latest snapshot for slow watchers; Embed Config * Comment typos * Add upstream Stringer for funsies	6 years ago